use strict;
use warnings;
-$ENV{DEBIAN_FRONTEND} = 'noninteractive';
-$ENV{LC_ALL} = 'C';
-
-use Getopt::Long;
-use IPC::Open2;
-use IO::File;
-use Cwd 'abs_path';
-use Glib;
-use Gtk3 '-init';
-use Gtk3::WebKit2;
-use Encode;
-use File::Basename;
-use File::Path;
-use Time::HiRes;
-use POSIX ":sys_wait_h";
-
-use Proxmox::Install::Env;
-use Proxmox::Log;
-use Proxmox::Sys::Command qw(run_command syscmd);
-use Proxmox::Sys::File qw(file_read_firstline file_read_all file_write_all);
-use Proxmox::Sys::Net qw(parse_ip_address parse_ip_mask);
-
-if (!$ENV{G_SLICE} || $ENV{G_SLICE} ne "always-malloc") {
- die "do not use slice allocator (run with 'G_SLICE=always-malloc ./proxinstall ...')\n";
-}
-
-my $test_image;
-GetOptions(
- 'test-image|t=s' => \$test_image
-) or die "usage error\n";
-
-Proxmox::Install::Env::enable_test_mode() if $test_image;
-
-$ENV{'LVM_SUPPRESS_FD_WARNINGS'} = '1';
-
-my ($setup, $cd_info) = Proxmox::Install::Env::setup();
-
-my $zfstestpool = "test_rpool";
-my $zfspoolname = is_test_mode() ? $zfstestpool : 'rpool';
-my $zfsrootvolname = "$setup->{product}-1";
-
-my $storage_cfg_zfs = <<__EOD__;
-dir: local
- path /var/lib/vz
- content iso,vztmpl,backup
-
-zfspool: local-zfs
- pool $zfspoolname/data
- sparse
- content images,rootdir
-__EOD__
-
-my $storage_cfg_btrfs = <<__EOD__;
-dir: local
- path /var/lib/vz
- content iso,vztmpl,backup
- disable
-
-btrfs: local-btrfs
- path /var/lib/pve/local-btrfs
- content iso,vztmpl,backup,images,rootdir
-__EOD__
-
-my $storage_cfg_lvmthin = <<__EOD__;
-dir: local
- path /var/lib/vz
- content iso,vztmpl,backup
-
-lvmthin: local-lvm
- thinpool data
- vgname pve
- content rootdir,images
-__EOD__
-
-my $storage_cfg_local = <<__EOD__;
-dir: local
- path /var/lib/vz
- content iso,vztmpl,backup,rootdir,images
-__EOD__
-
-Proxmox::Log::init("/tmp/install.log");
-
-my $proxmox_libdir = is_test_mode()
- ? Cwd::cwd() . "/testdir/var/lib/proxmox-installer"
- : "/var/lib/proxmox-installer"
- ;
-my $proxmox_cddir = is_test_mode() ? "../pve-cd-builder/tmp/data-gz/" : "/cdrom";
-my $proxmox_pkgdir = "${proxmox_cddir}/proxmox/packages/";
-
-my $boot_type = -d '/sys/firmware/efi' ? 'efi' : 'bios';
-
-my $step_number = 0; # Init number for global function list
-
-my @steps = (
- {
- step => 'intro',
- html => 'license.htm',
- next_button => 'I a_gree',
- function => \&create_intro_view,
- },
- {
- step => 'intro',
- html => 'page1.htm',
- function => \&create_hdsel_view,
- },
- {
- step => 'country',
- html => 'country.htm',
- function => \&create_country_view,
- },
- {
- step => 'password',
- html => 'passwd.htm',
- function => \&create_password_view,
- },
- {
- step => 'ipconf',
- html => 'ipconf.htm',
- function => \&create_ipconf_view,
- },
- {
- step => 'ack',
- html => 'ack.htm',
- next_button => '_Install',
- function => \&create_ack_view,
- },
- {
- step => 'extract',
- next_button => '_Reboot',
- function => \&create_extract_view,
- },
-);
-
-# GUI global variables
-my ($window, $cmdbox, $inbox, $htmlview);
-my $prev_btn;
-my ($next, $next_fctn, $target_hd);
-my ($progress, $progress_status);
-
-my ($ipversion, $ipaddress, $cidr, $ipconf_entry_addr);
