* that we need to emulate as well.
*/
-#include "hw/hw.h"
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "cpu.h"
#include "elf.h"
#include "hw/loader.h"
-#include "hw/boards.h"
#include "alpha_sys.h"
+#include "qemu/error-report.h"
#include "sysemu/sysemu.h"
-#include "hw/timer/mc146818rtc.h"
+#include "hw/rtc/mc146818rtc.h"
#include "hw/ide.h"
#include "hw/timer/i8254.h"
-#include "hw/char/serial.h"
+#include "hw/isa/superio.h"
+#include "hw/dma/i8257.h"
+#include "net/net.h"
+#include "qemu/cutils.h"
#define MAX_IDE_BUS 2
static void clipper_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
- const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
char *palcode_filename;
uint64_t palcode_entry, palcode_low, palcode_high;
uint64_t kernel_entry, kernel_low, kernel_high;
+ unsigned int smp_cpus = machine->smp.cpus;
/* Create up to 4 cpus. */
memset(cpus, 0, sizeof(cpus));
for (i = 0; i < smp_cpus; ++i) {
- cpus[i] = cpu_alpha_init(cpu_model ? cpu_model : "ev67");
+ cpus[i] = ALPHA_CPU(cpu_create(machine->cpu_type));
}
cpus[0]->env.trap_arg0 = ram_size;
clipper_pci_map_irq);
/* Since we have an SRM-compatible PALcode, use the SRM epoch. */
- rtc_init(isa_bus, 1900, rtc_irq);
+ mc146818_rtc_init(isa_bus, 1900, rtc_irq);
- pit_init(isa_bus, 0x40, 0, NULL);
- isa_create_simple(isa_bus, "i8042");
+ i8254_pit_init(isa_bus, 0x40, 0, NULL);
/* VGA setup. Don't bother loading the bios. */
pci_vga_init(pci_bus);
- /* Serial code setup. */
- serial_hds_isa_init(isa_bus, MAX_SERIAL_PORTS);
-
/* Network setup. e1000 is good enough, failing Tulip support. */
for (i = 0; i < nb_nics; i++) {
pci_nic_init_nofail(&nd_table[i], pci_bus, "e1000", NULL);
}
+ /* 2 82C37 (dma) */
+ isa_create_simple(isa_bus, "i82374");
+
+ /* Super I/O */
+ isa_create_simple(isa_bus, TYPE_SMC37C669_SUPERIO);
+
/* IDE disk setup. */
{
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS,
bios_name ? bios_name : "palcode-clipper");
if (palcode_filename == NULL) {
- hw_error("no palcode provided\n");
+ error_report("no palcode provided");
exit(1);
}
- size = load_elf(palcode_filename, cpu_alpha_superpage_to_phys,
+ size = load_elf(palcode_filename, NULL, cpu_alpha_superpage_to_phys,
NULL, &palcode_entry, &palcode_low, &palcode_high,
- 0, EM_ALPHA, 0);
+ 0, EM_ALPHA, 0, 0);
if (size < 0) {
- hw_error("could not load palcode '%s'\n", palcode_filename);
+ error_report("could not load palcode '%s'", palcode_filename);
exit(1);
}
g_free(palcode_filename);
/* Start all cpus at the PALcode RESET entry point. */
for (i = 0; i < smp_cpus; ++i) {
- cpus[i]->env.pal_mode = 1;
cpus[i]->env.pc = palcode_entry;
cpus[i]->env.palbr = palcode_entry;
}
if (kernel_filename) {
uint64_t param_offset;
- size = load_elf(kernel_filename, cpu_alpha_superpage_to_phys,
+ size = load_elf(kernel_filename, NULL, cpu_alpha_superpage_to_phys,
NULL, &kernel_entry, &kernel_low, &kernel_high,
- 0, EM_ALPHA, 0);
+ 0, EM_ALPHA, 0, 0);
if (size < 0) {
- hw_error("could not load kernel '%s'\n", kernel_filename);
+ error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
}
if (initrd_filename) {
- long initrd_base, initrd_size;
+ long initrd_base;
+ int64_t initrd_size;
initrd_size = get_image_size(initrd_filename);
if (initrd_size < 0) {
- hw_error("could not load initial ram disk '%s'\n",
- initrd_filename);
+ error_report("could not load initial ram disk '%s'",
+ initrd_filename);
exit(1);
}
}
}
-static QEMUMachine clipper_machine = {
- .name = "clipper",
- .desc = "Alpha DP264/CLIPPER",
- .init = clipper_init,
- .max_cpus = 4,
- .is_default = 1,
-};
-
-static void clipper_machine_init(void)
+static void clipper_machine_init(MachineClass *mc)
{
- qemu_register_machine(&clipper_machine);
+ mc->desc = "Alpha DP264/CLIPPER";
+ mc->init = clipper_init;
+ mc->block_default_type = IF_IDE;
+ mc->max_cpus = 4;
+ mc->is_default = 1;
+ mc->default_cpu_type = ALPHA_CPU_TYPE_NAME("ev67");
}
-machine_init(clipper_machine_init);
+DEFINE_MACHINE("clipper", clipper_machine_init)