.RB "[ " numrxqueues
.IR QUEUE_COUNT " ]"
.br
+.BR "[ " gso_max_size
+.IR BYTES " ]"
+.RB "[ " gso_max_segs
+.IR SEGMENTS " ]"
+.br
.BI type " TYPE"
.RI "[ " ARGS " ]"
.BR macvlan " | "
.BR macvtap " | "
.BR vcan " | "
+.BR vxcan " | "
.BR veth " | "
.BR vlan " | "
.BR vxlan " |"
.BR erspan " |"
.BR ip6gre " |"
.BR ip6gretap " |"
+.BR ip6erspan " |"
.BR vti " |"
.BR nlmon " |"
.BR ipvlan " |"
+.BR ipvtap " |"
.BR lowpan " |"
.BR geneve " |"
.BR vrf " |"
-.BR macsec " ]"
+.BR macsec " |"
+.BR netdevsim " |"
+.BR rmnet " ]"
.ti -8
.IR ETYPE " := [ " TYPE " |"
.sp
.B bond
- Bonding device
-.B can
-- Controller Area Network interface
.sp
.B dummy
- Dummy network interface
.B vcan
- Virtual Controller Area Network interface
.sp
+.B vxcan
+- Virtual Controller Area Network tunnel interface
+.sp
.B veth
- Virtual ethernet interface
.sp
.BR ip6gretap
- Virtual L2 tunnel interface GRE over IPv6
.sp
+.BR ip6erspan
+- Encapsulated Remote SPAN over GRE and IPv6
+.sp
.BR vti
- Virtual tunnel interface
.sp
.BR ipvlan
- Interface for L3 (IPv6/IPv4) based VLANs
.sp
+.BR ipvtap
+- Interface for L3 (IPv6/IPv4) based VLANs and TAP
+.sp
.BR lowpan
- Interface for 6LoWPAN (IPv6) over IEEE 802.15.4 / Bluetooth
.sp
.sp
.BR vrf
- Interface for L3 VRF domains
+.sp
+.BR netdevsim
+- Interface for netdev API tests
+.sp
+.BR rmnet
+- Qualcomm rmnet device
.in -8
.TP
.BI numrxqueues " QUEUE_COUNT "
specifies the number of receive queues for new device.
+.TP
+.BI gso_max_size " BYTES "
+specifies the recommended maximum size of a Generic Segment Offload packet the new device should accept.
+
+.TP
+.BI gso_max_segs " SEGMENTS "
+specifies the recommended maximum number of a Generic Segment Offload segments the new device should accept.
+
.TP
.BI index " IDX "
specifies the desired index of the new virtual device. The link creation fails, if the index is busy.
.in -8
.TP
-GRE, IPIP, SIT, ERSPAN Type Support
+VETH, VXCAN Type Support
For a link of types
-.I GRE/IPIP/SIT/ERSPAN
+.I VETH/VXCAN
the following additional arguments are supported:
.BI "ip link add " DEVICE
-.BR type " { " gre " | " ipip " | " sit " | " erspan " }"
+.BR type " { " veth " | " vxcan " }"
+[
+.BR peer
+.BI "name " NAME
+]
+
+.in +8
+.sp
+.BR peer
+.BI "name " NAME
+- specifies the virtual pair device name of the
+.I VETH/VXCAN
+tunnel.
+
+.in -8
+
+.TP
+IPIP, SIT Type Support
+For a link of type
+.IR IPIP or SIT
+the following additional arguments are supported:
+
+.BI "ip link add " DEVICE
+.BR type " { " ipip " | " sit " }"
.BI " remote " ADDR " local " ADDR
[
.BR encap " { " fou " | " gue " | " none " }"
] [
.I " mode " { ip6ip | ipip | mplsip | any } "
] [
-.BR erspan " \fIIDX "
+.BR external
]
.in +8
IPv6-Over-IPv4 is not supported for IPIP.
