*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>
+ *
+ * Contributions after 2012-01-13 are licensed under the terms of the
+ * GNU GPL, version 2 or (at your option) any later version.
*/
#include "hw.h"
#include "pc.h"
#include "acpi.h"
#include "sysemu.h"
#include "range.h"
+#include "ioport.h"
+#include "fw_cfg.h"
//#define DEBUG
#define ACPI_DBG_IO_ADDR 0xb044
#define GPE_BASE 0xafe0
-#define PCI_BASE 0xae00
+#define GPE_LEN 4
+#define PCI_UP_BASE 0xae00
+#define PCI_DOWN_BASE 0xae04
#define PCI_EJ_BASE 0xae08
#define PCI_RMV_BASE 0xae0c
#define PIIX4_PCI_HOTPLUG_STATUS 2
-struct gpe_regs {
- uint16_t sts; /* status */
- uint16_t en; /* enabled */
-};
-
struct pci_status {
- uint32_t up;
+ uint32_t up; /* deprecated, maintained for migration compatibility */
uint32_t down;
};
typedef struct PIIX4PMState {
PCIDevice dev;
IORange ioport;
- uint16_t pmsts;
- uint16_t pmen;
- uint16_t pmcntrl;
+ ACPIREGS ar;
APMState apm;
- QEMUTimer *tmr_timer;
- int64_t tmr_overflow_time;
-
PMSMBus smb;
uint32_t smb_io_base;
qemu_irq irq;
- qemu_irq cmos_s3;
qemu_irq smi_irq;
int kvm_enabled;
+ Notifier machine_ready;
/* for pci hotplug */
- struct gpe_regs gpe;
struct pci_status pci0_status;
uint32_t pci0_hotplug_enable;
+ uint32_t pci0_slot_device_present;
+
+ uint8_t disable_s3;
+ uint8_t disable_s4;
+ uint8_t s4_val;
} PIIX4PMState;
static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0
-static uint32_t get_pmtmr(PIIX4PMState *s)
-{
- uint32_t d;
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
- return d & 0xffffff;
-}
-
-static int get_pmsts(PIIX4PMState *s)
-{
- int64_t d;
-
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
- get_ticks_per_sec());
- if (d >= s->tmr_overflow_time)
- s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
- return s->pmsts;
-}
-
static void pm_update_sci(PIIX4PMState *s)
{
int sci_level, pmsts;
- int64_t expire_time;
- pmsts = get_pmsts(s);
- sci_level = (((pmsts & s->pmen) &
+ pmsts = acpi_pm1_evt_get_sts(&s->ar);
+ sci_level = (((pmsts & s->ar.pm1.evt.en) &
(ACPI_BITMASK_RT_CLOCK_ENABLE |
ACPI_BITMASK_POWER_BUTTON_ENABLE |
ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
- (((s->gpe.sts & s->gpe.en) & PIIX4_PCI_HOTPLUG_STATUS) != 0);
+ (((s->ar.gpe.sts[0] & s->ar.gpe.en[0])
+ & PIIX4_PCI_HOTPLUG_STATUS) != 0);
qemu_set_irq(s->irq, sci_level);
/* schedule a timer interruption if needed */
- if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
- !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
- expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
- PM_TIMER_FREQUENCY);
- qemu_mod_timer(s->tmr_timer, expire_time);
- } else {
- qemu_del_timer(s->tmr_timer);
- }
+ acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
+ !(pmsts & ACPI_BITMASK_TIMER_STATUS));
}
-static void pm_tmr_timer(void *opaque)
+static void pm_tmr_timer(ACPIREGS *ar)
{
- PIIX4PMState *s = opaque;
+ PIIX4PMState *s = container_of(ar, PIIX4PMState, ar);
pm_update_sci(s);
}
switch(addr) {
case 0x00:
- {
- int64_t d;
- int pmsts;
- pmsts = get_pmsts(s);
- if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
- /* if TMRSTS is reset, then compute the new overflow time */
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
- get_ticks_per_sec());
- s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
- }
- s->pmsts &= ~val;
- pm_update_sci(s);
- }
+ acpi_pm1_evt_write_sts(&s->ar, val);
+ pm_update_sci(s);
break;
case 0x02:
- s->pmen = val;
+ acpi_pm1_evt_write_en(&s->ar, val);
pm_update_sci(s);
break;
case 0x04:
- {
- int sus_typ;
- s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
- if (val & ACPI_BITMASK_SLEEP_ENABLE) {
- /* change suspend type */
- sus_typ = (val >> 10) & 7;
- switch(sus_typ) {
- case 0: /* soft power off */
- qemu_system_shutdown_request();
- break;
- case 1:
- /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