-my ($netmask, $ipconf_entry_mask);
-my ($gateway, $ipconf_entry_gw);
-my ($dnsserver, $ipconf_entry_dns);
-my $hostname = 'proxmox';
-my $domain = 'domain.tld';
-my $cmdline = file_read_firstline("/proc/cmdline");
-my $ipconf;
-my $country;
-my $timezone = 'Europe/Vienna';
-my $keymap = 'en-us';
-my $password;
-my $mailto = 'mail@example.invalid';
-my $cmap;
-my $autoreboot_seconds = 5;
-
-my $config = {
- # TODO: add all the user-provided options for previous button
- country => $country,
- timezone => $timezone,
- keymap => $keymap,
-
- password => $password,
- mailto => $mailto,
-
- mngmt_nic => undef,
- hostname => $hostname,
- fqdn => undef,
- ipaddress => undef,
- netmask => undef,
- gateway => undef,
-};
-
-# parse command line args
-
-my $config_options = {
- autoreboot => 1,
-};
-
-if ($cmdline =~ m/\s(ext4|xfs)(\s.*)?$/) {
- $config_options->{filesys} = $1;
-} else {
- $config_options->{filesys} = 'ext4';
-}
-
-if ($cmdline =~ m/hdsize=(\d+(\.\d+)?)[\s\n]/i) {
- $config_options->{hdsize} = $1;
-}
-
-if ($cmdline =~ m/swapsize=(\d+(\.\d+)?)[\s\n]/i) {
- $config_options->{swapsize} = $1;
-}
-
-if ($cmdline =~ m/maxroot=(\d+(\.\d+)?)[\s\n]/i) {
- $config_options->{maxroot} = $1;
-}
-
-if ($cmdline =~ m/minfree=(\d+(\.\d+)?)[\s\n]/i) {
- $config_options->{minfree} = $1;
-}
-
-if ($setup->{product} eq 'pve') {
- if ($cmdline =~ m/maxvz=(\d+(\.\d+)?)[\s\n]/i) {
- $config_options->{maxvz} = $1;
- }
-}
-
-my $postfix_main_cf = <<_EOD;
-# See /usr/share/postfix/main.cf.dist for a commented, more complete version
-
-myhostname=__FQDN__
-
-smtpd_banner = \$myhostname ESMTP \$mail_name (Debian/GNU)
-biff = no
-
-# appending .domain is the MUA's job.
-append_dot_mydomain = no
-
-# Uncomment the next line to generate "delayed mail" warnings
-#delay_warning_time = 4h
-
-alias_maps = hash:/etc/aliases
-alias_database = hash:/etc/aliases
-mydestination = \$myhostname, localhost.\$mydomain, localhost
-relayhost =
-mynetworks = 127.0.0.0/8
-inet_interfaces = loopback-only
-recipient_delimiter = +
-
-compatibility_level = 2
-
-_EOD
-
-
-sub detect_country {
-
- print "trying to detect country...\n";
- my $cpid = open2(\*TMP, undef, "traceroute -N 1 -q 1 -n 8.8.8.8");
- return undef if !$cpid;
-
- my $country;
-
- my $previous_alarm = alarm (10);
- eval {
- local $SIG{ALRM} = sub { die "timed out!\n" };
- my $line;
- while (defined ($line = <TMP>)) {
- log_debug("DC TRACEROUTE: $line");
- if ($line =~ m/\s*\d+\s+(\d+\.\d+\.\d+\.\d+)\s/) {
- my $geoip = `geoiplookup $1`;
- log_debug("DC GEOIP: $geoip");
- if ($geoip =~ m/GeoIP Country Edition:\s*([A-Z]+),/) {
- $country = lc ($1);
- log_info("DC FOUND: $country\n");
- last;
- }
- }
- }
- };
-
- my $err = $@;
-
- alarm ($previous_alarm);
-
- close (TMP);
-
- if ($err) {
- print "unable to detect country - $err\n";
- } elsif ($country) {
- print "detected country: " . uc($country) . "\n";
- } else {
- print "unable to detect country\n";
- }
-
- return $country;
-}
-
-sub get_memtotal {
-
- open (my $MEMINFO, '<', '/proc/meminfo');
-
- my $res = 512; # default to 512 if something goes wrong
- while (my $line = <$MEMINFO>) {
- if ($line =~ m/^MemTotal:\s+(\d+)\s*kB/i) {
- $res = int ($1 / 1024);
