#include "qemu/osdep.h"
#include "qapi/error.h"
-#include "qemu-common.h"
#include "cpu.h"
#include "exec/address-spaces.h"
#include "hw/arm/boot.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/misc/pca9552.h"
#include "hw/misc/tmp105.h"
+#include "hw/qdev-properties.h"
#include "qemu/log.h"
#include "sysemu/block-backend.h"
+#include "sysemu/sysemu.h"
#include "hw/loader.h"
#include "qemu/error-report.h"
#include "qemu/units.h"
static struct arm_boot_info aspeed_board_binfo = {
.board_id = -1, /* device-tree-only board */
- .nb_cpus = 1,
};
struct AspeedBoardState {
AspeedSoCState soc;
+ MemoryRegion ram_container;
MemoryRegion ram;
MemoryRegion max_ram;
};
SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+/* Swift hardware value: 0xF11AD206 */
+#define SWIFT_BMC_HW_STRAP1 ( \
+ AST2500_HW_STRAP1_DEFAULTS | \
+ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
+ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
+ SCU_AST2500_HW_STRAP_UART_DEBUG | \
+ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
+ SCU_H_PLL_BYPASS_EN | \
+ SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
+ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
AspeedSoCClass *sc;
DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
ram_addr_t max_ram_size;
+ int i;
bmc = g_new0(AspeedBoardState, 1);
+
+ memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container",
+ UINT32_MAX);
+
object_initialize_child(OBJECT(machine), "soc", &bmc->soc,
(sizeof(bmc->soc)), cfg->soc_name, &error_abort,
NULL);
&error_abort);
object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
&error_abort);
+ object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus",
+ &error_abort);
+ object_property_set_link(OBJECT(&bmc->soc), OBJECT(&bmc->ram_container),
+ "dram", &error_abort);
if (machine->kernel_filename) {
/*
* When booting with a -kernel command line there is no u-boot
&error_abort);
memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
- memory_region_add_subregion(get_system_memory(), sc->info->sdram_base,
- &bmc->ram);
- object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
- &error_abort);
+ memory_region_add_subregion(&bmc->ram_container, 0, &bmc->ram);
+ memory_region_add_subregion(get_system_memory(),
+ sc->info->memmap[ASPEED_SDRAM],
+ &bmc->ram_container);
max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
&error_abort);
memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
"max_ram", max_ram_size - ram_size);
- memory_region_add_subregion(get_system_memory(),
- sc->info->sdram_base + ram_size,
- &bmc->max_ram);
+ memory_region_add_subregion(&bmc->ram_container, ram_size, &bmc->max_ram);
aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);
write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
}
- aspeed_board_binfo.kernel_filename = machine->kernel_filename;
- aspeed_board_binfo.initrd_filename = machine->initrd_filename;
- aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
aspeed_board_binfo.ram_size = ram_size;
- aspeed_board_binfo.loader_start = sc->info->sdram_base;
+ aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM];
+ aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus;
if (cfg->i2c_init) {
cfg->i2c_init(bmc);
}
- arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo);
+ for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) {
+ SDHCIState *sdhci = &bmc->soc.sdhci.slots[i];
+ DriveInfo *dinfo = drive_get_next(IF_SD);
+ BlockBackend *blk;
+ DeviceState *card;
+
+ blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
+ card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"),
+ TYPE_SD_CARD);
+ qdev_prop_set_drive(card, "drive", blk, &error_fatal);
+ object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
+ }
+
+ arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
}
static void palmetto_bmc_i2c_init(AspeedBoardState *bmc)
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
}
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+ /* The swift board expects a TMP275 but a TMP105 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+ /* The swift board expects a pca9551 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+ /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+ /* The swift board expects a pca9539 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+ /* The swift board expects a pca9539 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+ 0x74);
+
+ /* The swift board expects a TMP275 but a TMP105 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
mc->desc = board->desc;
mc->init = aspeed_machine_init;
- mc->max_cpus = 1;
- mc->no_sdcard = 1;
+ mc->max_cpus = ASPEED_CPUS_NUM;
mc->no_floppy = 1;
mc->no_cdrom = 1;
mc->no_parallel = 1;
.num_cs = 2,
.i2c_init = romulus_bmc_i2c_init,
.ram = 512 * MiB,
+ }, {
+ .name = MACHINE_TYPE_NAME("swift-bmc"),
+ .desc = "OpenPOWER Swift BMC (ARM1176)",
+ .soc_name = "ast2500-a1",
+ .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+ .fmc_model = "mx66l1g45g",
+ .spi_model = "mx66l1g45g",
+ .num_cs = 2,
+ .i2c_init = swift_bmc_i2c_init,
+ .ram = 512 * MiB,
}, {
.name = MACHINE_TYPE_NAME("witherspoon-bmc"),
.desc = "OpenPOWER Witherspoon BMC (ARM1176)",
projects / mirror_qemu.git / blobdiff