* GNU GPL, version 2 or (at your option) any later version.
*/
+#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
flush_page_queue(s);
- if (s->file) {
+ if (s->to_dst_file) {
trace_migrate_fd_cleanup();
qemu_mutex_unlock_iothread();
if (s->migration_thread_running) {
qemu_mutex_lock_iothread();
migrate_compress_threads_join();
- qemu_fclose(s->file);
- s->file = NULL;
+ qemu_fclose(s->to_dst_file);
+ s->to_dst_file = NULL;
}
assert((s->state != MIGRATION_STATUS_ACTIVE) &&
void migrate_fd_error(MigrationState *s)
{
trace_migrate_fd_error();
- assert(s->file == NULL);
+ assert(s->to_dst_file == NULL);
migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
MIGRATION_STATUS_FAILED);
notifier_list_notify(&migration_state_notifiers, s);
static void migrate_fd_cancel(MigrationState *s)
{
int old_state ;
- QEMUFile *f = migrate_get_current()->file;
+ QEMUFile *f = migrate_get_current()->to_dst_file;
trace_migrate_fd_cancel();
if (s->rp_state.from_dst_file) {
s->bytes_xfer = 0;
s->xfer_limit = 0;
s->cleanup_bh = 0;
- s->file = NULL;
+ s->to_dst_file = NULL;
s->state = MIGRATION_STATUS_NONE;
s->params = *params;
s->rp_state.from_dst_file = NULL;
return;
}
- /* We are starting a new migration, so we want to start in a clean
- state. This change is only needed if previous migration
- failed/was cancelled. We don't use migrate_set_state() because
- we are setting the initial state, not changing it. */
- s->state = MIGRATION_STATUS_NONE;
-
s = migrate_init(¶ms);
if (strstart(uri, "tcp:", &p)) {
s = migrate_get_current();
s->bandwidth_limit = value;
- if (s->file) {
- qemu_file_set_rate_limit(s->file, s->bandwidth_limit / XFER_LIMIT_RATIO);
+ if (s->to_dst_file) {
+ qemu_file_set_rate_limit(s->to_dst_file,
+ s->bandwidth_limit / XFER_LIMIT_RATIO);
}
}
static int open_return_path_on_source(MigrationState *ms)
{
- ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->file);
+ ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->to_dst_file);
if (!ms->rp_state.from_dst_file) {
return -1;
}
* rp_thread will exit, however if there's an error we need to cause
* it to exit.
*/
- if (qemu_file_get_error(ms->file) && ms->rp_state.from_dst_file) {
+ if (qemu_file_get_error(ms->to_dst_file) && ms->rp_state.from_dst_file) {
/*
* shutdown(2), if we have it, will cause it to unblock if it's stuck
* waiting for the destination.
* Cause any non-postcopiable, but iterative devices to
* send out their final data.
*/
- qemu_savevm_state_complete_precopy(ms->file, true);
+ qemu_savevm_state_complete_precopy(ms->to_dst_file, true);
/*
* in Finish migrate and with the io-lock held everything should
* will notice we're in POSTCOPY_ACTIVE and not actually
* wrap their state up here
*/
- qemu_file_set_rate_limit(ms->file, INT64_MAX);
+ qemu_file_set_rate_limit(ms->to_dst_file, INT64_MAX);
/* Ping just for debugging, helps line traces up */
- qemu_savevm_send_ping(ms->file, 2);
+ qemu_savevm_send_ping(ms->to_dst_file, 2);
/*
* While loading the device state we may trigger page transfer
qsb = qemu_buf_get(fb);
/* Now send that blob */
- if (qemu_savevm_send_packaged(ms->file, qsb)) {
+ if (qemu_savevm_send_packaged(ms->to_dst_file, qsb)) {
goto fail_closefb;
}
qemu_fclose(fb);
* Although this ping is just for debug, it could potentially be
* used for getting a better measurement of downtime at the source.
