#ifndef QEMU_H
#define QEMU_H
-#include "hostdep.h"
#include "cpu.h"
-#include "exec/exec-all.h"
#include "exec/cpu_ldst.h"
#undef DEBUG_REMAP
-#ifdef DEBUG_REMAP
-#endif /* DEBUG_REMAP */
#include "exec/user/abitypes.h"
-#include "exec/user/thunk.h"
#include "syscall_defs.h"
#include "target_syscall.h"
-#include "exec/gdbstub.h"
-/* This is the size of the host kernel's sigset_t, needed where we make
+/*
+ * This is the size of the host kernel's sigset_t, needed where we make
* direct system calls that take a sigset_t pointer and a size.
*/
#define SIGSET_T_SIZE (_NSIG / 8)
-/* This struct is used to hold certain information about the image.
+/*
+ * This struct is used to hold certain information about the image.
* Basically, it replicates in user space what would be certain
* task_struct fields in the kernel
*/
abi_ulong data_offset;
abi_ulong saved_auxv;
abi_ulong auxv_len;
- abi_ulong arg_start;
- abi_ulong arg_end;
- abi_ulong arg_strings;
- abi_ulong env_strings;
+ abi_ulong argc;
+ abi_ulong argv;
+ abi_ulong envc;
+ abi_ulong envp;
abi_ulong file_string;
uint32_t elf_flags;
- int personality;
+ int personality;
abi_ulong alignment;
+ bool exec_stack;
+
+ /* Generic semihosting knows about these pointers. */
+ abi_ulong arg_strings; /* strings for argv */
+ abi_ulong env_strings; /* strings for envp; ends arg_strings */
/* The fields below are used in FDPIC mode. */
abi_ulong loadmap_addr;
uint16_t nsegs;
- void *loadsegs;
+ void *loadsegs;
abi_ulong pt_dynamic_addr;
abi_ulong interpreter_loadmap_addr;
abi_ulong interpreter_pt_dynamic_addr;
#include "nwfpe/fpa11.h"
#endif
-#define MAX_SIGQUEUE_SIZE 1024
-
struct emulated_sigtable {
int pending; /* true if signal is pending */
target_siginfo_t info;
};
-/* NOTE: we force a big alignment so that the stack stored after is
- aligned too */
typedef struct TaskState {
pid_t ts_tid; /* tid (or pid) of this task */
#ifdef TARGET_ARM
struct emulated_sigtable sync_signal;
struct emulated_sigtable sigtab[TARGET_NSIG];
- /* This thread's signal mask, as requested by the guest program.
+ /*
+ * This thread's signal mask, as requested by the guest program.
* The actual signal mask of this thread may differ:
* + we don't let SIGSEGV and SIGBUS be blocked while running guest code
* + sometimes we block all signals to avoid races
*/
sigset_t signal_mask;
- /* The signal mask imposed by a guest sigsuspend syscall, if we are
+ /*
+ * The signal mask imposed by a guest sigsuspend syscall, if we are
* currently in the middle of such a syscall
*/
sigset_t sigsuspend_mask;
/* Nonzero if we're leaving a sigsuspend and sigsuspend_mask is valid. */
int in_sigsuspend;
- /* Nonzero if process_pending_signals() needs to do something (either
+ /*
+ * Nonzero if process_pending_signals() needs to do something (either
* handle a pending signal or unblock signals).
* This flag is written from a signal handler so should be accessed via
* the qatomic_read() and qatomic_set() functions. (It is not accessed
/* This thread's sigaltstack, if it has one */
struct target_sigaltstack sigaltstack_used;
-} __attribute__((aligned(16))) TaskState;
-
-extern char *exec_path;
-void init_task_state(TaskState *ts);
-void task_settid(TaskState *);
-void stop_all_tasks(void);
-extern const char *qemu_uname_release;
-extern unsigned long mmap_min_addr;
-
-/* ??? See if we can avoid exposing so much of the loader internals. */
-
-/* Read a good amount of data initially, to hopefully get all the
- program headers loaded. */
-#define BPRM_BUF_SIZE 1024
-
-/*
- * This structure is used to hold the arguments that are
- * used when loading binaries.
