* Subsystem-level @suspend() is executed for all devices after invoking
* subsystem-level @prepare() for all of them.
*
+ * @suspend_late: Continue operations started by @suspend(). For a number of
+ * devices @suspend_late() may point to the same callback routine as the
+ * runtime suspend callback.
+ *
* @resume: Executed after waking the system up from a sleep state in which the
* contents of main memory were preserved. The exact action to perform
* depends on the device's subsystem, but generally the driver is expected
* Subsystem-level @resume() is executed for all devices after invoking
* subsystem-level @resume_noirq() for all of them.
*
+ * @resume_early: Prepare to execute @resume(). For a number of devices
+ * @resume_early() may point to the same callback routine as the runtime
+ * resume callback.
+ *
* @freeze: Hibernation-specific, executed before creating a hibernation image.
* Analogous to @suspend(), but it should not enable the device to signal
* wakeup events or change its power state. The majority of subsystems
* Subsystem-level @freeze() is executed for all devices after invoking
* subsystem-level @prepare() for all of them.
*
+ * @freeze_late: Continue operations started by @freeze(). Analogous to
+ * @suspend_late(), but it should not enable the device to signal wakeup
+ * events or change its power state.
+ *
* @thaw: Hibernation-specific, executed after creating a hibernation image OR
* if the creation of an image has failed. Also executed after a failing
* attempt to restore the contents of main memory from such an image.
* subsystem-level @thaw_noirq() for all of them. It also may be executed
* directly after @freeze() in case of a transition error.
*
+ * @thaw_early: Prepare to execute @thaw(). Undo the changes made by the
+ * preceding @freeze_late().
+ *
* @poweroff: Hibernation-specific, executed after saving a hibernation image.
* Analogous to @suspend(), but it need not save the device's settings in
* memory.
* Subsystem-level @poweroff() is executed for all devices after invoking
* subsystem-level @prepare() for all of them.
*
+ * @poweroff_late: Continue operations started by @poweroff(). Analogous to
+ * @suspend_late(), but it need not save the device's settings in memory.
+ *
* @restore: Hibernation-specific, executed after restoring the contents of main
* memory from a hibernation image, analogous to @resume().
*
+ * @restore_early: Prepare to execute @restore(), analogous to @resume_early().
+ *
* @suspend_noirq: Complete the actions started by @suspend(). Carry out any
* additional operations required for suspending the device that might be
* racing with its driver's interrupt handler, which is guaranteed not to
* @suspend_noirq() has returned successfully. If the device can generate
* system wakeup signals and is enabled to wake up the system, it should be
* configured to do so at that time. However, depending on the platform
- * and device's subsystem, @suspend() may be allowed to put the device into
- * the low-power state and configure it to generate wakeup signals, in
- * which case it generally is not necessary to define @suspend_noirq().
+ * and device's subsystem, @suspend() or @suspend_late() may be allowed to
+ * put the device into the low-power state and configure it to generate
+ * wakeup signals, in which case it generally is not necessary to define
+ * @suspend_noirq().
*
* @resume_noirq: Prepare for the execution of @resume() by carrying out any
* operations required for resuming the device that might be racing with
* additional operations required for freezing the device that might be
* racing with its driver's interrupt handler, which is guaranteed not to
* run while @freeze_noirq() is being executed.
- * The power state of the device should not be changed by either @freeze()
- * or @freeze_noirq() and it should not be configured to signal system
- * wakeup by any of these callbacks.
+ * The power state of the device should not be changed by either @freeze(),
+ * or @freeze_late(), or @freeze_noirq() and it should not be configured to
+ * signal system wakeup by any of these callbacks.
*
* @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
* operations required for thawing the device that might be racing with its
int (*thaw)(struct device *dev);
int (*poweroff)(struct device *dev);
int (*restore)(struct device *dev);
+ int (*suspend_late)(struct device *dev);
+ int (*resume_early)(struct device *dev);
+ int (*freeze_late)(struct device *dev);
+ int (*thaw_early)(struct device *dev);
+ int (*poweroff_late)(struct device *dev);
+ int (*restore_early)(struct device *dev);
int (*suspend_noirq)(struct device *dev);
int (*resume_noirq)(struct device *dev);
int (*freeze_noirq)(struct device *dev);
/*
* Use this for defining a set of PM operations to be used in all situations
* (sustem suspend, hibernation or runtime PM).
+ * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
+ * be different from the corresponding runtime PM callbacks, .runtime_suspend(),
+ * and .runtime_resume(), because .runtime_suspend() always works on an already
+ * quiescent device, while .suspend() should assume that the device may be doing
+ * something when it is called (it should ensure that the device will be
+ * quiescent after it has returned). Therefore it's better to point the "late"
+ * suspend and "early" resume callback pointers, .suspend_late() and
+ * .resume_early(), to the same routines as .runtime_suspend() and
+ * .runtime_resume(), respectively (and analogously for hibernation).
*/
#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
const struct dev_pm_ops name = { \
unsigned long accounting_timestamp;
ktime_t suspend_time;
s64 max_time_suspended_ns;
+ struct dev_pm_qos_request *pq_req;
#endif
struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
struct pm_qos_constraints *constraints;
#ifdef CONFIG_PM_SLEEP
extern void device_pm_lock(void);
-extern void dpm_resume_noirq(pm_message_t state);
+extern void dpm_resume_start(pm_message_t state);
extern void dpm_resume_end(pm_message_t state);
extern void dpm_resume(pm_message_t state);
extern void dpm_complete(pm_message_t state);
extern void device_pm_unlock(void);
-extern int dpm_suspend_noirq(pm_message_t state);
+extern int dpm_suspend_end(pm_message_t state);
extern int dpm_suspend_start(pm_message_t state);
extern int dpm_suspend(pm_message_t state);
extern int dpm_prepare(pm_message_t state);
extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
extern int pm_generic_prepare(struct device *dev);
+extern int pm_generic_suspend_late(struct device *dev);
extern int pm_generic_suspend_noirq(struct device *dev);
extern int pm_generic_suspend(struct device *dev);
+extern int pm_generic_resume_early(struct device *dev);
extern int pm_generic_resume_noirq(struct device *dev);
extern int pm_generic_resume(struct device *dev);
extern int pm_generic_freeze_noirq(struct device *dev);
+extern int pm_generic_freeze_late(struct device *dev);
extern int pm_generic_freeze(struct device *dev);
extern int pm_generic_thaw_noirq(struct device *dev);
+extern int pm_generic_thaw_early(struct device *dev);
extern int pm_generic_thaw(struct device *dev);
extern int pm_generic_restore_noirq(struct device *dev);
+extern int pm_generic_restore_early(struct device *dev);
extern int pm_generic_restore(struct device *dev);
extern int pm_generic_poweroff_noirq(struct device *dev);
+extern int pm_generic_poweroff_late(struct device *dev);
extern int pm_generic_poweroff(struct device *dev);
extern void pm_generic_complete(struct device *dev);
projects / mirror_ubuntu-artful-kernel.git / blobdiff