-/*
+/*
* ARM RealView Baseboard System emulation.
*
* Copyright (c) 2006-2007 CodeSourcery.
* This code is licenced under the GPL.
*/
-#include "vl.h"
-#include "arm_pic.h"
+#include "sysbus.h"
+#include "arm-misc.h"
+#include "primecell.h"
+#include "devices.h"
+#include "pci.h"
+#include "net.h"
+#include "sysemu.h"
+#include "boards.h"
/* Board init. */
-static void realview_init(int ram_size, int vga_ram_size, int boot_device,
- DisplayState *ds, const char **fd_filename, int snapshot,
+static struct arm_boot_info realview_binfo = {
+ .loader_start = 0x0,
+ .smp_loader_start = 0x80000000,
+ .board_id = 0x33b,
+};
+
+static void realview_init(ram_addr_t ram_size,
+ const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env;
- qemu_irq *pic;
- void *scsi_hba;
+ ram_addr_t ram_offset;
+ DeviceState *dev;
+ qemu_irq *irqp;
+ qemu_irq pic[64];
PCIBus *pci_bus;
NICInfo *nd;
int n;
int done_smc = 0;
+ qemu_irq cpu_irq[4];
+ int ncpu;
- env = cpu_init();
if (!cpu_model)
cpu_model = "arm926";
- cpu_arm_set_model(env, cpu_model);
- /* ??? RAM shoud repeat to fill physical memory space. */
+ /* FIXME: obey smp_cpus. */
+ if (strcmp(cpu_model, "arm11mpcore") == 0) {
+ ncpu = 4;
+ } else {
+ ncpu = 1;
+ }
+
+ for (n = 0; n < ncpu; n++) {
+ env = cpu_init(cpu_model);
+ if (!env) {
+ fprintf(stderr, "Unable to find CPU definition\n");
+ exit(1);
+ }
+ irqp = arm_pic_init_cpu(env);
+ cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
+ if (n > 0) {
+ /* Set entry point for secondary CPUs. This assumes we're using
+ the init code from arm_boot.c. Real hardware resets all CPUs
+ the same. */
+ env->regs[15] = 0x80000000;
+ }
+ }
+
+ ram_offset = qemu_ram_alloc(ram_size);
+ /* ??? RAM should repeat to fill physical memory space. */
/* SDRAM at address zero. */
- cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
+ cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
arm_sysctl_init(0x10000000, 0xc1400400);
- pic = arm_pic_init_cpu(env);
- /* ??? The documentation says GIC1 is nFIQ and either GIC2 or GIC3
- is nIRQ (there are inconsistencies). However Linux 2.6.17 expects
- GIC1 to be nIRQ and ignores all the others, so do that for now. */
- pic = arm_gic_init(0x10040000, pic[ARM_PIC_CPU_IRQ]);
- pl050_init(0x10006000, pic[20], 0);
- pl050_init(0x10007000, pic[21], 1);
-
- pl011_init(0x10009000, pic[12], serial_hds[0]);
- pl011_init(0x1000a000, pic[13], serial_hds[1]);
- pl011_init(0x1000b000, pic[14], serial_hds[2]);
- pl011_init(0x1000c000, pic[15], serial_hds[3]);
+
+ if (ncpu == 1) {
+ /* ??? The documentation says GIC1 is nFIQ and either GIC2 or GIC3
+ is nIRQ (there are inconsistencies). However Linux 2.6.17 expects
+ GIC1 to be nIRQ and ignores all the others, so do that for now. */
+ dev = sysbus_create_simple("realview_gic", 0x10040000, cpu_irq[0]);
+ } else {
+ dev = sysbus_create_varargs("realview_mpcore", -1,
+ cpu_irq[0], cpu_irq[1], cpu_irq[2],
+ cpu_irq[3], NULL);
+ }
+ for (n = 0; n < 64; n++) {
+ pic[n] = qdev_get_irq_sink(dev, n);
+ }
+
+ sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
+ sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
+