- */
-struct linux_binprm {
- char buf[BPRM_BUF_SIZE] __attribute__((aligned));
- abi_ulong p;
- int fd;
- int e_uid, e_gid;
- int argc, envc;
- char **argv;
- char **envp;
- char * filename; /* Name of binary */
- int (*core_dump)(int, const CPUArchState *); /* coredump routine */
-};
-
-typedef struct IOCTLEntry IOCTLEntry;
-
-typedef abi_long do_ioctl_fn(const IOCTLEntry *ie, uint8_t *buf_temp,
- int fd, int cmd, abi_long arg);
-
-struct IOCTLEntry {
- int target_cmd;
- unsigned int host_cmd;
- const char *name;
- int access;
- do_ioctl_fn *do_ioctl;
- const argtype arg_type[5];
-};
-
-extern IOCTLEntry ioctl_entries[];
-
-#define IOC_R 0x0001
-#define IOC_W 0x0002
-#define IOC_RW (IOC_R | IOC_W)
-
-void do_init_thread(struct target_pt_regs *regs, struct image_info *infop);
-abi_ulong loader_build_argptr(int envc, int argc, abi_ulong sp,
- abi_ulong stringp, int push_ptr);
-int loader_exec(int fdexec, const char *filename, char **argv, char **envp,
- struct target_pt_regs * regs, struct image_info *infop,
- struct linux_binprm *);
-
-/* Returns true if the image uses the FDPIC ABI. If this is the case,
- * we have to provide some information (loadmap, pt_dynamic_info) such
- * that the program can be relocated adequately. This is also useful
- * when handling signals.
- */
-int info_is_fdpic(struct image_info *info);
-uint32_t get_elf_eflags(int fd);
-int load_elf_binary(struct linux_binprm *bprm, struct image_info *info);
-int load_flt_binary(struct linux_binprm *bprm, struct image_info *info);
+ /* Start time of task after system boot in clock ticks */
+ uint64_t start_boottime;
+} TaskState;
-abi_long memcpy_to_target(abi_ulong dest, const void *src,
- unsigned long len);
-void target_set_brk(abi_ulong new_brk);
abi_long do_brk(abi_ulong new_brk);
-void syscall_init(void);
-abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
- abi_long arg2, abi_long arg3, abi_long arg4,
- abi_long arg5, abi_long arg6, abi_long arg7,
- abi_long arg8);
-extern __thread CPUState *thread_cpu;
-void cpu_loop(CPUArchState *env);
-const char *target_strerror(int err);
-int get_osversion(void);
-void init_qemu_uname_release(void);
-void fork_start(void);
-void fork_end(int child);
-
-/**
- * probe_guest_base:
- * @image_name: the executable being loaded
- * @loaddr: the lowest fixed address in the executable
- * @hiaddr: the highest fixed address in the executable
- *
- * Creates the initial guest address space in the host memory space.
- *
- * If @loaddr == 0, then no address in the executable is fixed,
- * i.e. it is fully relocatable. In that case @hiaddr is the size
- * of the executable.
- *
- * This function will not return if a valid value for guest_base
- * cannot be chosen. On return, the executable loader can expect
- *
- * target_mmap(loaddr, hiaddr - loaddr, ...)
- *
- * to succeed.
- */
-void probe_guest_base(const char *image_name,
- abi_ulong loaddr, abi_ulong hiaddr);
-
-#include "qemu/log.h"
-
-/* safe_syscall.S */
-
-/**
- * safe_syscall:
- * @int number: number of system call to make
- * ...: arguments to the system call
- *
- * Call a system call if guest signal not pending.
- * This has the same API as the libc syscall() function, except that it
- * may return -1 with errno == TARGET_ERESTARTSYS if a signal was pending.
- *
- * Returns: the system call result, or -1 with an error code in errno
- * (Errnos are host errnos; we rely on TARGET_ERESTARTSYS not clashing
- * with any of the host errno values.)
- */
-
-/* A guide to using safe_syscall() to handle interactions between guest
- * syscalls and guest signals:
- *
- * Guest syscalls come in two flavours:
- *
- * (1) Non-interruptible syscalls
- *
- * These are guest syscalls that never get interrupted by signals and
- * so never return EINTR. They can be implemented straightforwardly in
- * QEMU: just make sure that if the implementation code has to make any
- * blocking calls that those calls are retried if they return EINTR.
- * It's also OK to implement these with safe_syscall, though it will be
- * a little less efficient if a signal is delivered at the 'wrong' moment.
- *
- * Some non-interruptible syscalls need to be handled using block_signals()
- * to block signals for the duration of the syscall. This mainly applies
- * to code which needs to modify the data structures used by the
- * host_signal_handler() function and the functions it calls, including
- * all syscalls which change the thread's signal mask.
- *
- * (2) Interruptible syscalls
- *
- * These are guest syscalls that can be interrupted by signals and
- * for which we need to either return EINTR or arrange for the guest
- * syscall to be restarted. This category includes both syscalls which
- * always restart (and in the kernel return -ERESTARTNOINTR), ones
- * which only restart if there is no handler (kernel returns -ERESTARTNOHAND
- * or -ERESTART_RESTARTBLOCK), and the most common kind which restart
- * if the handler was registered with SA_RESTART (kernel returns
- * -ERESTARTSYS). System calls which are only interruptible in some
- * situations (like 'open') also need to be handled this way.
