]> git.proxmox.com Git - mirror_qemu.git/blobdiff - hw/apb_pci.c
msix: remove duplicated defines.
[mirror_qemu.git] / hw / apb_pci.c
index 086908a846e1f9a9333bd4ec2910bde0a821dbf0..b53e3c3bf9b817ee46e5a9da08b27cd2f5d032c8 100644 (file)
    Ultrasparc PCI host is called the PCI Bus Module (PBM).  The APB is
    the secondary PCI bridge.  */
 
-#include "hw.h"
+#include "sysbus.h"
 #include "pci.h"
+#include "pci_host.h"
+#include "rwhandler.h"
+#include "apb_pci.h"
 
 /* debug APB */
 //#define DEBUG_APB
 
 #ifdef DEBUG_APB
-#define APB_DPRINTF(fmt, args...) \
-do { printf("APB: " fmt , ##args); } while (0)
+#define APB_DPRINTF(fmt, ...) \
+do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
 #else
-#define APB_DPRINTF(fmt, args...)
+#define APB_DPRINTF(fmt, ...)
 #endif
 
-typedef target_phys_addr_t pci_addr_t;
-#include "pci_host.h"
-
-typedef PCIHostState APBState;
-
-static void pci_apb_config_writel (void *opaque, target_phys_addr_t addr,
-                                         uint32_t val)
-{
-    APBState *s = opaque;
+/*
+ * Chipset docs:
+ * PBM: "UltraSPARC IIi User's Manual",
+ * http://www.sun.com/processors/manuals/805-0087.pdf
+ *
+ * APB: "Advanced PCI Bridge (APB) User's Manual",
+ * http://www.sun.com/processors/manuals/805-1251.pdf
+ */
 
-#ifdef TARGET_WORDS_BIGENDIAN
-    val = bswap32(val);
-#endif
-    APB_DPRINTF("config_writel addr " TARGET_FMT_plx " val %x\n", addr,
-                val);
-    s->config_reg = val;
-}
+#define PBM_PCI_IMR_MASK    0x7fffffff
+#define PBM_PCI_IMR_ENABLED 0x80000000
+
+#define POR          (1 << 31)
+#define SOFT_POR     (1 << 30)
+#define SOFT_XIR     (1 << 29)
+#define BTN_POR      (1 << 28)
+#define BTN_XIR      (1 << 27)
+#define RESET_MASK   0xf8000000
+#define RESET_WCMASK 0x98000000
+#define RESET_WMASK  0x60000000
+
+typedef struct APBState {
+    SysBusDevice busdev;
+    PCIBus      *bus;
+    ReadWriteHandler pci_config_handler;
+    uint32_t iommu[4];
+    uint32_t pci_control[16];
+    uint32_t pci_irq_map[8];
+    uint32_t obio_irq_map[32];
+    qemu_irq pci_irqs[32];
+    uint32_t reset_control;
+    unsigned int nr_resets;
+} APBState;
 
-static uint32_t pci_apb_config_readl (void *opaque,
-                                            target_phys_addr_t addr)
+static void apb_config_writel (void *opaque, target_phys_addr_t addr,
+                               uint32_t val)
 {
     APBState *s = opaque;
-    uint32_t val;
-
-    val = s->config_reg;
-#ifdef TARGET_WORDS_BIGENDIAN
-    val = bswap32(val);
-#endif
-    APB_DPRINTF("config_readl addr " TARGET_FMT_plx " val %x\n", addr,
-                val);
-    return val;
-}
 
-static CPUWriteMemoryFunc *pci_apb_config_write[] = {
-    &pci_apb_config_writel,
-    &pci_apb_config_writel,
-    &pci_apb_config_writel,
-};
-
-static CPUReadMemoryFunc *pci_apb_config_read[] = {
-    &pci_apb_config_readl,
-    &pci_apb_config_readl,
-    &pci_apb_config_readl,
-};
+    APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %x\n", __func__, addr, val);
 
