memset(¶ms, 0, sizeof(params));
- local->wmm_acm = 0;
+ sdata->wmm_acm = 0;
for (; left >= 4; left -= 4, pos += 4) {
int aci = (pos[0] >> 5) & 0x03;
int acm = (pos[0] >> 4) & 0x01;
case 1: /* AC_BK */
queue = 3;
if (acm)
- local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
+ sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
uapsd = true;
break;
case 2: /* AC_VI */
queue = 1;
if (acm)
- local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
+ sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
uapsd = true;
break;
case 3: /* AC_VO */
queue = 0;
if (acm)
- local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
+ sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
uapsd = true;
break;
default:
queue = 2;
if (acm)
- local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
+ sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
uapsd = true;
break;
params.txop = get_unaligned_le16(pos + 2);
params.uapsd = uapsd;
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- wiphy_debug(local->hw.wiphy,
- "WMM queue=%d aci=%d acm=%d aifs=%d "
- "cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
- queue, aci, acm,
- params.aifs, params.cw_min, params.cw_max,
- params.txop, params.uapsd);
-#endif
+ mlme_dbg(sdata,
+ "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
+ queue, aci, acm,
+ params.aifs, params.cw_min, params.cw_max,
+ params.txop, params.uapsd);
sdata->tx_conf[queue] = params;
if (drv_conf_tx(local, sdata, queue, ¶ms))
- wiphy_debug(local->hw.wiphy,
- "failed to set TX queue parameters for queue %d\n",
- queue);
+ sdata_err(sdata,
+ "failed to set TX queue parameters for queue %d\n",
+ queue);
}
/* enable WMM or activate new settings */
bss_info_changed |= BSS_CHANGED_BEACON_INT;
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
- cbss->capability, bss->has_erp_value, bss->erp_value);
+ bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int));
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
- u8 bssid[ETH_ALEN];
ASSERT_MGD_MTX(ifmgd);
if (WARN_ON(!ifmgd->associated))
return;
- memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
+ ieee80211_stop_poll(sdata);
ifmgd->associated = NULL;
- memset(ifmgd->bssid, 0, ETH_ALEN);
/*
* we need to commit the associated = NULL change because the
netif_carrier_off(sdata->dev);
mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, bssid);
+ sta = sta_info_get(sdata, ifmgd->bssid);
if (sta) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(sta, tx);
/* deauthenticate/disassociate now */
if (tx || frame_buf)
- ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
- tx, frame_buf);
+ ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
+ reason, tx, frame_buf);
/* flush out frame */
if (tx)
drv_flush(local, false);
+ /* clear bssid only after building the needed mgmt frames */
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+
/* remove AP and TDLS peers */
sta_info_flush(local, sdata);
goto out;
}
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (beacon)
- net_dbg_ratelimited("%s: detected beacon loss from AP - sending probe request\n",
- sdata->name);
-#endif
+ mlme_dbg_ratelimited(sdata,
+ "detected beacon loss from AP - sending probe request\n");
+
ieee80211_cqm_rssi_notify(&sdata->vif,
NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL);
memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
- pr_debug("%s: Connection to AP %pM lost\n", sdata->name, bssid);
+ sdata_info(sdata, "Connection to AP %pM lost\n", bssid);
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
return RX_MGMT_NONE;
if (status_code != WLAN_STATUS_SUCCESS) {
- pr_debug("%s: %pM denied authentication (status %d)\n",
- sdata->name, mgmt->sa, status_code);
+ sdata_info(sdata, "%pM denied authentication (status %d)\n",
+ mgmt->sa, status_code);
ieee80211_destroy_auth_data(sdata, false);
return RX_MGMT_CFG80211_RX_AUTH;
}
return RX_MGMT_NONE;
}
- pr_debug("%s: authenticated\n", sdata->name);
+ sdata_info(sdata, "authenticated\n");
ifmgd->auth_data->done = true;
ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
run_again(ifmgd, ifmgd->auth_data->timeout);
goto out_err;
}