- *
- * Here it is important that the host syscall is made
- * via this safe_syscall() function, and *not* via the host libc.
- * If the host libc is used then the implementation will appear to work
- * most of the time, but there will be a race condition where a
- * signal could arrive just before we make the host syscall inside libc,
- * and then then guest syscall will not correctly be interrupted.
- * Instead the implementation of the guest syscall can use the safe_syscall
- * function but otherwise just return the result or errno in the usual
- * way; the main loop code will take care of restarting the syscall
- * if appropriate.
- *
- * (If the implementation needs to make multiple host syscalls this is
- * OK; any which might really block must be via safe_syscall(); for those
- * which are only technically blocking (ie which we know in practice won't
- * stay in the host kernel indefinitely) it's OK to use libc if necessary.
- * You must be able to cope with backing out correctly if some safe_syscall
- * you make in the implementation returns either -TARGET_ERESTARTSYS or
- * EINTR though.)
- *
- * block_signals() cannot be used for interruptible syscalls.
- *
- *
- * How and why the safe_syscall implementation works:
- *
- * The basic setup is that we make the host syscall via a known
- * section of host native assembly. If a signal occurs, our signal
- * handler checks the interrupted host PC against the addresse of that
- * known section. If the PC is before or at the address of the syscall
- * instruction then we change the PC to point at a "return
- * -TARGET_ERESTARTSYS" code path instead, and then exit the signal handler
- * (causing the safe_syscall() call to immediately return that value).
- * Then in the main.c loop if we see this magic return value we adjust
- * the guest PC to wind it back to before the system call, and invoke
- * the guest signal handler as usual.
- *
- * This winding-back will happen in two cases:
- * (1) signal came in just before we took the host syscall (a race);
- * in this case we'll take the guest signal and have another go
- * at the syscall afterwards, and this is indistinguishable for the
- * guest from the timing having been different such that the guest
- * signal really did win the race
- * (2) signal came in while the host syscall was blocking, and the
- * host kernel decided the syscall should be restarted;
- * in this case we want to restart the guest syscall also, and so
- * rewinding is the right thing. (Note that "restart" semantics mean
- * "first call the signal handler, then reattempt the syscall".)
- * The other situation to consider is when a signal came in while the
- * host syscall was blocking, and the host kernel decided that the syscall
- * should not be restarted; in this case QEMU's host signal handler will
- * be invoked with the PC pointing just after the syscall instruction,
- * with registers indicating an EINTR return; the special code in the
- * handler will not kick in, and we will return EINTR to the guest as
- * we should.
- *
- * Notice that we can leave the host kernel to make the decision for
- * us about whether to do a restart of the syscall or not; we do not
- * need to check SA_RESTART flags in QEMU or distinguish the various
- * kinds of restartability.
- */
-#ifdef HAVE_SAFE_SYSCALL
-/* The core part of this function is implemented in assembly */
-extern long safe_syscall_base(int *pending, long number, ...);
-
-#define safe_syscall(...) \
- ({ \
- long ret_; \
- int *psp_ = &((TaskState *)thread_cpu->opaque)->signal_pending; \
- ret_ = safe_syscall_base(psp_, __VA_ARGS__); \
- if (is_error(ret_)) { \
- errno = -ret_; \
- ret_ = -1; \
- } \
- ret_; \
- })
-
-#else
-
-/* Fallback for architectures which don't yet provide a safe-syscall assembly
- * fragment; note that this is racy!
- * This should go away when all host architectures have been updated.
