* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "hw.h"
#include "audio/audio.h"
#include "boards.h"
#include "arm-misc.h"
#include "devices.h"
+#include "loader.h"
static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
{
#endif
}
-static CPUReadMemoryFunc *static_readfn[] = {
+static CPUReadMemoryFunc * const static_readfn[] = {
static_readb,
static_readh,
static_readw,
};
-static CPUWriteMemoryFunc *static_writefn[] = {
+static CPUWriteMemoryFunc * const static_writefn[] = {
static_write,
static_write,
static_write,
#define PALMTE_MMC2_GPIO 7
#define PALMTE_MMC3_GPIO 11
-static struct mouse_transform_info_s palmte_pointercal = {
+static MouseTransformInfo palmte_pointercal = {
.x = 320,
.y = 320,
.a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
{
- struct uwire_slave_s *tsc;
- AudioState *audio = 0;
+ uWireSlave *tsc;
-#ifdef HAS_AUDIO
- audio = AUD_init();
-#endif
-
- tsc = tsc2102_init(omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO],
- audio);
+ tsc = tsc2102_init(omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO]);
omap_uwire_attach(cpu->microwire, tsc, 0);
omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
.board_id = 0x331,
};
-static void palmte_init(ram_addr_t ram_size, int vga_ram_size,
+static void palmte_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
int rom_size, rom_loaded = 0;
DisplayState *ds = get_displaystate();
- if (ram_size < flash_size + sdram_size + OMAP15XX_SRAM_SIZE) {
- fprintf(stderr, "This architecture uses %i bytes of memory\n",
- flash_size + sdram_size + OMAP15XX_SRAM_SIZE);
- exit(1);
- }
-
cpu = omap310_mpu_init(sdram_size, cpu_model);
/* External Flash (EMIFS) */
cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,
(phys_flash = qemu_ram_alloc(flash_size)) | IO_MEM_ROM);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs0val);
+ io = cpu_register_io_memory(static_readfn, static_writefn, &cs0val);
cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,
OMAP_CS0_SIZE - flash_size, io);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs1val);
+ io = cpu_register_io_memory(static_readfn, static_writefn, &cs1val);
cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs2val);
+ io = cpu_register_io_memory(static_readfn, static_writefn, &cs2val);
cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs3val);
+ io = cpu_register_io_memory(static_readfn, static_writefn, &cs3val);
cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);
palmte_microwire_setup(cpu);
/* Setup initial (reset) machine state */
if (nb_option_roms) {
rom_size = get_image_size(option_rom[0]);
- if (rom_size > flash_size)
+ if (rom_size > flash_size) {
fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
__FUNCTION__, rom_size, flash_size);
- else if (rom_size > 0 && load_image(option_rom[0],
- phys_ram_base + phys_flash) > 0) {
+ rom_size = 0;
+ }
+ if (rom_size > 0) {
+ rom_size = load_image_targphys(option_rom[0], OMAP_CS0_BASE,
+ flash_size);
rom_loaded = 1;
cpu->env->regs[15] = 0x00000000;
- } else
+ }
+ if (rom_size < 0) {
fprintf(stderr, "%s: error loading '%s'\n",
__FUNCTION__, option_rom[0]);
+ }
}
if (!rom_loaded && !kernel_filename) {
/* FIXME: We shouldn't really be doing this here. The LCD controller
will set the size once configured, so this just sets an initial
size until the guest activates the display. */
- ds->surface = qemu_resize_displaysurface(ds->surface, 320, 320, 32, 4 * 320);
+ ds->surface = qemu_resize_displaysurface(ds, 320, 320);
dpy_resize(ds);
}
-QEMUMachine palmte_machine = {
+static QEMUMachine palmte_machine = {
.name = "cheetah",
.desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
.init = palmte_init,
- .ram_require = (0x02000000 + 0x00800000 + OMAP15XX_SRAM_SIZE) |
- RAMSIZE_FIXED,
};
+
+static void palmte_machine_init(void)
+{
+ qemu_register_machine(&palmte_machine);
+}
+
+machine_init(palmte_machine_init);