if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
- pr_debug("%s: failed moving %pM to auth\n", sdata->name, bssid);
+ sdata_info(sdata, "failed moving %pM to auth\n", bssid);
goto out_err;
}
mutex_unlock(&sdata->local->sta_mtx);
reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
- pr_debug("%s: deauthenticated from %pM (Reason: %u)\n",
- sdata->name, bssid, reason_code);
+ sdata_info(sdata, "deauthenticated from %pM (Reason: %u)\n",
+ bssid, reason_code);
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
- pr_debug("%s: disassociated from %pM (Reason: %u)\n",
- sdata->name, mgmt->sa, reason_code);
+ sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
+ mgmt->sa, reason_code);
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
- pr_debug("%s: invalid AID value 0x%x; bits 15:14 not set\n",
- sdata->name, aid);
+ sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
+ aid);
aid &= ~(BIT(15) | BIT(14));
ifmgd->broken_ap = false;
if (aid == 0 || aid > IEEE80211_MAX_AID) {
- pr_debug("%s: invalid AID value %d (out of range), turn off PS\n",
- sdata->name, aid);
+ sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
+ aid);
aid = 0;
ifmgd->broken_ap = true;
}
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
if (!elems.supp_rates) {
- pr_debug("%s: no SuppRates element in AssocResp\n",
- sdata->name);
+ sdata_info(sdata, "no SuppRates element in AssocResp\n");
return false;
}
if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
if (err) {
- pr_debug("%s: failed to move station %pM to desired state\n",
- sdata->name, sta->sta.addr);
+ sdata_info(sdata,
+ "failed to move station %pM to desired state\n",
+ sta->sta.addr);
WARN_ON(__sta_info_destroy(sta));
mutex_unlock(&sdata->local->sta_mtx);
return false;
status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
- pr_debug("%s: RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
- sdata->name, reassoc ? "Rea" : "A", mgmt->sa,
- capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
+ sdata_info(sdata,
+ "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
+ reassoc ? "Rea" : "A", mgmt->sa,
+ capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
pos = mgmt->u.assoc_resp.variable;
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
u32 tu, ms;
tu = get_unaligned_le32(elems.timeout_int + 1);
ms = tu * 1024 / 1000;
- pr_debug("%s: %pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
- sdata->name, mgmt->sa, tu, ms);
+ sdata_info(sdata,
+ "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
+ mgmt->sa, tu, ms);
assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
if (ms > IEEE80211_ASSOC_TIMEOUT)
run_again(ifmgd, assoc_data->timeout);
*bss = assoc_data->bss;
if (status_code != WLAN_STATUS_SUCCESS) {
- pr_debug("%s: %pM denied association (code=%d)\n",
- sdata->name, mgmt->sa, status_code);
+ sdata_info(sdata, "%pM denied association (code=%d)\n",
+ mgmt->sa, status_code);
ieee80211_destroy_assoc_data(sdata, false);
} else {
- pr_debug("%s: associated\n", sdata->name);
+ sdata_info(sdata, "associated\n");
if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) {
/* oops -- internal error -- send timeout for now */
if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies &&
ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) {
/* got probe response, continue with auth */
- pr_debug("%s: direct probe responded\n", sdata->name);
+ sdata_info(sdata, "direct probe responded\n");
ifmgd->auth_data->tries = 0;
ifmgd->auth_data->timeout = jiffies;
run_again(ifmgd, ifmgd->auth_data->timeout);
}
if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n",
- sdata->name);
-#endif
+ mlme_dbg_ratelimited(sdata,
+ "cancelling probereq poll due to a received beacon\n");
mutex_lock(&local->mtx);
ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
ieee80211_run_deferred_scan(local);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[DEAUTH_DISASSOC_LEN];
- ieee80211_stop_poll(sdata);
-
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
false, frame_buf);
mutex_unlock(&ifmgd->mtx);
auth_data->tries++;
if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
- pr_debug("%s: authentication with %pM timed out\n",
