zebra: Allow ns delete to happen after under/over flow checks

[mirror_frr.git] / pimd / README

diff --git a/pimd/README b/pimd/README
index 9f7776fb459474b23ede6a253ed0a4a06c926db3..3d03979a9a725e2f7c27b6e30ff06e009389ba02 100644 (file)
--- a/pimd/README
+++ b/pimd/README
@@ -1,21 +1,17 @@
-#
-#
-
 INTRODUCTION
 
         qpimd aims to implement a PIM (Protocol Independent Multicast)
-       daemon for the Quagga Routing Suite.
+       daemon for the FRR Routing Suite.
 
-       Initially qpimd targets only PIM SSM (Source-Specific
-       Multicast) mode as defined in section 4.8.2 (PIM-SSM-Only
-       Routers) of RFC 4601.
+       qpimd implements PIM-SM (Sparse Mode) of RFC 4601.
+        Additionally MSDP has been implemented.
 
        In order to deliver end-to-end multicast routing control
-       plane, qpimd includes the router-side of IGMPv3 (RFC 3376).
+       plane, qpimd includes the router-side of IGMPv[2|3] (RFC 3376).
 
 LICENSE
 
-        qpimd - pimd for quagga
+        qpimd - pimd for FRR
         Copyright (C) 2008 Everton da Silva Marques
 
         qpimd is free software; you can redistribute it and/or modify
@@ -37,78 +33,16 @@ HOME SITE
 
         qpimd lives at:
 
-        https://github.com/udhos/qpimd
+        https://github.com/freerangerouting/frr
 
 PLATFORMS
 
-       qpimd has been tested with Debian Lenny under Linux 2.6.
+       qpimd has been tested with Debian Jessie.
 
 REQUIREMENTS
 
-       qpimd requires Quagga (0.99.11 or higher from http://www.quagga.net)
-
-       The GNU Build System (Autotools) is required to build from
-       source code repository.
-
-       gawk is also needed to build with Autotools. Any other awk
-       usually won't work.
-
-BUILDING FROM QUAGGA GIT REPOSITORY
-
-       1) Get the latest quagga source tree
-
-       # git clone git://code.quagga.net/quagga.git quagga
-
-       2) Apply qpimd patch into quagga source tree
-
-       # patch -p1 -d quagga < pimd-0.153-quagga-git20090623.patch
-
-       3) Compile and install quagga
-
-       # cd quagga
-       # ./bootstrap.sh
-       # ./configure --prefix=/usr/local/quagga --enable-pimd
-       # make
-       # make install
-
-BUILDING FROM QUAGGA TARBALL
-
-       1) Get the latest quagga tarball
-
-       # wget http://www.quagga.net/download/quagga-0.99.13.tar.gz
-
-       2) Unpack the quagga tarball
-
-       # tar xzf quagga-0.99.13.tar.gz
-
-       3) Apply qpimd patch into quagga source tree
-
-       # patch -p1 -d quagga-0.99.13 < pimd-0.153-quagga-0.99.13.patch
-
-       4) Compile and install quagga
-
-       # cd quagga-0.99.13
-       # ./configure --prefix=/usr/local/quagga --enable-pimd
-       # make
-       # make install
-
-USAGE
-
-       1) Configure and start the zebra daemon
-
-       # cp /usr/local/quagga/etc/zebra.conf.sample /usr/local/quagga/etc/zebra.conf
-       # vi /usr/local/quagga/etc/zebra.conf
-       # /usr/local/quagga/sbin/zebra
-
-       2) Configure and start the pimd daemon
-
-       # cp /usr/local/quagga/etc/pimd.conf.sample /usr/local/quagga/etc/pimd.conf
-       # vi /usr/local/quagga/etc/pimd.conf
-       # /usr/local/quagga/sbin/pimd
-
-       3) Access pimd vty interface at port TCP 2611
+       qpimd requires FRR (2.0 or higher)
 
-       # telnet localhost 2611
 
 CONFIGURATION COMMANDS
 
@@ -123,7 +57,7 @@ SUPPORT
        Please post comments, questions, patches, bug reports at the
        support site:
 
-        https://github.com/udhos/qpimd
+        https://freerangerouting/frr
 
 RELATED WORK