tristate "Support for frame buffer devices"
select FB_CMDLINE
select FB_NOTIFY
- ---help---
+ help
The frame buffer device provides an abstraction for the graphics
hardware. It represents the frame buffer of some video hardware and
allows application software to access the graphics hardware through
config FIRMWARE_EDID
bool "Enable firmware EDID"
depends on FB
- ---help---
+ help
This enables access to the EDID transferred from the firmware.
On the i386, this is from the Video BIOS. Enable this if DDC/I2C
transfers do not work for your driver and if you are using
config FB_BOOT_VESA_SUPPORT
bool
depends on FB
- ---help---
+ help
If true, at least one selected framebuffer driver can take advantage
of VESA video modes set at an early boot stage via the vga= parameter.
config FB_CFB_FILLRECT
tristate
depends on FB
- ---help---
+ help
Include the cfb_fillrect function for generic software rectangle
filling. This is used by drivers that don't provide their own
(accelerated) version.
config FB_CFB_COPYAREA
tristate
depends on FB
- ---help---
+ help
Include the cfb_copyarea function for generic software area copying.
This is used by drivers that don't provide their own (accelerated)
version.
config FB_CFB_IMAGEBLIT
tristate
depends on FB
- ---help---
+ help
Include the cfb_imageblit function for generic software image
blitting. This is used by drivers that don't provide their own
(accelerated) version.
config FB_CFB_REV_PIXELS_IN_BYTE
bool
depends on FB
- ---help---
+ help
Allow generic frame-buffer functions to work on displays with 1, 2
and 4 bits per pixel depths which has opposite order of pixels in
byte order to bytes in long order.
config FB_SYS_FILLRECT
tristate
depends on FB
- ---help---
+ help
Include the sys_fillrect function for generic software rectangle
filling. This is used by drivers that don't provide their own
(accelerated) version and the framebuffer is in system RAM.
config FB_SYS_COPYAREA
tristate
depends on FB
- ---help---
+ help
Include the sys_copyarea function for generic software area copying.
This is used by drivers that don't provide their own (accelerated)
version and the framebuffer is in system RAM.
config FB_SYS_IMAGEBLIT
tristate
depends on FB
- ---help---
+ help
Include the sys_imageblit function for generic software image
blitting. This is used by drivers that don't provide their own
(accelerated) version and the framebuffer is in system RAM.
config FB_PROVIDE_GET_FB_UNMAPPED_AREA
bool
depends on FB
- ---help---
+ help
Allow generic frame-buffer to provide get_fb_unmapped_area
function.
menuconfig FB_FOREIGN_ENDIAN
bool "Framebuffer foreign endianness support"
depends on FB
- ---help---
+ help
This menu will let you enable support for the framebuffers with
non-native endianness (e.g. Little-Endian framebuffer on a
Big-Endian machine). Most probably you don't have such hardware,
config FB_SVGALIB
tristate
depends on FB
- ---help---
+ help
Common utility functions useful to fbdev drivers of VGA-based
cards.
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
- ---help---
+ help
This enables functions for handling video modes using the
Generalized Timing Formula and the EDID parser. A few drivers rely
on this feature such as the radeonfb, rivafb, and the i810fb. If
config FB_TILEBLITTING
bool "Enable Tile Blitting Support"
depends on FB
- ---help---
+ help
This enables tile blitting. Tile blitting is a drawing technique
where the screen is divided into rectangular sections (tiles), whereas
the standard blitting divides the screen into pixels. Because the
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
config FB_CIRRUS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
default y
- ---help---
+ help
STI refers to the HP "Standard Text Interface" which is a set of
BIOS routines contained in a ROM chip in HP PA-RISC based machines.
Enabling this option will implement the linux framebuffer device
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
- ---help---
+ help
This is the frame buffer device driver for generic TGA and SFB+
graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
This driver may or may not work on other PowerVR 2 cards, but is
config FB_INTEL_DEBUG
bool "Intel driver Debug Messages"
depends on FB_INTEL
- ---help---
+ help
Say Y here if you want the Intel driver to output all sorts
of debugging information to provide to the maintainer when
something goes wrong.
select FB_CFB_IMAGEBLIT
select FB_TILEBLITTING
select FB_MACMODES if PPC_PMAC
- ---help---
+ help
Say Y here if you have a Matrox Millennium, Matrox Millennium II,
Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
config FB_MATROX_G
bool "G100/G200/G400/G450/G550 support"
depends on FB_MATROX
- ---help---
+ help
Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
video card. If you select "Advanced lowlevel driver options", you
should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
tristate "Matrox I2C support"
depends on FB_MATROX
select FB_DDC
- ---help---
+ help
This drivers creates I2C buses which are needed for accessing the
DDC (I2C) bus present on all Matroxes, an I2C bus which
interconnects Matrox optional devices, like MGA-TVO on G200 and
config FB_MATROX_MAVEN
tristate "G400 second head support"
depends on FB_MATROX_G && FB_MATROX_I2C
- ---help---
+ help
WARNING !!! This support does not work with G450 !!!