-static void apb_config_writel (void *opaque, target_phys_addr_t addr,
-                               uint32_t val)
-{
-    //PCIBus *s = opaque;
-
-    switch (addr & 0x3f) {
-    case 0x00: // Control/Status
-    case 0x10: // AFSR
-    case 0x18: // AFAR
-    case 0x20: // Diagnostic
-    case 0x28: // Target address space
-        // XXX
+    switch (addr & 0xffff) {
+    case 0x30 ... 0x4f: /* DMA error registers */
+        /* XXX: not implemented yet */
+        break;
+    case 0x200 ... 0x20b: /* IOMMU */
+        s->iommu[(addr & 0xf) >> 2] = val;
+        break;
+    case 0x20c ... 0x3ff: /* IOMMU flush */
+        break;
+    case 0xc00 ... 0xc3f: /* PCI interrupt control */
+        if (addr & 4) {
+            s->pci_irq_map[(addr & 0x3f) >> 3] &= PBM_PCI_IMR_MASK;
+            s->pci_irq_map[(addr & 0x3f) >> 3] |= val & ~PBM_PCI_IMR_MASK;
+        }
+        break;
+    case 0x2000 ... 0x202f: /* PCI control */
+        s->pci_control[(addr & 0x3f) >> 2] = val;
+        break;
+    case 0xf020 ... 0xf027: /* Reset control */
+        if (addr & 4) {
+            val &= RESET_MASK;
+            s->reset_control &= ~(val & RESET_WCMASK);
+            s->reset_control |= val & RESET_WMASK;
+            if (val & SOFT_POR) {
+                s->nr_resets = 0;
+                qemu_system_reset_request();
+            } else if (val & SOFT_XIR) {
+                qemu_system_reset_request();
+            }
+        }
+        break;
+    case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */
+    case 0xa400 ... 0xa67f: /* IOMMU diagnostics */
+    case 0xa800 ... 0xa80f: /* Interrupt diagnostics */
+    case 0xf000 ... 0xf01f: /* FFB config, memory control */
+        /* we don't care */
     default:
         break;
     }
@@ -104,70 +127,108 @@ static void apb_config_writel (void *opaque, target_phys_addr_t addr,
 static uint32_t apb_config_readl (void *opaque,
                                   target_phys_addr_t addr)
 {
-    //PCIBus *s = opaque;
+    APBState *s = opaque;
     uint32_t val;
 
-    switch (addr & 0x3f) {
-    case 0x00: // Control/Status
-    case 0x10: // AFSR
-    case 0x18: // AFAR
-    case 0x20: // Diagnostic
-    case 0x28: // Target address space
-        // XXX
+    switch (addr & 0xffff) {
+    case 0x30 ... 0x4f: /* DMA error registers */
+        val = 0;
+        /* XXX: not implemented yet */
+        break;
+    case 0x200 ... 0x20b: /* IOMMU */
+        val = s->iommu[(addr & 0xf) >> 2];
+        break;
+    case 0x20c ... 0x3ff: /* IOMMU flush */
+        val = 0;
+        break;
+    case 0xc00 ... 0xc3f: /* PCI interrupt control */
+        if (addr & 4) {
+            val = s->pci_irq_map[(addr & 0x3f) >> 3];
+        } else {
+            val = 0;
+        }
+        break;
+    case 0x2000 ... 0x202f: /* PCI control */
+        val = s->pci_control[(addr & 0x3f) >> 2];
+        break;
+    case 0xf020 ... 0xf027: /* Reset control */
+        if (addr & 4) {
+            val = s->reset_control;
+        } else {
+            val = 0;
+        }
+        break;
+    case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */
+    case 0xa400 ... 0xa67f: /* IOMMU diagnostics */
+    case 0xa800 ... 0xa80f: /* Interrupt diagnostics */
+    case 0xf000 ... 0xf01f: /* FFB config, memory control */
+        /* we don't care */
     default:
         val = 0;
         break;
     }
+    APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, val);
+
     return val;
 }
 
-static CPUWriteMemoryFunc *apb_config_write[] = {
+static CPUWriteMemoryFunc * const apb_config_write[] = {
     &apb_config_writel,
     &apb_config_writel,
     &apb_config_writel,
 };
 
-static CPUReadMemoryFunc *apb_config_read[] = {
+static CPUReadMemoryFunc * const apb_config_read[] = {
     &apb_config_readl,
     &apb_config_readl,
     &apb_config_readl,
 };
 