- sdata->name, auth_data->bss->bssid);
+ sdata_info(sdata, "authentication with %pM timed out\n",
+ auth_data->bss->bssid);
/*
* Most likely AP is not in the range so remove the
}
if (auth_data->bss->proberesp_ies) {
- pr_debug("%s: send auth to %pM (try %d/%d)\n",
- sdata->name, auth_data->bss->bssid, auth_data->tries,
- IEEE80211_AUTH_MAX_TRIES);
+ sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
+ auth_data->bss->bssid, auth_data->tries,
+ IEEE80211_AUTH_MAX_TRIES);
auth_data->expected_transaction = 2;
ieee80211_send_auth(sdata, 1, auth_data->algorithm,
} else {
const u8 *ssidie;
- pr_debug("%s: direct probe to %pM (try %d/%i)\n",
- sdata->name, auth_data->bss->bssid, auth_data->tries,
- IEEE80211_AUTH_MAX_TRIES);
+ sdata_info(sdata, "direct probe to %pM (try %d/%i)\n",
+ auth_data->bss->bssid, auth_data->tries,
+ IEEE80211_AUTH_MAX_TRIES);
ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID);
if (!ssidie)
assoc_data->tries++;
if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
- pr_debug("%s: association with %pM timed out\n",
- sdata->name, assoc_data->bss->bssid);
+ sdata_info(sdata, "association with %pM timed out\n",
+ assoc_data->bss->bssid);
/*
* Most likely AP is not in the range so remove the
return -ETIMEDOUT;
}
- pr_debug("%s: associate with %pM (try %d/%d)\n",
- sdata->name, assoc_data->bss->bssid, assoc_data->tries,
- IEEE80211_ASSOC_MAX_TRIES);
+ sdata_info(sdata, "associate with %pM (try %d/%d)\n",
+ assoc_data->bss->bssid, assoc_data->tries,
+ IEEE80211_ASSOC_MAX_TRIES);
ieee80211_send_assoc(sdata);
assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
ieee80211_reset_ap_probe(sdata);
else if (ifmgd->nullfunc_failed) {
if (ifmgd->probe_send_count < max_tries) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- wiphy_debug(local->hw.wiphy,
- "%s: No ack for nullfunc frame to"
- " AP %pM, try %d/%i\n",
- sdata->name, bssid,
- ifmgd->probe_send_count, max_tries);
-#endif
+ mlme_dbg(sdata,
+ "No ack for nullfunc frame to AP %pM, try %d/%i\n",
+ bssid, ifmgd->probe_send_count,
+ max_tries);
ieee80211_mgd_probe_ap_send(sdata);
} else {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- wiphy_debug(local->hw.wiphy,
- "%s: No ack for nullfunc frame to"
- " AP %pM, disconnecting.\n",
- sdata->name, bssid);
-#endif
+ mlme_dbg(sdata,
+ "No ack for nullfunc frame to AP %pM, disconnecting.\n",
+ bssid);
ieee80211_sta_connection_lost(sdata, bssid,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
}
} else if (time_is_after_jiffies(ifmgd->probe_timeout))
run_again(ifmgd, ifmgd->probe_timeout);
else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- wiphy_debug(local->hw.wiphy,
- "%s: Failed to send nullfunc to AP %pM"
- " after %dms, disconnecting.\n",
- sdata->name,
- bssid, probe_wait_ms);
-#endif
+ mlme_dbg(sdata,
+ "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
+ bssid, probe_wait_ms);
ieee80211_sta_connection_lost(sdata, bssid,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
} else if (ifmgd->probe_send_count < max_tries) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- wiphy_debug(local->hw.wiphy,
- "%s: No probe response from AP %pM"
- " after %dms, try %d/%i\n",
- sdata->name,
- bssid, probe_wait_ms,
- ifmgd->probe_send_count, max_tries);
-#endif
+ mlme_dbg(sdata,
+ "No probe response from AP %pM after %dms, try %d/%i\n",
+ bssid, probe_wait_ms,
+ ifmgd->probe_send_count, max_tries);
ieee80211_mgd_probe_ap_send(sdata);
} else {
/*
sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
mutex_lock(&ifmgd->mtx);
if (ifmgd->associated) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- wiphy_debug(sdata->local->hw.wiphy,
- "%s: driver requested disconnect after resume.\n",
- sdata->name);
-#endif
+ mlme_dbg(sdata,
+ "driver requested disconnect after resume\n");
ieee80211_sta_connection_lost(sdata,
ifmgd->associated->bssid,
WLAN_REASON_UNSPECIFIED);
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_bss *bss = (void *)cbss->priv;
- struct sta_info *sta;
+ struct sta_info *sta = NULL;
bool have_sta = false;
int err;
int ht_cfreq;
* since we look at probe response/beacon data here
* it should be OK.
