-# See docs/devel/tracing.txt for syntax documentation.
+# See docs/devel/tracing.rst for syntax documentation.
# scsi-bus.c
scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
scsi_req_data_canceled(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_bus_drained_begin(void *bus, void *sdev) "bus %p sdev %p"
+scsi_bus_drained_end(void *bus, void *sdev) "bus %p sdev %p"
scsi_req_continue(int target, int lun, int tag) "target %d lun %d tag %d"
scsi_req_continue_canceled(int target, int lun, int tag) "target %d lun %d tag %d"
scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer) "target %d lun %d tag %d command %d dir %d length %d"
mptsas_mmio_unhandled_read(void *dev, uint32_t addr) "dev %p addr 0x%08x"
mptsas_mmio_unhandled_write(void *dev, uint32_t addr, uint32_t val) "dev %p addr 0x%08x value 0x%x"
mptsas_mmio_write(void *dev, uint32_t addr, uint32_t val) "dev %p addr 0x%08x value 0x%x"
-mptsas_process_message(void *dev, int msg, uint32_t ctx) "dev %p cmd %d context 0x%08x\n"
+mptsas_process_message(void *dev, int msg, uint32_t ctx) "dev %p cmd %d context 0x%08x"
mptsas_process_scsi_io_request(void *dev, int bus, int target, int lun, uint64_t len) "dev %p dev %d:%d:%d length %"PRIu64""
mptsas_reset(void *dev) "dev %p "
mptsas_scsi_overflow(void *dev, uint32_t ctx, uint64_t req, uint64_t found) "dev %p context 0x%08x: %"PRIu64"/%"PRIu64""
# megasas.c
megasas_init_firmware(uint64_t pa) "pa 0x%" PRIx64 " "
-megasas_init_queue(uint64_t queue_pa, int queue_len, uint64_t head, uint64_t tail, uint32_t flags) "queue at 0x%" PRIx64 " len %d head 0x%" PRIx64 " tail 0x%" PRIx64 " flags 0x%x"
+megasas_init_queue(uint64_t queue_pa, int queue_len, uint32_t head, uint32_t tail, uint32_t flags) "queue at 0x%" PRIx64 " len %d head 0x%" PRIx32 " tail 0x%" PRIx32 " flags 0x%x"
megasas_initq_map_failed(int frame) "scmd %d: failed to map queue"
megasas_initq_mapped(uint64_t pa) "queue already mapped at 0x%" PRIx64
megasas_initq_mismatch(int queue_len, int fw_cmds) "queue size %d max fw cmds %d"
megasas_qf_mapped(unsigned int index) "skip mapped frame 0x%x"
megasas_qf_new(unsigned int index, uint64_t frame) "frame 0x%x addr 0x%" PRIx64
megasas_qf_busy(unsigned long pa) "all frames busy for frame 0x%lx"
-megasas_qf_enqueue(unsigned int index, unsigned int count, uint64_t context, unsigned int head, unsigned int tail, int busy) "frame 0x%x count %d context 0x%" PRIx64 " head 0x%x tail 0x%x busy %d"
-megasas_qf_update(unsigned int head, unsigned int tail, unsigned int busy) "head 0x%x tail 0x%x busy %d"
+megasas_qf_enqueue(unsigned int index, unsigned int count, uint64_t context, uint32_t head, uint32_t tail, unsigned int busy) "frame 0x%x count %d context 0x%" PRIx64 " head 0x%" PRIx32 " tail 0x%" PRIx32 " busy %u"
