.args_type = "device:B",
.params = "device|all",
.help = "commit changes to the disk images (if -snapshot is used) or backing files",
- .mhandler.cmd = do_commit,
+ .mhandler.cmd = hmp_commit,
},
STEXI
.args_type = "",
.params = "",
.help = "quit the emulator",
- .user_print = monitor_user_noop,
.mhandler.cmd = hmp_quit,
},
.params = "device",
.help = "remove host block device",
.user_print = monitor_user_noop,
- .mhandler.cmd_new = do_drive_del,
+ .mhandler.cmd_new = hmp_drive_del,
},
STEXI
STEXI
@item change @var{device} @var{setting}
@findex change
-
Change the configuration of a device.
@table @option
.args_type = "filename:F",
.params = "filename",
.help = "save screen into PPM image 'filename'",
- .mhandler.cmd = hmp_screen_dump,
+ .mhandler.cmd = hmp_screendump,
},
STEXI
.args_type = "filename:F",
.params = "filename",
.help = "output logs to 'filename'",
- .mhandler.cmd = do_logfile,
+ .mhandler.cmd = hmp_logfile,
},
STEXI
.args_type = "name:s,option:b",
.params = "name on|off",
.help = "changes status of a specific trace event",
- .mhandler.cmd = do_trace_event_set_state,
+ .mhandler.cmd = hmp_trace_event,
},
STEXI
.args_type = "op:s?,arg:F?",
.params = "on|off|flush|set [arg]",
.help = "open, close, or flush trace file, or set a new file name",
- .mhandler.cmd = do_trace_file,
+ .mhandler.cmd = hmp_trace_file,
},
STEXI
.args_type = "items:s",
.params = "item1[,...]",
.help = "activate logging of the specified items",
- .mhandler.cmd = do_log,
+ .mhandler.cmd = hmp_log,
},
STEXI
.args_type = "name:s?",
.params = "[tag|id]",
.help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created",
- .mhandler.cmd = do_savevm,
+ .mhandler.cmd = hmp_savevm,
},
STEXI
.args_type = "name:s",
.params = "tag|id",
.help = "restore a VM snapshot from its tag or id",
- .mhandler.cmd = do_loadvm,
+ .mhandler.cmd = hmp_loadvm,
.command_completion = loadvm_completion,
},
.args_type = "name:s",
.params = "tag|id",
.help = "delete a VM snapshot from its tag or id",
- .mhandler.cmd = do_delvm,
+ .mhandler.cmd = hmp_delvm,
.command_completion = delvm_completion,
},
.args_type = "option:s?",
.params = "[on|off]",
.help = "run emulation in singlestep mode or switch to normal mode",
- .mhandler.cmd = do_singlestep,
+ .mhandler.cmd = hmp_singlestep,
},
STEXI
.args_type = "device:s?",
.params = "[device]",
.help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'",
- .mhandler.cmd = do_gdbserver,
+ .mhandler.cmd = hmp_gdbserver,
},
STEXI
.args_type = "fmt:/,addr:l",
.params = "/fmt addr",
.help = "virtual memory dump starting at 'addr'",
- .mhandler.cmd = do_memory_dump,
+ .mhandler.cmd = hmp_memory_dump,
},
STEXI
.args_type = "fmt:/,addr:l",
.params = "/fmt addr",
.help = "physical memory dump starting at 'addr'",
- .mhandler.cmd = do_physical_memory_dump,
+ .mhandler.cmd = hmp_physical_memory_dump,
},
STEXI
STEXI
@item p or print/@var{fmt} @var{expr}
@findex print
-
Print expression value. Only the @var{format} part of @var{fmt} is
used.
ETEXI
.args_type = "fmt:/,addr:i,index:i.",
.params = "/fmt addr",
.help = "I/O port read",
- .mhandler.cmd = do_ioport_read,
+ .mhandler.cmd = hmp_ioport_read,
},
STEXI
+@item i/@var{fmt} @var{addr} [.@var{index}]
+@findex i
Read I/O port.
ETEXI
.args_type = "fmt:/,addr:i,val:i",
.params = "/fmt addr value",
.help = "I/O port write",
- .mhandler.cmd = do_ioport_write,
+ .mhandler.cmd = hmp_ioport_write,
},
STEXI
+@item o/@var{fmt} @var{addr} @var{val}
+@findex o
Write to I/O port.
