#include "hw/arm/boot.h"
#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
+#include "hw/i2c/i2c_mux_pca954x.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/misc/pca9552.h"
-#include "hw/misc/tmp105.h"
+#include "hw/sensor/tmp105.h"
#include "hw/misc/led.h"
#include "hw/qdev-properties.h"
#include "sysemu/block-backend.h"
+#include "sysemu/reset.h"
#include "hw/loader.h"
#include "qemu/error-report.h"
#include "qemu/units.h"
+#include "hw/qdev-clock.h"
+#include "sysemu/sysemu.h"
static struct arm_boot_info aspeed_board_binfo = {
.board_id = -1, /* device-tree-only board */
SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
SCU_AST2500_HW_STRAP_RESERVED1)
-/* Swift hardware value: 0xF11AD206 */
-#define SWIFT_BMC_HW_STRAP1 ( \
- AST2500_HW_STRAP1_DEFAULTS | \
+#define G220A_BMC_HW_STRAP1 ( \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
+ SCU_AST2500_HW_STRAP_RESERVED28 | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
- SCU_H_PLL_BYPASS_EN | \
- SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
- SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+ SCU_HW_STRAP_2ND_BOOT_WDT | \
+ SCU_HW_STRAP_VGA_CLASS_CODE | \
+ SCU_HW_STRAP_LPC_RESET_PIN | \
+ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
+ SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
+ SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \
+ SCU_AST2500_HW_STRAP_RESERVED1)
-#define G220A_BMC_HW_STRAP1 ( \
+/* FP5280G2 hardware value: 0XF100D286 */
+#define FP5280G2_BMC_HW_STRAP1 ( \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_RESERVED28 | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
- SCU_HW_STRAP_2ND_BOOT_WDT | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_LPC_RESET_PIN | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
- SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \
+ SCU_HW_STRAP_MAC1_RGMII | \
+ SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
SCU_AST2500_HW_STRAP_RESERVED1)
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define TACOMA_BMC_HW_STRAP2 0x00000040
/* Rainier hardware value: (QEMU prototype) */
-#define RAINIER_BMC_HW_STRAP1 0x00000000
-#define RAINIER_BMC_HW_STRAP2 0x00000000
+#define RAINIER_BMC_HW_STRAP1 0x00422016
+#define RAINIER_BMC_HW_STRAP2 0x80000848
-/*
- * The max ram region is for firmwares that scan the address space
- * with load/store to guess how much RAM the SoC has.
- */
-static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size)
-{
- return 0;
-}
+/* Fuji hardware value */
+#define FUJI_BMC_HW_STRAP1 0x00000000
+#define FUJI_BMC_HW_STRAP2 0x00000000
-static void max_ram_write(void *opaque, hwaddr offset, uint64_t value,
- unsigned size)
-{
- /* Discard writes */
-}
+/* Bletchley hardware value */
+/* TODO: Leave same as EVB for now. */
+#define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
+#define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2
-static const MemoryRegionOps max_ram_ops = {
- .read = max_ram_read,
- .write = max_ram_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
+/* Qualcomm DC-SCM hardware value */
+#define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000
+#define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041
#define AST_SMP_MAILBOX_BASE 0x1e6e2180
#define AST_SMP_MBOX_FIELD_ENTRY (AST_SMP_MAILBOX_BASE + 0x0)
Error **errp)
{
BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
- uint8_t *storage;
+ g_autofree void *storage = NULL;
int64_t size;
/* The block backend size should have already been 'validated' by
rom_size = size;
}
- storage = g_new0(uint8_t, rom_size);
- if (blk_pread(blk, 0, storage, rom_size) < 0) {
+ storage = g_malloc0(rom_size);
+ if (blk_pread(blk, 0, rom_size, storage, 0) < 0) {
error_setg(errp, "failed to read the initial flash content");
return;
}
rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
- g_free(storage);
}
-static void aspeed_board_init_flashes(AspeedSMCState *s,
- const char *flashtype)
+void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
+ unsigned int count, int unit0)
{
- int i ;
+ int i;
- for (i = 0; i < s->num_cs; ++i) {
- AspeedSMCFlash *fl = &s->flashes[i];
- DriveInfo *dinfo = drive_get_next(IF_MTD);
+ if (!flashtype) {
+ return;
+ }
+
+ for (i = 0; i < count; ++i) {
+ DriveInfo *dinfo = drive_get(IF_MTD, 0, unit0 + i);
qemu_irq cs_line;
+ DeviceState *dev;
- fl->flash = qdev_new(flashtype);
+ dev = qdev_new(flashtype);
if (dinfo) {
- qdev_prop_set_drive(fl->flash, "drive",