+megasas_qf_update(uint32_t head, uint32_t tail, unsigned int busy) "head 0x%" PRIx32 " tail 0x%" PRIx32 " busy %u"
megasas_qf_map_failed(int cmd, unsigned long frame) "scmd %d: frame %lu"
megasas_qf_complete_noirq(uint64_t context) "context 0x%" PRIx64 " "
-megasas_qf_complete(uint64_t context, unsigned int head, unsigned int tail, int busy) "context 0x%" PRIx64 " head 0x%x tail 0x%x busy %d"
+megasas_qf_complete(uint64_t context, uint32_t head, uint32_t tail, int busy) "context 0x%" PRIx64 " head 0x%" PRIx32 " tail 0x%" PRIx32 " busy %u"
megasas_frame_busy(uint64_t addr) "frame 0x%" PRIx64 " busy"
megasas_unhandled_frame_cmd(int cmd, uint8_t frame_cmd) "scmd %d: MFI cmd 0x%x"
megasas_handle_scsi(const char *frame, int bus, int dev, int lun, void *sdev, unsigned long size) "%s dev %x/%x/%x sdev %p xfer %lu"
esp_error_invalid_write(uint32_t val, uint32_t addr) "invalid write of 0x%02x at [0x%x]"
esp_raise_irq(void) "Raise IRQ"
esp_lower_irq(void) "Lower IRQ"
+esp_raise_drq(void) "Raise DREQ"
+esp_lower_drq(void) "Lower DREQ"
esp_dma_enable(void) "Raise enable"
esp_dma_disable(void) "Lower enable"
+esp_pdma_read(int size) "pDMA read %u bytes"
+esp_pdma_write(int size) "pDMA write %u bytes"
esp_get_cmd(uint32_t dmalen, int target) "len %d target %d"
-esp_do_busid_cmd(uint8_t busid) "busid 0x%x"
+esp_do_command_phase(uint8_t busid) "busid 0x%x"
+esp_do_identify(uint8_t byte) "0x%x"
esp_handle_satn_stop(uint32_t cmdlen) "cmdlen %d"
esp_write_response(uint32_t status) "Transfer status (status=%d)"
esp_do_dma(uint32_t cmdlen, uint32_t len) "command len %d + %d"
esp_mem_writeb_cmd_selatns(uint32_t val) "Select with ATN & stop (0x%2.2x)"
esp_mem_writeb_cmd_ensel(uint32_t val) "Enable selection (0x%2.2x)"
esp_mem_writeb_cmd_dissel(uint32_t val) "Disable selection (0x%2.2x)"
+esp_mem_writeb_cmd_ti(uint32_t val) "Transfer Information (0x%2.2x)"
+esp_set_phase(const char *phase) "setting bus phase to %s"
# esp-pci.c
esp_pci_error_invalid_dma_direction(void) "invalid DMA transfer direction"
spapr_vscsi_save_request(uint32_t qtag, unsigned desc, unsigned offset) "saving tag=%"PRIu32", current desc#%u, offset=0x%x"
spapr_vscsi_load_request(uint32_t qtag, unsigned desc, unsigned offset) "restoring tag=%"PRIu32", current desc#%u, offset=0x%x"
spapr_vscsi_process_login(void) "Got login, sending response !"
+spapr_vscsi_process_tsk_mgmt(uint8_t func) "tsk_mgmt_func 0x%02x"
spapr_vscsi_queue_cmd_no_drive(uint64_t lun) "Command for lun 0x%08" PRIx64 " with no drive"
spapr_vscsi_queue_cmd(uint32_t qtag, unsigned cdb, const char *cmd, int lun, int ret) "Queued command tag 0x%"PRIx32" CMD 0x%x=%s LUN %d ret: %d"
spapr_vscsi_do_crq(unsigned c0, unsigned c1) "crq: %02x %02x ..."