.sp
-.BR erspan " \fIIDX "
-- specifies the ERSPAN index field.
-.IR IDX
-indicates a 20 bit index/port number associated with the ERSPAN
-traffic's source port and direction.
+.BR external
+- make this tunnel externally controlled
+.RB "(e.g. " "ip route encap" ).
+
+.in -8
+.TP
+GRE Type Support
+For a link of type
+.IR GRE " or " GRETAP
+the following additional arguments are supported:
+
+.BI "ip link add " DEVICE
+.BR type " { " gre " | " gretap " }"
+.BI " remote " ADDR " local " ADDR
+[
+.RB [ no ] "" [ i | o ] seq
+] [
+.RB [ i | o ] key
+.I KEY
+|
+.BR no [ i | o ] key
+] [
+.RB [ no ] "" [ i | o ] csum
+] [
+.BI ttl " TTL "
+] [
+.BI tos " TOS "
+] [
+.RB [ no ] pmtudisc
+] [
+.RB [ no ] ignore-df
+] [
+.BI dev " PHYS_DEV "
+] [
+.BR encap " { " fou " | " gue " | " none " }"
+] [
+.BR encap-sport " { " \fIPORT " | " auto " }"
+] [
+.BI "encap-dport " PORT
+] [
+.RB [ no ] encap-csum
+] [
+.RB [ no ] encap-remcsum
+] [
+.BR external
+]
+
+.in +8
+.sp
+.BI remote " ADDR "
+- specifies the remote address of the tunnel.
+
+.sp
+.BI local " ADDR "
+- specifies the fixed local address for tunneled packets.
+It must be an address on another interface on this host.
+
+.sp
+.RB [ no ] "" [ i | o ] seq
+- serialize packets.
+The
+.B oseq
+flag enables sequencing of outgoing packets.
+The
+.B iseq
+flag requires that all input packets are serialized.
+
+.sp
+.RB [ i | o ] key
+.I KEY
+|
+.BR no [ i | o ] key
+- use keyed GRE with key
+.IR KEY ". "KEY
+is either a number or an IPv4 address-like dotted quad.
+The
+.B key
+parameter specifies the same key to use in both directions.
+The
+.BR ikey " and " okey
+parameters specify different keys for input and output.
+
+.sp
+.RB [ no ] "" [ i | o ] csum
+- generate/require checksums for tunneled packets.
+The
+.B ocsum
+flag calculates checksums for outgoing packets.
+The
+.B icsum
+flag requires that all input packets have the correct
+checksum. The
+.B csum
+flag is equivalent to the combination
+.B "icsum ocsum" .
+
+.sp
+.BI ttl " TTL"
+- specifies the TTL value to use in outgoing packets.
+
+.sp
+.BI tos " TOS"
+- specifies the TOS value to use in outgoing packets.
+
+.sp
+.RB [ no ] pmtudisc
+- enables/disables Path MTU Discovery on this tunnel.
+It is enabled by default. Note that a fixed ttl is incompatible
+with this option: tunneling with a fixed ttl always makes pmtu
+discovery.
+
+.sp
+.RB [ no ] ignore-df
+- enables/disables IPv4 DF suppression on this tunnel.
+Normally datagrams that exceed the MTU will be fragmented; the presence
+of the DF flag inhibits this, resulting instead in an ICMP Unreachable
+(Fragmentation Required) message. Enabling this attribute casues the
+DF flag to be ignored.
+
+.sp
+.BI dev " PHYS_DEV"
+- specifies the physical device to use for tunnel endpoint communication.
+
+.sp
+.BR encap " { " fou " | " gue " | " none " }"
+- specifies type of secondary UDP encapsulation. "fou" indicates
+Foo-Over-UDP, "gue" indicates Generic UDP Encapsulation.
+
+.sp
+.BR encap-sport " { " \fIPORT " | " auto " }"
+- specifies the source port in UDP encapsulation.
