* message.c - synchronous message handling
*/
-#include <linux/config.h>
#include <linux/pci.h> /* for scatterlist macros */
#include <linux/usb.h>
#include <linux/module.h>
#include "hcd.h" /* for usbcore internals */
#include "usb.h"
-static void usb_api_blocking_completion(struct urb *urb, struct pt_regs *regs)
+static void usb_api_blocking_completion(struct urb *urb)
{
complete((struct completion *)urb->context);
}
-static void timeout_kill(unsigned long data)
-{
- struct urb *urb = (struct urb *) data;
-
- usb_unlink_urb(urb);
-}
-
-// Starts urb and waits for completion or timeout
-// note that this call is NOT interruptible, while
-// many device driver i/o requests should be interruptible
-static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
+/*
+ * Starts urb and waits for completion or timeout. Note that this call
+ * is NOT interruptible. Many device driver i/o requests should be
+ * interruptible and therefore these drivers should implement their
+ * own interruptible routines.
+ */
+static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
{
- struct completion done;
- struct timer_list timer;
- int status;
+ struct completion done;
+ unsigned long expire;
+ int status;
init_completion(&done);
urb->context = &done;
urb->actual_length = 0;
status = usb_submit_urb(urb, GFP_NOIO);
-
- if (status == 0) {
- if (timeout > 0) {
- init_timer(&timer);
- timer.expires = jiffies + msecs_to_jiffies(timeout);
- timer.data = (unsigned long)urb;
- timer.function = timeout_kill;
- /* grr. timeout _should_ include submit delays. */
- add_timer(&timer);
- }
- wait_for_completion(&done);
+ if (unlikely(status))
+ goto out;
+
+ expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT;
+ if (!wait_for_completion_timeout(&done, expire)) {
+
+ dev_dbg(&urb->dev->dev,
+ "%s timed out on ep%d%s len=%d/%d\n",
+ current->comm,
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out",
+ urb->actual_length,
+ urb->transfer_buffer_length);
+
+ usb_kill_urb(urb);
+ status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status;
+ } else
status = urb->status;
- /* note: HCDs return ETIMEDOUT for other reasons too */
- if (status == -ECONNRESET) {
- dev_dbg(&urb->dev->dev,
- "%s timed out on ep%d%s len=%d/%d\n",
- current->comm,
- usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out",
- urb->actual_length,
- urb->transfer_buffer_length
- );
- if (urb->actual_length > 0)
- status = 0;
- else
- status = -ETIMEDOUT;
- }
- if (timeout > 0)
- del_timer_sync(&timer);
- }
-
+out:
if (actual_length)
*actual_length = urb->actual_length;
+
usb_free_urb(urb);
return status;
}
io->dev = NULL;
}
-static void sg_complete (struct urb *urb, struct pt_regs *regs)
+static void sg_complete (struct urb *urb)
{
- struct usb_sg_request *io = (struct usb_sg_request *) urb->context;
+ struct usb_sg_request *io = urb->context;
spin_lock (&io->lock);
ep = dev->ep_in[epnum];
dev->ep_in[epnum] = NULL;
}
- if (ep && dev->bus && dev->bus->op && dev->bus->op->disable)
- dev->bus->op->disable(dev, ep);
+ if (ep && dev->bus)
+ usb_hcd_endpoint_disable(dev, ep);
}
/**
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
- if (dev->state == USB_STATE_SUSPENDED)
- return -EHOSTUNREACH;
-
/* Allocate memory for new interfaces before doing anything else,
* so that if we run out then nothing will have changed. */
n = nintf = 0;
configuration, -i);
}
+ /* Wake up the device so we can send it the Set-Config request */
+ ret = usb_autoresume_device(dev, 1);
+ if (ret)
+ goto free_interfaces;
+
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
dev->actconfig = cp;
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
+ usb_autosuspend_device(dev, 1);
goto free_interfaces;
}
usb_set_device_state(dev, USB_STATE_CONFIGURED);
usb_create_sysfs_intf_files (intf);
}
+ usb_autosuspend_device(dev, 1);
+ return 0;
+}
+
+struct set_config_request {
+ struct usb_device *udev;
+ int config;
+ struct work_struct work;
+};
+
+/* Worker routine for usb_driver_set_configuration() */
+static void driver_set_config_work(void *_req)
+{
+ struct set_config_request *req = _req;
+
+ usb_lock_device(req->udev);
+ usb_set_configuration(req->udev, req->config);
+ usb_unlock_device(req->udev);
+ usb_put_dev(req->udev);
+ kfree(req);
+}
+
+/**
+ * usb_driver_set_configuration - Provide a way for drivers to change device configurations
+ * @udev: the device whose configuration is being updated
+ * @config: the configuration being chosen.
+ * Context: In process context, must be able to sleep
+ *
+ * Device interface drivers are not allowed to change device configurations.
+ * This is because changing configurations will destroy the interface the
+ * driver is bound to and create new ones; it would be like a floppy-disk
+ * driver telling the computer to replace the floppy-disk drive with a
+ * tape drive!
+ *
+ * Still, in certain specialized circumstances the need may arise. This
+ * routine gets around the normal restrictions by using a work thread to
+ * submit the change-config request.
+ *
+ * Returns 0 if the request was succesfully queued, error code otherwise.
+ * The caller has no way to know whether the queued request will eventually
+ * succeed.
+ */
+int usb_driver_set_configuration(struct usb_device *udev, int config)
+{
+ struct set_config_request *req;
+
+ req = kmalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+ req->udev = udev;
+ req->config = config;
+ INIT_WORK(&req->work, driver_set_config_work, req);
+
+ usb_get_dev(udev);
+ if (!schedule_work(&req->work)) {
+ usb_put_dev(udev);
+ kfree(req);
+ return -EINVAL;
+ }
return 0;
}
+EXPORT_SYMBOL_GPL(usb_driver_set_configuration);
// synchronous request completion model
EXPORT_SYMBOL(usb_control_msg);
projects / mirror_ubuntu-artful-kernel.git / blobdiff