- blk_by_legacy_dinfo(dinfo));
+ qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo));
}
- qdev_realize_and_unref(fl->flash, BUS(s->spi), &error_fatal);
+ qdev_realize_and_unref(dev, BUS(s->spi), &error_fatal);
- cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
+ cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
}
}
&error_fatal);
}
+static void connect_serial_hds_to_uarts(AspeedMachineState *bmc)
+{
+ AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc);
+ AspeedSoCState *s = &bmc->soc;
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+
+ aspeed_soc_uart_set_chr(s, amc->uart_default, serial_hd(0));
+ for (int i = 1, uart = ASPEED_DEV_UART1; i < sc->uarts_num; i++, uart++) {
+ if (uart == amc->uart_default) {
+ continue;
+ }
+ aspeed_soc_uart_set_chr(s, uart, serial_hd(i));
+ }
+}
+
static void aspeed_machine_init(MachineState *machine)
{
AspeedMachineState *bmc = ASPEED_MACHINE(machine);
AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);
AspeedSoCClass *sc;
DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
- ram_addr_t max_ram_size;
int i;
NICInfo *nd = &nd_table[0];
- memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container",
- 4 * GiB);
- memory_region_add_subregion(&bmc->ram_container, 0, machine->ram);
-
object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name);
sc = ASPEED_SOC_GET_CLASS(&bmc->soc);
/*
- * This will error out if isize is not supported by memory controller.
+ * This will error out if the RAM size is not supported by the
+ * memory controller of the SoC.
*/
object_property_set_uint(OBJECT(&bmc->soc), "ram-size", machine->ram_size,
&error_fatal);
&error_abort);
object_property_set_int(OBJECT(&bmc->soc), "hw-strap2", amc->hw_strap2,
&error_abort);
- object_property_set_int(OBJECT(&bmc->soc), "num-cs", amc->num_cs,
- &error_abort);
+ object_property_set_link(OBJECT(&bmc->soc), "memory",
+ OBJECT(get_system_memory()), &error_abort);
object_property_set_link(OBJECT(&bmc->soc), "dram",
OBJECT(machine->ram), &error_abort);
if (machine->kernel_filename) {
object_property_set_int(OBJECT(&bmc->soc), "hw-prot-key",
ASPEED_SCU_PROT_KEY, &error_abort);
}
+ connect_serial_hds_to_uarts(bmc);
qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
- memory_region_add_subregion(get_system_memory(),
- sc->memmap[ASPEED_DEV_SDRAM],
- &bmc->ram_container);
-
- max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
- &error_abort);
- memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
- "max_ram", max_ram_size - machine->ram_size);
- memory_region_add_subregion(&bmc->ram_container, machine->ram_size, &bmc->max_ram);
-
- aspeed_board_init_flashes(&bmc->soc.fmc, bmc->fmc_model ?
- bmc->fmc_model : amc->fmc_model);
- aspeed_board_init_flashes(&bmc->soc.spi[0], bmc->spi_model ?
- bmc->spi_model : amc->spi_model);
+ aspeed_board_init_flashes(&bmc->soc.fmc,
+ bmc->fmc_model ? bmc->fmc_model : amc->fmc_model,
+ amc->num_cs, 0);
+ aspeed_board_init_flashes(&bmc->soc.spi[0],
+ bmc->spi_model ? bmc->spi_model : amc->spi_model,
+ 1, amc->num_cs);
/* Install first FMC flash content as a boot rom. */
if (drive0) {
AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
MemoryRegion *boot_rom = g_new(MemoryRegion, 1);
+ uint64_t size = memory_region_size(&fl->mmio);
/*
* create a ROM region using the default mapping window size of
*/
if (ASPEED_MACHINE(machine)->mmio_exec) {
memory_region_init_alias(boot_rom, NULL, "aspeed.boot_rom",
- &fl->mmio, 0, fl->size);
+ &fl->mmio, 0, size);
memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
boot_rom);
} else {
memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom",
- fl->size, &error_abort);
+ size, &error_abort);
memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
boot_rom);
- write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
+ write_boot_rom(drive0, FIRMWARE_ADDR, size, &error_abort);
}
}
aspeed_board_binfo.ram_size = machine->ram_size;
aspeed_board_binfo.loader_start = sc->memmap[ASPEED_DEV_SDRAM];
- aspeed_board_binfo.nb_cpus = sc->num_cpus;
if (amc->i2c_init) {
amc->i2c_init(bmc);
}
for (i = 0; i < bmc->soc.sdhci.num_slots; i++) {
- sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD));
+ sdhci_attach_drive(&bmc->soc.sdhci.slots[i],
+ drive_get(IF_SD, 0, i));
}
if (bmc->soc.emmc.num_slots) {
- sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD));
+ sdhci_attach_drive(&bmc->soc.emmc.slots[0],
+ drive_get(IF_SD, 0, bmc->soc.sdhci.num_slots));
}
arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
}
+static void at24c_eeprom_init(I2CBus *bus, uint8_t addr, uint32_t rsize)
+{
+ I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr);
+ DeviceState *dev = DEVICE(i2c_dev);
+
+ qdev_prop_set_uint32(dev, "rom-size", rsize);
+ i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort);
+}
+
static void palmetto_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
/* TODO: i2c-1: Add Frontpanel FRU eeprom@57 24c64 */
/* TODO: Add Memory Riser i2c mux and eeproms. */
- /* TODO: i2c-2: pca9546@74 */
- /* TODO: i2c-2: pca9548@77 */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9546", 0x74);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9548", 0x77);
+
/* TODO: i2c-3: Add BIOS FRU eeprom@56 24c64 */
- /* TODO: i2c-7: Add pca9546@70 */
+
+ /* i2c-7 */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9546", 0x70);
/* - i2c@0: pmbus@59 */
/* - i2c@1: pmbus@58 */
/* - i2c@2: pmbus@58 */
/* - i2c@3: pmbus@59 */
+
/* TODO: i2c-7: Add PDB FRU eeprom@52 */
/* TODO: i2c-8: Add BMC FRU eeprom@50 */
}
/* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7),
TYPE_TMP105, 0x4d);
-
- /* The AST2500 EVB does not have an RTC. Let's pretend that one is
- * plugged on the I2C bus header */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
}
static void ast2600_evb_i2c_init(AspeedMachineState *bmc)
{
- /* Start with some devices on our I2C busses */
- ast2500_evb_i2c_init(bmc);
+ AspeedSoCState *soc = &bmc->soc;
+ uint8_t *eeprom_buf = g_malloc0(8 * 1024);
+
+ smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50,
+ eeprom_buf);
+
+ /* LM75 is compatible with TMP105 driver */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8),
+ TYPE_TMP105, 0x4d);
}
static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
}
-static void swift_bmc_i2c_init(AspeedMachineState *bmc)
+static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr)
{
- AspeedSoCState *soc = &bmc->soc;
-
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
-
- /* The swift board expects a TMP275 but a TMP105 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
- /* The swift board expects a pca9551 but a pca9552 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
-
- /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
-
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
- /* The swift board expects a pca9539 but a pca9552 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
-
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
- /* The swift board expects a pca9539 but a pca9552 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
- 0x74);
-
- /* The swift board expects a TMP275 but a TMP105 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id),
+ TYPE_PCA9552, addr);
}
static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54,
eeprom4_54);
/* PCA9539 @ 0x76, but PCA9552 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
+ create_pca9552(soc, 4, 0x76);
/* PCA9539 @ 0x77, but PCA9552 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
+ create_pca9552(soc, 4, 0x77);
/* bus 6 : */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
uint8_t *eeprom8_56 = g_malloc0(8 * 1024);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56,
eeprom8_56);
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
+ create_pca9552(soc, 8, 0x60);
+ create_pca9552(soc, 8, 0x61);
/* bus 8 : adc128d818 @ 0x1d */
/* bus 8 : adc128d818 @ 0x1f */
LEDState *led;
/* Bus 3: TODO bmp280@77 */
- /* Bus 3: TODO max31785@52 */
- /* Bus 3: TODO dps310@76 */
dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca1");
i2c_slave_realize_and_unref(I2C_SLAVE(dev),
qdev_connect_gpio_out(dev, pca1_leds[i].gpio_id,
qdev_get_gpio_in(DEVICE(led), 0));
}
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "dps310", 0x76);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "max31785", 0x52);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
eeprom_buf);
}
+static void aspeed_eeprom_init(I2CBus *bus, uint8_t addr, uint32_t rsize)
+{
+ I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr);
+ DeviceState *dev = DEVICE(i2c_dev);
+
+ qdev_prop_set_uint32(dev, "rom-size", rsize);
+ i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort);
+}
+
+static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+ I2CSlave *i2c_mux;
+
+ /* The at24c256 */
+ at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768);
+
+ /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
+ 0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