+ sysbus_create_simple("pl011", 0x10009000, pic[12]);
+ sysbus_create_simple("pl011", 0x1000a000, pic[13]);
+ sysbus_create_simple("pl011", 0x1000b000, pic[14]);
+ sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
- pl080_init(0x10030000, pic[24], 2);
+ sysbus_create_simple("pl081", 0x10030000, pic[24]);
- sp804_init(0x10011000, pic[4]);
- sp804_init(0x10012000, pic[5]);
+ sysbus_create_simple("sp804", 0x10011000, pic[4]);
+ sysbus_create_simple("sp804", 0x10012000, pic[5]);
- pl110_init(ds, 0x10020000, pic[23], 1);
+ sysbus_create_simple("pl110_versatile", 0x10020000, pic[23]);
- pl181_init(0x10005000, sd_bdrv, pic[17], pic[18]);
+ sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
- pl031_init(0x10017000, pic[10]);
+ sysbus_create_simple("pl031", 0x10017000, pic[10]);
- pci_bus = pci_vpb_init(pic, 48, 1);
+ dev = sysbus_create_varargs("realview_pci", 0x60000000,
+ pic[48], pic[49], pic[50], pic[51], NULL);
+ pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, 3, -1);
}
- scsi_hba = lsi_scsi_init(pci_bus, -1);
- for (n = 0; n < MAX_DISKS; n++) {
- if (bs_table[n]) {
- lsi_scsi_attach(scsi_hba, bs_table[n], n);
- }
+ n = drive_get_max_bus(IF_SCSI);
+ while (n >= 0) {
+ pci_create_simple(pci_bus, -1, "lsi53c895a");
+ n--;
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
- if (!nd->model)
- nd->model = done_smc ? "rtl8139" : "smc91c111";
- if (strcmp(nd->model, "smc91c111") == 0) {
+
+ if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) {
smc91c111_init(nd, 0x4e000000, pic[28]);
+ done_smc = 1;
} else {
- pci_nic_init(pci_bus, nd, -1);
+ pci_nic_init(pci_bus, nd, -1, "rtl8139");
}
}
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
- /* 0x10040000 GIC1 (FIQ1). */
- /* 0x10050000 GIC2 (IRQ1). */
- /* 0x10060000 GIC3 (FIQ2). */
- /* 0x10070000 GIC4 (IRQ2). */
+ /* 0x10040000 GIC1. */
+ /* 0x10050000 GIC2. */
+ /* 0x10060000 GIC3. */
+ /* 0x10070000 GIC4. */
/* 0x10080000 SMC. */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
- arm_load_kernel(env, ram_size, kernel_filename, kernel_cmdline,
- initrd_filename, 0x33b, 0x0);
+ /* ??? Hack to map an additional page of ram for the secondary CPU
+ startup code. I guess this works on real hardware because the
+ BootROM happens to be in ROM/flash or in memory that isn't clobbered
+ until after Linux boots the secondary CPUs. */
+ ram_offset = qemu_ram_alloc(0x1000);
+ cpu_register_physical_memory(0x80000000, 0x1000, ram_offset | IO_MEM_RAM);
+
+ realview_binfo.ram_size = ram_size;
+ realview_binfo.kernel_filename = kernel_filename;
+ realview_binfo.kernel_cmdline = kernel_cmdline;
+ realview_binfo.initrd_filename = initrd_filename;
+ realview_binfo.nb_cpus = ncpu;
+ arm_load_kernel(first_cpu, &realview_binfo);
}
QEMUMachine realview_machine = {
- "realview",
- "ARM RealView Emulation Baseboard (ARM926EJ-S)",
- realview_init
+ .name = "realview",
+ .desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)",
+ .init = realview_init,
+ .use_scsi = 1,
};
+
+static void realview_machine_init(void)
+{
+ qemu_register_machine(&realview_machine);
+}
+
+machine_init(realview_machine_init);
projects / mirror_qemu.git / blobdiff