* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
+#include "qemu/osdep.h"
#include <zlib.h>
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "qemu/coroutine.h"
#include "migration/migration.h"
#include "migration/qemu-file.h"
-#include "migration/qemu-file-internal.h"
#include "trace.h"
+#define IO_BUF_SIZE 32768
+#define MAX_IOV_SIZE MIN(IOV_MAX, 64)
+
+struct QEMUFile {
+ const QEMUFileOps *ops;
+ const QEMUFileHooks *hooks;
+ void *opaque;
+
+ int64_t bytes_xfer;
+ int64_t xfer_limit;
+
+ int64_t pos; /* start of buffer when writing, end of buffer
+ when reading */
+ int buf_index;
+ int buf_size; /* 0 when writing */
+ uint8_t buf[IO_BUF_SIZE];
+
+ struct iovec iov[MAX_IOV_SIZE];
+ unsigned int iovcnt;
+
+ int last_error;
+};
+
/*
* Stop a file from being read/written - not all backing files can do this
* typically only sockets can.
return f;
}
+
+void qemu_file_set_hooks(QEMUFile *f, const QEMUFileHooks *hooks)
+{
+ f->hooks = hooks;
+}
+
/*
* Get last error for stream f
*
bool qemu_file_is_writable(QEMUFile *f)
{
- return f->ops->writev_buffer || f->ops->put_buffer;
+ return f->ops->writev_buffer;
}
/**
* Flushes QEMUFile buffer
*
* If there is writev_buffer QEMUFileOps it uses it otherwise uses
- * put_buffer ops.
+ * put_buffer ops. This will flush all pending data. If data was
+ * only partially flushed, it will set an error state.
*/
void qemu_fflush(QEMUFile *f)
{
ssize_t ret = 0;
+ ssize_t expect = 0;
if (!qemu_file_is_writable(f)) {
return;
}
- if (f->ops->writev_buffer) {
- if (f->iovcnt > 0) {
- ret = f->ops->writev_buffer(f->opaque, f->iov, f->iovcnt, f->pos);
- }
- } else {
- if (f->buf_index > 0) {
- ret = f->ops->put_buffer(f->opaque, f->buf, f->pos, f->buf_index);
- }
+ if (f->iovcnt > 0) {
+ expect = iov_size(f->iov, f->iovcnt);
+ ret = f->ops->writev_buffer(f->opaque, f->iov, f->iovcnt, f->pos);
}
+
if (ret >= 0) {
f->pos += ret;
}
+ /* We expect the QEMUFile write impl to send the full
+ * data set we requested, so sanity check that.
+ */
+ if (ret != expect) {
+ qemu_file_set_error(f, ret < 0 ? ret : -EIO);
+ }
f->buf_index = 0;
f->iovcnt = 0;
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- }
}
void ram_control_before_iterate(QEMUFile *f, uint64_t flags)
{
int ret = 0;
- if (f->ops->before_ram_iterate) {
- ret = f->ops->before_ram_iterate(f, f->opaque, flags, NULL);
+ if (f->hooks && f->hooks->before_ram_iterate) {
+ ret = f->hooks->before_ram_iterate(f, f->opaque, flags, NULL);
if (ret < 0) {
qemu_file_set_error(f, ret);
}
{
int ret = 0;
- if (f->ops->after_ram_iterate) {
- ret = f->ops->after_ram_iterate(f, f->opaque, flags, NULL);
+ if (f->hooks && f->hooks->after_ram_iterate) {
+ ret = f->hooks->after_ram_iterate(f, f->opaque, flags, NULL);
if (ret < 0) {
qemu_file_set_error(f, ret);
}
{
int ret = -EINVAL;
- if (f->ops->hook_ram_load) {
- ret = f->ops->hook_ram_load(f, f->opaque, flags, data);
+ if (f->hooks && f->hooks->hook_ram_load) {
+ ret = f->hooks->hook_ram_load(f, f->opaque, flags, data);