- Pretend that resume was caused by power button */
- s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
- ACPI_BITMASK_POWER_BUTTON_STATUS);
- qemu_system_reset_request();
- if (s->cmos_s3) {
- qemu_irq_raise(s->cmos_s3);
- }
- default:
- break;
- }
- }
- }
+ acpi_pm1_cnt_write(&s->ar, val, s->s4_val);
break;
default:
break;
}
- PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", addr, val);
+ PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", (unsigned int)addr,
+ (unsigned int)val);
}
static void pm_ioport_read(IORange *ioport, uint64_t addr, unsigned width,
switch(addr) {
case 0x00:
- val = get_pmsts(s);
+ val = acpi_pm1_evt_get_sts(&s->ar);
break;
case 0x02:
- val = s->pmen;
+ val = s->ar.pm1.evt.en;
break;
case 0x04:
- val = s->pmcntrl;
+ val = s->ar.pm1.cnt.cnt;
break;
case 0x08:
- val = get_pmtmr(s);
+ val = acpi_pm_tmr_get(&s->ar);
break;
default:
val = 0;
break;
}
- PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", addr, val);
+ PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", (unsigned int)addr, val);
*data = val;
}
PIIX4PMState *s = arg;
/* ACPI specs 3.0, 4.7.2.5 */
- if (val == ACPI_ENABLE) {
- s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
- } else if (val == ACPI_DISABLE) {
- s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
- }
+ acpi_pm1_cnt_update(&s->ar, val == ACPI_ENABLE, val == ACPI_DISABLE);
if (s->dev.config[0x5b] & (1 << 1)) {
if (s->smi_irq) {
pm_io_space_update((PIIX4PMState *)d);
}
+static void vmstate_pci_status_pre_save(void *opaque)
+{
+ struct pci_status *pci0_status = opaque;
+ PIIX4PMState *s = container_of(pci0_status, PIIX4PMState, pci0_status);
+
+ /* We no longer track up, so build a safe value for migrating
+ * to a version that still does... of course these might get lost
+ * by an old buggy implementation, but we try. */
+ pci0_status->up = s->pci0_slot_device_present & s->pci0_hotplug_enable;
+}
+
static int vmstate_acpi_post_load(void *opaque, int version_id)
{
PIIX4PMState *s = opaque;
return 0;
}
+#define VMSTATE_GPE_ARRAY(_field, _state) \
+ { \
+ .name = (stringify(_field)), \
+ .version_id = 0, \
+ .num = GPE_LEN, \
+ .info = &vmstate_info_uint16, \
+ .size = sizeof(uint16_t), \
+ .flags = VMS_ARRAY | VMS_POINTER, \
+ .offset = vmstate_offset_pointer(_state, _field, uint8_t), \
+ }
+
static const VMStateDescription vmstate_gpe = {
.name = "gpe",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField []) {
- VMSTATE_UINT16(sts, struct gpe_regs),
- VMSTATE_UINT16(en, struct gpe_regs),
+ VMSTATE_GPE_ARRAY(sts, ACPIGPE),
+ VMSTATE_GPE_ARRAY(en, ACPIGPE),
VMSTATE_END_OF_LIST()
}
};
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
+ .pre_save = vmstate_pci_status_pre_save,
.fields = (VMStateField []) {
VMSTATE_UINT32(up, struct pci_status),
VMSTATE_UINT32(down, struct pci_status),
.post_load = vmstate_acpi_post_load,
.fields = (VMStateField []) {
VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
- VMSTATE_UINT16(pmsts, PIIX4PMState),
- VMSTATE_UINT16(pmen, PIIX4PMState),
- VMSTATE_UINT16(pmcntrl, PIIX4PMState),
+ VMSTATE_UINT16(ar.pm1.evt.sts, PIIX4PMState),
+ VMSTATE_UINT16(ar.pm1.evt.en, PIIX4PMState),
+ VMSTATE_UINT16(ar.pm1.cnt.cnt, PIIX4PMState),
VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
- VMSTATE_TIMER(tmr_timer, PIIX4PMState),
- VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
- VMSTATE_STRUCT(gpe, PIIX4PMState, 2, vmstate_gpe, struct gpe_regs),
+ VMSTATE_TIMER(ar.tmr.timer, PIIX4PMState),
+ VMSTATE_INT64(ar.tmr.overflow_time, PIIX4PMState),
+ VMSTATE_STRUCT(ar.gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
struct pci_status),
VMSTATE_END_OF_LIST()
}
};
+static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots)
+{
+ BusChild *kid, *next;
+ BusState *bus = qdev_get_parent_bus(&s->dev.qdev);
