#ifndef _QEMU_VIRTIO_NET_H
#define _QEMU_VIRTIO_NET_H
-#include "virtio.h"
-#include "net.h"
-#include "pci.h"
+#include "hw/virtio.h"
+#include "hw/pci/pci.h"
#define ETH_ALEN 6
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
+#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
+ * Steering */
+
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
#define TX_TIMER_INTERVAL 150000 /* 150 us */
+/* Limit the number of packets that can be sent via a single flush
+ * of the TX queue. This gives us a guaranteed exit condition and
+ * ensures fairness in the io path. 256 conveniently matches the
+ * length of the TX queue and shows a good balance of performance
+ * and latency. */
+#define TX_BURST 256
+
+typedef struct virtio_net_conf
+{
+ uint32_t txtimer;
+ int32_t txburst;
+ char *tx;
+} virtio_net_conf;
+
/* Maximum packet size we can receive from tap device: header + 64k */
#define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
struct virtio_net_config
{
- /* The config defining mac address (6 bytes) */
- uint8_t mac[6];
+ /* The config defining mac address ($ETH_ALEN bytes) */
+ uint8_t mac[ETH_ALEN];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
uint16_t status;
-} __attribute__((packed));
-
-/* This is the first element of the scatter-gather list. If you don't
- * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr
-{
-#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
- uint8_t flags;
-#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
-#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
-#define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
-#define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
-#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
- uint8_t gso_type;
- uint16_t hdr_len;
- uint16_t gso_size;
- uint16_t csum_start;
- uint16_t csum_offset;
-};
-
-/* This is the version of the header to use when the MRG_RXBUF
- * feature has been negotiated. */
-struct virtio_net_hdr_mrg_rxbuf
-{
- struct virtio_net_hdr hdr;
- uint16_t num_buffers; /* Number of merged rx buffers */
-};
+ /* Max virtqueue pairs supported by the device */
+ uint16_t max_virtqueue_pairs;
+} QEMU_PACKED;
/*
* Control virtqueue data structures
* 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
* Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
-#define VIRTIO_NET_CTRL_RX_MODE 0
- #define VIRTIO_NET_CTRL_RX_MODE_PROMISC 0
- #define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI 1
- #define VIRTIO_NET_CTRL_RX_MODE_ALLUNI 2
- #define VIRTIO_NET_CTRL_RX_MODE_NOMULTI 3
- #define VIRTIO_NET_CTRL_RX_MODE_NOUNI 4
- #define VIRTIO_NET_CTRL_RX_MODE_NOBCAST 5
+#define VIRTIO_NET_CTRL_RX 0
+ #define VIRTIO_NET_CTRL_RX_PROMISC 0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST 5
/*
- * Control the MAC filter table.
+ * Control the MAC
*
* The MAC filter table is managed by the hypervisor, the guest should
* assume the size is infinite. Filtering should be considered
* first sg list contains unicast addresses, the second is for multicast.
* This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
* is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
*/
struct virtio_net_ctrl_mac {
uint32_t entries;
uint8_t macs[][ETH_ALEN];
};
+
+typedef struct VirtIONetQueue {
+ VirtQueue *rx_vq;
+ VirtQueue *tx_vq;
+ QEMUTimer *tx_timer;
+ QEMUBH *tx_bh;
+ int tx_waiting;
+ struct {
+ VirtQueueElement elem;
+ ssize_t len;
+ } async_tx;
+ struct VirtIONet *n;
+} VirtIONetQueue;
+
+typedef struct VirtIONet {
+ VirtIODevice vdev;
+ uint8_t mac[ETH_ALEN];
+ uint16_t status;
+ VirtIONetQueue *vqs;
+ VirtQueue *ctrl_vq;
+ NICState *nic;
+ uint32_t tx_timeout;
+ int32_t tx_burst;
+ uint32_t has_vnet_hdr;
+ size_t host_hdr_len;
+ size_t guest_hdr_len;
+ uint8_t has_ufo;
+ int mergeable_rx_bufs;
+ uint8_t promisc;
+ uint8_t allmulti;
+ uint8_t alluni;
+ uint8_t nomulti;
+ uint8_t nouni;
+ uint8_t nobcast;
+ uint8_t vhost_started;
+ struct {
+ int in_use;
+ int first_multi;
+ uint8_t multi_overflow;
+ uint8_t uni_overflow;
+ uint8_t *macs;
+ } mac_table;
+ uint32_t *vlans;
+ DeviceState *qdev;
+ int multiqueue;
+ uint16_t max_queues;
+ uint16_t curr_queues;
+ size_t config_size;
+} VirtIONet;
+
#define VIRTIO_NET_CTRL_MAC 1
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
/*
* Control VLAN filtering
#define VIRTIO_NET_CTRL_VLAN_ADD 0
#define VIRTIO_NET_CTRL_VLAN_DEL 1
+/*
+ * Control Multiqueue
+ *
+ * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
+ * enables multiqueue, specifying the number of the transmit and
+ * receive queues that will be used. After the command is consumed and acked by
+ * the device, the device will not steer new packets on receive virtqueues
+ * other than specified nor read from transmit virtqueues other than specified.
