{
#if defined(TARGET_MIPS)
return status->snan_bit_is_one;
-#elif defined(TARGET_HPPA) || defined(TARGET_UNICORE32) || defined(TARGET_SH4)
+#elif defined(TARGET_HPPA) || defined(TARGET_SH4)
return 1;
#else
return 0;
| The pattern for a default generated deconstructed floating-point NaN.
*----------------------------------------------------------------------------*/
-static FloatParts parts_default_nan(float_status *status)
+static void parts64_default_nan(FloatParts64 *p, float_status *status)
{
bool sign = 0;
uint64_t frac;
sign = 1;
frac = ~0ULL;
#else
- /* This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V,
- * S390, SH4, TriCore, and Xtensa. I cannot find documentation
- * for Unicore32; the choice from the original commit is unchanged.
- * Our other supported targets, CRIS, LM32, Moxie, Nios2, and Tile,
- * do not have floating-point.
+ /*
+ * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V,
+ * S390, SH4, TriCore, and Xtensa. Our other supported targets,
+ * CRIS, Nios2, and Tile, do not have floating-point.
*/
if (snan_bit_is_one(status)) {
/* set all bits other than msb */
}
#endif
- return (FloatParts) {
+ *p = (FloatParts64) {
.cls = float_class_qnan,
.sign = sign,
.exp = INT_MAX,
};
}
+static void parts128_default_nan(FloatParts128 *p, float_status *status)
+{
+ /*
+ * Extrapolate from the choices made by parts64_default_nan to fill
+ * in the quad-floating format. If the low bit is set, assume we
+ * want to set all non-snan bits.
+ */
+ FloatParts64 p64;
+ parts64_default_nan(&p64, status);
+
+ *p = (FloatParts128) {
+ .cls = float_class_qnan,
+ .sign = p64.sign,
+ .exp = INT_MAX,
+ .frac_hi = p64.frac,
+ .frac_lo = -(p64.frac & 1)
+ };
+}
+
/*----------------------------------------------------------------------------
| Returns a quiet NaN from a signalling NaN for the deconstructed
| floating-point parts.
*----------------------------------------------------------------------------*/
-static FloatParts parts_silence_nan(FloatParts a, float_status *status)
+static uint64_t parts_silence_nan_frac(uint64_t frac, float_status *status)
{
g_assert(!no_signaling_nans(status));
-#if defined(TARGET_HPPA)
- a.frac &= ~(1ULL << (DECOMPOSED_BINARY_POINT - 1));
- a.frac |= 1ULL << (DECOMPOSED_BINARY_POINT - 2);
-#else
+ g_assert(!status->default_nan_mode);
+
+ /* The only snan_bit_is_one target without default_nan_mode is HPPA. */
if (snan_bit_is_one(status)) {
- return parts_default_nan(status);
+ frac &= ~(1ULL << (DECOMPOSED_BINARY_POINT - 1));
+ frac |= 1ULL << (DECOMPOSED_BINARY_POINT - 2);
} else {
- a.frac |= 1ULL << (DECOMPOSED_BINARY_POINT - 1);
+ frac |= 1ULL << (DECOMPOSED_BINARY_POINT - 1);
}
-#endif
- a.cls = float_class_qnan;
- return a;
+ return frac;
+}
+
+static void parts64_silence_nan(FloatParts64 *p, float_status *status)
+{
+ p->frac = parts_silence_nan_frac(p->frac, status);
+ p->cls = float_class_qnan;
+}
+
+static void parts128_silence_nan(FloatParts128 *p, float_status *status)
+{
+ p->frac_hi = parts_silence_nan_frac(p->frac_hi, status);
+ p->cls = float_class_qnan;
}
/*----------------------------------------------------------------------------
const floatx80 floatx80_infinity
= make_floatx80_init(floatx80_infinity_high, floatx80_infinity_low);
-/*----------------------------------------------------------------------------
-| Raises the exceptions specified by `flags'. Floating-point traps can be
-| defined here if desired. It is currently not possible for such a trap
-| to substitute a result value. If traps are not implemented, this routine
-| should be simply `float_exception_flags |= flags;'.
-*----------------------------------------------------------------------------*/
-
-void float_raise(uint8_t flags, float_status *status)
-{
- status->float_exception_flags |= flags;
-}
-
-/*----------------------------------------------------------------------------
-| Internal canonical NaN format.
-*----------------------------------------------------------------------------*/
-typedef struct {
- bool sign;
- uint64_t high, low;
-} commonNaNT;
-
/*----------------------------------------------------------------------------
| Returns 1 if the half-precision floating-point value `a' is a quiet
| NaN; otherwise returns 0.