+ int slot = ffs(slots) - 1;
+ bool slot_free = true;
+
+ /* Mark request as complete */
+ s->pci0_status.down &= ~(1U << slot);
+
+ QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {
+ DeviceState *qdev = kid->child;
+ PCIDevice *dev = PCI_DEVICE(qdev);
+ PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
+ if (PCI_SLOT(dev->devfn) == slot) {
+ if (pc->no_hotplug) {
+ slot_free = false;
+ } else {
+ qdev_free(qdev);
+ }
+ }
+ }
+ if (slot_free) {
+ s->pci0_slot_device_present &= ~(1U << slot);
+ }
+}
+
static void piix4_update_hotplug(PIIX4PMState *s)
{
PCIDevice *dev = &s->dev;
BusState *bus = qdev_get_parent_bus(&dev->qdev);
- DeviceState *qdev, *next;
+ BusChild *kid, *next;
+
+ /* Execute any pending removes during reset */
+ while (s->pci0_status.down) {
+ acpi_piix_eject_slot(s, s->pci0_status.down);
+ }
s->pci0_hotplug_enable = ~0;
+ s->pci0_slot_device_present = 0;
- QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
- PCIDeviceInfo *info = container_of(qdev->info, PCIDeviceInfo, qdev);
- PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, qdev);
+ QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {
+ DeviceState *qdev = kid->child;
+ PCIDevice *pdev = PCI_DEVICE(qdev);
+ PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pdev);
int slot = PCI_SLOT(pdev->devfn);
- if (info->no_hotplug) {
- s->pci0_hotplug_enable &= ~(1 << slot);
+ if (pc->no_hotplug) {
+ s->pci0_hotplug_enable &= ~(1U << slot);
}
+
+ s->pci0_slot_device_present |= (1U << slot);
}
}
pci_conf[0x5a] = 0;
pci_conf[0x5b] = 0;
+ pci_conf[0x40] = 0x01; /* PM io base read only bit */
+ pci_conf[0x80] = 0;
+
if (s->kvm_enabled) {
/* Mark SMM as already inited (until KVM supports SMM). */
pci_conf[0x5B] = 0x02;
{
PIIX4PMState *s = opaque;
- if (!s) {
- qemu_system_shutdown_request();
- } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
- s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
- pm_update_sci(s);
- }
+ assert(s != NULL);
+ acpi_pm1_evt_power_down(&s->ar);
+}
+
+static void piix4_pm_machine_ready(Notifier *n, void *opaque)
+{
+ PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready);
+ uint8_t *pci_conf;
+
+ pci_conf = s->dev.config;
+ pci_conf[0x5f] = (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10;
+ pci_conf[0x63] = 0x60;
+ pci_conf[0x67] = (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) |
+ (isa_is_ioport_assigned(0x2f8) ? 0x90 : 0);
+
}
static int piix4_pm_initfn(PCIDevice *dev)
uint8_t *pci_conf;
pci_conf = s->dev.config;
- pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
pci_conf[0x06] = 0x80;
pci_conf[0x07] = 0x02;
- pci_conf[0x08] = 0x03; // revision number
pci_conf[0x09] = 0x00;
- pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
pci_conf[0x3d] = 0x01; // interrupt pin 1
- pci_conf[0x40] = 0x01; /* PM io base read only bit */
-
/* APM */
apm_init(&s->apm, apm_ctrl_changed, s);
/* XXX: which specification is used ? The i82731AB has different
mappings */
- pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
- pci_conf[0x63] = 0x60;
- pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
- (serial_hds[1] != NULL ? 0x90 : 0);
-
pci_conf[0x90] = s->smb_io_base | 1;
pci_conf[0x91] = s->smb_io_base >> 8;
pci_conf[0xd2] = 0x09;
register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
- s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
+ acpi_pm_tmr_init(&s->ar, pm_tmr_timer);
+ acpi_gpe_init(&s->ar, GPE_LEN);
qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
pm_smbus_init(&s->dev.qdev, &s->smb);
+ s->machine_ready.notify = piix4_pm_machine_ready;
+ qemu_add_machine_init_done_notifier(&s->machine_ready);
qemu_register_reset(piix4_reset, s);
piix4_acpi_system_hot_add_init(dev->bus, s);
}
i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
- qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
- int kvm_enabled)