*/
- qemu_savevm_send_ping(ms->file, 4);
+ qemu_savevm_send_ping(ms->to_dst_file, 4);
- ret = qemu_file_get_error(ms->file);
+ ret = qemu_file_get_error(ms->to_dst_file);
if (ret) {
error_report("postcopy_start: Migration stream errored");
migrate_set_state(&ms->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
ret = bdrv_inactivate_all();
}
if (ret >= 0) {
- qemu_file_set_rate_limit(s->file, INT64_MAX);
- qemu_savevm_state_complete_precopy(s->file, false);
+ qemu_file_set_rate_limit(s->to_dst_file, INT64_MAX);
+ qemu_savevm_state_complete_precopy(s->to_dst_file, false);
}
}
qemu_mutex_unlock_iothread();
} else if (s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE) {
trace_migration_completion_postcopy_end();
- qemu_savevm_state_complete_postcopy(s->file);
+ qemu_savevm_state_complete_postcopy(s->to_dst_file);
trace_migration_completion_postcopy_end_after_complete();
}
}
}
- if (qemu_file_get_error(s->file)) {
+ if (qemu_file_get_error(s->to_dst_file)) {
trace_migration_completion_file_err();
goto fail;
}
rcu_register_thread();
- qemu_savevm_state_header(s->file);
+ qemu_savevm_state_header(s->to_dst_file);
if (migrate_postcopy_ram()) {
/* Now tell the dest that it should open its end so it can reply */
- qemu_savevm_send_open_return_path(s->file);
+ qemu_savevm_send_open_return_path(s->to_dst_file);
/* And do a ping that will make stuff easier to debug */
- qemu_savevm_send_ping(s->file, 1);
+ qemu_savevm_send_ping(s->to_dst_file, 1);
/*
* Tell the destination that we *might* want to do postcopy later;
* if the other end can't do postcopy it should fail now, nice and
* early.
*/
- qemu_savevm_send_postcopy_advise(s->file);
+ qemu_savevm_send_postcopy_advise(s->to_dst_file);
}
- qemu_savevm_state_begin(s->file, &s->params);
+ qemu_savevm_state_begin(s->to_dst_file, &s->params);
s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
current_active_state = MIGRATION_STATUS_ACTIVE;
int64_t current_time;
uint64_t pending_size;
- if (!qemu_file_rate_limit(s->file)) {
+ if (!qemu_file_rate_limit(s->to_dst_file)) {
uint64_t pend_post, pend_nonpost;
- qemu_savevm_state_pending(s->file, max_size, &pend_nonpost,
+ qemu_savevm_state_pending(s->to_dst_file, max_size, &pend_nonpost,
&pend_post);
pending_size = pend_nonpost + pend_post;
trace_migrate_pending(pending_size, max_size,
continue;
}
/* Just another iteration step */
- qemu_savevm_state_iterate(s->file, entered_postcopy);
+ qemu_savevm_state_iterate(s->to_dst_file, entered_postcopy);
} else {
trace_migration_thread_low_pending(pending_size);
migration_completion(s, current_active_state,
}
}
- if (qemu_file_get_error(s->file)) {
+ if (qemu_file_get_error(s->to_dst_file)) {
migrate_set_state(&s->state, current_active_state,
MIGRATION_STATUS_FAILED);
trace_migration_thread_file_err();
}
current_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
if (current_time >= initial_time + BUFFER_DELAY) {
- uint64_t transferred_bytes = qemu_ftell(s->file) - initial_bytes;
+ uint64_t transferred_bytes = qemu_ftell(s->to_dst_file) -
+ initial_bytes;
uint64_t time_spent = current_time - initial_time;
double bandwidth = (double)transferred_bytes / time_spent;
max_size = bandwidth * migrate_max_downtime() / 1000000;
- s->mbps = time_spent ? (((double) transferred_bytes * 8.0) /
- ((double) time_spent / 1000.0)) / 1000.0 / 1000.0 : -1;
+ s->mbps = (((double) transferred_bytes * 8.0) /
+ ((double) time_spent / 1000.0)) / 1000.0 / 1000.0;
trace_migrate_transferred(transferred_bytes, time_spent,
bandwidth, max_size);
s->expected_downtime = s->dirty_bytes_rate / bandwidth;
}
- qemu_file_reset_rate_limit(s->file);
+ qemu_file_reset_rate_limit(s->to_dst_file);
initial_time = current_time;
- initial_bytes = qemu_ftell(s->file);
+ initial_bytes = qemu_ftell(s->to_dst_file);
}
- if (qemu_file_rate_limit(s->file)) {
+ if (qemu_file_rate_limit(s->to_dst_file)) {
/* usleep expects microseconds */
g_usleep((initial_time + BUFFER_DELAY - current_time)*1000);
}
qemu_mutex_lock_iothread();
qemu_savevm_state_cleanup();
if (s->state == MIGRATION_STATUS_COMPLETED) {
- uint64_t transferred_bytes = qemu_ftell(s->file);
+ uint64_t transferred_bytes = qemu_ftell(s->to_dst_file);
s->total_time = end_time - s->total_time;
if (!entered_postcopy) {
s->downtime = end_time - start_time;
s->expected_downtime = max_downtime/1000000;
s->cleanup_bh = qemu_bh_new(migrate_fd_cleanup, s);
- qemu_file_set_rate_limit(s->file,
+ qemu_file_set_rate_limit(s->to_dst_file,
s->bandwidth_limit / XFER_LIMIT_RATIO);
/* Notify before starting migration thread */
projects / mirror_qemu.git / blobdiff