#include <linux/usb/chipidea.h>
#include <linux/usb/of.h>
#include <linux/of.h>
-#include <linux/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/usb/ehci_def.h>
[OP_ENDPTLISTADDR] = 0x18U,
[OP_TTCTRL] = 0x1CU,
[OP_BURSTSIZE] = 0x20U,
+ [OP_ULPI_VIEWPORT] = 0x30U,
[OP_PORTSC] = 0x44U,
[OP_DEVLC] = 0x84U,
[OP_OTGSC] = 0x64U,
[OP_ENDPTLISTADDR] = 0x18U,
[OP_TTCTRL] = 0x1CU,
[OP_BURSTSIZE] = 0x20U,
+ [OP_ULPI_VIEWPORT] = 0x30U,
[OP_PORTSC] = 0x44U,
[OP_DEVLC] = 0x84U,
[OP_OTGSC] = 0xC4U,
return 0;
}
-static void hw_phymode_configure(struct ci_hdrc *ci)
+void hw_phymode_configure(struct ci_hdrc *ci)
{
u32 portsc, lpm, sts = 0;
hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
}
}
+EXPORT_SYMBOL_GPL(hw_phymode_configure);
/**
* _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
*/
static void ci_usb_phy_exit(struct ci_hdrc *ci)
{
+ if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+ return;
+
if (ci->phy) {
phy_power_off(ci->phy);
phy_exit(ci->phy);
{
int ret;
+ if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+ return 0;
+
switch (ci->platdata->phy_mode) {
case USBPHY_INTERFACE_MODE_UTMI:
case USBPHY_INTERFACE_MODE_UTMIW:
is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
- if (is_device_mode &&
- (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING))
- hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+ if (is_device_mode) {
+ phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
+
+ if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
+ hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+ USBMODE_CI_SDIS);
+ }
+
+ if (is_host_mode) {
+ phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
- if (is_host_mode &&
- (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING))
- hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+ if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
+ hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+ USBMODE_CI_SDIS);
+ }
if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
if (ci->hw_bank.lpm)
return ret;
}
- if (ci->platdata->notify_event)
- ci->platdata->notify_event(ci,
+ if (ci->platdata->notify_event) {
+ ret = ci->platdata->notify_event(ci,
CI_HDRC_CONTROLLER_RESET_EVENT);
+ if (ret)
+ return ret;
+ }
/* USBMODE should be configured step by step */
hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
return 0;
}
-/**
- * hw_wait_reg: wait the register value
- *
- * Sometimes, it needs to wait register value before going on.
- * Eg, when switch to device mode, the vbus value should be lower
- * than OTGSC_BSV before connects to host.
- *
- * @ci: the controller
- * @reg: register index
- * @mask: mast bit
- * @value: the bit value to wait
- * @timeout_ms: timeout in millisecond
- *
- * This function returns an error code if timeout
- */
-int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
- u32 value, unsigned int timeout_ms)
-{
- unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
-
- while (hw_read(ci, reg, mask) != value) {
- if (time_after(jiffies, elapse)) {
- dev_err(ci->dev, "timeout waiting for %08x in %d\n",
- mask, reg);
- return -ETIMEDOUT;
- }
- msleep(20);
- }
-
- return 0;
-}
-
static irqreturn_t ci_irq(int irq, void *data)
{
struct ci_hdrc *ci = data;
return ret;
}
-static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event,
- void *ptr)
-{
- struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb);
- struct ci_hdrc *ci = vbus->ci;
-
- if (event)
- vbus->state = true;
- else
- vbus->state = false;
-
- vbus->changed = true;
-
- ci_irq(ci->irq, ci);
- return NOTIFY_DONE;
-}
-
-static int ci_id_notifier(struct notifier_block *nb, unsigned long event,
- void *ptr)
+static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
+ void *ptr)
{
- struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb);
- struct ci_hdrc *ci = id->ci;
+ struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
+ struct ci_hdrc *ci = cbl->ci;
- if (event)
- id->state = false;
- else
- id->state = true;
-
- id->changed = true;
+ cbl->connected = event;
+ cbl->changed = true;
ci_irq(ci->irq, ci);
return NOTIFY_DONE;
}
cable = &platdata->vbus_extcon;
- cable->nb.notifier_call = ci_vbus_notifier;
+ cable->nb.notifier_call = ci_cable_notifier;
cable->edev = ext_vbus;
if (!IS_ERR(ext_vbus)) {
- ret = extcon_get_cable_state_(cable->edev, EXTCON_USB);
+ ret = extcon_get_state(cable->edev, EXTCON_USB);
if (ret)
- cable->state = true;
+ cable->connected = true;
else
- cable->state = false;
+ cable->connected = false;
}
cable = &platdata->id_extcon;
- cable->nb.notifier_call = ci_id_notifier;
+ cable->nb.notifier_call = ci_cable_notifier;
cable->edev = ext_id;
if (!IS_ERR(ext_id)) {
- ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST);
+ ret = extcon_get_state(cable->edev, EXTCON_USB_HOST);
if (ret)
- cable->state = false;
+ cable->connected = true;
else
- cable->state = true;
+ cable->connected = false;
}
return 0;
}
id = &ci->platdata->id_extcon;
id->ci = ci;
if (!IS_ERR(id->edev)) {
- ret = extcon_register_notifier(id->edev, EXTCON_USB_HOST,
- &id->nb);
+ ret = devm_extcon_register_notifier(ci->dev, id->edev,
+ EXTCON_USB_HOST, &id->nb);
if (ret < 0) {
dev_err(ci->dev, "register ID failed\n");
return ret;
vbus = &ci->platdata->vbus_extcon;
vbus->ci = ci;
if (!IS_ERR(vbus->edev)) {
- ret = extcon_register_notifier(vbus->edev, EXTCON_USB,
- &vbus->nb);
+ ret = devm_extcon_register_notifier(ci->dev, vbus->edev,
+ EXTCON_USB, &vbus->nb);
if (ret < 0) {
- extcon_unregister_notifier(id->edev, EXTCON_USB_HOST,
- &id->nb);
dev_err(ci->dev, "register VBUS failed\n");
return ret;
}
return 0;
}
-static void ci_extcon_unregister(struct ci_hdrc *ci)
-{
- struct ci_hdrc_cable *cable;
-
- cable = &ci->platdata->id_extcon;
- if (!IS_ERR(cable->edev))
- extcon_unregister_notifier(cable->edev, EXTCON_USB_HOST,
- &cable->nb);
-
- cable = &ci->platdata->vbus_extcon;
- if (!IS_ERR(cable->edev))
- extcon_unregister_notifier(cable->edev, EXTCON_USB, &cable->nb);
-}
-
static DEFINE_IDA(ci_ida);
struct platform_device *ci_hdrc_add_device(struct device *dev,
CI_HDRC_IMX28_WRITE_FIX);
ci->supports_runtime_pm = !!(ci->platdata->flags &
CI_HDRC_SUPPORTS_RUNTIME_PM);
+ platform_set_drvdata(pdev, ci);
ret = hw_device_init(ci, base);
if (ret < 0) {
return -ENODEV;
}
+ ret = ci_ulpi_init(ci);
+ if (ret)
+ return ret;
+
if (ci->platdata->phy) {
ci->phy = ci->platdata->phy;
} else if (ci->platdata->usb_phy) {
/* if both generic PHY and USB PHY layers aren't enabled */
if (PTR_ERR(ci->phy) == -ENOSYS &&
- PTR_ERR(ci->usb_phy) == -ENXIO)
- return -ENXIO;
+ PTR_ERR(ci->usb_phy) == -ENXIO) {
+ ret = -ENXIO;
+ goto ulpi_exit;
+ }
- if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy))
- return -EPROBE_DEFER;
+ if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) {
+ ret = -EPROBE_DEFER;
+ goto ulpi_exit;
+ }
if (IS_ERR(ci->phy))
ci->phy = NULL;
}
}
- platform_set_drvdata(pdev, ci);
ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
ci->platdata->name, ci);
if (ret)
if (!ret)
return 0;
- ci_extcon_unregister(ci);
stop:
ci_role_destroy(ci);
deinit_phy:
ci_usb_phy_exit(ci);
+ulpi_exit:
+ ci_ulpi_exit(ci);
return ret;
}
}
dbg_remove_files(ci);
- ci_extcon_unregister(ci);
ci_role_destroy(ci);
ci_hdrc_enter_lpm(ci, true);
ci_usb_phy_exit(ci);
+ ci_ulpi_exit(ci);
return 0;
}
static int ci_controller_resume(struct device *dev)
{
struct ci_hdrc *ci = dev_get_drvdata(dev);
+ int ret;
dev_dbg(dev, "at %s\n", __func__);
}
ci_hdrc_enter_lpm(ci, false);
+
+ ret = ci_ulpi_resume(ci);
+ if (ret)
+ return ret;
+
if (ci->usb_phy) {
usb_phy_set_suspend(ci->usb_phy, 0);
usb_phy_set_wakeup(ci->usb_phy, false);
projects / mirror_ubuntu-artful-kernel.git / blobdiff