}
}
-/*----------------------------------------------------------------------------
-| Returns the result of converting the single-precision floating-point NaN
-| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid
-| exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT float32ToCommonNaN(float32 a, float_status *status)
-{
- commonNaNT z;
-
- if (float32_is_signaling_nan(a, status)) {
- float_raise(float_flag_invalid, status);
- }
- z.sign = float32_val(a) >> 31;
- z.low = 0;
- z.high = ((uint64_t)float32_val(a)) << 41;
- return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the single-
-| precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static float32 commonNaNToFloat32(commonNaNT a, float_status *status)
-{
- uint32_t mantissa = a.high >> 41;
-
- if (status->default_nan_mode) {
- return float32_default_nan(status);
- }
-
- if (mantissa) {
- return make_float32(
- (((uint32_t)a.sign) << 31) | 0x7F800000 | (a.high >> 41));
- } else {
- return float32_default_nan(status);
- }
-}
-
/*----------------------------------------------------------------------------
| Select which NaN to propagate for a two-input operation.
| IEEE754 doesn't specify all the details of this, so the
} else {
return 1;
}
+#elif defined(TARGET_RISCV)
+ /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */
+ if (infzero) {
+ float_raise(float_flag_invalid, status);
+ }
+ return 3; /* default NaN */
#elif defined(TARGET_XTENSA)
/*
* For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns
#endif
}
-/*----------------------------------------------------------------------------
-| Takes two single-precision floating-point values `a' and `b', one of which
-| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a
-| signaling NaN, the invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static float32 propagateFloat32NaN(float32 a, float32 b, float_status *status)
-{
- bool aIsLargerSignificand;
- uint32_t av, bv;
- FloatClass a_cls, b_cls;
-
- /* This is not complete, but is good enough for pickNaN. */
- a_cls = (!float32_is_any_nan(a)
- ? float_class_normal
- : float32_is_signaling_nan(a, status)
- ? float_class_snan
- : float_class_qnan);
- b_cls = (!float32_is_any_nan(b)
- ? float_class_normal
- : float32_is_signaling_nan(b, status)
- ? float_class_snan
- : float_class_qnan);
-
- av = float32_val(a);
- bv = float32_val(b);
-
- if (is_snan(a_cls) || is_snan(b_cls)) {
- float_raise(float_flag_invalid, status);
- }
-
- if (status->default_nan_mode) {
- return float32_default_nan(status);
- }
-
- if ((uint32_t)(av << 1) < (uint32_t)(bv << 1)) {
- aIsLargerSignificand = 0;
- } else if ((uint32_t)(bv << 1) < (uint32_t)(av << 1)) {
- aIsLargerSignificand = 1;
- } else {
- aIsLargerSignificand = (av < bv) ? 1 : 0;
- }
-
- if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) {
- if (is_snan(b_cls)) {
- return float32_silence_nan(b, status);
- }
- return b;
- } else {
- if (is_snan(a_cls)) {
- return float32_silence_nan(a, status);
- }
- return a;
- }
-}
-
/*----------------------------------------------------------------------------
| Returns 1 if the double-precision floating-point value `a' is a quiet
| NaN; otherwise returns 0.
}
}
-/*----------------------------------------------------------------------------
-| Returns the result of converting the double-precision floating-point NaN
-| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid
-| exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT float64ToCommonNaN(float64 a, float_status *status)
-{
- commonNaNT z;
-
- if (float64_is_signaling_nan(a, status)) {
- float_raise(float_flag_invalid, status);
- }
- z.sign = float64_val(a) >> 63;
- z.low = 0;
- z.high = float64_val(a) << 12;
- return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the double-
-| precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static float64 commonNaNToFloat64(commonNaNT a, float_status *status)
-{
- uint64_t mantissa = a.high >> 12;
-
- if (status->default_nan_mode) {
- return float64_default_nan(status);
- }
-
- if (mantissa) {
- return make_float64(
- (((uint64_t) a.sign) << 63)
- | UINT64_C(0x7FF0000000000000)
- | (a.high >> 12));
- } else {
- return float64_default_nan(status);
- }
-}
-
-/*----------------------------------------------------------------------------
-| Takes two double-precision floating-point values `a' and `b', one of which
-| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a
-| signaling NaN, the invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static float64 propagateFloat64NaN(float64 a, float64 b, float_status *status)
-{
- bool aIsLargerSignificand;
- uint64_t av, bv;
- FloatClass a_cls, b_cls;
-
- /* This is not complete, but is good enough for pickNaN. */
- a_cls = (!float64_is_any_nan(a)
- ? float_class_normal
- : float64_is_signaling_nan(a, status)
- ? float_class_snan
- : float_class_qnan);
- b_cls = (!float64_is_any_nan(b)
- ? float_class_normal
- : float64_is_signaling_nan(b, status)
- ? float_class_snan
- : float_class_qnan);
-
- av = float64_val(a);
- bv = float64_val(b);
-
- if (is_snan(a_cls) || is_snan(b_cls)) {
- float_raise(float_flag_invalid, status);
- }
-
- if (status->default_nan_mode) {
- return float64_default_nan(status);
- }
-
- if ((uint64_t)(av << 1) < (uint64_t)(bv << 1)) {
- aIsLargerSignificand = 0;
