struct uart_8250_dma *dma = p->dma;
struct circ_buf *xmit = &p->port.state->xmit;
unsigned long flags;
+ int ret;
dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr,
UART_XMIT_SIZE, DMA_TO_DEVICE);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&p->port);
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port))
- serial8250_tx_dma(p);
+ ret = serial8250_tx_dma(p);
+ if (ret) {
+ dma->tx_err = 1;
+ p->ier |= UART_IER_THRI;
+ serial_port_out(&p->port, UART_IER, p->ier);
+ }
spin_unlock_irqrestore(&p->port.lock, flags);
}
dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
+ dma->rx_running = 0;
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
dmaengine_terminate_all(dma->rxchan);
struct uart_8250_dma *dma = p->dma;
struct circ_buf *xmit = &p->port.state->xmit;
struct dma_async_tx_descriptor *desc;
+ int ret;
if (uart_tx_stopped(&p->port) || dma->tx_running ||
uart_circ_empty(xmit))
dma->tx_addr + xmit->tail,
dma->tx_size, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc)
- return -EBUSY;
+ if (!desc) {
+ ret = -EBUSY;
+ goto err;
+ }
dma->tx_running = 1;
UART_XMIT_SIZE, DMA_TO_DEVICE);
dma_async_issue_pending(dma->txchan);
-
+ if (dma->tx_err) {
+ dma->tx_err = 0;
+ if (p->ier & UART_IER_THRI) {
+ p->ier &= ~UART_IER_THRI;
+ serial_out(p, UART_IER, p->ier);
+ }
+ }
return 0;
+err:
+ dma->tx_err = 1;
+ return ret;
}
-EXPORT_SYMBOL_GPL(serial8250_tx_dma);
int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
{
struct uart_8250_dma *dma = p->dma;
struct dma_async_tx_descriptor *desc;
- struct dma_tx_state state;
- int dma_status;
-
- dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
switch (iir & 0x3f) {
case UART_IIR_RLSI:
* If RCVR FIFO trigger level was not reached, complete the
* transfer and let 8250_core copy the remaining data.
*/
- if (dma_status == DMA_IN_PROGRESS) {
+ if (dma->rx_running) {
dmaengine_pause(dma->rxchan);
__dma_rx_complete(p);
}
break;
}
- if (dma_status)
+ if (dma->rx_running)
return 0;
desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
if (!desc)
return -EBUSY;
+ dma->rx_running = 1;
desc->callback = __dma_rx_complete;
desc->callback_param = p;
return 0;
}
-EXPORT_SYMBOL_GPL(serial8250_rx_dma);
int serial8250_request_dma(struct uart_8250_port *p)
{