- }
- }
-
- close($MEMINFO);
-
- return $res;
-}
-
-my $total_memory = get_memtotal();
-
-sub is_same_file {
- my ($a, $b) = @_;
-
- my ($dev_a ,$ino_a) = stat($a);
- my ($dev_b, $ino_b) = stat($b);
-
- return 0 if !($dev_a && $dev_b && $ino_a && $ino_b);
-
- return $ino_a == $ino_b && $dev_a == $dev_b;
-}
-
-sub find_stable_path {
- my ($stabledir, $bdev) = @_;
-
- foreach my $path (<$stabledir/*>) {
- if (is_same_file($path, $bdev)) {
- return wantarray ? ($path, basename($path)) : $path;
- }
- }
-}
-
-sub find_dev_by_uuid {
- my $bdev = shift;
-
- my ($full_path, $name) = find_stable_path("/dev/disk/by-uuid", $bdev);
-
- return $name;
-}
-
-sub hd_list {
-
- my $res = ();
-
- if (is_test_mode()) {
- my @disks = split /,/, $test_image;
-
- for my $disk (@disks) {
- push @$res, [-1, $disk, int((-s $disk)/512), "TESTDISK", 512];
- }
- return $res;
- }
-
- my $count = 0;
-
- foreach my $bd (</sys/block/*>) {
- next if $bd =~ m|^/sys/block/ram\d+$|;
- next if $bd =~ m|^/sys/block/loop\d+$|;
- next if $bd =~ m|^/sys/block/md\d+$|;
- next if $bd =~ m|^/sys/block/dm-.*$|;
- next if $bd =~ m|^/sys/block/fd\d+$|;
- next if $bd =~ m|^/sys/block/sr\d+$|;
-
- my $dev = file_read_firstline("$bd/dev");
- chomp $dev;
-
- next if !$dev;
-
- my $info = `udevadm info --path $bd --query all`;
- next if !$info;
-
- next if $info !~ m/^E: DEVTYPE=disk$/m;
-
- next if $info =~ m/^E: ID_CDROM/m;
- next if $info =~ m/^E: ID_FS_TYPE=iso9660/m;
-
- my ($name) = $info =~ m/^N: (\S+)$/m;
-
- if ($name) {
- my $real_name = "/dev/$name";
-
- my $size = file_read_firstline("$bd/size");
- chomp $size;
- $size = undef if !($size && $size =~ m/^\d+$/);
-
- my $model = file_read_firstline("$bd/device/model") || '';
- $model =~ s/^\s+//;
- $model =~ s/\s+$//;
- if (length ($model) > 30) {
- $model = substr ($model, 0, 30);
- }
-
- my $logical_bsize = file_read_firstline("$bd/queue/logical_block_size") // '';
- chomp $logical_bsize;
- $logical_bsize = undef if !($logical_bsize && $logical_bsize =~ m/^\d+$/);
-
- push @$res, [$count++, $real_name, $size, $model, $logical_bsize] if $size;
- } else {
- print STDERR "ERROR: unable to map device $dev ($bd)\n";
- }
- }
-
- return $res;
-}
-
-sub read_cmap {
- my $countryfn = "${proxmox_libdir}/country.dat";
- open (my $TMP, "<:encoding(utf8)", "$countryfn") || die "unable to open '$countryfn' - $!\n";
- my $line;
- my $country = {};
- my $countryhash = {};
- my $kmap = {};
- my $kmaphash = {};
- while (defined ($line = <$TMP>)) {
- if ($line =~ m|^map:([^\s:]+):([^:]+):([^:]+):([^:]+):([^:]+):([^:]*):$|) {
- $kmap->{$1} = {
- name => $2,
- kvm => $3,
- console => $4,
- x11 => $5,
- x11var => $6,
- };
- $kmaphash->{$2} = $1;
- } elsif ($line =~ m|^([a-z]{2}):([^:]+):([^:]*):([^:]*):$|) {
- $country->{$1} = {
- name => $2,
- kmap => $3,
- mirror => $4,
- };
- $countryhash->{lc($2)} = $1;
- } else {
- warn "unable to parse 'country.dat' line: $line";
- }
- }
- close ($TMP);
- $TMP = undef;
-
- my $zones = {};
- my $cczones = {};
- my $zonefn = "/usr/share/zoneinfo/zone.tab";
- open ($TMP, '<', "$zonefn") || die "unable to open '$zonefn' - $!\n";
- while (defined ($line = <$TMP>)) {
- next if $line =~ m/^\#/;