+ 0x49);
+
+ i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
+ "pca9546", 0x70);
+ /* It expects a TMP112 but a TMP105 is compatible */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105,
+ 0x4a);
+
+ /* It expects a ds3232 but a ds1338 is good enough */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68);
+
+ /* It expects a pca9555 but a pca9552 is compatible */
+ create_pca9552(soc, 8, 0x30);
+}
+
static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
+ I2CSlave *i2c_mux;
+
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 0), 0x51, 32 * KiB);
+
+ create_pca9552(soc, 3, 0x61);
/* The rainier expects a TMP275 but a TMP105 is compatible */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105,
0x49);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105,
0x4a);
+ i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4),
+ "pca9546", 0x70);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x52, 64 * KiB);
+ create_pca9552(soc, 4, 0x60);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
0x49);
+ create_pca9552(soc, 5, 0x60);
+ create_pca9552(soc, 5, 0x61);
+ i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5),
+ "pca9546", 0x70);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105,
0x48);
0x4a);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105,
0x4b);
-
- /* Bus 7: TODO dps310@76 */
- /* Bus 7: TODO max31785@52 */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x61);
+ i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6),
+ "pca9546", 0x70);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB);
+
+ create_pca9552(soc, 7, 0x30);
+ create_pca9552(soc, 7, 0x31);
+ create_pca9552(soc, 7, 0x32);
+ create_pca9552(soc, 7, 0x33);
+ create_pca9552(soc, 7, 0x60);
+ create_pca9552(soc, 7, 0x61);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76);
/* Bus 7: TODO si7021-a20@20 */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105,
0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "max31785", 0x52);
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50, 64 * KiB);
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x51, 64 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105,
0x4a);
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x50, 64 * KiB);
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 64 * KiB);
+ create_pca9552(soc, 8, 0x60);
+ create_pca9552(soc, 8, 0x61);
/* Bus 8: ucd90320@11 */
/* Bus 8: ucd90320@b */
/* Bus 8: ucd90320@c */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4d);
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 9), 0x50, 128 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4d);
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 10), 0x50, 128 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105,
0x49);
+ i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11),
+ "pca9546", 0x70);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
+ aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
+ create_pca9552(soc, 11, 0x60);
+
+
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 13), 0x50, 64 * KiB);
+ create_pca9552(soc, 13, 0x60);
+
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 14), 0x50, 64 * KiB);
+ create_pca9552(soc, 14, 0x60);
+
+ aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 15), 0x50, 64 * KiB);
+ create_pca9552(soc, 15, 0x60);
+}
+
+static void get_pca9548_channels(I2CBus *bus, uint8_t mux_addr,
+ I2CBus **channels)
+{
+ I2CSlave *mux = i2c_slave_create_simple(bus, "pca9548", mux_addr);
+ for (int i = 0; i < 8; i++) {
+ channels[i] = pca954x_i2c_get_bus(mux, i);
+ }
+}
+
+#define TYPE_LM75 TYPE_TMP105
+#define TYPE_TMP75 TYPE_TMP105
+#define TYPE_TMP422 "tmp422"
+
+static void fuji_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+ I2CBus *i2c[144] = {};
+
+ for (int i = 0; i < 16; i++) {
+ i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+ }
+ I2CBus *i2c180 = i2c[2];
+ I2CBus *i2c480 = i2c[8];
+ I2CBus *i2c600 = i2c[11];
+
+ get_pca9548_channels(i2c180, 0x70, &i2c[16]);
+ get_pca9548_channels(i2c480, 0x70, &i2c[24]);
+ /* NOTE: The device tree skips [32, 40) in the alias numbering */
+ get_pca9548_channels(i2c600, 0x77, &i2c[40]);
+ get_pca9548_channels(i2c[24], 0x71, &i2c[48]);
+ get_pca9548_channels(i2c[25], 0x72, &i2c[56]);
+ get_pca9548_channels(i2c[26], 0x76, &i2c[64]);
+ get_pca9548_channels(i2c[27], 0x76, &i2c[72]);
+ for (int i = 0; i < 8; i++) {
+ get_pca9548_channels(i2c[40 + i], 0x76, &i2c[80 + i * 8]);