- */
-#define safe_syscall syscall
-
-#endif
-
-/* syscall.c */
-int host_to_target_waitstatus(int status);
-
-/* strace.c */
-void print_syscall(void *cpu_env, int num,
- abi_long arg1, abi_long arg2, abi_long arg3,
- abi_long arg4, abi_long arg5, abi_long arg6);
-void print_syscall_ret(void *cpu_env, int num, abi_long ret,
- abi_long arg1, abi_long arg2, abi_long arg3,
- abi_long arg4, abi_long arg5, abi_long arg6);
-/**
- * print_taken_signal:
- * @target_signum: target signal being taken
- * @tinfo: target_siginfo_t which will be passed to the guest for the signal
- *
- * Print strace output indicating that this signal is being taken by the guest,
- * in a format similar to:
- * --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
- */
-void print_taken_signal(int target_signum, const target_siginfo_t *tinfo);
-
-/* signal.c */
-void process_pending_signals(CPUArchState *cpu_env);
-void signal_init(void);
-int queue_signal(CPUArchState *env, int sig, int si_type,
- target_siginfo_t *info);
-void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info);
-void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo);
-int target_to_host_signal(int sig);
-int host_to_target_signal(int sig);
-long do_sigreturn(CPUArchState *env);
-long do_rt_sigreturn(CPUArchState *env);
-abi_long do_sigaltstack(abi_ulong uss_addr, abi_ulong uoss_addr, abi_ulong sp);
-int do_sigprocmask(int how, const sigset_t *set, sigset_t *oldset);
-abi_long do_swapcontext(CPUArchState *env, abi_ulong uold_ctx,
- abi_ulong unew_ctx, abi_long ctx_size);
-/**
- * block_signals: block all signals while handling this guest syscall
- *
- * Block all signals, and arrange that the signal mask is returned to
- * its correct value for the guest before we resume execution of guest code.
- * If this function returns non-zero, then the caller should immediately
- * return -TARGET_ERESTARTSYS to the main loop, which will take the pending
- * signal and restart execution of the syscall.
- * If block_signals() returns zero, then the caller can continue with
- * emulation of the system call knowing that no signals can be taken
- * (and therefore that no race conditions will result).
- * This should only be called once, because if it is called a second time
- * it will always return non-zero. (Think of it like a mutex that can't
- * be recursively locked.)
- * Signals will be unblocked again by process_pending_signals().
- *
- * Return value: non-zero if there was a pending signal, zero if not.
- */
-int block_signals(void); /* Returns non zero if signal pending */
-
-#ifdef TARGET_I386
-/* vm86.c */
-void save_v86_state(CPUX86State *env);
-void handle_vm86_trap(CPUX86State *env, int trapno);
-void handle_vm86_fault(CPUX86State *env);
-int do_vm86(CPUX86State *env, long subfunction, abi_ulong v86_addr);
-#elif defined(TARGET_SPARC64)
-void sparc64_set_context(CPUSPARCState *env);
-void sparc64_get_context(CPUSPARCState *env);
-#endif
-
-/* mmap.c */
-int target_mprotect(abi_ulong start, abi_ulong len, int prot);
-abi_long target_mmap(abi_ulong start, abi_ulong len, int prot,
- int flags, int fd, abi_ulong offset);
-int target_munmap(abi_ulong start, abi_ulong len);
-abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,
- abi_ulong new_size, unsigned long flags,
- abi_ulong new_addr);
-extern unsigned long last_brk;
-extern abi_ulong mmap_next_start;
-abi_ulong mmap_find_vma(abi_ulong, abi_ulong, abi_ulong);
-void mmap_fork_start(void);
-void mmap_fork_end(int child);
-
-/* main.c */
-extern unsigned long guest_stack_size;
/* user access */
#define VERIFY_READ PAGE_READ
#define VERIFY_WRITE (PAGE_READ | PAGE_WRITE)
-static inline bool access_ok(int type, abi_ulong addr, abi_ulong size)
+static inline bool access_ok_untagged(int type, abi_ulong addr, abi_ulong size)
{
if (size == 0
- ? !guest_addr_valid(addr)
- : !guest_range_valid(addr, size)) {
+ ? !guest_addr_valid_untagged(addr)
+ : !guest_range_valid_untagged(addr, size)) {
return false;
}
return page_check_range((target_ulong)addr, size, type) == 0;
}
+static inline bool access_ok(CPUState *cpu, int type,
+ abi_ulong addr, abi_ulong size)
+{
+ return access_ok_untagged(type, cpu_untagged_addr(cpu, addr), size);
+}
+
/* NOTE __get_user and __put_user use host pointers and don't check access.
These are usually used to access struct data members once the struct has
been locked - usually with lock_user_struct. */
} while (0)
-#ifdef TARGET_WORDS_BIGENDIAN
+#if TARGET_BIG_ENDIAN
# define __put_user(x, hptr) __put_user_e(x, hptr, be)
# define __get_user(x, hptr) __get_user_e(x, hptr, be)
#else
* buffers between the target and host. These internally perform
* locking/unlocking of the memory.