lsi_bad_selection(uint32_t id) "Selected absent target %"PRIu32
lsi_do_dma_unavailable(void) "DMA no data available"
lsi_do_dma(uint64_t addr, int len) "DMA addr=0x%"PRIx64" len=%d"
-lsi_queue_command(uint32_t tag) "Queueing tag=0x%"PRId32
+lsi_queue_command(uint32_t tag) "Queueing tag=0x%"PRIx32
lsi_add_msg_byte_error(void) "MSG IN data too long"
lsi_add_msg_byte(uint8_t data) "MSG IN 0x%02x"
lsi_reselect(int id) "Reselected target %d"
lsi_do_msgout_extended(uint8_t msg, uint8_t len) "Extended message 0x%x (len %d)"
lsi_do_msgout_ignored(const char *msg) "%s (ignored)"
lsi_do_msgout_simplequeue(uint8_t select_tag) "SIMPLE queue tag=0x%x"
-lsi_do_msgout_abort(uint32_t tag) "MSG: ABORT TAG tag=0x%"PRId32
+lsi_do_msgout_abort(uint32_t tag) "MSG: ABORT TAG tag=0x%"PRIx32
lsi_do_msgout_clearqueue(uint32_t tag) "MSG: CLEAR QUEUE tag=0x%"PRIx32
lsi_do_msgout_busdevicereset(uint32_t tag) "MSG: BUS DEVICE RESET tag=0x%"PRIx32
lsi_do_msgout_select(int id) "Select LUN %d"
lsi_awoken(void) "Woken by SIGP"
lsi_reg_read(const char *name, int offset, uint8_t ret) "Read reg %s 0x%x = 0x%02x"
lsi_reg_write(const char *name, int offset, uint8_t val) "Write reg %s 0x%x = 0x%02x"
+lsi_scripts_timer_triggered(void) "SCRIPTS timer triggered"
+lsi_scripts_timer_start(void) "SCRIPTS timer started"
+
+# virtio-scsi.c
+virtio_scsi_cmd_req(int lun, uint32_t tag, uint8_t cmd) "virtio_scsi_cmd_req lun=%u tag=0x%x cmd=0x%x"
+virtio_scsi_cmd_resp(int lun, uint32_t tag, int response, uint8_t status) "virtio_scsi_cmd_resp lun=%u tag=0x%x response=%d status=0x%x"
+virtio_scsi_tmf_req(int lun, uint32_t tag, int subtype) "virtio_scsi_tmf_req lun=%u tag=0x%x subtype=%d"
+virtio_scsi_tmf_resp(int lun, uint32_t tag, int response) "virtio_scsi_tmf_resp lun=%u tag=0x%x response=%d"
+virtio_scsi_an_req(int lun, uint32_t event_requested) "virtio_scsi_an_req lun=%u event_requested=0x%x"
+virtio_scsi_an_resp(int lun, int response) "virtio_scsi_an_resp lun=%u response=%d"
+virtio_scsi_event(int lun, int event, int reason) "virtio_scsi_event lun=%u event=%d reason=%d"
# scsi-disk.c
scsi_disk_check_condition(uint32_t tag, uint8_t key, uint8_t asc, uint8_t ascq) "Command complete tag=0x%x sense=%d/%d/%d"
scsi_disk_emulate_command_VERIFY(int bytchk) "Verify (bytchk %d)"
scsi_disk_emulate_command_WRITE_SAME(int cmd, size_t xfer) "WRITE SAME %d (len %zd)"
scsi_disk_emulate_command_UNKNOWN(int cmd, const char *name) "Unknown SCSI command (0x%2.2x=%s)"
+scsi_disk_emulate_command_FORMAT_UNIT(size_t xfer) "Format Unit (len %zu)"
scsi_disk_dma_command_READ(uint64_t lba, uint32_t len) "Read (sector %" PRId64 ", count %u)"
scsi_disk_dma_command_WRITE(const char *cmd, uint64_t lba, int len) "Write %s(sector %" PRId64 ", count %u)"
scsi_disk_new_request(uint32_t lun, uint32_t tag, const char *line) "Command: lun=%d tag=0x%x data=%s"
+scsi_disk_aio_sgio_command(uint32_t tag, uint8_t cmd, uint64_t lba, int len, uint32_t timeout) "disk aio sgio: tag=0x%x cmd=0x%x (sector %" PRId64 ", count %d) timeout=%u"
+scsi_disk_mode_select_page_truncated(int page, int len, int page_len) "page %d expected length %d but received length %d"
+scsi_disk_mode_select_set_blocksize(int blocksize) "set block size to %d"
# scsi-generic.c
scsi_generic_command_complete_noio(void *req, uint32_t tag, int statuc) "Command complete %p tag=0x%x status=%d"
scsi_generic_send_command(const char *line) "Command: data=%s"
scsi_generic_realize_type(int type) "device type %d"
scsi_generic_realize_blocksize(int blocksize) "block size %d"
+scsi_generic_aio_sgio_command(uint32_t tag, uint8_t cmd, uint32_t timeout) "generic aio sgio: tag=0x%x cmd=0x%x timeout=%u"
+scsi_generic_ioctl_sgio_command(uint8_t cmd, uint32_t timeout) "generic ioctl sgio: cmd=0x%x timeout=%u"
+scsi_generic_ioctl_sgio_done(uint8_t cmd, int ret, uint8_t status, uint8_t host_status) "generic ioctl sgio: cmd=0x%x ret=%d status=0x%x host_status=0x%x"
projects / mirror_qemu.git / blobdiff