- next if $line =~ m/^\s*$/;
- if ($line =~ m|^([A-Z][A-Z])\s+\S+\s+(([^/]+)/\S+)\s|) {
- my $cc = lc($1);
- $cczones->{$cc}->{$2} = 1;
- $country->{$cc}->{zone} = $2 if !defined ($country->{$cc}->{zone});
- $zones->{$2} = 1;
-
- }
- }
- close ($TMP);
-
- return {
- zones => $zones,
- cczones => $cczones,
- country => $country,
- countryhash => $countryhash,
- kmap => $kmap,
- kmaphash => $kmaphash,
- }
-}
-
-# search for Harddisks
-my $hds = hd_list();
-
-sub hd_size {
- my ($dev) = @_;
-
- foreach my $hd (@$hds) {
- my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
- # size is always (also for 4kn disks) in 512B "sectors"! convert to KB
- return int($size/2) if $devname eq $dev;
- }
-
- die "no such device '$dev'\n";
-}
-
-sub logical_blocksize {
- my ($dev) = @_;
-
- foreach my $hd (@$hds) {
- my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
- return $logical_bsize if $devname eq $dev;
- }
-
- die "no such device '$dev'\n";
-}
-
-sub get_partition_dev {
- my ($dev, $partnum) = @_;
-
- if ($dev =~ m|^/dev/sd([a-h]?[a-z]\|i[a-v])$|) {
- return "${dev}$partnum";
- } elsif ($dev =~ m|^/dev/xvd[a-z]$|) {
- # Citrix Hypervisor blockdev
- return "${dev}$partnum";
- } elsif ($dev =~ m|^/dev/[hxev]d[a-z]$|) {
- return "${dev}$partnum";
- } elsif ($dev =~ m|^/dev/[^/]+/c\d+d\d+$|) {
- return "${dev}p$partnum";
- } elsif ($dev =~ m|^/dev/[^/]+/d\d+$|) {
- return "${dev}p$partnum";
- } elsif ($dev =~ m|^/dev/[^/]+/hd[a-z]$|) {
- return "${dev}$partnum";
- } elsif ($dev =~ m|^/dev/nvme\d+n\d+$|) {
- return "${dev}p$partnum";
- } else {
- die "unable to get device for partition $partnum on device $dev\n";
- }
-
-}
-
-sub update_progress {
- my ($frac, $start, $end, $text) = @_;
-
- my $part = $end - $start;
- my $res = $start + $frac * $part;
-
- $progress->set_fraction ($res);
- $progress->set_text (sprintf ("%d%%", int ($res*100)));
- $progress_status->set_text ($text) if defined ($text);
-
- display_info() if $res < 0.9;
-
- Gtk3::main_iteration() while Gtk3::events_pending();
-}
-
-my $fssetup = {
- ext4 => {
- mkfs => 'mkfs.ext4 -F',
- mkfs_root_opt => '',
- mkfs_data_opt => '-m 0',
- root_mountopt => 'errors=remount-ro',
- },
- xfs => {
- mkfs => 'mkfs.xfs -f',
- mkfs_root_opt => '',
- mkfs_data_opt => '',
- root_mountopt => '',
- },
-};
-
-sub create_filesystem {
- my ($dev, $name, $type, $start, $end, $fs, $fe) = @_;
-
- my $range = $end - $start;
- my $rs = $start + $range*$fs;
- my $re = $start + $range*$fe;
- my $max = 0;
-
- my $fsdata = $fssetup->{$type} || die "internal error - unknown file system '$type'";
- my $opts = $name eq 'root' ? $fsdata->{mkfs_root_opt} : $fsdata->{mkfs_data_opt};
-
- update_progress(0, $rs, $re, "creating $name filesystem");
-
- run_command("$fsdata->{mkfs} $opts $dev", sub {
- my $line = shift;
-
- if ($line =~ m/Writing inode tables:\s+(\d+)\/(\d+)/) {
- $max = $2;
- } elsif ($max && $line =~ m/(\d+)\/$max/) {
- update_progress(($1/$max)*0.9, $rs, $re);
- } elsif ($line =~ m/Creating journal.*done/) {
- update_progress(0.95, $rs, $re);
- } elsif ($line =~ m/Writing superblocks and filesystem.*done/) {
- update_progress(1, $rs, $re);
- }
- });
-}
-
-sub debconfig_set {