if (ret < 0) {
qemu_file_set_error(f, ret);
}
ram_addr_t offset, size_t size,
uint64_t *bytes_sent)
{
- if (f->ops->save_page) {
- int ret = f->ops->save_page(f, f->opaque, block_offset,
- offset, size, bytes_sent);
+ if (f->hooks && f->hooks->save_page) {
+ int ret = f->hooks->save_page(f, f->opaque, block_offset,
+ offset, size, bytes_sent);
if (ret != RAM_SAVE_CONTROL_DELAYED) {
if (bytes_sent && *bytes_sent > 0) {
return len;
}
-int qemu_get_fd(QEMUFile *f)
-{
- if (f->ops->get_fd) {
- return f->ops->get_fd(f->opaque);
- }
- return -1;
-}
-
void qemu_update_position(QEMUFile *f, size_t size)
{
f->pos += size;
void qemu_put_buffer_async(QEMUFile *f, const uint8_t *buf, size_t size)
{
- if (!f->ops->writev_buffer) {
- qemu_put_buffer(f, buf, size);
- return;
- }
-
if (f->last_error) {
return;
}
}
memcpy(f->buf + f->buf_index, buf, l);
f->bytes_xfer += l;
- if (f->ops->writev_buffer) {
- add_to_iovec(f, f->buf + f->buf_index, l);
- }
+ add_to_iovec(f, f->buf + f->buf_index, l);
f->buf_index += l;
if (f->buf_index == IO_BUF_SIZE) {
qemu_fflush(f);
f->buf[f->buf_index] = v;
f->bytes_xfer++;
- if (f->ops->writev_buffer) {
- add_to_iovec(f, f->buf + f->buf_index, 1);
- }
+ add_to_iovec(f, f->buf + f->buf_index, 1);
f->buf_index++;
if (f->buf_index == IO_BUF_SIZE) {
qemu_fflush(f);
int64_t ret = f->pos;
int i;
- if (f->ops->writev_buffer) {
- for (i = 0; i < f->iovcnt; i++) {
- ret += f->iov[i].iov_len;
- }
- } else {
- ret += f->buf_index;
+ for (i = 0; i < f->iovcnt; i++) {
+ ret += f->iov[i].iov_len;
}
return ret;
return v;
}
-/* compress size bytes of data start at p with specific compression
+/* Compress size bytes of data start at p with specific compression
* level and store the compressed data to the buffer of f.
+ *
+ * When f is not writable, return -1 if f has no space to save the
+ * compressed data.
+ * When f is wirtable and it has no space to save the compressed data,
+ * do fflush first, if f still has no space to save the compressed
+ * data, return -1.
*/
ssize_t qemu_put_compression_data(QEMUFile *f, const uint8_t *p, size_t size,
ssize_t blen = IO_BUF_SIZE - f->buf_index - sizeof(int32_t);
if (blen < compressBound(size)) {
- return 0;
+ if (!qemu_file_is_writable(f)) {
+ return -1;
+ }
+ qemu_fflush(f);
+ blen = IO_BUF_SIZE - sizeof(int32_t);
+ if (blen < compressBound(size)) {
+ return -1;
+ }
}
if (compress2(f->buf + f->buf_index + sizeof(int32_t), (uLongf *)&blen,
(Bytef *)p, size, level) != Z_OK) {
return 0;
}
qemu_put_be32(f, blen);
+ if (f->ops->writev_buffer) {
+ add_to_iovec(f, f->buf + f->buf_index, blen);
+ }
f->buf_index += blen;
+ if (f->buf_index == IO_BUF_SIZE) {
+ qemu_fflush(f);
+ }
return blen + sizeof(int32_t);
}
*/
void qemu_file_set_blocking(QEMUFile *f, bool block)
{
- if (block) {
- qemu_set_block(qemu_get_fd(f));
- } else {
- qemu_set_nonblock(qemu_get_fd(f));
+ if (f->ops->set_blocking) {
+ f->ops->set_blocking(f->opaque, block);
}
}
projects / mirror_qemu.git / blobdiff