Say Y or M here if you want to use a secondary head (meaning two
select FB_SVGALIB
select VGASTATE
select FONT_8x16 if FRAMEBUFFER_CONSOLE
- ---help---
+ help
Driver for graphics boards with S3 Trio / S3 Virge chip.
config FB_S3_DDC
config FB_3DFX_ACCEL
bool "3Dfx Acceleration functions"
depends on FB_3DFX
- ---help---
+ help
This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
device driver with acceleration functions.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
Voodoo2 (cvg) based graphics card.
select FB_SVGALIB
select VGASTATE
select FONT_8x16 if FRAMEBUFFER_CONSOLE
- ---help---
+ help
Driver for CastleRock integrated graphics core in the
VIA VT8623 [Apollo CLE266] chipset.
select FB_CFB_IMAGEBLIT
select FB_DDC
select FB_MODE_HELPERS
- ---help---
+ help
This is the frame buffer device driver for Trident PCI/AGP chipsets.
Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
and Blade XP.
select FB_SVGALIB
select VGASTATE
select FONT_8x16 if FRAMEBUFFER_CONSOLE
- ---help---
+ help
Driver for PCI graphics boards with ARK 2000PV chip
and ICS 5342 RAMDAC.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Frame buffer driver for the built-in LCD controller in the Marvell
MMP processor.
select FB_CFB_IMAGEBLIT
select VIDEOMODE_HELPERS if OF
select FB_MODE_HELPERS if OF
- ---help---
+ help
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
config FB_PXA_PARAMETERS
bool "PXA LCD command line parameters"
depends on FB_PXA
- ---help---
+ help
Enable the use of kernel command line or module parameters
to configure the physical properties of the LCD panel when
using the PXA LCD driver.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Framebuffer driver for the Intel 2700G (Marathon) Graphics
Accelerator
config FB_MBX_DEBUG
bool "Enable debugging info via debugfs"
depends on FB_MBX && DEBUG_FS
- ---help---
+ help
Enable this if you want debugging information using the debug
filesystem (debugfs)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select PPC_LIB_RHEAP
- ---help---
+ help
Framebuffer driver for the Freescale SoC DIU
config FB_W100
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
It can also drive the w3220 chip found on iPAQ hx4700.
select FB_SYS_FOPS
select FB_DEFERRED_IO
select FB_BACKLIGHT
- ---help---
+ help
Frame buffer driver for the on-chip SH-Mobile LCD controller.
config FB_TMIO
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Frame buffer driver for the Toshiba Mobile IO integrated as found
on the Sharp SL-6000 series
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Frame buffer driver for the built-in FB controller in the Samsung
SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
and the S3C64XX series such as the S3C6400 and S3C6410.
config FB_S3C_DEBUG_REGWRITE
bool "Debug register writes"
depends on FB_S3C
- ---help---
+ help
Show all register writes via pr_debug()
config FB_S3C2410
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Frame buffer driver for the built-in LCD controller in the Samsung
S3C2410 processor.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Frame buffer driver for the CRT and LCD controllers in the Silicon
Motion SM501.
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
- ---help---
+ help
This is a kernel framebuffer driver for SMSC UFX USB devices.
Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
- ---help---
+ help
This is a kernel framebuffer driver for DisplayLink USB devices.
Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Say Y here to enable support for the IBM GXT4000P/6000P and
GXT4500P/6500P display adaptor based on Raster Engine RC1000,
found on some IBM System P (pSeries) machines. This driver
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
- ---help---
+ help
Include support for the virtual frame buffer in the PS3 platform.
config FB_PS3_DEFAULT_SIZE_M
int "PS3 default frame buffer size (in MiB)"
depends on FB_PS3
default 9
- ---help---
+ help
This is the default size (in MiB) of the virtual frame buffer in
the PS3.
The default value can be overridden on the kernel command line
config FB_XILINX
tristate "Xilinx frame buffer support"
- depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+ depends on FB && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Include support for the Xilinx ML300/ML403 reference design
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Framebuffer driver for Goldfish Virtual Platform
config FB_COBALT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Support for the SH7760/SH7763/SH7720/SH7721 integrated
(D)STN/TFT LCD Controller.
Supports display resolutions up to 1024x1024 pixel, grayscale and
select FB_CFB_REV_PIXELS_IN_BYTE
select FB_MODE_HELPERS
select VIDEOMODE_HELPERS
- ---help---
+ help
This is the frame buffer device driver for the TI LCD controller
found on DA8xx/OMAP-L1xx/AM335x SoCs.
If unsure, say N.
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
- ---help---
+ help
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
board. This means you cannot see any output sent to this frame
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
choice
config FB_MB862XX_PCI_GDC
bool "Carmine/Coral-P(A) GDC"
depends on PCI
- ---help---
+ help
This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
PCI graphics controller devices.
depends on OF && PPC
select FB_FOREIGN_ENDIAN
select FB_LITTLE_ENDIAN
- ---help---
+ help
Framebuffer support for Fujitsu Lime GDC on host CPU bus.
endchoice
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
Framebuffer driver for the Cirrus Logic EP93XX series of processors.
This driver is also available as a module. The module will be called
ep93xx-fb.
config FB_PRE_INIT_FB
bool "Don't reinitialize, use bootloader's GDC/Display configuration"
depends on FB && FB_MB862XX_LIME
- ---help---
+ help
Select this option if display contents should be inherited as set by
the bootloader.
projects / mirror_ubuntu-jammy-kernel.git / blobdiff