"Maximum time(ms) to wait for probe response"
" before disconnecting (reason 4).");
-/*
- * Weight given to the latest Beacon frame when calculating average signal
- * strength for Beacon frames received in the current BSS. This must be
- * between 1 and 15.
- */
-#define IEEE80211_SIGNAL_AVE_WEIGHT 3
-
/*
* How many Beacon frames need to have been used in average signal strength
* before starting to indicate signal change events.
void ieee80211_send_nullfunc(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
- int powersave)
+ bool powersave)
{
struct sk_buff *skb;
struct ieee80211_hdr_3addr *nullfunc;
msecs_to_jiffies(conf->dynamic_ps_timeout));
} else {
if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
- ieee80211_send_nullfunc(local, sdata, 1);
+ ieee80211_send_nullfunc(local, sdata, true);
if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
msecs_to_jiffies(
local->hw.conf.dynamic_ps_timeout));
} else {
- ieee80211_send_nullfunc(local, sdata, 1);
+ ieee80211_send_nullfunc(local, sdata, true);
/* Flush to get the tx status of nullfunc frame */
ieee80211_flush_queues(local, sdata, false);
}
if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
ifmgd->nullfunc_failed = false;
- ieee80211_send_nullfunc(sdata->local, sdata, 0);
+ ieee80211_send_nullfunc(sdata->local, sdata, false);
} else {
int ssid_len;
/* Track average RSSI from the Beacon frames of the current AP */
if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
- ifmgd->ave_beacon_signal = rx_status->signal * 16;
+ ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
ifmgd->last_cqm_event_signal = 0;
ifmgd->count_beacon_signal = 1;
ifmgd->last_ave_beacon_signal = 0;
} else {
- ifmgd->ave_beacon_signal =
- (IEEE80211_SIGNAL_AVE_WEIGHT * rx_status->signal * 16 +
- (16 - IEEE80211_SIGNAL_AVE_WEIGHT) *
- ifmgd->ave_beacon_signal) / 16;
ifmgd->count_beacon_signal++;
}
+ ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
+
if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
- int sig = ifmgd->ave_beacon_signal / 16;
+ int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
int last_sig = ifmgd->last_ave_beacon_signal;
struct ieee80211_event event = {
.type = RSSI_EVENT,
if (bss_conf->cqm_rssi_thold &&
ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
!(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
- int sig = ifmgd->ave_beacon_signal / 16;
+ int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
int last_event = ifmgd->last_cqm_event_signal;
int thold = bss_conf->cqm_rssi_thold;
int hyst = bss_conf->cqm_rssi_hyst;
+
if (sig < thold &&
(last_event == 0 || sig < last_event - hyst)) {
ifmgd->last_cqm_event_signal = sig;
len - baselen, false, &elems,
care_about_ies, ncrc);
- if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) {
- bool directed_tim = ieee80211_check_tim(elems.tim,
- elems.tim_len,
- ifmgd->aid);
- if (directed_tim) {
- if (local->hw.conf.dynamic_ps_timeout > 0) {
- if (local->hw.conf.flags & IEEE80211_CONF_PS) {
- local->hw.conf.flags &= ~IEEE80211_CONF_PS;
- ieee80211_hw_config(local,
- IEEE80211_CONF_CHANGE_PS);
- }
- ieee80211_send_nullfunc(local, sdata, 0);
- } else if (!local->pspolling && sdata->u.mgd.powersave) {
- local->pspolling = true;
-
- /*
- * Here is assumed that the driver will be
- * able to send ps-poll frame and receive a
- * response even though power save mode is
- * enabled, but some drivers might require
- * to disable power save here. This needs
- * to be investigated.
- */
- ieee80211_send_pspoll(local, sdata);
+ if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
+ ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) {
+ if (local->hw.conf.dynamic_ps_timeout > 0) {
+ if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+ local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+ ieee80211_hw_config(local,
+ IEEE80211_CONF_CHANGE_PS);
}
+ ieee80211_send_nullfunc(local, sdata, false);
+ } else if (!local->pspolling && sdata->u.mgd.powersave) {
+ local->pspolling = true;
+
+ /*
+ * Here is assumed that the driver will be
+ * able to send ps-poll frame and receive a
+ * response even though power save mode is
+ * enabled, but some drivers might require
+ * to disable power save here. This needs
+ * to be investigated.
+ */
+ ieee80211_send_pspoll(local, sdata);
}
}
struct ieee80211_supported_band *sband;
struct cfg80211_chan_def chandef;
int ret;
+ u32 i;
+ bool have_80mhz;
sband = local->hw.wiphy->bands[cbss->channel->band];
}
}
+ /* Allow VHT if at least one channel on the sband supports 80 MHz */
+ have_80mhz = false;
+ for (i = 0; i < sband->n_channels; i++) {
+ if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_NO_80MHZ))
+ continue;
+
+ have_80mhz = true;
+ break;
+ }
+
+ if (!have_80mhz)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_cap, ht_oper, vht_oper,
projects / mirror_ubuntu-zesty-kernel.git / blobdiff