+ }
+
+ i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4c);
+ i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4d);
+
+ aspeed_eeprom_init(i2c[19], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[20], 0x50, 2 * KiB);
+ aspeed_eeprom_init(i2c[22], 0x52, 2 * KiB);
+
+ i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x48);
+ i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x49);
+ i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x4a);
+ i2c_slave_create_simple(i2c[3], TYPE_TMP422, 0x4c);
+
+ aspeed_eeprom_init(i2c[8], 0x51, 64 * KiB);
+ i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x4a);
+
+ i2c_slave_create_simple(i2c[50], TYPE_LM75, 0x4c);
+ aspeed_eeprom_init(i2c[50], 0x52, 64 * KiB);
+ i2c_slave_create_simple(i2c[51], TYPE_TMP75, 0x48);
+ i2c_slave_create_simple(i2c[52], TYPE_TMP75, 0x49);
+
+ i2c_slave_create_simple(i2c[59], TYPE_TMP75, 0x48);
+ i2c_slave_create_simple(i2c[60], TYPE_TMP75, 0x49);
+
+ aspeed_eeprom_init(i2c[65], 0x53, 64 * KiB);
+ i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x49);
+ i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x48);
+ aspeed_eeprom_init(i2c[68], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[69], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[70], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[71], 0x52, 64 * KiB);
+
+ aspeed_eeprom_init(i2c[73], 0x53, 64 * KiB);
+ i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x49);
+ i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x48);
+ aspeed_eeprom_init(i2c[76], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[77], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[78], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[79], 0x52, 64 * KiB);
+ aspeed_eeprom_init(i2c[28], 0x50, 2 * KiB);
+
+ for (int i = 0; i < 8; i++) {
+ aspeed_eeprom_init(i2c[81 + i * 8], 0x56, 64 * KiB);
+ i2c_slave_create_simple(i2c[82 + i * 8], TYPE_TMP75, 0x48);
+ i2c_slave_create_simple(i2c[83 + i * 8], TYPE_TMP75, 0x4b);
+ i2c_slave_create_simple(i2c[84 + i * 8], TYPE_TMP75, 0x4a);
+ }
+}
+
+#define TYPE_TMP421 "tmp421"
+
+static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+ I2CBus *i2c[13] = {};
+ for (int i = 0; i < 13; i++) {
+ if ((i == 8) || (i == 11)) {
+ continue;
+ }
+ i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+ }
+
+ /* Bus 0 - 5 all have the same config. */
+ for (int i = 0; i < 6; i++) {
+ /* Missing model: ti,ina230 @ 0x45 */
+ /* Missing model: mps,mp5023 @ 0x40 */
+ i2c_slave_create_simple(i2c[i], TYPE_TMP421, 0x4f);
+ /* Missing model: nxp,pca9539 @ 0x76, but PCA9552 works enough */
+ i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x76);
+ i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x67);
+ /* Missing model: fsc,fusb302 @ 0x22 */
+ }
+
+ /* Bus 6 */
+ at24c_eeprom_init(i2c[6], 0x56, 65536);
+ /* Missing model: nxp,pcf85263 @ 0x51 , but ds1338 works enough */
+ i2c_slave_create_simple(i2c[6], "ds1338", 0x51);
+
+
+ /* Bus 7 */
+ at24c_eeprom_init(i2c[7], 0x54, 65536);
+
+ /* Bus 9 */
+ i2c_slave_create_simple(i2c[9], TYPE_TMP421, 0x4f);
+
+ /* Bus 10 */
+ i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x4f);
+ /* Missing model: ti,hdc1080 @ 0x40 */
+ i2c_slave_create_simple(i2c[10], TYPE_PCA9552, 0x67);
+
+ /* Bus 12 */
+ /* Missing model: adi,adm1278 @ 0x11 */
+ i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4c);
+ i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4d);
+ i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67);
+}
+
+static void fby35_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+ I2CBus *i2c[16];
+
+ for (int i = 0; i < 16; i++) {
+ i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+ }
+
+ i2c_slave_create_simple(i2c[2], TYPE_LM75, 0x4f);
+ i2c_slave_create_simple(i2c[8], TYPE_TMP421, 0x1f);
+ /* Hotswap controller is actually supposed to be mp5920 or ltc4282. */
+ i2c_slave_create_simple(i2c[11], "adm1272", 0x44);
+ i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4e);
+ i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4f);
+
+ aspeed_eeprom_init(i2c[4], 0x51, 128 * KiB);
+ aspeed_eeprom_init(i2c[6], 0x51, 128 * KiB);
+ aspeed_eeprom_init(i2c[8], 0x50, 32 * KiB);
+ aspeed_eeprom_init(i2c[11], 0x51, 128 * KiB);
+ aspeed_eeprom_init(i2c[11], 0x54, 128 * KiB);
+
+ /*
+ * TODO: There is a multi-master i2c connection to an AST1030 MiniBMC on
+ * buses 0, 1, 2, 3, and 9. Source address 0x10, target address 0x20 on
+ * each.
