* THE SOFTWARE.
*/
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "cpu.h"
#include "hw/sysbus.h"
#include "hw/hw.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
#include "hw/devices.h"
#include "hw/boards.h"
-#include "hw/xilinx.h"
-#include "sysemu/blockdev.h"
+#include "sysemu/block-backend.h"
#include "hw/char/serial.h"
#include "exec/address-spaces.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "boot.h"
-#include "pic_cpu.h"
#include "hw/stream.h"
#define NUM_SPI_FLASHES 4
+#define SPI_BASEADDR 0x40a00000
#define MEMORY_BASEADDR 0x50000000
#define FLASH_BASEADDR 0x86000000
#define INTC_BASEADDR 0x81800000
#define AXIENET_BASEADDR 0x82780000
#define AXIDMA_BASEADDR 0x84600000
-static void machine_cpu_reset(MicroBlazeCPU *cpu)
-{
- CPUMBState *env = &cpu->env;
-
- env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
- /* setup pvr to match kernel setting */
- env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
- env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
- env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 << 8);
- env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
- env->pvr.regs[4] = 0xc56b8000;
- env->pvr.regs[5] = 0xc56be000;
-}
+#define AXIDMA_IRQ1 0
+#define AXIDMA_IRQ0 1
+#define TIMER_IRQ 2
+#define AXIENET_IRQ 3
+#define SPI_IRQ 4
+#define UART16550_IRQ 5
static void
-petalogix_ml605_init(QEMUMachineInitArgs *args)
+petalogix_ml605_init(MachineState *machine)
{
- ram_addr_t ram_size = args->ram_size;
- const char *cpu_model = args->cpu_model;
+ ram_addr_t ram_size = machine->ram_size;
MemoryRegion *address_space_mem = get_system_memory();
DeviceState *dev, *dma, *eth0;
Object *ds, *cs;
MicroBlazeCPU *cpu;
SysBusDevice *busdev;
- CPUMBState *env;
DriveInfo *dinfo;
int i;
- hwaddr ddr_base = MEMORY_BASEADDR;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
- qemu_irq irq[32], *cpu_irq;
+ qemu_irq irq[32];
/* init CPUs */
- if (cpu_model == NULL) {
- cpu_model = "microblaze";
- }
- cpu = cpu_mb_init(cpu_model);
- env = &cpu->env;
+ cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
+ object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
+ /* Use FPU but don't use floating point conversion and square
+ * root instructions
+ */
+ object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
+ object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
+ &error_abort);
+ object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
+ object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
- LMB_BRAM_SIZE);
+ LMB_BRAM_SIZE, &error_fatal);
vmstate_register_ram_global(phys_lmb_bram);
memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
- memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size);
+ memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
+ &error_fatal);
vmstate_register_ram_global(phys_ram);
- memory_region_add_subregion(address_space_mem, ddr_base, phys_ram);
+ memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* 5th parameter 2 means bank-width
* 10th paremeter 0 means little-endian */
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_ml605.flash", FLASH_SIZE,
- dinfo ? dinfo->bdrv : NULL, (64 * 1024),
- FLASH_SIZE >> 16,
+ dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
+ (64 * 1024), FLASH_SIZE >> 16,
2, 0x89, 0x18, 0x0000, 0x0, 0);
- cpu_irq = microblaze_pic_init_cpu(env);
- dev = xilinx_intc_create(INTC_BASEADDR, cpu_irq[0], 4);
+ dev = qdev_create(NULL, "xlnx.xps-intc");
+ qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
+ qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
- irq[5], 115200, serial_hds[0], DEVICE_LITTLE_ENDIAN);
+ irq[UART16550_IRQ], 115200, serial_hds[0],
+ DEVICE_LITTLE_ENDIAN);
/* 2 timers at irq 2 @ 100 Mhz. */
- xilinx_timer_create(TIMER_BASEADDR, irq[2], 0, 100 * 1000000);
+ dev = qdev_create(NULL, "xlnx.xps-timer");
+ qdev_prop_set_uint32(dev, "one-timer-only", 0);
+ qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
/* axi ethernet and dma initialization. */
qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(dma),
"axistream-control-connected-target", NULL);
- xilinx_axiethernet_init(eth0, &nd_table[0], STREAM_SLAVE(ds),
- STREAM_SLAVE(cs), 0x82780000, irq[3], 0x1000,
- 0x1000);
+ qdev_set_nic_properties(eth0, &nd_table[0]);
+ qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
+ qdev_prop_set_uint32(eth0, "txmem", 0x1000);
+ object_property_set_link(OBJECT(eth0), OBJECT(ds),
+ "axistream-connected", &error_abort);
+ object_property_set_link(OBJECT(eth0), OBJECT(cs),
+ "axistream-control-connected", &error_abort);
+ qdev_init_nofail(eth0);
+ sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
+ sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);
ds = object_property_get_link(OBJECT(eth0),
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(eth0),
"axistream-control-connected-target", NULL);
- xilinx_axidma_init(dma, STREAM_SLAVE(ds), STREAM_SLAVE(cs), 0x84600000,
- irq[1], irq[0], 100 * 1000000);
+ qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
+ object_property_set_link(OBJECT(dma), OBJECT(ds),
+ "axistream-connected", &error_abort);
+ object_property_set_link(OBJECT(dma), OBJECT(cs),
+ "axistream-control-connected", &error_abort);
+ qdev_init_nofail(dma);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);
{
SSIBus *spi;
qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
- sysbus_mmio_map(busdev, 0, 0x40a00000);
- sysbus_connect_irq(busdev, 0, irq[4]);
+ sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
+ sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);
spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
qemu_irq cs_line;
dev = ssi_create_slave(spi, "n25q128");
- cs_line = qdev_get_gpio_in(dev, 0);
+ cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(busdev, i+1, cs_line);
}
}
- microblaze_load_kernel(cpu, ddr_base, ram_size,
- args->initrd_filename,
+ /* setup PVR to match kernel settings */
+ cpu->env.pvr.regs[4] = 0xc56b8000;
+ cpu->env.pvr.regs[5] = 0xc56be000;
+ cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */
+
+ microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
+ machine->initrd_filename,
BINARY_DEVICE_TREE_FILE,
- machine_cpu_reset);
+ NULL);
}
-static QEMUMachine petalogix_ml605_machine = {
- .name = "petalogix-ml605",
- .desc = "PetaLogix linux refdesign for xilinx ml605 little endian",
- .init = petalogix_ml605_init,
- .is_default = 0,
-};
-
-static void petalogix_ml605_machine_init(void)
+static void petalogix_ml605_machine_init(MachineClass *mc)
{
- qemu_register_machine(&petalogix_ml605_machine);
+ mc->desc = "PetaLogix linux refdesign for xilinx ml605 little endian";
+ mc->init = petalogix_ml605_init;
+ mc->is_default = 0;
}
-machine_init(petalogix_ml605_machine_init);
+DEFINE_MACHINE("petalogix-ml605", petalogix_ml605_machine_init)
projects / mirror_qemu.git / blobdiff