]> git.proxmox.com Git - mirror_qemu.git/blobdiff - hw/acpi_piix4.c
Merge remote-tracking branch 'aneesh/for-upstream' into staging
[mirror_qemu.git] / hw / acpi_piix4.c
index 5b16d2039c956af22feca7db45583ac7987a3ed7..dbddde13ab80a97ccbc91af02f21f4fac332f152 100644 (file)
@@ -27,6 +27,7 @@
 #include "sysemu.h"
 #include "range.h"
 #include "ioport.h"
+#include "fw_cfg.h"
 
 //#define DEBUG
 
 
 #define GPE_BASE 0xafe0
 #define GPE_LEN 4
-#define PCI_BASE 0xae00
+#define PCI_UP_BASE 0xae00
+#define PCI_DOWN_BASE 0xae04
 #define PCI_EJ_BASE 0xae08
 #define PCI_RMV_BASE 0xae0c
 
 #define PIIX4_PCI_HOTPLUG_STATUS 2
 
 struct pci_status {
-    uint32_t up;
+    uint32_t up; /* deprecated, maintained for migration compatibility */
     uint32_t down;
 };
 
@@ -65,10 +67,16 @@ typedef struct PIIX4PMState {
     qemu_irq smi_irq;
     int kvm_enabled;
     Notifier machine_ready;
+    Notifier powerdown_notifier;
 
     /* for pci hotplug */
     struct pci_status pci0_status;
     uint32_t pci0_hotplug_enable;
+    uint32_t pci0_slot_device_present;
+
+    uint8_t disable_s3;
+    uint8_t disable_s4;
+    uint8_t s4_val;
 } PIIX4PMState;
 
 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
@@ -117,11 +125,11 @@ static void pm_ioport_write(IORange *ioport, uint64_t addr, unsigned width,
         pm_update_sci(s);
         break;
     case 0x02:
-        s->ar.pm1.evt.en = val;
+        acpi_pm1_evt_write_en(&s->ar, val);
         pm_update_sci(s);
         break;
     case 0x04:
-        acpi_pm1_cnt_write(&s->ar, val);
+        acpi_pm1_cnt_write(&s->ar, val, s->s4_val);
         break;
     default:
         break;
@@ -204,6 +212,17 @@ static void pm_write_config(PCIDevice *d,
         pm_io_space_update((PIIX4PMState *)d);
 }
 
+static void vmstate_pci_status_pre_save(void *opaque)
+{
+    struct pci_status *pci0_status = opaque;
+    PIIX4PMState *s = container_of(pci0_status, PIIX4PMState, pci0_status);
+
+    /* We no longer track up, so build a safe value for migrating
+     * to a version that still does... of course these might get lost
+     * by an old buggy implementation, but we try. */
+    pci0_status->up = s->pci0_slot_device_present & s->pci0_hotplug_enable;
+}
+
 static int vmstate_acpi_post_load(void *opaque, int version_id)
 {
     PIIX4PMState *s = opaque;
@@ -216,10 +235,9 @@ static int vmstate_acpi_post_load(void *opaque, int version_id)
  {                                                                   \
      .name       = (stringify(_field)),                              \
      .version_id = 0,                                                \
-     .num        = GPE_LEN,                                          \
      .info       = &vmstate_info_uint16,                             \
      .size       = sizeof(uint16_t),                                 \
-     .flags      = VMS_ARRAY | VMS_POINTER,                          \
+     .flags      = VMS_SINGLE | VMS_POINTER,                         \
      .offset     = vmstate_offset_pointer(_state, _field, uint8_t),  \
  }
 
@@ -240,6 +258,7 @@ static const VMStateDescription vmstate_pci_status = {
     .version_id = 1,
     .minimum_version_id = 1,
     .minimum_version_id_old = 1,
+    .pre_save = vmstate_pci_status_pre_save,
     .fields      = (VMStateField []) {
         VMSTATE_UINT32(up, struct pci_status),
         VMSTATE_UINT32(down, struct pci_status),
@@ -247,11 +266,54 @@ static const VMStateDescription vmstate_pci_status = {
     }
 };
 