+ */
+}
+
+static void qcom_dc_scm_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 15), "tmp105", 0x4d);
+}
+
+static void qcom_dc_scm_firework_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+ I2CSlave *therm_mux, *cpuvr_mux;
+
+ /* Create the generic DC-SCM hardware */
+ qcom_dc_scm_bmc_i2c_init(bmc);
+
+ /* Now create the Firework specific hardware */
+
+ /* I2C7 CPUVR MUX */
+ cpuvr_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7),
+ "pca9546", 0x70);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 0), "pca9548", 0x72);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 1), "pca9548", 0x72);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 2), "pca9548", 0x72);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 3), "pca9548", 0x72);
+
+ /* I2C8 Thermal Diodes*/
+ therm_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8),
+ "pca9548", 0x70);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 0), TYPE_LM75, 0x4C);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 1), TYPE_LM75, 0x4C);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 2), TYPE_LM75, 0x48);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 3), TYPE_LM75, 0x48);
+ i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 4), TYPE_LM75, 0x48);
+
+ /* I2C9 Fan Controller (MAX31785) */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x52);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x54);
}
static bool aspeed_get_mmio_exec(Object *obj, Error **errp)
mc->no_parallel = 1;
mc->default_ram_id = "ram";
amc->macs_mask = ASPEED_MAC0_ON;
+ amc->uart_default = ASPEED_DEV_UART5;
aspeed_machine_class_props_init(oc);
}
mc->desc = "Aspeed AST2500 EVB (ARM1176)";
amc->soc_name = "ast2500-a1";
amc->hw_strap1 = AST2500_EVB_HW_STRAP1;
- amc->fmc_model = "w25q256";
+ amc->fmc_model = "mx25l25635e";
amc->spi_model = "mx25l25635e";
amc->num_cs = 1;
amc->i2c_init = ast2500_evb_i2c_init;
aspeed_soc_num_cpus(amc->soc_name);
};
-static void aspeed_machine_swift_class_init(ObjectClass *oc, void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
- AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
-
- mc->desc = "OpenPOWER Swift BMC (ARM1176)";
- amc->soc_name = "ast2500-a1";
- amc->hw_strap1 = SWIFT_BMC_HW_STRAP1;
- amc->fmc_model = "mx66l1g45g";
- amc->spi_model = "mx66l1g45g";
- amc->num_cs = 2;
- amc->i2c_init = swift_bmc_i2c_init;
- mc->default_ram_size = 512 * MiB;
- mc->default_cpus = mc->min_cpus = mc->max_cpus =
- aspeed_soc_num_cpus(amc->soc_name);
-
- mc->deprecation_reason = "redundant system. Please use a similar "
- "OpenPOWER BMC, Witherspoon or Romulus.";
-};
-
static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Aspeed AST2600 EVB (Cortex-A7)";
- amc->soc_name = "ast2600-a1";
+ amc->soc_name = "ast2600-a3";
amc->hw_strap1 = AST2600_EVB_HW_STRAP1;
amc->hw_strap2 = AST2600_EVB_HW_STRAP2;
- amc->fmc_model = "w25q512jv";
+ amc->fmc_model = "mx66u51235f";
amc->spi_model = "mx66u51235f";
amc->num_cs = 1;
- amc->macs_mask = ASPEED_MAC1_ON | ASPEED_MAC2_ON | ASPEED_MAC3_ON;
+ amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON |
+ ASPEED_MAC3_ON;
amc->i2c_init = ast2600_evb_i2c_init;
mc->default_ram_size = 1 * GiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "OpenPOWER Tacoma BMC (Cortex-A7)";
- amc->soc_name = "ast2600-a1";
+ amc->soc_name = "ast2600-a3";
amc->hw_strap1 = TACOMA_BMC_HW_STRAP1;
amc->hw_strap2 = TACOMA_BMC_HW_STRAP2;
amc->fmc_model = "mx66l1g45g";
amc->fmc_model = "n25q512a";
amc->spi_model = "mx25l25635e";
amc->num_cs = 2;
- amc->macs_mask = ASPEED_MAC1_ON | ASPEED_MAC2_ON;
+ amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
amc->i2c_init = g220a_bmc_i2c_init;
mc->default_ram_size = 1024 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
+static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Inspur FP5280G2 BMC (ARM1176)";
+ amc->soc_name = "ast2500-a1";
+ amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1;