ETEXI
.args_type = "keys:s,hold-time:i?",
.params = "keys [hold_ms]",
.help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)",
- .mhandler.cmd = hmp_send_key,
+ .mhandler.cmd = hmp_sendkey,
.command_completion = sendkey_completion,
},
STEXI
@item sendkey @var{keys}
@findex sendkey
-
Send @var{keys} to the guest. @var{keys} could be the name of the
key or the raw value in hexadecimal format. Use @code{-} to press
several keys simultaneously. Example:
STEXI
@item system_reset
@findex system_reset
-
Reset the system.
ETEXI
STEXI
@item system_powerdown
@findex system_powerdown
-
Power down the system (if supported).
ETEXI
.args_type = "start:i,size:i",
.params = "addr size",
.help = "compute the checksum of a memory region",
- .mhandler.cmd = do_sum,
+ .mhandler.cmd = hmp_sum,
},
STEXI
@item sum @var{addr} @var{size}
@findex sum
-
Compute the checksum of a memory region.
ETEXI
.args_type = "devname:s",
.params = "device",
.help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')",
- .mhandler.cmd = do_usb_add,
+ .mhandler.cmd = hmp_usb_add,
},
STEXI
@item usb_add @var{devname}
@findex usb_add
-
Add the USB device @var{devname}. For details of available devices see
@ref{usb_devices}
ETEXI
.args_type = "devname:s",
.params = "device",
.help = "remove USB device 'bus.addr'",
- .mhandler.cmd = do_usb_del,
+ .mhandler.cmd = hmp_usb_del,
},
STEXI
@item usb_del @var{devname}
@findex usb_del
-
Remove the USB device @var{devname} from the QEMU virtual USB
hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor
command @code{info usb} to see the devices you can remove.
STEXI
@item device_add @var{config}
@findex device_add
-
Add device.
ETEXI
STEXI
@item device_del @var{id}
@findex device_del
-
Remove device @var{id}.
ETEXI
.args_type = "dx_str:s,dy_str:s,dz_str:s?",
.params = "dx dy [dz]",
.help = "send mouse move events",
- .mhandler.cmd = do_mouse_move,
+ .mhandler.cmd = hmp_mouse_move,
},
STEXI
.args_type = "button_state:i",
.params = "state",
.help = "change mouse button state (1=L, 2=M, 4=R)",
- .mhandler.cmd = do_mouse_button,
+ .mhandler.cmd = hmp_mouse_button,
},
STEXI
.args_type = "index:i",
.params = "index",
.help = "set which mouse device receives events",
- .mhandler.cmd = do_mouse_set,
+ .mhandler.cmd = hmp_mouse_set,
},
STEXI
.args_type = "path:F,freq:i?,bits:i?,nchannels:i?",
.params = "path [frequency [bits [channels]]]",
.help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)",
- .mhandler.cmd = do_wav_capture,
+ .mhandler.cmd = hmp_wavcapture,
},
STEXI
@item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]]
.args_type = "n:i",
.params = "capture index",
.help = "stop capture",
- .mhandler.cmd = do_stop_capture,
+ .mhandler.cmd = hmp_stopcapture,
},
STEXI
@item stopcapture @var{index}
.args_type = "bootdevice:s",
.params = "bootdevice",
.help = "define new values for the boot device list",
- .mhandler.cmd = do_boot_set,
+ .mhandler.cmd = hmp_boot_set,
},
STEXI
@item boot_set @var{bootdevicelist}
@findex boot_set
-
Define new values for the boot device list. Those values will override
the values specified on the command line through the @code{-boot} option.
.args_type = "",
.params = "",
.help = "inject an NMI",
- .mhandler.cmd = hmp_inject_nmi,
+ .mhandler.cmd = hmp_nmi,
},
STEXI
@item nmi @var{cpu}
@findex migrate_cancel
Cancel the current VM migration.
+ETEXI
+
+ {
+ .name = "migrate_incoming",
+ .args_type = "uri:s",
+ .params = "uri",
+ .help = "Continue an incoming migration from an -incoming defer",
+ .mhandler.cmd = hmp_migrate_incoming,
+ },
+
+STEXI
+@item migrate_incoming @var{uri}
+@findex migrate_incoming
+Continue an incoming migration using the @var{uri} (that has the same syntax
+as the -incoming option).