- my ($targetdir, $dcdata) = @_;
-
- my $cfgfile = "/tmp/debconf.txt";
- file_write_all("$targetdir/$cfgfile", $dcdata);
- syscmd("chroot $targetdir debconf-set-selections $cfgfile");
- unlink "$targetdir/$cfgfile";
-}
-
-sub diversion_add {
- my ($targetdir, $cmd, $new_cmd) = @_;
-
- syscmd("chroot $targetdir dpkg-divert --package proxmox --add --rename $cmd") == 0
- || die "unable to exec dpkg-divert\n";
-
- syscmd("ln -sf ${new_cmd} $targetdir/$cmd") == 0
- || die "unable to link diversion to ${new_cmd}\n";
-}
-
-sub diversion_remove {
- my ($targetdir, $cmd) = @_;
-
- syscmd("mv $targetdir/${cmd}.distrib $targetdir/${cmd};") == 0
- || die "unable to remove $cmd diversion\n";
-
- syscmd("chroot $targetdir dpkg-divert --remove $cmd") == 0
- || die "unable to remove $cmd diversion\n";
-}
-
-sub btrfs_create {
- my ($partitions, $mode) = @_;
-
- die "unknown btrfs mode '$mode'"
- if !($mode eq 'single' || $mode eq 'raid0' || $mode eq 'raid1' || $mode eq 'raid10');
-
- my $cmd = ['mkfs.btrfs', '-f'];
-
- push @$cmd, '-d', $mode, '-m', $mode;
-
- push @$cmd, @$partitions;
-
- syscmd($cmd);
-}
-
-sub zfs_create_rpool {
- my ($vdev) = @_;
-
- my $cmd = "zpool create -f -o cachefile=none";
-
- $cmd .= " -o ashift=$config_options->{ashift}"
- if defined($config_options->{ashift});
-
- syscmd("$cmd $zfspoolname $vdev") == 0 ||
- die "unable to create zfs root pool\n";
-
- syscmd("zfs create $zfspoolname/ROOT") == 0 ||
- die "unable to create zfs $zfspoolname/ROOT volume\n";
-
- if ($setup->{product} eq 'pve') {
- syscmd("zfs create $zfspoolname/data") == 0 ||
- die "unable to create zfs $zfspoolname/data volume\n";
- }
-
- syscmd("zfs create $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
- die "unable to create zfs $zfspoolname/ROOT/$zfsrootvolname volume\n";
-
- # default to `relatime` on, fast enough for the installer and production
- syscmd("zfs set atime=on relatime=on $zfspoolname") == 0 ||
- die "unable to set zfs properties\n";
-
- my $value = $config_options->{compress};
- syscmd("zfs set compression=$value $zfspoolname")
- if defined($value) && $value ne 'off';
-
- $value = $config_options->{checksum};
- syscmd("zfs set checksum=$value $zfspoolname")
- if defined($value) && $value ne 'on';
-
- $value = $config_options->{copies};
- syscmd("zfs set copies=$value $zfspoolname")
- if defined($value) && $value != 1;
-}
-
-my $udevadm_trigger_block = sub {
- my ($nowait) = @_;
-
- sleep(1) if !$nowait; # give kernel time to reread part table
-
- # trigger udev to create /dev/disk/by-uuid
- syscmd("udevadm trigger --subsystem-match block");
- syscmd("udevadm settle --timeout 10");
-};
-
-my $clean_disk = sub {
- my ($disk) = @_;
-
- # sort longest first as we need to cleanup depth-first
- my @partitions = sort { length($b) <=> length($a) }
- split("\n", `lsblk --output kname --noheadings --path --list $disk`);
-
- for my $part (@partitions) {
- next if $part eq $disk;
- next if $part !~ /^\Q$disk\E/;
- eval { syscmd("pvremove -ff -y $part"); };
- eval { syscmd("zpool labelclear -f $part"); };
- eval { syscmd("dd if=/dev/zero of=$part bs=1M count=16"); };
- }
- eval { syscmd("wipefs -a " . cmd2string(\@partitions)) };