+ * Accordingly, driver should not transmit new packets on virtqueues other than
+ * specified.
+ */
+struct virtio_net_ctrl_mq {
+ uint16_t virtqueue_pairs;
+};
+
+#define VIRTIO_NET_CTRL_MQ 4
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
+
+#define DEFINE_VIRTIO_NET_FEATURES(_state, _field) \
+ DEFINE_VIRTIO_COMMON_FEATURES(_state, _field), \
+ DEFINE_PROP_BIT("csum", _state, _field, VIRTIO_NET_F_CSUM, true), \
+ DEFINE_PROP_BIT("guest_csum", _state, _field, VIRTIO_NET_F_GUEST_CSUM, true), \
+ DEFINE_PROP_BIT("gso", _state, _field, VIRTIO_NET_F_GSO, true), \
+ DEFINE_PROP_BIT("guest_tso4", _state, _field, VIRTIO_NET_F_GUEST_TSO4, true), \
+ DEFINE_PROP_BIT("guest_tso6", _state, _field, VIRTIO_NET_F_GUEST_TSO6, true), \
+ DEFINE_PROP_BIT("guest_ecn", _state, _field, VIRTIO_NET_F_GUEST_ECN, true), \
+ DEFINE_PROP_BIT("guest_ufo", _state, _field, VIRTIO_NET_F_GUEST_UFO, true), \
+ DEFINE_PROP_BIT("host_tso4", _state, _field, VIRTIO_NET_F_HOST_TSO4, true), \
+ DEFINE_PROP_BIT("host_tso6", _state, _field, VIRTIO_NET_F_HOST_TSO6, true), \
+ DEFINE_PROP_BIT("host_ecn", _state, _field, VIRTIO_NET_F_HOST_ECN, true), \
+ DEFINE_PROP_BIT("host_ufo", _state, _field, VIRTIO_NET_F_HOST_UFO, true), \
+ DEFINE_PROP_BIT("mrg_rxbuf", _state, _field, VIRTIO_NET_F_MRG_RXBUF, true), \
+ DEFINE_PROP_BIT("status", _state, _field, VIRTIO_NET_F_STATUS, true), \
+ DEFINE_PROP_BIT("ctrl_vq", _state, _field, VIRTIO_NET_F_CTRL_VQ, true), \
+ DEFINE_PROP_BIT("ctrl_rx", _state, _field, VIRTIO_NET_F_CTRL_RX, true), \
+ DEFINE_PROP_BIT("ctrl_vlan", _state, _field, VIRTIO_NET_F_CTRL_VLAN, true), \
+ DEFINE_PROP_BIT("ctrl_rx_extra", _state, _field, VIRTIO_NET_F_CTRL_RX_EXTRA, true), \
+ DEFINE_PROP_BIT("ctrl_mac_addr", _state, _field, VIRTIO_NET_F_CTRL_MAC_ADDR, true), \
+ DEFINE_PROP_BIT("mq", _state, _field, VIRTIO_NET_F_MQ, false)
+
#endif
projects / mirror_qemu.git / blobdiff