+static int acpi_load_old(QEMUFile *f, void *opaque, int version_id)
+{
+    PIIX4PMState *s = opaque;
+    int ret, i;
+    uint16_t temp;
+
+    ret = pci_device_load(&s->dev, f);
+    if (ret < 0) {
+        return ret;
+    }
+    qemu_get_be16s(f, &s->ar.pm1.evt.sts);
+    qemu_get_be16s(f, &s->ar.pm1.evt.en);
+    qemu_get_be16s(f, &s->ar.pm1.cnt.cnt);
+
+    ret = vmstate_load_state(f, &vmstate_apm, opaque, 1);
+    if (ret) {
+        return ret;
+    }
+
+    qemu_get_timer(f, s->ar.tmr.timer);
+    qemu_get_sbe64s(f, &s->ar.tmr.overflow_time);
+
+    qemu_get_be16s(f, (uint16_t *)s->ar.gpe.sts);
+    for (i = 0; i < 3; i++) {
+        qemu_get_be16s(f, &temp);
+    }
+
+    qemu_get_be16s(f, (uint16_t *)s->ar.gpe.en);
+    for (i = 0; i < 3; i++) {
+        qemu_get_be16s(f, &temp);
+    }
+
+    ret = vmstate_load_state(f, &vmstate_pci_status, opaque, 1);
+    return ret;
+}
+
+/* qemu-kvm 1.2 uses version 3 but advertised as 2
+ * To support incoming qemu-kvm 1.2 migration, change version_id
+ * and minimum_version_id to 2 below (which breaks migration from
+ * qemu 1.2).
+ *
+ */
 static const VMStateDescription vmstate_acpi = {
     .name = "piix4_pm",
-    .version_id = 2,
-    .minimum_version_id = 1,
+    .version_id = 3,
+    .minimum_version_id = 3,
     .minimum_version_id_old = 1,
+    .load_state_old = acpi_load_old,
     .post_load = vmstate_acpi_post_load,
     .fields      = (VMStateField []) {
         VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
@@ -268,22 +330,58 @@ static const VMStateDescription vmstate_acpi = {
     }
 };
 
+static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots)
+{
+    BusChild *kid, *next;
+    BusState *bus = qdev_get_parent_bus(&s->dev.qdev);
+    int slot = ffs(slots) - 1;
+    bool slot_free = true;
+
+    /* Mark request as complete */
+    s->pci0_status.down &= ~(1U << slot);
+
+    QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {
+        DeviceState *qdev = kid->child;
+        PCIDevice *dev = PCI_DEVICE(qdev);
+        PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
+        if (PCI_SLOT(dev->devfn) == slot) {
+            if (pc->no_hotplug) {
+                slot_free = false;
+            } else {
+                qdev_free(qdev);
+            }
+        }
+    }
+    if (slot_free) {
+        s->pci0_slot_device_present &= ~(1U << slot);
+    }
+}
+
 static void piix4_update_hotplug(PIIX4PMState *s)
 {
     PCIDevice *dev = &s->dev;
     BusState *bus = qdev_get_parent_bus(&dev->qdev);
-    DeviceState *qdev, *next;
+    BusChild *kid, *next;
+
+    /* Execute any pending removes during reset */
+    while (s->pci0_status.down) {
+        acpi_piix_eject_slot(s, s->pci0_status.down);
+    }
 
     s->pci0_hotplug_enable = ~0;
+    s->pci0_slot_device_present = 0;
 
-    QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
+    QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {
+        DeviceState *qdev = kid->child;
         PCIDevice *pdev = PCI_DEVICE(qdev);
         PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pdev);
         int slot = PCI_SLOT(pdev->devfn);
 
         if (pc->no_hotplug) {
-            s->pci0_hotplug_enable &= ~(1 << slot);
+            s->pci0_hotplug_enable &= ~(1U << slot);
         }
+
+        s->pci0_slot_device_present |= (1U << slot);
     }
 }
 