-static CPUWriteMemoryFunc *pci_apb_write[] = {
-    &pci_host_data_writeb,
-    &pci_host_data_writew,
-    &pci_host_data_writel,
-};
+static void apb_pci_config_write(ReadWriteHandler *h, pcibus_t addr,
+                                 uint32_t val, int size)
+{
+    APBState *s = container_of(h, APBState, pci_config_handler);
 
-static CPUReadMemoryFunc *pci_apb_read[] = {
-    &pci_host_data_readb,
-    &pci_host_data_readw,
-    &pci_host_data_readl,
-};
+    val = qemu_bswap_len(val, size);
+    APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %x\n", __func__, addr, val);
+    pci_data_write(s->bus, addr, val, size);
+}
+
+static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
+                                    int size)
+{
+    uint32_t ret;
+    APBState *s = container_of(h, APBState, pci_config_handler);
+
+    ret = pci_data_read(s->bus, addr, size);
+    ret = qemu_bswap_len(ret, size);
+    APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, ret);
+    return ret;
+}
 
 static void pci_apb_iowriteb (void *opaque, target_phys_addr_t addr,
                                   uint32_t val)
 {
-    cpu_outb(NULL, addr & 0xffff, val);
+    cpu_outb(addr & IOPORTS_MASK, val);
 }
 
 static void pci_apb_iowritew (void *opaque, target_phys_addr_t addr,
                                   uint32_t val)
 {
-    cpu_outw(NULL, addr & 0xffff, val);
+    cpu_outw(addr & IOPORTS_MASK, bswap16(val));
 }
 
 static void pci_apb_iowritel (void *opaque, target_phys_addr_t addr,
                                 uint32_t val)
 {
-    cpu_outl(NULL, addr & 0xffff, val);
+    cpu_outl(addr & IOPORTS_MASK, bswap32(val));
 }
 
 static uint32_t pci_apb_ioreadb (void *opaque, target_phys_addr_t addr)
 {
     uint32_t val;
 
-    val = cpu_inb(NULL, addr & 0xffff);
+    val = cpu_inb(addr & IOPORTS_MASK);
     return val;
 }
 
@@ -175,7 +236,7 @@ static uint32_t pci_apb_ioreadw (void *opaque, target_phys_addr_t addr)
 {
     uint32_t val;
 
-    val = cpu_inw(NULL, addr & 0xffff);
+    val = bswap16(cpu_inw(addr & IOPORTS_MASK));
     return val;
 }
 
@@ -183,17 +244,17 @@ static uint32_t pci_apb_ioreadl (void *opaque, target_phys_addr_t addr)
 {
     uint32_t val;
 
-    val = cpu_inl(NULL, addr & 0xffff);
+    val = bswap32(cpu_inl(addr & IOPORTS_MASK));
     return val;
 }
 
-static CPUWriteMemoryFunc *pci_apb_iowrite[] = {
+static CPUWriteMemoryFunc * const pci_apb_iowrite[] = {
     &pci_apb_iowriteb,
     &pci_apb_iowritew,
     &pci_apb_iowritel,
 };
 
-static CPUReadMemoryFunc *pci_apb_ioread[] = {
+static CPUReadMemoryFunc * const pci_apb_ioread[] = {
     &pci_apb_ioreadb,
     &pci_apb_ioreadw,
     &pci_apb_ioreadl,
@@ -215,63 +276,178 @@ static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num)
     return bus_offset + irq_num;
 }
 
-static void pci_apb_set_irq(qemu_irq *pic, int irq_num, int level)
+static void pci_apb_set_irq(void *opaque, int irq_num, int level)
 {
+    APBState *s = opaque;
+
     /* PCI IRQ map onto the first 32 INO.  */
-    qemu_set_irq(pic[irq_num], level);
+    if (irq_num < 32) {
+        if (s->pci_irq_map[irq_num >> 2] & PBM_PCI_IMR_ENABLED) {
+            APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level);
+            qemu_set_irq(s->pci_irqs[irq_num], level);
+        } else {
+            APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num);
+            qemu_irq_lower(s->pci_irqs[irq_num]);
+        }
+    }
+}
+
+static void apb_pci_bridge_init(PCIBus *b)
+{
+    PCIDevice *dev = pci_bridge_get_device(b);
+
+    /*
+     * command register:
+     * According to PCI bridge spec, after reset
+     *   bus master bit is off
+     *   memory space enable bit is off
+     * According to manual (805-1251.pdf).
+     *   the reset value should be zero unless the boot pin is tied high
+     *   (which is true) and thus it should be PCI_COMMAND_MEMORY.
+     */
+    pci_set_word(dev->config + PCI_COMMAND,
+                 PCI_COMMAND_MEMORY);
+    pci_set_word(dev->config + PCI_STATUS,
+                 PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
+                 PCI_STATUS_DEVSEL_MEDIUM);
+    pci_set_byte(dev->config + PCI_REVISION_ID, 0x11);
+    pci_set_byte(dev->config + PCI_HEADER_TYPE,
+                 pci_get_byte(dev->config + PCI_HEADER_TYPE) |
+                 PCI_HEADER_TYPE_MULTI_FUNCTION);
 }
 