+
ETEXI
{
@item migrate_set_capability @var{capability} @var{state}
@findex migrate_set_capability
Enable/Disable the usage of a capability @var{capability} for migration.
+ETEXI
+
+ {
+ .name = "migrate_set_parameter",
+ .args_type = "parameter:s,value:i",
+ .params = "parameter value",
+ .help = "Set the parameter for migration",
+ .mhandler.cmd = hmp_migrate_set_parameter,
+ .command_completion = migrate_set_parameter_completion,
+ },
+
+STEXI
+@item migrate_set_parameter @var{parameter} @var{value}
+@findex migrate_set_parameter
+Set the parameter @var{parameter} for migration.
ETEXI
{
.params = "protocol hostname port tls-port cert-subject",
.help = "send migration info to spice/vnc client",
.user_print = monitor_user_noop,
- .mhandler.cmd_async = client_migrate_info,
- .flags = MONITOR_CMD_ASYNC,
+ .mhandler.cmd_new = client_migrate_info,
},
STEXI
"[,snapshot=on|off][,cache=on|off]\n"
"[,readonly=on|off][,copy-on-read=on|off]",
.help = "add drive to PCI storage controller",
- .mhandler.cmd = drive_hot_add,
+ .mhandler.cmd = hmp_drive_add,
},
STEXI
@item drive_add
@findex drive_add
Add drive to PCI storage controller.
-ETEXI
-
-#if defined(CONFIG_PCI_HOTPLUG_OLD)
- {
- .name = "pci_add",
- .args_type = "pci_addr:s,type:s,opts:s?",
- .params = "auto|[[<domain>:]<bus>:]<slot> nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...",
- .help = "hot-add PCI device",
- .mhandler.cmd = pci_device_hot_add,
- },
-#endif
-
-STEXI
-@item pci_add
-@findex pci_add
-Hot-add PCI device.
-ETEXI
-
-#if defined(CONFIG_PCI_HOTPLUG_OLD)
- {
- .name = "pci_del",
- .args_type = "pci_addr:s",
- .params = "[[<domain>:]<bus>:]<slot>",
- .help = "hot remove PCI device",
- .mhandler.cmd = do_pci_device_hot_remove,
- },
-#endif
-
-STEXI
-@item pci_del
-@findex pci_del
-Hot remove PCI device.
ETEXI
{
"<tlb header> = 32bit x 4\n\t\t\t"
"<tlb header prefix> = 32bit x 4",
.user_print = pcie_aer_inject_error_print,
- .mhandler.cmd_new = do_pcie_aer_inject_error,
+ .mhandler.cmd_new = hmp_pcie_aer_inject_error,
},
STEXI
.args_type = "device:s,opts:s?",
.params = "tap|user|socket|vde|netmap|bridge|vhost-user|dump [options]",
.help = "add host VLAN client",
- .mhandler.cmd = net_host_device_add,
+ .mhandler.cmd = hmp_host_net_add,
.command_completion = host_net_add_completion,
},
.args_type = "vlan_id:i,device:s",
.params = "vlan_id name",
.help = "remove host VLAN client",
- .mhandler.cmd = net_host_device_remove,
+ .mhandler.cmd = hmp_host_net_remove,
.command_completion = host_net_remove_completion,
},
.args_type = "arg1:s,arg2:s?,arg3:s?",
.params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport",
.help = "redirect TCP or UDP connections from host to guest (requires -net user)",
- .mhandler.cmd = net_slirp_hostfwd_add,
+ .mhandler.cmd = hmp_hostfwd_add,
},
#endif
STEXI
.args_type = "arg1:s,arg2:s?,arg3:s?",
.params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport",
.help = "remove host-to-guest TCP or UDP redirection",
- .mhandler.cmd = net_slirp_hostfwd_remove,
+ .mhandler.cmd = hmp_hostfwd_remove,
},
#endif
.args_type = "action:s",
.params = "[reset|shutdown|poweroff|pause|debug|none]",
.help = "change watchdog action",
- .mhandler.cmd = do_watchdog_action,
+ .mhandler.cmd = hmp_watchdog_action,
.command_completion = watchdog_action_completion,
},
.args_type = "aclname:s",
.params = "aclname",
.help = "list rules in the access control list",
- .mhandler.cmd = do_acl_show,
+ .mhandler.cmd = hmp_acl_show,
},
STEXI
.args_type = "aclname:s,policy:s",
.params = "aclname allow|deny",
.help = "set default access control list policy",
- .mhandler.cmd = do_acl_policy,
+ .mhandler.cmd = hmp_acl_policy,
},
STEXI
.args_type = "aclname:s,match:s,policy:s,index:i?",
.params = "aclname match allow|deny [index]",
.help = "add a match rule to the access control list",