+ amc->fmc_model = "n25q512a";
+ amc->spi_model = "mx25l25635e";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
+ amc->i2c_init = fp5280g2_bmc_i2c_init;
+ mc->default_ram_size = 512 * MiB;
+ mc->default_cpus = mc->min_cpus = mc->max_cpus =
+ aspeed_soc_num_cpus(amc->soc_name);
+};
+
static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "IBM Rainier BMC (Cortex-A7)";
- amc->soc_name = "ast2600-a1";
+ amc->soc_name = "ast2600-a3";
amc->hw_strap1 = RAINIER_BMC_HW_STRAP1;
amc->hw_strap2 = RAINIER_BMC_HW_STRAP2;
amc->fmc_model = "mx66l1g45g";
aspeed_soc_num_cpus(amc->soc_name);
};
+/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
+#if HOST_LONG_BITS == 32
+#define FUJI_BMC_RAM_SIZE (1 * GiB)
+#else
+#define FUJI_BMC_RAM_SIZE (2 * GiB)
+#endif
+
+static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Facebook Fuji BMC (Cortex-A7)";
+ amc->soc_name = "ast2600-a3";
+ amc->hw_strap1 = FUJI_BMC_HW_STRAP1;
+ amc->hw_strap2 = FUJI_BMC_HW_STRAP2;
+ amc->fmc_model = "mx66l1g45g";
+ amc->spi_model = "mx66l1g45g";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC3_ON;
+ amc->i2c_init = fuji_bmc_i2c_init;
+ amc->uart_default = ASPEED_DEV_UART1;
+ mc->default_ram_size = FUJI_BMC_RAM_SIZE;
+ mc->default_cpus = mc->min_cpus = mc->max_cpus =
+ aspeed_soc_num_cpus(amc->soc_name);
+};
+
+static void aspeed_machine_bletchley_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Facebook Bletchley BMC (Cortex-A7)";
+ amc->soc_name = "ast2600-a3";
+ amc->hw_strap1 = BLETCHLEY_BMC_HW_STRAP1;
+ amc->hw_strap2 = BLETCHLEY_BMC_HW_STRAP2;
+ amc->fmc_model = "w25q01jvq";
+ amc->spi_model = NULL;
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC2_ON;
+ amc->i2c_init = bletchley_bmc_i2c_init;
+ mc->default_ram_size = 512 * MiB;
+ mc->default_cpus = mc->min_cpus = mc->max_cpus =
+ aspeed_soc_num_cpus(amc->soc_name);
+}
+
+static void fby35_reset(MachineState *state)
+{
+ AspeedMachineState *bmc = ASPEED_MACHINE(state);
+ AspeedGPIOState *gpio = &bmc->soc.gpio;
+
+ qemu_devices_reset();
+
+ /* Board ID */
+ object_property_set_bool(OBJECT(gpio), "gpioV4", true, &error_fatal);
+ object_property_set_bool(OBJECT(gpio), "gpioV5", true, &error_fatal);
+ object_property_set_bool(OBJECT(gpio), "gpioV6", true, &error_fatal);
+ object_property_set_bool(OBJECT(gpio), "gpioV7", false, &error_fatal);
+}
+
+static void aspeed_machine_fby35_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Facebook fby35 BMC (Cortex-A7)";
+ mc->reset = fby35_reset;
+ amc->fmc_model = "mx66l1g45g";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC3_ON;
+ amc->i2c_init = fby35_i2c_init;
+ /* FIXME: Replace this macro with something more general */
+ mc->default_ram_size = FUJI_BMC_RAM_SIZE;
+}
+
+#define AST1030_INTERNAL_FLASH_SIZE (1024 * 1024)
+/* Main SYSCLK frequency in Hz (200MHz) */
+#define SYSCLK_FRQ 200000000ULL
+
+static void aspeed_minibmc_machine_init(MachineState *machine)
+{
+ AspeedMachineState *bmc = ASPEED_MACHINE(machine);
+ AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);
+ Clock *sysclk;
+
+ sysclk = clock_new(OBJECT(machine), "SYSCLK");
+ clock_set_hz(sysclk, SYSCLK_FRQ);
+
+ object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name);
+ qdev_connect_clock_in(DEVICE(&bmc->soc), "sysclk", sysclk);
+
+ object_property_set_link(OBJECT(&bmc->soc), "memory",
+ OBJECT(get_system_memory()), &error_abort);
+ connect_serial_hds_to_uarts(bmc);
+ qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
+
+ aspeed_board_init_flashes(&bmc->soc.fmc,
+ bmc->fmc_model ? bmc->fmc_model : amc->fmc_model,
+ amc->num_cs,
+ 0);
+
+ aspeed_board_init_flashes(&bmc->soc.spi[0],
+ bmc->spi_model ? bmc->spi_model : amc->spi_model,
+ amc->num_cs, amc->num_cs);
+
+ aspeed_board_init_flashes(&bmc->soc.spi[1],
+ bmc->spi_model ? bmc->spi_model : amc->spi_model,
+ amc->num_cs, (amc->num_cs * 2));
+
+ if (amc->i2c_init) {
+ amc->i2c_init(bmc);
+ }
+
+ armv7m_load_kernel(ARM_CPU(first_cpu),
+ machine->kernel_filename,
