BPF_PROG_TYPE_RAW_TRACEPOINT,
BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
BPF_PROG_TYPE_LWT_SEG6LOCAL,
+ BPF_PROG_TYPE_LIRC_MODE2,
};
enum bpf_attach_type {
BPF_CGROUP_INET6_CONNECT,
BPF_CGROUP_INET4_POST_BIND,
BPF_CGROUP_INET6_POST_BIND,
+ BPF_CGROUP_UDP4_SENDMSG,
+ BPF_CGROUP_UDP6_SENDMSG,
+ BPF_LIRC_MODE2,
__MAX_BPF_ATTACH_TYPE
};
* ::
*
* # sysctl kernel.perf_event_max_stack=<new value>
- *
* Return
* The positive or null stack id on success, or a negative error
* in case of failure.
* ::
*
* # sysctl kernel.perf_event_max_stack=<new value>
- *
* Return
- * a non-negative value equal to or less than size on success, or
- * a negative error in case of failure.
+ * A non-negative value equal to or less than *size* on success,
+ * or a negative error in case of failure.
*
* int skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
* Description
* in socket filters where *skb*\ **->data** does not always point
* to the start of the mac header and where "direct packet access"
* is not available.
- *
* Return
* 0 on success, or a negative error in case of failure.
*
* If lookup is successful and result shows packet is to be
* forwarded, the neighbor tables are searched for the nexthop.
* If successful (ie., FIB lookup shows forwarding and nexthop
- * is resolved), the nexthop address is returned in ipv4_dst,
- * ipv6_dst or mpls_out based on family, smac is set to mac
- * address of egress device, dmac is set to nexthop mac address,
- * rt_metric is set to metric from route.
+ * is resolved), the nexthop address is returned in ipv4_dst
+ * or ipv6_dst based on family, smac is set to mac address of
+ * egress device, dmac is set to nexthop mac address, rt_metric
+ * is set to metric from route (IPv4/IPv6 only).
*
* *plen* argument is the size of the passed in struct.
- * *flags* argument can be one or more BPF_FIB_LOOKUP_ flags:
+ * *flags* argument can be a combination of one or more of the
+ * following values:
*
- * **BPF_FIB_LOOKUP_DIRECT** means do a direct table lookup vs
- * full lookup using FIB rules
- * **BPF_FIB_LOOKUP_OUTPUT** means do lookup from an egress
- * perspective (default is ingress)
+ * **BPF_FIB_LOOKUP_DIRECT**
+ * Do a direct table lookup vs full lookup using FIB
+ * rules.
+ * **BPF_FIB_LOOKUP_OUTPUT**
+ * Perform lookup from an egress perspective (default is
+ * ingress).
*
* *ctx* is either **struct xdp_md** for XDP programs or
* **struct sk_buff** tc cls_act programs.
- *
* Return
* Egress device index on success, 0 if packet needs to continue
* up the stack for further processing or a negative error in case
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
+ *
+ * int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
+ * Description
+ * This helper is used in programs implementing IR decoding, to
+ * report a successfully decoded key press with *scancode*,
+ * *toggle* value in the given *protocol*. The scancode will be
+ * translated to a keycode using the rc keymap, and reported as
+ * an input key down event. After a period a key up event is
+ * generated. This period can be extended by calling either
+ * **bpf_rc_keydown** () again with the same values, or calling
+ * **bpf_rc_repeat** ().
+ *
+ * Some protocols include a toggle bit, in case the button was
+ * released and pressed again between consecutive scancodes.
+ *
+ * The *ctx* should point to the lirc sample as passed into
+ * the program.
+ *
+ * The *protocol* is the decoded protocol number (see
+ * **enum rc_proto** for some predefined values).
+ *
+ * This helper is only available is the kernel was compiled with
+ * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
+ * "**y**".
+ *
+ * Return
+ * 0
+ *
+ * int bpf_rc_repeat(void *ctx)
+ * Description
+ * This helper is used in programs implementing IR decoding, to
+ * report a successfully decoded repeat key message. This delays
+ * the generation of a key up event for previously generated
+ * key down event.
+ *
+ * Some IR protocols like NEC have a special IR message for
+ * repeating last button, for when a button is held down.
