* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
u8 ampdu_len;
u8 antenna;
u16 tx_time;
+ bool is_valid_ack_signal;
void *status_driver_data[19 / sizeof(void *)];
} status;
struct {
* the first subframe.
* @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must
* be done in the hardware.
+ * @RX_FLAG_AMPDU_EOF_BIT: Value of the EOF bit in the A-MPDU delimiter for this
+ * frame
+ * @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = BIT(0),
RX_FLAG_MIC_STRIPPED = BIT(21),
RX_FLAG_ALLOW_SAME_PN = BIT(22),
RX_FLAG_ICV_STRIPPED = BIT(23),
+ RX_FLAG_AMPDU_EOF_BIT = BIT(24),
+ RX_FLAG_AMPDU_EOF_BIT_KNOWN = BIT(25),
};
/**
* @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware supports buffer STA on
* TDLS links.
*
+ * @IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP: The driver requires the
+ * mgd_prepare_tx() callback to be called before transmission of a
+ * deauthentication frame in case the association was completed but no
+ * beacon was heard. This is required in multi-channel scenarios, where the
+ * virtual interface might not be given air time for the transmission of
+ * the frame, as it is not synced with the AP/P2P GO yet, and thus the
+ * deauthentication frame might not be transmitted.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
IEEE80211_HW_REPORTS_LOW_ACK,
IEEE80211_HW_SUPPORTS_TX_FRAG,
IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
+ IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
* management frame prior to having successfully associated to allow the
* driver to give it channel time for the transmission, to get a response
* and to be able to synchronize with the GO.
+ * For drivers that set %IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP, mac80211
+ * would also call this function before transmitting a deauthentication
+ * frame in case that no beacon was heard from the AP/P2P GO.
* The callback will be called before each transmission and upon return
* mac80211 will transmit the frame right away.
* The callback is optional and can (should!) sleep.
* The TX headroom reserved by mac80211 for its own tx_status functions.
* This is enough for the radiotap header.
*/
-#define IEEE80211_TX_STATUS_HEADROOM 14
+#define IEEE80211_TX_STATUS_HEADROOM ALIGN(14, 4)
/**
* ieee80211_sta_set_buffered - inform mac80211 about driver-buffered frames