"Inode bitmap not in group (block %llu)",
(unsigned long long)input->inode_bitmap);
else if (outside(input->inode_table, start, end) ||
- outside(itend - 1, start, end))
+ outside(itend - 1, start, end))
ext4_warning(sb, __func__,
"Inode table not in group (blocks %llu-%llu)",
(unsigned long long)input->inode_table, itend - 1);
(unsigned long long)input->inode_bitmap,
start, metaend - 1);
else if (inside(input->inode_table, start, metaend) ||
- inside(itend - 1, start, metaend))
+ inside(itend - 1, start, metaend))
ext4_warning(sb, __func__,
"Inode table (%llu-%llu) overlaps"
"GDT table (%llu-%llu)",
if (err) {
if ((err = ext4_journal_restart(handle, EXT4_MAX_TRANS_DATA)))
return err;
- if ((err = ext4_journal_get_write_access(handle, bh)))
+ if ((err = ext4_journal_get_write_access(handle, bh)))
return err;
- }
+ }
return 0;
}
/*
* If we are not using the primary superblock/GDT copy don't resize,
- * because the user tools have no way of handling this. Probably a
- * bad time to do it anyways.
- */
+ * because the user tools have no way of handling this. Probably a
+ * bad time to do it anyways.
+ */
if (EXT4_SB(sb)->s_sbh->b_blocknr !=
le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
ext4_warning(sb, __func__,
return 0;
exit_inode:
- //ext4_journal_release_buffer(handle, iloc.bh);
+ /* ext4_journal_release_buffer(handle, iloc.bh); */
brelse(iloc.bh);
exit_dindj:
- //ext4_journal_release_buffer(handle, dind);
+ /* ext4_journal_release_buffer(handle, dind); */
exit_primary:
- //ext4_journal_release_buffer(handle, *primary);
+ /* ext4_journal_release_buffer(handle, *primary); */
exit_sbh:
- //ext4_journal_release_buffer(handle, *primary);
+ /* ext4_journal_release_buffer(handle, *primary); */
exit_dind:
brelse(dind);
exit_bh:
if (reserved_gdb || gdb_off == 0) {
if (!EXT4_HAS_COMPAT_FEATURE(sb,
- EXT4_FEATURE_COMPAT_RESIZE_INODE)){
+ EXT4_FEATURE_COMPAT_RESIZE_INODE)
+ || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
ext4_warning(sb, __func__,
"No reserved GDT blocks, can't resize");
return -EPERM;
if ((err = ext4_journal_get_write_access(handle, sbi->s_sbh)))
goto exit_journal;
- /*
- * We will only either add reserved group blocks to a backup group
- * or remove reserved blocks for the first group in a new group block.
- * Doing both would be mean more complex code, and sane people don't
- * use non-sparse filesystems anymore. This is already checked above.
- */
+ /*
+ * We will only either add reserved group blocks to a backup group
+ * or remove reserved blocks for the first group in a new group block.
+ * Doing both would be mean more complex code, and sane people don't
+ * use non-sparse filesystems anymore. This is already checked above.
+ */
if (gdb_off) {
primary = sbi->s_group_desc[gdb_num];
if ((err = ext4_journal_get_write_access(handle, primary)))
} else if ((err = add_new_gdb(handle, inode, input, &primary)))
goto exit_journal;
- /*
- * OK, now we've set up the new group. Time to make it active.
- *
- * Current kernels don't lock all allocations via lock_super(),
- * so we have to be safe wrt. concurrent accesses the group
- * data. So we need to be careful to set all of the relevant
- * group descriptor data etc. *before* we enable the group.
- *
- * The key field here is sbi->s_groups_count: as long as
- * that retains its old value, nobody is going to access the new
- * group.
- *
- * So first we update all the descriptor metadata for the new
- * group; then we update the total disk blocks count; then we
- * update the groups count to enable the group; then finally we
- * update the free space counts so that the system can start
- * using the new disk blocks.
- */
+ /*
+ * OK, now we've set up the new group. Time to make it active.
+ *
+ * Current kernels don't lock all allocations via lock_super(),
+ * so we have to be safe wrt. concurrent accesses the group
+ * data. So we need to be careful to set all of the relevant
+ * group descriptor data etc. *before* we enable the group.
+ *
+ * The key field here is sbi->s_groups_count: as long as
+ * that retains its old value, nobody is going to access the new
+ * group.
+ *
+ * So first we update all the descriptor metadata for the new
+ * group; then we update the total disk blocks count; then we
+ * update the groups count to enable the group; then finally we
+ * update the free space counts so that the system can start
+ * using the new disk blocks.
+ */
/* Update group descriptor block for new group */
gdp = (struct ext4_group_desc *)((char *)primary->b_data +
* We can allocate memory for mb_alloc based on the new group
* descriptor
*/
- if (test_opt(sb, MBALLOC)) {
- err = ext4_mb_add_more_groupinfo(sb, input->group, gdp);
- if (err)
- goto exit_journal;
- }
+ err = ext4_mb_add_more_groupinfo(sb, input->group, gdp);
+ if (err)
+ goto exit_journal;
+
/*
* Make the new blocks and inodes valid next. We do this before
* increasing the group count so that once the group is enabled,
percpu_counter_add(&sbi->s_freeinodes_counter,
EXT4_INODES_PER_GROUP(sb));
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+ ext4_group_t flex_group;
+ flex_group = ext4_flex_group(sbi, input->group);
+ sbi->s_flex_groups[flex_group].free_blocks +=
+ input->free_blocks_count;
+ sbi->s_flex_groups[flex_group].free_inodes +=
+ EXT4_INODES_PER_GROUP(sb);
+ }
+
ext4_journal_dirty_metadata(handle, sbi->s_sbh);
sb->s_dirt = 1;
return err;
} /* ext4_group_add */
-/* Extend the filesystem to the new number of blocks specified. This entry
+/*
+ * Extend the filesystem to the new number of blocks specified. This entry
* point is only used to extend the current filesystem to the end of the last
* existing group. It can be accessed via ioctl, or by "remount,resize=<size>"
* for emergencies (because it has no dependencies on reserved blocks).
ext4_group_t o_groups_count;
ext4_grpblk_t last;
ext4_grpblk_t add;
- struct buffer_head * bh;
+ struct buffer_head *bh;
handle_t *handle;
int err;
unsigned long freed_blocks;
o_blocks_count + add, add);
/* See if the device is actually as big as what was requested */
- bh = sb_bread(sb, o_blocks_count + add -1);
+ bh = sb_bread(sb, o_blocks_count + add - 1);
if (!bh) {
ext4_warning(sb, __func__,
"can't read last block, resize aborted");
/*
* Mark mballoc pages as not up to date so that they will be updated
* next time they are loaded by ext4_mb_load_buddy.
+ *
+ * XXX Bad, Bad, BAD!!! We should not be overloading the
+ * Uptodate flag, particularly on thte bitmap bh, as way of
+ * hinting to ext4_mb_load_buddy() that it needs to be
+ * overloaded. A user could take a LVM snapshot, then do an
+ * on-line fsck, and clear the uptodate flag, and this would
+ * not be a bug in userspace, but a bug in the kernel. FIXME!!!
*/
- if (test_opt(sb, MBALLOC)) {
+ {
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct inode *inode = sbi->s_buddy_cache;
int blocks_per_page;
projects / mirror_ubuntu-bionic-kernel.git / blobdiff