- warn "$@" if $@;
-};
-
-sub partition_bootable_disk {
- my ($target_dev, $maxhdsizegb, $ptype) = @_;
-
- die "too dangerous" if is_test_mode();
-
- die "unknown partition type '$ptype'"
- if !($ptype eq '8E00' || $ptype eq '8300' || $ptype eq 'BF01');
-
- my $hdsize = hd_size($target_dev); # size in KB (1024 bytes)
-
- # For bigger disks default to generous ESP size to allow users having multiple kernels/UKI's
- my $esp_size = $hdsize > 100 * 1024 * 1024 ? 1024 : 512; # MB
- my $esp_end = $esp_size + 1;
-
- my $restricted_hdsize_mb = 0; # 0 ==> end of partition
- if ($maxhdsizegb) {
- my $maxhdsize = $maxhdsizegb * 1024 * 1024;
- if ($maxhdsize < $hdsize) {
- $hdsize = $maxhdsize;
- $restricted_hdsize_mb = int($hdsize/1024) . 'M';
- }
- }
-
- my $hdgb = int($hdsize/(1024*1024));
-
- my ($hard_limit, $soft_limit) = (2, 8);
-
- die "root disk '$target_dev' too small (${hdgb} GB < $hard_limit GB)\n" if $hdgb < $hard_limit;
- if ($hdgb < $soft_limit) {
- my $response = display_prompt(
- "Root disk space ${hdgb} GB is below recommended minimum space of $soft_limit GB,"
- ." installation might not be successful! Continue?"
- );
- die "root disk '$target_dev' too small (${hdgb} GB < $soft_limit GB), and warning not accepted.\n"
- if $response ne 'ok';
- }
-
-
- syscmd("sgdisk -Z ${target_dev}");
-
- # 1 - BIOS boot partition (Grub Stage2): first free 1 MB
- # 2 - EFI ESP: next free 512 or 1024 MB
- # 3 - OS/Data partition: rest, up to $maxhdsize in MB
-
- my $grubbootdev = get_partition_dev($target_dev, 1);
- my $efibootdev = get_partition_dev($target_dev, 2);
- my $osdev = get_partition_dev ($target_dev, 3);
-
- my $pcmd = ['sgdisk'];
-
- my $pnum = 2;
- push @$pcmd, "-n${pnum}:1M:+${esp_size}M", "-t$pnum:EF00";
-
- $pnum = 3;
- push @$pcmd, "-n${pnum}:${esp_end}M:${restricted_hdsize_mb}", "-t$pnum:$ptype";
-
- push @$pcmd, $target_dev;
-
- my $os_size = $hdsize - $esp_end * 1024; # efi + 1M bios_boot + 1M alignment
-
- syscmd($pcmd) == 0 ||
- die "unable to partition harddisk '${target_dev}'\n";
-
- my $blocksize = logical_blocksize($target_dev);
-
- if ($blocksize != 4096) {
- $pnum = 1;
- $pcmd = ['sgdisk', '-a1', "-n$pnum:34:2047", "-t$pnum:EF02" , $target_dev];
-
- syscmd($pcmd) == 0 ||
- die "unable to create bios_boot partition '${target_dev}'\n";
- }
-
- &$udevadm_trigger_block();
-
- foreach my $part ($efibootdev, $osdev) {
- syscmd("dd if=/dev/zero of=$part bs=1M count=256") if -b $part;
- }
-
- return ($os_size, $osdev, $efibootdev);
-}
-
-sub get_pv_list_from_vgname {
- my ($vgname) = @_;
-
- my $res;
-
- my $parser = sub {
- my $line = shift;
- $line =~ s/^\s+//;
- $line =~ s/\s+$//;
- return if !$line;
- my ($pv, $vg_uuid) = split(/\s+/, $line);
-
- if (!defined($res->{$vg_uuid}->{pvs})) {
- $res->{$vg_uuid}->{pvs} = "$pv";
- } else {
- $res->{$vg_uuid}->{pvs} .= ", $pv";
- }
- };
- run_command("pvs --noheadings -o pv_name,vg_uuid -S vg_name='$vgname'", $parser, undef, 1);
-
- return $res;
-}
-
-sub ask_existing_vg_rename_or_abort {
- my ($vgname) = @_;
-
- # this normally only happens if one put a disk with a PVE installation in
- # this server and that disk is not the installation target.