+ qemu_irq sci_irq, qemu_irq smi_irq,
+ int kvm_enabled, void *fw_cfg)
{
PCIDevice *dev;
PIIX4PMState *s;
s = DO_UPCAST(PIIX4PMState, dev, dev);
s->irq = sci_irq;
- s->cmos_s3 = cmos_s3;
+ acpi_pm1_cnt_init(&s->ar);
s->smi_irq = smi_irq;
s->kvm_enabled = kvm_enabled;
qdev_init_nofail(&dev->qdev);
- return s->smb.smbus;
-}
+ if (fw_cfg) {
+ uint8_t suspend[6] = {128, 0, 0, 129, 128, 128};
+ suspend[3] = 1 | ((!s->disable_s3) << 7);
+ suspend[4] = s->s4_val | ((!s->disable_s4) << 7);
-static PCIDeviceInfo piix4_pm_info = {
- .qdev.name = "PIIX4_PM",
- .qdev.desc = "PM",
- .qdev.size = sizeof(PIIX4PMState),
- .qdev.vmsd = &vmstate_acpi,
- .qdev.no_user = 1,
- .no_hotplug = 1,
- .init = piix4_pm_initfn,
- .config_write = pm_write_config,
- .qdev.props = (Property[]) {
- DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
- DEFINE_PROP_END_OF_LIST(),
+ fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6);
}
-};
-static void piix4_pm_register(void)
-{
- pci_qdev_register(&piix4_pm_info);
+ return s->smb.smbus;
}
-device_init(piix4_pm_register);
+static Property piix4_pm_properties[] = {
+ DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
+ DEFINE_PROP_UINT8("disable_s3", PIIX4PMState, disable_s3, 0),
+ DEFINE_PROP_UINT8("disable_s4", PIIX4PMState, disable_s4, 0),
+ DEFINE_PROP_UINT8("s4_val", PIIX4PMState, s4_val, 2),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void piix4_pm_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->no_hotplug = 1;
+ k->init = piix4_pm_initfn;
+ k->config_write = pm_write_config;
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
+ k->revision = 0x03;
+ k->class_id = PCI_CLASS_BRIDGE_OTHER;
+ dc->desc = "PM";
+ dc->no_user = 1;
+ dc->vmsd = &vmstate_acpi;
+ dc->props = piix4_pm_properties;
+}
+
+static TypeInfo piix4_pm_info = {
+ .name = "PIIX4_PM",
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(PIIX4PMState),
+ .class_init = piix4_pm_class_init,
+};
-static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
+static void piix4_pm_register_types(void)
{
- if (addr & 1)
- return (val >> 8) & 0xff;
- return val & 0xff;
+ type_register_static(&piix4_pm_info);
}
+type_init(piix4_pm_register_types)
+
static uint32_t gpe_readb(void *opaque, uint32_t addr)
{
- uint32_t val = 0;
PIIX4PMState *s = opaque;
- struct gpe_regs *g = &s->gpe;
-
- switch (addr) {
- case GPE_BASE:
- case GPE_BASE + 1:
- val = gpe_read_val(g->sts, addr);
- break;
- case GPE_BASE + 2:
- case GPE_BASE + 3:
- val = gpe_read_val(g->en, addr);
- break;
- default:
- break;
- }
+ uint32_t val = acpi_gpe_ioport_readb(&s->ar, addr);
PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
return val;
}
-static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
-{
- if (addr & 1)
- *cur = (*cur & 0xff) | (val << 8);
- else
- *cur = (*cur & 0xff00) | (val & 0xff);
-}
-
-static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
-{
- uint16_t x1, x0 = val & 0xff;
- int shift = (addr & 1) ? 8 : 0;
-
- x1 = (*cur >> shift) & 0xff;
-
- x1 = x1 & ~x0;
-
- *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
-}
-
static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4PMState *s = opaque;
- struct gpe_regs *g = &s->gpe;
-
- switch (addr) {
- case GPE_BASE:
- case GPE_BASE + 1:
- gpe_reset_val(&g->sts, addr, val);
- break;
- case GPE_BASE + 2:
- case GPE_BASE + 3:
- gpe_write_val(&g->en, addr, val);
- break;
- default:
- break;
- }
+ acpi_gpe_ioport_writeb(&s->ar, addr, val);
pm_update_sci(s);
PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
}
-static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
+static uint32_t pci_up_read(void *opaque, uint32_t addr)
{
- uint32_t val = 0;
- struct pci_status *g = opaque;
- switch (addr) {
- case PCI_BASE:
- val = g->up;
- break;
- case PCI_BASE + 4:
- val = g->down;
- break;
- default:
- break;