*/
-abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len);
-abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len);
+int copy_from_user(void *hptr, abi_ulong gaddr, ssize_t len);
+int copy_to_user(abi_ulong gaddr, void *hptr, ssize_t len);
/* Functions for accessing guest memory. The tget and tput functions
read/write single values, byteswapping as necessary. The lock_user function
/* Lock an area of guest memory into the host. If copy is true then the
host area will have the same contents as the guest. */
-static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy)
-{
- if (!access_ok(type, guest_addr, len))
- return NULL;
-#ifdef DEBUG_REMAP
- {
- void *addr;
- addr = g_malloc(len);
- if (copy)
- memcpy(addr, g2h(guest_addr), len);
- else
- memset(addr, 0, len);
- return addr;
- }
-#else
- return g2h_untagged(guest_addr);
-#endif
-}
+void *lock_user(int type, abi_ulong guest_addr, ssize_t len, bool copy);
/* Unlock an area of guest memory. The first LEN bytes must be
flushed back to guest memory. host_ptr = NULL is explicitly
allowed and does nothing. */
+#ifndef DEBUG_REMAP
static inline void unlock_user(void *host_ptr, abi_ulong guest_addr,
- long len)
+ ssize_t len)
{
-
-#ifdef DEBUG_REMAP
- if (!host_ptr)
- return;
- if (host_ptr == g2h_untagged(guest_addr))
- return;
- if (len > 0)
- memcpy(g2h_untagged(guest_addr), host_ptr, len);
- g_free(host_ptr);
-#endif
+ /* no-op */
}
+#else
+void unlock_user(void *host_ptr, abi_ulong guest_addr, ssize_t len);
+#endif
/* Return the length of a string in target memory or -TARGET_EFAULT if
access error. */
-abi_long target_strlen(abi_ulong gaddr);
+ssize_t target_strlen(abi_ulong gaddr);
/* Like lock_user but for null terminated strings. */
-static inline void *lock_user_string(abi_ulong guest_addr)
-{
- abi_long len;
- len = target_strlen(guest_addr);
- if (len < 0)
- return NULL;
- return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1);
-}
+void *lock_user_string(abi_ulong guest_addr);
/* Helper macros for locking/unlocking a target struct. */
#define lock_user_struct(type, host_ptr, guest_addr, copy) \
#define unlock_user_struct(host_ptr, guest_addr, copy) \
unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
-#include <pthread.h>
-
-static inline int is_error(abi_long ret)
-{
- return (abi_ulong)ret >= (abi_ulong)(-4096);
-}
-
-#if TARGET_ABI_BITS == 32
-static inline uint64_t target_offset64(uint32_t word0, uint32_t word1)
-{
-#ifdef TARGET_WORDS_BIGENDIAN
- return ((uint64_t)word0 << 32) | word1;
-#else
- return ((uint64_t)word1 << 32) | word0;
-#endif
-}
-#else /* TARGET_ABI_BITS == 32 */
-static inline uint64_t target_offset64(uint64_t word0, uint64_t word1)
-{
- return word0;
-}
-#endif /* TARGET_ABI_BITS != 32 */
-
-void print_termios(void *arg);
-
-/* ARM EABI and MIPS expect 64bit types aligned even on pairs or registers */
-#ifdef TARGET_ARM
-static inline int regpairs_aligned(void *cpu_env, int num)
-{
- return ((((CPUARMState *)cpu_env)->eabi) == 1) ;
-}
-#elif defined(TARGET_MIPS) && (TARGET_ABI_BITS == 32)
-static inline int regpairs_aligned(void *cpu_env, int num) { return 1; }
-#elif defined(TARGET_PPC) && !defined(TARGET_PPC64)
-/*
- * SysV AVI for PPC32 expects 64bit parameters to be passed on odd/even pairs
- * of registers which translates to the same as ARM/MIPS, because we start with
- * r3 as arg1
- */
-static inline int regpairs_aligned(void *cpu_env, int num) { return 1; }
-#elif defined(TARGET_SH4)
-/* SH4 doesn't align register pairs, except for p{read,write}64 */
-static inline int regpairs_aligned(void *cpu_env, int num)
-{
- switch (num) {
- case TARGET_NR_pread64:
- case TARGET_NR_pwrite64:
- return 1;
-
- default:
- return 0;
- }
-}
-#elif defined(TARGET_XTENSA)
-static inline int regpairs_aligned(void *cpu_env, int num) { return 1; }
-#else
-static inline int regpairs_aligned(void *cpu_env, int num) { return 0; }
-#endif
-
-/**
- * preexit_cleanup: housekeeping before the guest exits
- *
- * env: the CPU state
- * code: the exit code
- */
-void preexit_cleanup(CPUArchState *env, int code);
-
-/* Include target-specific struct and function definitions;
- * they may need access to the target-independent structures
- * above, so include them last.
- */
-#include "target_cpu.h"
-#include "target_structs.h"
-
#endif /* QEMU_H */
projects / mirror_qemu.git / blobdiff