- my $duplicate_vgs = get_pv_list_from_vgname($vgname);
- return if !$duplicate_vgs;
-
- my $message = "Detected existing '$vgname' Volume Group(s)! Do you want to:\n";
-
- for my $vg_uuid (keys %$duplicate_vgs) {
- my $vg = $duplicate_vgs->{$vg_uuid};
-
- # no high randomnes properties, but this is only for the cases where
- # we either have multiple "$vgname" vgs from multiple old PVE disks, or
- # we have a disk with both a "$vgname" and "$vgname-old"...
- my $short_uid = sprintf "%08X", rand(0xffffffff);
- $vg->{new_vgname} = "$vgname-OLD-$short_uid";
-
- $message .= "rename VG backed by PV '$vg->{pvs}' to '$vg->{new_vgname}'\n";
- }
- $message .= "or cancel the installation?";
-
- my $response = display_prompt($message);
-
- if ($response eq 'ok') {
- for my $vg_uuid (keys %$duplicate_vgs) {
- my $vg = $duplicate_vgs->{$vg_uuid};
- my $new_vgname = $vg->{new_vgname};
-
- syscmd("vgrename $vg_uuid $new_vgname") == 0 ||
- die "could not rename VG from '$vg->{pvs}' ($vg_uuid) to '$new_vgname'!\n";
- }
- } else {
- set_next("_Reboot", sub { exit (0); } );
- display_html("fail.htm");
- die "Cancled installation by user, due to already existing volume group '$vgname'\n";
- }
-}
-
-sub create_lvm_volumes {
- my ($lvmdev, $os_size, $swap_size) = @_;
-
- my $vgname = $setup->{product};
-
- ask_existing_vg_rename_or_abort($vgname);
-
- my $rootdev = "/dev/$vgname/root";
- my $datadev = "/dev/$vgname/data";
- my $swapfile;
-
- # we use --metadatasize 250k, which results in "pe_start = 512"
- # so pe_start is aligned on a 128k boundary (advantage for SSDs)
- syscmd("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
- die "unable to initialize physical volume $lvmdev\n";
- syscmd("/sbin/vgcreate $vgname $lvmdev") == 0 ||
- die "unable to create volume group '$vgname'\n";
-
- my $hdgb = int($os_size / (1024 * 1024));
-
- # always leave some space at the end to avoid roudning issues with LVM's physical extent (PE)
- # size of 4 MB.
- my $space = $hdgb <= 32 ? 4 * 1024 : (($hdgb > 128 ? 16 : $hdgb / 8) * 1024 * 1024);
-
- my $rootsize;
- my $datasize = 0;
-
- if ($setup->{product} eq 'pve') {
-
- my $maxroot_mb;
- if ($config_options->{maxroot}) {
- $maxroot_mb = $config_options->{maxroot} * 1024;
- } else {
- $maxroot_mb = 96 * 1024;
- }
-
- my $rest = $os_size - $swap_size;
- my $rest_mb = int($rest / 1024);
-
- my $rootsize_mb;
- if ($rest_mb < 12 * 1024) {
- # no point in wasting space, try to get us actually installed and align down to 4 MB
- $rootsize_mb = ($rest_mb - 0.1) & ~3;
- } elsif ($rest_mb < 48 * 1024) {
- my $masked = int($rest_mb / 2) & ~3; # align down to 4 MB
- $rootsize_mb = $masked;
- } else {
- $rootsize_mb = $rest_mb / 4 + 12 * 1024;
- }
-
- $rootsize_mb = $maxroot_mb if $rootsize_mb > $maxroot_mb;
- $rootsize = int($rootsize_mb * 1024);
-
- $rest -= $rootsize; # in KB
-
- my $minfree = $space;
- if (defined(my $cfg_minfree = $config_options->{minfree})) {
- $minfree = $cfg_minfree * 1024 * 1024 >= $rest ? $space : $cfg_minfree * 1024 * 1024;
- }
-
- $rest = int($rest - $minfree) & ~0xFFF; # align down to 4 MB boundaries
-
- if (defined(my $maxvz = $config_options->{maxvz})) {
- $rest = $maxvz * 1024 * 1024 <= $rest ? $maxvz * 1024 * 1024 : $rest;
- }
-
- $datasize = $rest;
