Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

[mirror_qemu.git] / hw / mips / mips_malta.c

diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index f6513a4fd54ce5e309adcd078d28b608f3b630d3..34674514825273d33dd8a1d6083519c9cf97ffa0 100644 (file)
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -23,6 +23,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/units.h"
 #include "qemu-common.h"
 #include "cpu.h"
 #include "hw/hw.h"
@@ -46,7 +47,6 @@
 #include "elf.h"
 #include "hw/timer/mc146818rtc.h"
 #include "hw/timer/i8254.h"
-#include "sysemu/blockdev.h"
 #include "exec/address-spaces.h"
 #include "hw/sysbus.h"             /* SysBusDevice */
 #include "qemu/host-utils.h"
@@ -192,7 +192,7 @@ static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size)
     int i;
 
     /* work in terms of MB */
-    ram_size >>= 20;
+    ram_size /= MiB;
 
     while ((ram_size >= 4) && (nbanks <= 2)) {
         int sz_log2 = MIN(31 - clz32(ram_size), 14);
@@ -844,7 +844,8 @@ static int64_t load_kernel (void)
             /* The kernel allocates the bootmap memory in the low memory after
                the initrd.  It takes at most 128kiB for 2GB RAM and 4kiB
                pages.  */
-            initrd_offset = (loaderparams.ram_low_size - initrd_size - 131072
+            initrd_offset = (loaderparams.ram_low_size - initrd_size
+                             - (128 * KiB)
                              - ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK;
             if (kernel_high >= initrd_offset) {
                 error_report("memory too small for initial ram disk '%s'",
@@ -1022,9 +1023,9 @@ void mips_malta_init(MachineState *machine)
     mips_create_cpu(s, machine->cpu_type, &cbus_irq, &i8259_irq);
 
     /* allocate RAM */
-    if (ram_size > (2048u << 20)) {
-        error_report("Too much memory for this machine: %dMB, maximum 2048MB",
-                     ((unsigned int)ram_size / (1 << 20)));
+    if (ram_size > 2 * GiB) {
+        error_report("Too much memory for this machine: %" PRId64 "MB,"
+                     " maximum 2048MB", ram_size / MiB);
         exit(1);
     }
 
@@ -1035,17 +1036,18 @@ void mips_malta_init(MachineState *machine)
 
     /* alias for pre IO hole access */
     memory_region_init_alias(ram_low_preio, NULL, "mips_malta_low_preio.ram",
-                             ram_high, 0, MIN(ram_size, (256 << 20)));
+                             ram_high, 0, MIN(ram_size, 256 * MiB));
     memory_region_add_subregion(system_memory, 0, ram_low_preio);
 
     /* alias for post IO hole access, if there is enough RAM */
-    if (ram_size > (512 << 20)) {
+    if (ram_size > 512 * MiB) {
         ram_low_postio = g_new(MemoryRegion, 1);
         memory_region_init_alias(ram_low_postio, NULL,
                                  "mips_malta_low_postio.ram",
-                                 ram_high, 512 << 20,
-                                 ram_size - (512 << 20));
-        memory_region_add_subregion(system_memory, 512 << 20, ram_low_postio);
+                                 ram_high, 512 * MiB,
+                                 ram_size - 512 * MiB);
+        memory_region_add_subregion(system_memory, 512 * MiB,
+                                    ram_low_postio);
     }
 
 #ifdef TARGET_WORDS_BIGENDIAN
@@ -1056,13 +1058,8 @@ void mips_malta_init(MachineState *machine)
 
     /* FPGA */
 
-    /* Make sure the second serial port is associated with a device. */
-    if (!serial_hds[2]) {
-        serial_hds[2] = qemu_chr_new("fpga-uart", "null");
-    }
-
     /* The CBUS UART is attached to the MIPS CPU INT2 pin, ie interrupt 4 */
-    malta_fpga_init(system_memory, FPGA_ADDRESS, cbus_irq, serial_hds[2]);
+    malta_fpga_init(system_memory, FPGA_ADDRESS, cbus_irq, serial_hd(2));
 
     /* Load firmware in flash / BIOS. */
     dinfo = drive_get(IF_PFLASH, 0, fl_idx);
@@ -1082,7 +1079,7 @@ void mips_malta_init(MachineState *machine)
     bios = pflash_cfi01_get_memory(fl);
     fl_idx++;
     if (kernel_filename) {
-        ram_low_size = MIN(ram_size, 256 << 20);
+        ram_low_size = MIN(ram_size, 256 * MiB);
         /* For KVM we reserve 1MB of RAM for running bootloader */
         if (kvm_enabled()) {
             ram_low_size -= 0x100000;
@@ -1139,11 +1136,13 @@ void mips_malta_init(MachineState *machine)
            a neat trick which allows bi-endian firmware. */
 #ifndef TARGET_WORDS_BIGENDIAN
         {
-            uint32_t *end, *addr = rom_ptr(FLASH_ADDRESS);
+            uint32_t *end, *addr;
+            const size_t swapsize = MIN(bios_size, 0x3e0000);
+            addr = rom_ptr(FLASH_ADDRESS, swapsize);
             if (!addr) {
                 addr = memory_region_get_ram_ptr(bios);
             }
-            end = (void *)addr + MIN(bios_size, 0x3e0000);
+            end = (void *)addr + swapsize;
             while (addr < end) {
                 bswap32s(addr);
                 addr++;
@@ -1158,7 +1157,7 @@ void mips_malta_init(MachineState *machine)
      * handled by an overlapping region as the resulting ROM code subpage
      * regions are not executable.
      */
-    memory_region_init_ram_nomigrate(bios_copy, NULL, "bios.1fc", BIOS_SIZE,
+    memory_region_init_ram(bios_copy, NULL, "bios.1fc", BIOS_SIZE,
                            &error_fatal);
     if (!rom_copy(memory_region_get_ram_ptr(bios_copy),
                   FLASH_ADDRESS, BIOS_SIZE)) {