+.IR PORT
+indicates the port by number, "auto"
+indicates that the port number should be chosen automatically
+(the kernel picks a flow based on the flow hash of the
+encapsulated packet).
+
+.sp
+.RB [ no ] encap-csum
+- specifies if UDP checksums are enabled in the secondary
+encapsulation.
+
+.sp
+.RB [ no ] encap-remcsum
+- specifies if Remote Checksum Offload is enabled. This is only
+applicable for Generic UDP Encapsulation.
+
+.sp
+.BR external
+- make this tunnel externally controlled
+.RB "(e.g. " "ip route encap" ).
.in -8
.BR type " { " ip6gre " | " ip6gretap " }"
.BI remote " ADDR " local " ADDR"
[
-.RB [ i | o ] seq
+.RB [ no ] "" [ i | o ] seq
] [
.RB [ i | o ] key
.I KEY
+|
+.BR no [ i | o ] key
] [
-.RB [ i | o ] csum
+.RB [ no ] "" [ i | o ] csum
] [
.BI hoplimit " TTL "
] [
] [
.BI "dscp inherit"
] [
+.BI "[no]allow-localremote"
+] [
.BI dev " PHYS_DEV "
+] [
+.RB external
]
.in +8
It must be an address on another interface on this host.
.sp
-.RB [ i | o ] seq
+.RB [ no ] "" [ i | o ] seq
- serialize packets.
The
.B oseq
flag requires that all input packets are serialized.
.sp
-.RB [ i | o ] key " \fIKEY"
+.RB [ i | o ] key
+.I KEY
+|
+.BR no [ i | o ] key
- use keyed GRE with key
.IR KEY ". "KEY
is either a number or an IPv4 address-like dotted quad.
parameters specify different keys for input and output.
.sp
-.RB [ i | o ] csum
+.RB [ no ] "" [ i | o ] csum
- generate/require checksums for tunneled packets.
The
.B ocsum
.BI flowlabel " FLOWLABEL"
- specifies a fixed flowlabel.
+.sp
+.BI [no]allow-localremote
+- specifies whether to allow remote endpoint to have an address configured on
+local host.
+
.sp
.BI tclass " TCLASS"
- specifies the traffic class field on
.IR 00 ".." ff
when tunneling non-IP packets. The default value is 00.
+.sp
+.RB external
+- make this tunnel externally controlled (or not, which is the default).
+In the kernel, this is referred to as collect metadata mode. This flag is
+mutually exclusive with the
+.BR remote ,
+.BR local ,
+.BR seq ,
+.BR key,
+.BR csum,
+.BR hoplimit,
+.BR encaplimit,
+.BR flowlabel " and " tclass
+options.
+
.in -8
.TP
.BI mode " MODE "
- specifies the mode (datagram or connected) to use.
+.TP
+ERSPAN Type Support
+For a link of type
+.I ERSPAN/IP6ERSPAN
+the following additional arguments are supported:
+
+.BI "ip link add " DEVICE
+.BR type " { " erspan " | " ip6erspan " }"
+.BI remote " ADDR " local " ADDR " seq
+.RB key
+.I KEY
+.BR erspan_ver " \fIversion "
+[
+.BR erspan " \fIIDX "
+] [
+.BR erspan_dir " { " \fIingress " | " \fIegress " }"
+] [
+.BR erspan_hwid " \fIhwid "
+] [
+.BI "[no]allow-localremote"
+] [
+.RB external
+]
+
+.in +8
+.sp
+.BI remote " ADDR "
+- specifies the remote address of the tunnel.
+
+.sp
+.BI local " ADDR "
+- specifies the fixed local address for tunneled packets.
+It must be an address on another interface on this host.
+
+.sp
+.BR erspan_ver " \fIversion "
+- specifies the ERSPAN version number.
+.IR version
+indicates the ERSPAN version to be created: 1 for version 1 (type II)
+or 2 for version 2 (type III).