@@ -297,6 +395,9 @@ static void piix4_reset(void *opaque)
     pci_conf[0x5a] = 0;
     pci_conf[0x5b] = 0;
 
+    pci_conf[0x40] = 0x01; /* PM io base read only bit */
+    pci_conf[0x80] = 0;
+
     if (s->kvm_enabled) {
         /* Mark SMM as already inited (until KVM supports SMM). */
         pci_conf[0x5B] = 0x02;
@@ -304,9 +405,9 @@ static void piix4_reset(void *opaque)
     piix4_update_hotplug(s);
 }
 
-static void piix4_powerdown(void *opaque, int irq, int power_failing)
+static void piix4_pm_powerdown_req(Notifier *n, void *opaque)
 {
-    PIIX4PMState *s = opaque;
+    PIIX4PMState *s = container_of(n, PIIX4PMState, powerdown_notifier);
 
     assert(s != NULL);
     acpi_pm1_evt_power_down(&s->ar);
@@ -336,10 +437,8 @@ static int piix4_pm_initfn(PCIDevice *dev)
     pci_conf[0x09] = 0x00;
     pci_conf[0x3d] = 0x01; // interrupt pin 1
 
-    pci_conf[0x40] = 0x01; /* PM io base read only bit */
-
     /* APM */
-    apm_init(&s->apm, apm_ctrl_changed, s);
+    apm_init(dev, &s->apm, apm_ctrl_changed, s);
 
     register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
 
@@ -360,7 +459,8 @@ static int piix4_pm_initfn(PCIDevice *dev)
     acpi_pm_tmr_init(&s->ar, pm_tmr_timer);
     acpi_gpe_init(&s->ar, GPE_LEN);
 
-    qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
+    s->powerdown_notifier.notify = piix4_pm_powerdown_req;
+    qemu_register_powerdown_notifier(&s->powerdown_notifier);
 
     pm_smbus_init(&s->dev.qdev, &s->smb);
     s->machine_ready.notify = piix4_pm_machine_ready;
@@ -372,8 +472,8 @@ static int piix4_pm_initfn(PCIDevice *dev)
 }
 
 i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
-                       qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
-                       int kvm_enabled)
+                       qemu_irq sci_irq, qemu_irq smi_irq,
+                       int kvm_enabled, void *fw_cfg)
 {
     PCIDevice *dev;
     PIIX4PMState *s;
@@ -383,17 +483,28 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
 
     s = DO_UPCAST(PIIX4PMState, dev, dev);
     s->irq = sci_irq;
-    acpi_pm1_cnt_init(&s->ar, cmos_s3);
+    acpi_pm1_cnt_init(&s->ar);
     s->smi_irq = smi_irq;
     s->kvm_enabled = kvm_enabled;
 
     qdev_init_nofail(&dev->qdev);
 
+    if (fw_cfg) {
+        uint8_t suspend[6] = {128, 0, 0, 129, 128, 128};
+        suspend[3] = 1 | ((!s->disable_s3) << 7);
+        suspend[4] = s->s4_val | ((!s->disable_s4) << 7);
+
+        fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6);
+    }
+
     return s->smb.smbus;
 }
 
 static Property piix4_pm_properties[] = {
     DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
+    DEFINE_PROP_UINT8("disable_s3", PIIX4PMState, disable_s3, 0),
+    DEFINE_PROP_UINT8("disable_s4", PIIX4PMState, disable_s4, 0),
+    DEFINE_PROP_UINT8("s4_val", PIIX4PMState, s4_val, 2),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -448,60 +559,38 @@ static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
     PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
 }
 