- }
+ PIIX4PMState *s = opaque;
+ uint32_t val;
- PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
+ /* Manufacture an "up" value to cause a device check on any hotplug
+ * slot with a device. Extra device checks are harmless. */
+ val = s->pci0_slot_device_present & s->pci0_hotplug_enable;
+
+ PIIX4_DPRINTF("pci_up_read %x\n", val);
return val;
}
-static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
+static uint32_t pci_down_read(void *opaque, uint32_t addr)
{
- struct pci_status *g = opaque;
- switch (addr) {
- case PCI_BASE:
- g->up = val;
- break;
- case PCI_BASE + 4:
- g->down = val;
- break;
- }
-
- PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
+ PIIX4PMState *s = opaque;
+ uint32_t val = s->pci0_status.down;
+
+ PIIX4_DPRINTF("pci_down_read %x\n", val);
+ return val;
}
-static uint32_t pciej_read(void *opaque, uint32_t addr)
+static uint32_t pci_features_read(void *opaque, uint32_t addr)
{
- PIIX4_DPRINTF("pciej read %x\n", addr);
+ /* No feature defined yet */
+ PIIX4_DPRINTF("pci_features_read %x\n", 0);
return 0;
}
static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
{
- BusState *bus = opaque;
- DeviceState *qdev, *next;
- PCIDevice *dev;
- int slot = ffs(val) - 1;
-
- QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
- dev = DO_UPCAST(PCIDevice, qdev, qdev);
- if (PCI_SLOT(dev->devfn) == slot) {
- qdev_free(qdev);
- }
- }
-
+ acpi_piix_eject_slot(opaque, val);
PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
}
return s->pci0_hotplug_enable;
}
-static void pcirmv_write(void *opaque, uint32_t addr, uint32_t val)
-{
- return;
-}
-
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
PCIHotplugState state);
static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
{
- struct pci_status *pci0_status = &s->pci0_status;
- register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, s);
- register_ioport_read(GPE_BASE, 4, 1, gpe_readb, s);
+ register_ioport_write(GPE_BASE, GPE_LEN, 1, gpe_writeb, s);
+ register_ioport_read(GPE_BASE, GPE_LEN, 1, gpe_readb, s);
+ acpi_gpe_blk(&s->ar, GPE_BASE);
- register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
- register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
+ register_ioport_read(PCI_UP_BASE, 4, 4, pci_up_read, s);
+ register_ioport_read(PCI_DOWN_BASE, 4, 4, pci_down_read, s);
- register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
- register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
+ register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, s);
+ register_ioport_read(PCI_EJ_BASE, 4, 4, pci_features_read, s);
- register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s);
pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
static void enable_device(PIIX4PMState *s, int slot)
{
- s->gpe.sts |= PIIX4_PCI_HOTPLUG_STATUS;
- s->pci0_status.up |= (1 << slot);
+ s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
+ s->pci0_slot_device_present |= (1U << slot);
}
static void disable_device(PIIX4PMState *s, int slot)
{
- s->gpe.sts |= PIIX4_PCI_HOTPLUG_STATUS;
- s->pci0_status.down |= (1 << slot);
+ s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
+ s->pci0_status.down |= (1U << slot);
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
{
int slot = PCI_SLOT(dev->devfn);
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
- DO_UPCAST(PCIDevice, qdev, qdev));
+ PCI_DEVICE(qdev));
/* Don't send event when device is enabled during qemu machine creation:
* it is present on boot, no hotplug event is necessary. We do send an
* event when the device is disabled later. */
if (state == PCI_COLDPLUG_ENABLED) {
+ s->pci0_slot_device_present |= (1U << slot);
return 0;
}
- s->pci0_status.up = 0;
- s->pci0_status.down = 0;
if (state == PCI_HOTPLUG_ENABLED) {
enable_device(s, slot);
} else {
projects / mirror_qemu.git / blobdiff