- } else if ((uint64_t)(bv << 1) < (uint64_t)(av << 1)) {
- aIsLargerSignificand = 1;
- } else {
- aIsLargerSignificand = (av < bv) ? 1 : 0;
- }
-
- if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) {
- if (is_snan(b_cls)) {
- return float64_silence_nan(b, status);
- }
- return b;
- } else {
- if (is_snan(a_cls)) {
- return float64_silence_nan(a, status);
- }
- return a;
- }
-}
-
/*----------------------------------------------------------------------------
| Returns 1 if the extended double-precision floating-point value `a' is a
| quiet NaN; otherwise returns 0. This slightly differs from the same
return a;
}
-/*----------------------------------------------------------------------------
-| Returns the result of converting the extended double-precision floating-
-| point NaN `a' to the canonical NaN format. If `a' is a signaling NaN, the
-| invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT floatx80ToCommonNaN(floatx80 a, float_status *status)
-{
- floatx80 dflt;
- commonNaNT z;
-
- if (floatx80_is_signaling_nan(a, status)) {
- float_raise(float_flag_invalid, status);
- }
- if (a.low >> 63) {
- z.sign = a.high >> 15;
- z.low = 0;
- z.high = a.low << 1;
- } else {
- dflt = floatx80_default_nan(status);
- z.sign = dflt.high >> 15;
- z.low = 0;
- z.high = dflt.low << 1;
- }
- return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the extended
-| double-precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static floatx80 commonNaNToFloatx80(commonNaNT a, float_status *status)
-{
- floatx80 z;
-
- if (status->default_nan_mode) {
- return floatx80_default_nan(status);
- }
-
- if (a.high >> 1) {
- z.low = UINT64_C(0x8000000000000000) | a.high >> 1;
- z.high = (((uint16_t)a.sign) << 15) | 0x7FFF;
- } else {
- z = floatx80_default_nan(status);
- }
- return z;
-}
-
/*----------------------------------------------------------------------------
| Takes two extended double-precision floating-point values `a' and `b', one
| of which is a NaN, and returns the appropriate NaN result. If either `a' or
}
}
}
-
-/*----------------------------------------------------------------------------
-| Returns a quiet NaN from a signalling NaN for the quadruple-precision
-| floating point value `a'.
-*----------------------------------------------------------------------------*/
-
-float128 float128_silence_nan(float128 a, float_status *status)
-{
- if (no_signaling_nans(status)) {
- g_assert_not_reached();
- } else {
- if (snan_bit_is_one(status)) {
- return float128_default_nan(status);
- } else {
- a.high |= UINT64_C(0x0000800000000000);
- return a;
- }
- }
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the quadruple-precision floating-point NaN
-| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid
-| exception is raised.
-*----------------------------------------------------------------------------*/
-
-static commonNaNT float128ToCommonNaN(float128 a, float_status *status)
-{
- commonNaNT z;
-
- if (float128_is_signaling_nan(a, status)) {
- float_raise(float_flag_invalid, status);
- }
- z.sign = a.high >> 63;
- shortShift128Left(a.high, a.low, 16, &z.high, &z.low);
- return z;
-}
-
-/*----------------------------------------------------------------------------
-| Returns the result of converting the canonical NaN `a' to the quadruple-
-| precision floating-point format.
-*----------------------------------------------------------------------------*/
-
-static float128 commonNaNToFloat128(commonNaNT a, float_status *status)
-{
- float128 z;
-
- if (status->default_nan_mode) {
- return float128_default_nan(status);
- }
-
- shift128Right(a.high, a.low, 16, &z.high, &z.low);
- z.high |= (((uint64_t)a.sign) << 63) | UINT64_C(0x7FFF000000000000);
- return z;
-}
-
-/*----------------------------------------------------------------------------
-| Takes two quadruple-precision floating-point values `a' and `b', one of
-| which is a NaN, and returns the appropriate NaN result. If either `a' or
-| `b' is a signaling NaN, the invalid exception is raised.
-*----------------------------------------------------------------------------*/
-
-static float128 propagateFloat128NaN(float128 a, float128 b,
- float_status *status)
-{
- bool aIsLargerSignificand;
- FloatClass a_cls, b_cls;
-
- /* This is not complete, but is good enough for pickNaN. */
- a_cls = (!float128_is_any_nan(a)
- ? float_class_normal
- : float128_is_signaling_nan(a, status)
- ? float_class_snan
- : float_class_qnan);
- b_cls = (!float128_is_any_nan(b)
- ? float_class_normal
- : float128_is_signaling_nan(b, status)
- ? float_class_snan
- : float_class_qnan);
-
- if (is_snan(a_cls) || is_snan(b_cls)) {
- float_raise(float_flag_invalid, status);
- }
-
- if (status->default_nan_mode) {
- return float128_default_nan(status);
- }
-
- if (lt128(a.high << 1, a.low, b.high << 1, b.low)) {
- aIsLargerSignificand = 0;
- } else if (lt128(b.high << 1, b.low, a.high << 1, a.low)) {
- aIsLargerSignificand = 1;
- } else {
- aIsLargerSignificand = (a.high < b.high) ? 1 : 0;
- }
-
- if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) {
- if (is_snan(b_cls)) {
- return float128_silence_nan(b, status);
- }
- return b;
- } else {
- if (is_snan(a_cls)) {
- return float128_silence_nan(a, status);
- }
- return a;
- }
-}
projects / mirror_qemu.git / blobdiff