+ AST1030_INTERNAL_FLASH_SIZE);
+}
+
+static void ast1030_evb_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+
+ /* U10 24C08 connects to SDA/SCL Groupt 1 by default */
+ uint8_t *eeprom_buf = g_malloc0(32 * 1024);
+ smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, eeprom_buf);
+
+ /* U11 LM75 connects to SDA/SCL Group 2 by default */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4d);
+}
+
+static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
+ void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Aspeed AST1030 MiniBMC (Cortex-M4)";
+ amc->soc_name = "ast1030-a1";
+ amc->hw_strap1 = 0;
+ amc->hw_strap2 = 0;
+ mc->init = aspeed_minibmc_machine_init;
+ amc->i2c_init = ast1030_evb_i2c_init;
+ mc->default_ram_size = 0;
+ mc->default_cpus = mc->min_cpus = mc->max_cpus = 1;
+ amc->fmc_model = "sst25vf032b";
+ amc->spi_model = "sst25vf032b";
+ amc->num_cs = 2;
+ amc->macs_mask = 0;
+}
+
+static void aspeed_machine_qcom_dc_scm_v1_class_init(ObjectClass *oc,
+ void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Qualcomm DC-SCM V1 BMC (Cortex A7)";
+ amc->soc_name = "ast2600-a3";
+ amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1;
+ amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2;
+ amc->fmc_model = "n25q512a";
+ amc->spi_model = "n25q512a";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON;
+ amc->i2c_init = qcom_dc_scm_bmc_i2c_init;
+ mc->default_ram_size = 1 * GiB;
+ mc->default_cpus = mc->min_cpus = mc->max_cpus =
+ aspeed_soc_num_cpus(amc->soc_name);
+};
+
+static void aspeed_machine_qcom_firework_class_init(ObjectClass *oc,
+ void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Qualcomm DC-SCM V1/Firework BMC (Cortex A7)";
+ amc->soc_name = "ast2600-a3";
+ amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1;
+ amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2;
+ amc->fmc_model = "n25q512a";
+ amc->spi_model = "n25q512a";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON;
+ amc->i2c_init = qcom_dc_scm_firework_i2c_init;
+ mc->default_ram_size = 1 * GiB;
+ mc->default_cpus = mc->min_cpus = mc->max_cpus =
+ aspeed_soc_num_cpus(amc->soc_name);
+};
+
static const TypeInfo aspeed_machine_types[] = {
{
.name = MACHINE_TYPE_NAME("palmetto-bmc"),
.name = MACHINE_TYPE_NAME("romulus-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_romulus_class_init,
- }, {
- .name = MACHINE_TYPE_NAME("swift-bmc"),
- .parent = TYPE_ASPEED_MACHINE,
- .class_init = aspeed_machine_swift_class_init,
}, {
.name = MACHINE_TYPE_NAME("sonorapass-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.name = MACHINE_TYPE_NAME("g220a-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_g220a_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("qcom-dc-scm-v1-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_qcom_dc_scm_v1_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("qcom-firework-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_qcom_firework_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("fp5280g2-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_fp5280g2_class_init,
}, {
.name = MACHINE_TYPE_NAME("quanta-q71l-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.name = MACHINE_TYPE_NAME("rainier-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_rainier_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("fuji-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_fuji_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("bletchley-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_bletchley_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("fby35-bmc"),
+ .parent = MACHINE_TYPE_NAME("ast2600-evb"),
+ .class_init = aspeed_machine_fby35_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("ast1030-evb"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_minibmc_machine_ast1030_evb_class_init,
}, {
.name = TYPE_ASPEED_MACHINE,
.parent = TYPE_MACHINE,
projects / mirror_qemu.git / blobdiff