+ *
+ * The *ctx* should point to the lirc sample as passed into
+ * the program.
+ *
+ * This helper is only available is the kernel was compiled with
+ * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
+ * "**y**".
+ *
+ * Return
+ * 0
+ *
+ * uint64_t bpf_skb_cgroup_id(struct sk_buff *skb)
+ * Description
+ * Return the cgroup v2 id of the socket associated with the *skb*.
+ * This is roughly similar to the **bpf_get_cgroup_classid**\ ()
+ * helper for cgroup v1 by providing a tag resp. identifier that
+ * can be matched on or used for map lookups e.g. to implement
+ * policy. The cgroup v2 id of a given path in the hierarchy is
+ * exposed in user space through the f_handle API in order to get
+ * to the same 64-bit id.
+ *
+ * This helper can be used on TC egress path, but not on ingress,
+ * and is available only if the kernel was compiled with the
+ * **CONFIG_SOCK_CGROUP_DATA** configuration option.
+ * Return
+ * The id is returned or 0 in case the id could not be retrieved.
+ *
+ * u64 bpf_get_current_cgroup_id(void)
+ * Return
+ * A 64-bit integer containing the current cgroup id based
+ * on the cgroup within which the current task is running.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
FN(lwt_push_encap), \
FN(lwt_seg6_store_bytes), \
FN(lwt_seg6_adjust_srh), \
- FN(lwt_seg6_action),
+ FN(lwt_seg6_action), \
+ FN(rc_repeat), \
+ FN(rc_keydown), \
+ FN(skb_cgroup_id), \
+ FN(get_current_cgroup_id),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
};
__u8 tunnel_tos;
__u8 tunnel_ttl;
- __u16 tunnel_ext;
+ __u16 tunnel_ext; /* Padding, future use. */
__u32 tunnel_label;
};
__u32 reqid;
__u32 spi; /* Stored in network byte order */
__u16 family;
+ __u16 ext; /* Padding, future use. */
union {
__u32 remote_ipv4; /* Stored in network byte order */
__u32 remote_ipv6[4]; /* Stored in network byte order */
__u32 map_flags;
char name[BPF_OBJ_NAME_LEN];
__u32 ifindex;
+ __u32 :32;
__u64 netns_dev;
__u64 netns_ino;
__u32 btf_id;
__u32 family; /* Allows 4-byte read, but no write */
__u32 type; /* Allows 4-byte read, but no write */
__u32 protocol; /* Allows 4-byte read, but no write */
+ __u32 msg_src_ip4; /* Allows 1,2,4-byte read an 4-byte write.
+ * Stored in network byte order.
+ */
+ __u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write.
+ * Stored in network byte order.
+ */
};
/* User bpf_sock_ops struct to access socket values and specify request ops
#define BPF_FIB_LOOKUP_OUTPUT BIT(1)
struct bpf_fib_lookup {
- /* input */
- __u8 family; /* network family, AF_INET, AF_INET6, AF_MPLS */
+ /* input: network family for lookup (AF_INET, AF_INET6)
+ * output: network family of egress nexthop
+ */
+ __u8 family;
/* set if lookup is to consider L4 data - e.g., FIB rules */
__u8 l4_protocol;
union {
/* inputs to lookup */
__u8 tos; /* AF_INET */
- __be32 flowlabel; /* AF_INET6 */
+ __be32 flowinfo; /* AF_INET6, flow_label + priority */
- /* output: metric of fib result */
- __u32 rt_metric;
+ /* output: metric of fib result (IPv4/IPv6 only) */
+ __u32 rt_metric;
};
union {
- __be32 mpls_in;
__be32 ipv4_src;
__u32 ipv6_src[4]; /* in6_addr; network order */
};
- /* input to bpf_fib_lookup, *dst is destination address.
- * output: bpf_fib_lookup sets to gateway address
+ /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in
+ * network header. output: bpf_fib_lookup sets to gateway address
+ * if FIB lookup returns gateway route
*/
union {
- /* return for MPLS lookups */
- __be32 mpls_out[4]; /* support up to 4 labels */
__be32 ipv4_dst;
__u32 ipv6_dst[4]; /* in6_addr; network order */
};
projects / mirror_iproute2.git / blobdiff