 PCIBus *pci_apb_init(target_phys_addr_t special_base,
                      target_phys_addr_t mem_base,
-                     qemu_irq *pic)
+                     qemu_irq *pic, PCIBus **bus2, PCIBus **bus3)
 {
-    APBState *s;
-    PCIDevice *d;
-    int pci_mem_config, pci_mem_data, apb_config, pci_ioport;
-    PCIBus *secondary;
+    DeviceState *dev;
+    SysBusDevice *s;
+    APBState *d;
+    unsigned int i;
 
-    s = qemu_mallocz(sizeof(APBState));
     /* Ultrasparc PBM main bus */
-    s->bus = pci_register_bus(pci_apb_set_irq, pci_pbm_map_irq, pic, 0, 32);
+    dev = qdev_create(NULL, "pbm");
+    qdev_init_nofail(dev);
+    s = sysbus_from_qdev(dev);
+    /* apb_config */
+    sysbus_mmio_map(s, 0, special_base);
+    /* PCI configuration space */
+    sysbus_mmio_map(s, 1, special_base + 0x1000000ULL);
+    /* pci_ioport */
+    sysbus_mmio_map(s, 2, special_base + 0x2000000ULL);
+    d = FROM_SYSBUS(APBState, s);
+
+    d->bus = pci_register_bus(&d->busdev.qdev, "pci",
+                                         pci_apb_set_irq, pci_pbm_map_irq, d,
+                                         0, 32);
+    pci_bus_set_mem_base(d->bus, mem_base);
+
+    for (i = 0; i < 32; i++) {
+        sysbus_connect_irq(s, i, pic[i]);
+    }
 
-    pci_mem_config = cpu_register_io_memory(0, pci_apb_config_read,
-                                            pci_apb_config_write, s);
-    apb_config = cpu_register_io_memory(0, apb_config_read,
-                                        apb_config_write, s);
-    pci_mem_data = cpu_register_io_memory(0, pci_apb_read,
-                                          pci_apb_write, s);
-    pci_ioport = cpu_register_io_memory(0, pci_apb_ioread,
-                                          pci_apb_iowrite, s);
-
-    cpu_register_physical_memory(special_base + 0x2000ULL, 0x40, apb_config);
-    cpu_register_physical_memory(special_base + 0x1000000ULL, 0x10,
-                                 pci_mem_config);
-    cpu_register_physical_memory(special_base + 0x2000000ULL, 0x10000,
-                                 pci_ioport);
-    cpu_register_physical_memory(mem_base, 0x10000000,
-                                 pci_mem_data); // XXX size should be 4G-prom
-
-    d = pci_register_device(s->bus, "Advanced PCI Bus", sizeof(PCIDevice),
-                            0, NULL, NULL);
-    d->config[0x00] = 0x8e; // vendor_id : Sun
-    d->config[0x01] = 0x10;
-    d->config[0x02] = 0x00; // device_id
-    d->config[0x03] = 0xa0;
-    d->config[0x04] = 0x06; // command = bus master, pci mem
-    d->config[0x05] = 0x00;
-    d->config[0x06] = 0xa0; // status = fast back-to-back, 66MHz, no error
-    d->config[0x07] = 0x03; // status = medium devsel
-    d->config[0x08] = 0x00; // revision
-    d->config[0x09] = 0x00; // programming i/f
-    d->config[0x0A] = 0x00; // class_sub = pci host
-    d->config[0x0B] = 0x06; // class_base = PCI_bridge
-    d->config[0x0D] = 0x10; // latency_timer
-    d->config[0x0E] = 0x00; // header_type
+    pci_create_simple(d->bus, 0, "pbm");
 