*/
- pr_debug("%s: Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- sdata->name, cbss->channel->center_freq,
- ht_cfreq, ht_oper->primary_chan,
- cbss->channel->band);
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ cbss->channel->center_freq,
+ ht_cfreq, ht_oper->primary_chan,
+ cbss->channel->band);
ht_oper = NULL;
}
}
if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
/* can only fail due to HT40+/- mismatch */
channel_type = NL80211_CHAN_HT20;
- pr_debug("%s: disabling 40 MHz due to multi-vif mismatch\n",
- sdata->name);
+ sdata_info(sdata,
+ "disabling 40 MHz due to multi-vif mismatch\n");
ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
WARN_ON(!ieee80211_set_channel_type(local, sdata,
channel_type));
local->oper_channel = cbss->channel;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
- if (!have_sta) {
+ if (sta) {
u32 rates = 0, basic_rates = 0;
bool have_higher_than_11mbit;
int min_rate = INT_MAX, min_rate_index = -1;
* we can connect -- with a warning.
*/
if (!basic_rates && min_rate_index >= 0) {
- pr_debug("%s: No basic rates, using min rate instead\n",
- sdata->name);
+ sdata_info(sdata,
+ "No basic rates, using min rate instead\n");
basic_rates = BIT(min_rate_index);
}
err = sta_info_insert(sta);
sta = NULL;
if (err) {
- pr_debug("%s: failed to insert STA entry for the AP (error %d)\n",
- sdata->name, err);
+ sdata_info(sdata,
+ "failed to insert STA entry for the AP (error %d)\n",
+ err);
return err;
}
} else
if (ifmgd->associated)
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
- pr_debug("%s: authenticate with %pM\n", sdata->name, req->bss->bssid);
+ sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
err = ieee80211_prep_connection(sdata, req->bss, false);
if (err)
* Wait up to one beacon interval ...
* should this be more if we miss one?
*/
- pr_debug("%s: waiting for beacon from %pM\n",
- sdata->name, ifmgd->bssid);
+ sdata_info(sdata, "waiting for beacon from %pM\n",
+ ifmgd->bssid);
assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
} else {
assoc_data->have_beacon = true;
corrupt_type = "beacon";
} else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
corrupt_type = "probe response";
- pr_debug("%s: associating with AP with corrupt %s\n",
- sdata->name, corrupt_type);
+ sdata_info(sdata, "associating with AP with corrupt %s\n",
+ corrupt_type);
}
err = 0;
return 0;
}
- pr_debug("%s: deauthenticating from %pM by local choice (reason=%d)\n",
- sdata->name, req->bssid, req->reason_code);
+ sdata_info(sdata,
+ "deauthenticating from %pM by local choice (reason=%d)\n",
+ req->bssid, req->reason_code);
if (ifmgd->associated &&
ether_addr_equal(ifmgd->associated->bssid, req->bssid))
return -ENOLINK;
}
- pr_debug("%s: disassociating from %pM by local choice (reason=%d)\n",
- sdata->name, req->bss->bssid, req->reason_code);
+ sdata_info(sdata,
+ "disassociating from %pM by local choice (reason=%d)\n",
+ req->bss->bssid, req->reason_code);
memcpy(bssid, req->bss->bssid, ETH_ALEN);
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
projects / mirror_ubuntu-artful-kernel.git / blobdiff