-static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
+static uint32_t pci_up_read(void *opaque, uint32_t addr)
 {
-    uint32_t val = 0;
-    struct pci_status *g = opaque;
-    switch (addr) {
-        case PCI_BASE:
-            val = g->up;
-            break;
-        case PCI_BASE + 4:
-            val = g->down;
-            break;
-        default:
-            break;
-    }
+    PIIX4PMState *s = opaque;
+    uint32_t val;
+
+    /* Manufacture an "up" value to cause a device check on any hotplug
+     * slot with a device.  Extra device checks are harmless. */
+    val = s->pci0_slot_device_present & s->pci0_hotplug_enable;
 
-    PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
+    PIIX4_DPRINTF("pci_up_read %x\n", val);
     return val;
 }
 
-static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
+static uint32_t pci_down_read(void *opaque, uint32_t addr)
 {
-    struct pci_status *g = opaque;
-    switch (addr) {
-        case PCI_BASE:
-            g->up = val;
-            break;
-        case PCI_BASE + 4:
-            g->down = val;
-            break;
-   }
-
-    PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
+    PIIX4PMState *s = opaque;
+    uint32_t val = s->pci0_status.down;
+
+    PIIX4_DPRINTF("pci_down_read %x\n", val);
+    return val;
 }
 
-static uint32_t pciej_read(void *opaque, uint32_t addr)
+static uint32_t pci_features_read(void *opaque, uint32_t addr)
 {
-    PIIX4_DPRINTF("pciej read %x\n", addr);
+    /* No feature defined yet */
+    PIIX4_DPRINTF("pci_features_read %x\n", 0);
     return 0;
 }
 
 static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
 {
-    BusState *bus = opaque;
-    DeviceState *qdev, *next;
-    int slot = ffs(val) - 1;
-
-    QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
-        PCIDevice *dev = PCI_DEVICE(qdev);
-        PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
-        if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) {
-            qdev_free(qdev);
-        }
-    }
-
+    acpi_piix_eject_slot(opaque, val);
 
     PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
 }
@@ -513,29 +602,22 @@ static uint32_t pcirmv_read(void *opaque, uint32_t addr)
     return s->pci0_hotplug_enable;
 }
 
-static void pcirmv_write(void *opaque, uint32_t addr, uint32_t val)
-{
-    return;
-}
-
 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
                                 PCIHotplugState state);
 
 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
 {
-    struct pci_status *pci0_status = &s->pci0_status;
 
     register_ioport_write(GPE_BASE, GPE_LEN, 1, gpe_writeb, s);
     register_ioport_read(GPE_BASE, GPE_LEN, 1,  gpe_readb, s);
     acpi_gpe_blk(&s->ar, GPE_BASE);
 
-    register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
-    register_ioport_read(PCI_BASE, 8, 4,  pcihotplug_read, pci0_status);
+    register_ioport_read(PCI_UP_BASE, 4, 4, pci_up_read, s);
+    register_ioport_read(PCI_DOWN_BASE, 4, 4, pci_down_read, s);
 
-    register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
-    register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, bus);
+    register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, s);
+    register_ioport_read(PCI_EJ_BASE, 4, 4,  pci_features_read, s);
 
-    register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
     register_ioport_read(PCI_RMV_BASE, 4, 4,  pcirmv_read, s);
 
     pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
@@ -544,13 +626,13 @@ static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
 static void enable_device(PIIX4PMState *s, int slot)
 {
     s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
-    s->pci0_status.up |= (1 << slot);
+    s->pci0_slot_device_present |= (1U << slot);
 }
 
 static void disable_device(PIIX4PMState *s, int slot)
 {
     s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
-    s->pci0_status.down |= (1 << slot);
+    s->pci0_status.down |= (1U << slot);
 }
 
 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
@@ -564,11 +646,10 @@ static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
      * it is present on boot, no hotplug event is necessary. We do send an
      * event when the device is disabled later. */
     if (state == PCI_COLDPLUG_ENABLED) {
+        s->pci0_slot_device_present |= (1U << slot);
         return 0;
     }
 
-    s->pci0_status.up = 0;
-    s->pci0_status.down = 0;
     if (state == PCI_HOTPLUG_ENABLED) {
         enable_device(s, slot);
     } else {