     /* APB secondary busses */
-    secondary = pci_bridge_init(s->bus, 8, 0x108e5000, pci_apb_map_irq,
-                                "Advanced PCI Bus secondary bridge 1");
-    pci_bridge_init(s->bus, 9, 0x108e5000, pci_apb_map_irq,
-                    "Advanced PCI Bus secondary bridge 2");
-    return s->bus;
+    *bus2 = pci_bridge_init(d->bus, PCI_DEVFN(1, 0),
+                            PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
+                            pci_apb_map_irq,
+                            "Advanced PCI Bus secondary bridge 1");
+    apb_pci_bridge_init(*bus2);
+
+    *bus3 = pci_bridge_init(d->bus, PCI_DEVFN(1, 1),
+                            PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
+                            pci_apb_map_irq,
+                            "Advanced PCI Bus secondary bridge 2");
+    apb_pci_bridge_init(*bus3);
+
+    return d->bus;
 }
+
+static void pci_pbm_reset(DeviceState *d)
+{
+    unsigned int i;
+    APBState *s = container_of(d, APBState, busdev.qdev);
+
+    for (i = 0; i < 8; i++) {
+        s->pci_irq_map[i] &= PBM_PCI_IMR_MASK;
+    }
+
+    if (s->nr_resets++ == 0) {
+        /* Power on reset */
+        s->reset_control = POR;
+    }
+}
+
+static int pci_pbm_init_device(SysBusDevice *dev)
+{
+    APBState *s;
+    int pci_config, apb_config, pci_ioport;
+    unsigned int i;
+
+    s = FROM_SYSBUS(APBState, dev);
+    for (i = 0; i < 8; i++) {
+        s->pci_irq_map[i] = (0x1f << 6) | (i << 2);
+    }
+    for (i = 0; i < 32; i++) {
+        sysbus_init_irq(dev, &s->pci_irqs[i]);
+    }
+
+    /* apb_config */
+    apb_config = cpu_register_io_memory(apb_config_read,
+                                        apb_config_write, s);
+    /* at region 0 */
+    sysbus_init_mmio(dev, 0x10000ULL, apb_config);
+
+    /* PCI configuration space */
+    s->pci_config_handler.read = apb_pci_config_read;
+    s->pci_config_handler.write = apb_pci_config_write;
+    pci_config = cpu_register_io_memory_simple(&s->pci_config_handler);
+    assert(pci_config >= 0);
+    /* at region 1 */
+    sysbus_init_mmio(dev, 0x1000000ULL, pci_config);
+
+    /* pci_ioport */
+    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
+                                        pci_apb_iowrite, s);
+    /* at region 2 */
+    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
+
+    return 0;
+}
+
+static int pbm_pci_host_init(PCIDevice *d)
+{
+    pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_SUN);
+    pci_config_set_device_id(d->config, PCI_DEVICE_ID_SUN_SABRE);
+    pci_set_word(d->config + PCI_COMMAND,
+                 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+    pci_set_word(d->config + PCI_STATUS,
+                 PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
+                 PCI_STATUS_DEVSEL_MEDIUM);
+    pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
+    pci_set_byte(d->config + PCI_HEADER_TYPE,
+                 PCI_HEADER_TYPE_NORMAL);
+    return 0;
+}
+
+static PCIDeviceInfo pbm_pci_host_info = {
+    .qdev.name = "pbm",
+    .qdev.size = sizeof(PCIDevice),
+    .init      = pbm_pci_host_init,
+    .header_type  = PCI_HEADER_TYPE_BRIDGE,
+};
+
+static SysBusDeviceInfo pbm_host_info = {
+    .qdev.name = "pbm",
+    .qdev.size = sizeof(APBState),
+    .qdev.reset = pci_pbm_reset,
+    .init = pci_pbm_init_device,
+};
+static void pbm_register_devices(void)
+{
+    sysbus_register_withprop(&pbm_host_info);
+    pci_qdev_register(&pbm_pci_host_info);
+}
+
+device_init(pbm_register_devices)