-#
-# $QuaggaId: $Format:%an, %ai, %h$ $
-#
-
INTRODUCTION
qpimd aims to implement a PIM (Protocol Independent Multicast)
- daemon for the Quagga Routing Suite.
+ daemon for the FRR Routing Suite.
- Initially qpimd targets only PIM SSM (Source-Specific
- Multicast) mode as defined in section 4.8.2 (PIM-SSM-Only
- Routers) of RFC 4601.
+ qpimd implements PIM-SM (Sparse Mode) of RFC 4601.
+ Additionally MSDP has been implemented.
In order to deliver end-to-end multicast routing control
- plane, qpimd includes the router-side of IGMPv3 (RFC 3376).
+ plane, qpimd includes the router-side of IGMPv[2|3] (RFC 3376).
LICENSE
- qpimd - pimd for quagga
+ qpimd - pimd for FRR
Copyright (C) 2008 Everton da Silva Marques
qpimd is free software; you can redistribute it and/or modify
qpimd lives at:
- https://github.com/udhos/qpimd
+ https://github.com/freerangerouting/frr
PLATFORMS
- qpimd has been tested with Debian Lenny under Linux 2.6.
+ qpimd has been tested with Debian Jessie.
REQUIREMENTS
- qpimd requires Quagga (0.99.11 or higher from http://www.quagga.net)
-
- The GNU Build System (Autotools) is required to build from
- source code repository.
-
- gawk is also needed to build with Autotools. Any other awk
- usually won't work.
-
-BUILDING FROM QUAGGA GIT REPOSITORY
-
- 1) Get the latest quagga source tree
-
- # git clone git://code.quagga.net/quagga.git quagga
-
- 2) Apply qpimd patch into quagga source tree
-
- # patch -p1 -d quagga < pimd-0.153-quagga-git20090623.patch
-
- 3) Compile and install quagga
-
- # cd quagga
- # ./bootstrap.sh
- # ./configure --prefix=/usr/local/quagga --enable-pimd
- # make
- # make install
-
-BUILDING FROM QUAGGA TARBALL
-
- 1) Get the latest quagga tarball
-
- # wget http://www.quagga.net/download/quagga-0.99.13.tar.gz
-
- 2) Unpack the quagga tarball
-
- # tar xzf quagga-0.99.13.tar.gz
-
- 3) Apply qpimd patch into quagga source tree
-
- # patch -p1 -d quagga-0.99.13 < pimd-0.153-quagga-0.99.13.patch
-
- 4) Compile and install quagga
-
- # cd quagga-0.99.13
- # ./configure --prefix=/usr/local/quagga --enable-pimd
- # make
- # make install
-
-USAGE
-
- 1) Configure and start the zebra daemon
-
- # cp /usr/local/quagga/etc/zebra.conf.sample /usr/local/quagga/etc/zebra.conf
- # vi /usr/local/quagga/etc/zebra.conf
- # /usr/local/quagga/sbin/zebra
-
- 2) Configure and start the pimd daemon
-
- # cp /usr/local/quagga/etc/pimd.conf.sample /usr/local/quagga/etc/pimd.conf
- # vi /usr/local/quagga/etc/pimd.conf
- # /usr/local/quagga/sbin/pimd
-
- 3) Access pimd vty interface at port TCP 2611
+ qpimd requires FRR (2.0 or higher)
- # telnet localhost 2611
CONFIGURATION COMMANDS
Please post comments, questions, patches, bug reports at the
support site:
- https://github.com/udhos/qpimd
+ https://freerangerouting/frr
RELATED WORK