+
+.sp
+.BR erspan " \fIIDX "
+- specifies the ERSPAN v1 index field.
+.IR IDX
+indicates a 20 bit index/port number associated with the ERSPAN
+traffic's source port and direction.
+
+.sp
+.BR erspan_dir " { " \fIingress " | " \fIegress " }"
+- specifies the ERSPAN v2 mirrored traffic's direction.
+
+.sp
+.BR erspan_hwid " \fIhwid "
+- an unique identifier of an ERSPAN v2 engine within a system.
+.IR hwid
+is a 6-bit value for users to configure.
+
+.sp
+.BI [no]allow-localremote
+- specifies whether to allow remote endpoint to have an address configured on
+local host.
+
+.sp
+.BR external
+- make this tunnel externally controlled (or not, which is the default).
+In the kernel, this is referred to as collect metadata mode. This flag is
+mutually exclusive with the
+.BR remote ,
+.BR local ,
+.BR erspan_ver ,
+.BR erspan ,
+.BR erspan_dir " and " erspan_hwid
+options.
+
+.in -8
+
.TP
GENEVE Type Support
For a link of type
arptables hooks on the bridge.
-.in-8
+.in -8
.TP
MACsec Type Support
.in -8
+.TP
+RMNET Type Support
+For a link of type
+.I RMNET
+the following additional arguments are supported:
+
+.BI "ip link add link " DEVICE " name " NAME " type rmnet mux_id " MUXID
+
+.in +8
+.sp
+.BI mux_id " MUXID "
+- specifies the mux identifier for the rmnet device, possible values 1-254.
+
+.in -8
+
.SS ip link delete - delete virtual link
.TP
.sp
.BI max_tx_rate " TXRATE"
- change the allowed maximum transmit bandwidth, in Mbps, for the specified VF.
+Setting this parameter to 0 disables rate limiting.
.B vf
parameter must be specified.
.BI min_tx_rate " TXRATE"
- change the allowed minimum transmit bandwidth, in Mbps, for the specified VF.
Minimum TXRATE should be always <= Maximum TXRATE.
+Setting this parameter to 0 disables rate limiting.
.B vf
parameter must be specified.
] [
.BR mcast_flood " { " on " | " off " }"
] [
-.BR group_fwd_mask " MASK ]"
+.BR group_fwd_mask " MASK"
+] [
+.BR neigh_suppress " { " on " | " off " }"
+] [
+.BR vlan_tunnel " { " on " | " off " }"
+] [
+.BR isolated " { " on " | " off " }"
+] [
+.BR backup_port " DEVICE"
+] [
+.BR nobackup_port " ]"
.in +8
.sp
.BI group_fwd_mask " MASK "
- set the group forward mask. This is the bitmask that is applied to decide whether to forward incoming frames destined to link-local addresses, ie addresses of the form 01:80:C2:00:00:0X (defaults to 0, ie the bridge does not forward any link-local frames coming on this port).
+.BR neigh_suppress " { " on " | " off " }"
+- controls whether neigh discovery (arp and nd) proxy and suppression is enabled on the port. By default this flag is off.
+
+.BR vlan_tunnel " { " on " | " off " }"
+- controls whether vlan to tunnel mapping is enabled on the port. By default this flag is off.
+
+.BI backup_port " DEVICE"
+- if the port loses carrier all traffic will be redirected to the configured backup port
+
+.BR nobackup_port
+- removes the currently configured backup port
+
.in -8
.TP
Creates a 6LoWPAN interface named lowpan0 on the underlying
IEEE 802.15.4 device wpan0.
.RE
+.PP
+ip link add dev ip6erspan11 type ip6erspan seq key 102
+local fc00:100::2 remote fc00:100::1
+erspan_ver 2 erspan_dir ingress erspan_hwid 17
+.RS 4
+Creates a IP6ERSPAN version 2 interface named ip6erspan00.
+.RE
.SH SEE ALSO
.br
projects / mirror_iproute2.git / blobdiff