- .mhandler.cmd = do_acl_add,
+ .mhandler.cmd = hmp_acl_add,
},
STEXI
.args_type = "aclname:s,match:s",
.params = "aclname match",
.help = "remove a match rule from the access control list",
- .mhandler.cmd = do_acl_remove,
+ .mhandler.cmd = hmp_acl_remove,
},
STEXI
.args_type = "aclname:s",
.params = "aclname",
.help = "reset the access control list",
- .mhandler.cmd = do_acl_reset,
+ .mhandler.cmd = hmp_acl_reset,
},
STEXI
.args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l",
.params = "[-b] cpu bank status mcgstatus addr misc",
.help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]",
- .mhandler.cmd = do_inject_mce,
+ .mhandler.cmd = hmp_mce,
},
#endif
},
STEXI
-@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
-@findex block_set_io_throttle
-Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+@item block_passwd @var{device} @var{password}
+@findex block_passwd
+Set the encrypted device @var{device} password to @var{password}
ETEXI
{
},
STEXI
-@item block_passwd @var{device} @var{password}
-@findex block_passwd
-Set the encrypted device @var{device} password to @var{password}
+@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+@findex block_set_io_throttle
+Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
ETEXI
{
STEXI
@item set_password [ vnc | spice ] password [ action-if-connected ]
@findex set_password
-
Change spice/vnc password. Use zero to make the password stay valid
forever. @var{action-if-connected} specifies what should happen in
case a connection is established: @var{fail} makes the password change
STEXI
@item expire_password [ vnc | spice ] expire-time
@findex expire_password
-
Specify when a password for spice/vnc becomes
invalid. @var{expire-time} accepts:
},
STEXI
-@item chardev_add args
-@findex chardev_add
-
+@item chardev-add args
+@findex chardev-add
chardev_add accepts the same parameters as the -chardev command line switch.
ETEXI
},
STEXI
-@item chardev_remove id
-@findex chardev_remove
-
+@item chardev-remove id
+@findex chardev-remove
Removes the chardev @var{id}.
ETEXI
STEXI
@item qemu-io @var{device} @var{command}
@findex qemu-io
-
Executes a qemu-io command on the given block device.
ETEXI
STEXI
@item cpu-add @var{id}
+@findex cpu-add
Add CPU with id @var{id}
+ETEXI
+
+ {
+ .name = "qom-list",
+ .args_type = "path:s?",
+ .params = "path",
+ .help = "list QOM properties",
+ .mhandler.cmd = hmp_qom_list,
+ },
+
+STEXI
+@item qom-list [@var{path}]
+Print QOM properties of object at location @var{path}
+ETEXI
+
+ {
+ .name = "qom-set",
+ .args_type = "path:s,property:s,value:s",
+ .params = "path property value",
+ .help = "set QOM property",
+ .mhandler.cmd = hmp_qom_set,
+ },
+
+STEXI
+@item qom-set @var{path} @var{property} @var{value}
+Set QOM property @var{property} of object at location @var{path} to value @var{value}
ETEXI
{
.args_type = "item:s?",
.params = "[subcommand]",
.help = "show various information about the system state",
- .mhandler.cmd = do_info_help,
+ .mhandler.cmd = hmp_info_help,
.sub_table = info_cmds,
},
show list of VM snapshots
@item info status
show the current VM status (running|paused)
-@item info pcmcia
-show guest PCMCIA status
@item info mice
show which guest mouse is receiving events
@item info vnc
show migration status
@item info migrate_capabilities
show current migration capabilities
+@item info migrate_parameters
+show current migration parameters
@item info migrate_cache_size
show current migration XBZRLE cache size
@item info balloon
show device tree
@item info qdm
show qdev device model list
+@item info qom-tree
+show object composition tree
@item info roms
show roms
@item info tpm
show the TPM device
+@item info memory-devices
+show the memory devices
@end table
ETEXI
projects / mirror_qemu.git / blobdiff