#include "qemu/thread.h"
#include "block/qapi.h"
#include "qapi/qapi-commands.h"
-#include "qapi/qapi-events.h"
+#include "qapi/qapi-emit-events.h"
#include "qapi/error.h"
#include "qapi/qmp-event.h"
#include "qapi/qapi-introspect.h"
/* Protects mon_list, monitor_qapi_event_state, monitor_destroyed. */
static QemuMutex monitor_lock;
static GHashTable *monitor_qapi_event_state;
-static QTAILQ_HEAD(mon_list, Monitor) mon_list;
+static QTAILQ_HEAD(, Monitor) mon_list;
static bool monitor_destroyed;
/* Protects mon_fdsets */
static QemuMutex mon_fdsets_lock;
-static QLIST_HEAD(mon_fdsets, MonFdset) mon_fdsets;
+static QLIST_HEAD(, MonFdset) mon_fdsets;
static int mon_refcount;
qemu_mutex_unlock(&monitor_lock);
}
-static void
-monitor_qapi_event_queue(QAPIEvent event, QDict *qdict)
+void qapi_event_emit(QAPIEvent event, QDict *qdict)
{
/*
* monitor_qapi_event_queue_no_reenter() is not reentrant: it
{
monitor_qapi_event_state = g_hash_table_new(qapi_event_throttle_hash,
qapi_event_throttle_equal);
- qmp_event_set_func_emit(monitor_qapi_event_queue);
}
static void handle_hmp_command(Monitor *mon, const char *cmdline);
EventInfoList *qmp_query_events(Error **errp)
{
+ /*
+ * TODO This deprecated command is the only user of
+ * QAPIEvent_str() and QAPIEvent_lookup[]. When the command goes,
+ * they should go, too.
+ */
EventInfoList *info, *ev_list = NULL;
QAPIEvent e;
*ret_data = qobject_from_qlit(&qmp_schema_qlit);
}
-/*
- * We used to define commands in qmp-commands.hx in addition to the
- * QAPI schema. This permitted defining some of them only in certain
- * configurations. query-commands has always reflected that (good,
- * because it lets QMP clients figure out what's actually available),
- * while query-qmp-schema never did (not so good). This function is a
- * hack to keep the configuration-specific commands defined exactly as
- * before, even though qmp-commands.hx is gone.
- *
- * FIXME Educate the QAPI schema on configuration-specific commands,
- * and drop this hack.
- */
-static void qmp_unregister_commands_hack(void)
-{
-#ifndef CONFIG_REPLICATION
- qmp_unregister_command(&qmp_commands, "xen-set-replication");
- qmp_unregister_command(&qmp_commands, "query-xen-replication-status");
- qmp_unregister_command(&qmp_commands, "xen-colo-do-checkpoint");
-#endif
-#ifndef TARGET_I386
- qmp_unregister_command(&qmp_commands, "rtc-reset-reinjection");
- qmp_unregister_command(&qmp_commands, "query-sev");
- qmp_unregister_command(&qmp_commands, "query-sev-launch-measure");
- qmp_unregister_command(&qmp_commands, "query-sev-capabilities");
-#endif
-#ifndef TARGET_S390X
- qmp_unregister_command(&qmp_commands, "dump-skeys");
-#endif
-#ifndef TARGET_ARM
- qmp_unregister_command(&qmp_commands, "query-gic-capabilities");
-#endif
-#if !defined(TARGET_S390X) && !defined(TARGET_I386)
- qmp_unregister_command(&qmp_commands, "query-cpu-model-expansion");
-#endif
-#if !defined(TARGET_S390X)
- qmp_unregister_command(&qmp_commands, "query-cpu-model-baseline");
- qmp_unregister_command(&qmp_commands, "query-cpu-model-comparison");
-#endif
-#if !defined(TARGET_PPC) && !defined(TARGET_ARM) && !defined(TARGET_I386) \
- && !defined(TARGET_S390X)
- qmp_unregister_command(&qmp_commands, "query-cpu-definitions");
-#endif
-}
-
static void monitor_init_qmp_commands(void)
{
/*
qmp_register_command(&qmp_commands, "netdev_add", qmp_netdev_add,
QCO_NO_OPTIONS);
- qmp_unregister_commands_hack();
-
QTAILQ_INIT(&qmp_cap_negotiation_commands);
qmp_register_command(&qmp_cap_negotiation_commands, "qmp_capabilities",
qmp_marshal_qmp_capabilities, QCO_ALLOW_PRECONFIG);
if (l > line_size)
l = line_size;
if (is_physical) {
- cpu_physical_memory_read(addr, buf, l);
+ AddressSpace *as = cs ? cs->as : &address_space_memory;
+ MemTxResult r = address_space_read(as, addr,
+ MEMTXATTRS_UNSPECIFIED, buf, l);
+ if (r != MEMTX_OK) {
+ monitor_printf(mon, " Cannot access memory\n");
+ break;
+ }
} else {
if (cpu_memory_rw_debug(cs, addr, buf, l, 0) < 0) {
monitor_printf(mon, " Cannot access memory\n");
{
int ret;
uint64_t val;
- char *end;
+ const char *end;
while (qemu_isspace(*p)) {
p++;
void monitor_cleanup(void)
{
- Monitor *mon, *next;
-
/*
* We need to explicitly stop the I/O thread (but not destroy it),
* clean up the monitor resources, then destroy the I/O thread since
/* Flush output buffers and destroy monitors */
qemu_mutex_lock(&monitor_lock);
monitor_destroyed = true;
- QTAILQ_FOREACH_SAFE(mon, &mon_list, entry, next) {
+ while (!QTAILQ_EMPTY(&mon_list)) {
+ Monitor *mon = QTAILQ_FIRST(&mon_list);
QTAILQ_REMOVE(&mon_list, mon, entry);
/* Permit QAPI event emission from character frontend release */
qemu_mutex_unlock(&monitor_lock);
},
};
-#ifndef TARGET_I386
-void qmp_rtc_reset_reinjection(Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "rtc-reset-reinjection");
-}
-
-SevInfo *qmp_query_sev(Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "query-sev");
- return NULL;
-}
-
-SevLaunchMeasureInfo *qmp_query_sev_launch_measure(Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "query-sev-launch-measure");
- return NULL;
-}
-
-SevCapability *qmp_query_sev_capabilities(Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "query-sev-capabilities");
- return NULL;
-}
-#endif
-
-#ifndef TARGET_S390X
-void qmp_dump_skeys(const char *filename, Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "dump-skeys");
-}
-#endif
-
-#ifndef TARGET_ARM
-GICCapabilityList *qmp_query_gic_capabilities(Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "query-gic-capabilities");
- return NULL;
-}
-#endif
-
HotpluggableCPUList *qmp_query_hotpluggable_cpus(Error **errp)
{
MachineState *ms = MACHINE(qdev_get_machine());
projects / mirror_qemu.git / blobdiff