-
- } else {
- my $minfree = defined($config_options->{minfree}) ? $config_options->{minfree}*1024*1024 : $space;
- $rootsize = int($os_size - $minfree - $swap_size); # in KB
- $rootsize &= ~0xFFF; # align down to 4 MB boundaries
- }
-
- if ($swap_size) {
- syscmd("/sbin/lvcreate -Wy --yes -L${swap_size}K -nswap $vgname") == 0 ||
- die "unable to create swap volume\n";
-
- $swapfile = "/dev/$vgname/swap";
- }
-
- syscmd("/sbin/lvcreate -Wy --yes -L${rootsize}K -nroot $vgname") == 0 ||
- die "unable to create root volume\n";
-
- if ($datasize > 4 * 1024 * 1024) {
- my $metadatasize = $datasize/100; # default 1% of data
- $metadatasize = 1024*1024 if $metadatasize < 1024*1024; # but at least 1G
- $metadatasize = 16*1024*1024 if $metadatasize > 16*1024*1024; # but at most 16G
-
- # otherwise the metadata is taken out of $minfree
- $datasize -= 2 * $metadatasize;
-
- # 1 4MB PE to allow for rounding
- $datasize -= 4 * 1024;
-
- syscmd("/sbin/lvcreate -Wy --yes -L${datasize}K -ndata $vgname") == 0 ||
- die "unable to create data volume\n";
-
- syscmd("/sbin/lvconvert --yes --type thin-pool --poolmetadatasize ${metadatasize}K $vgname/data") == 0 ||
- die "unable to create data thin-pool\n";
- } else {
- if ($setup->{product} eq 'pve' && !defined($config_options->{maxvz})) {
- display_message("Skipping auto-creation of LVM thinpool for guest data due to low space.");
- }
- $datadev = undef;
- }
-
- syscmd("/sbin/vgchange -a y $vgname") == 0 ||
- die "unable to activate volume group\n";
-
- return ($rootdev, $swapfile, $datadev);
-}
-
-sub compute_swapsize {
- my ($hdsize) = @_;
-
- my $hdgb = int($hdsize/(1024*1024));
-
- my $swapsize_kb;
- if (defined($config_options->{swapsize})) {
- $swapsize_kb = $config_options->{swapsize} * 1024 * 1024;
- } else {
- my $ss = int($total_memory);
- $ss = 4096 if $ss < 4096 && $hdgb >= 64;
- $ss = 2048 if $ss < 2048 && $hdgb >= 32;
- $ss = 1024 if $ss >= 2048 && $hdgb <= 16;
- $ss = 512 if $ss < 512;
- $ss = int($hdgb * 128) if $ss > $hdgb * 128;
- $ss = 8192 if $ss > 8192;
- $swapsize_kb = int($ss * 1024) & ~0xFFF; # align to 4 MB to avoid all to odd SWAP size
- }
-
- return $swapsize_kb;
-}
-
-my sub chroot_chown {
- my ($root, $path, %param) = @_;
-
- my $recursive = $param{recursive} ? ' -R' : '';
- my $user = $param{user};
- die "can not chown without user parameter\n" if !defined($user);
- my $group = $param{group} // $user;
-
- syscmd("chroot $root /bin/chown $user:$group $recursive $path") == 0 ||
- die "chroot: unable to change owner for '$path'\n";
-}
-
-my sub chroot_chmod {
- my ($root, $path, %param) = @_;
-
- my $recursive = $param{recursive} ? ' -R' : '';
- my $mode = $param{mode};
- die "can not chmod without mode parameter\n" if !defined($mode);
-
- syscmd("chroot $root /bin/chmod $mode $recursive $path") == 0 ||
- die "chroot: unable to change permission mode for '$path'\n";
-}
-
-sub prepare_proxmox_boot_esp {
- my ($espdev, $targetdir) = @_;
-
- syscmd("chroot $targetdir proxmox-boot-tool init $espdev") == 0 ||
- die "unable to init ESP and install proxmox-boot loader on '$espdev'\n";
-}
-
-sub prepare_grub_efi_boot_esp {
- my ($dev, $espdev, $targetdir) = @_;
-
- syscmd("mount -n $espdev -t vfat $targetdir/boot/efi") == 0 ||
- die "unable to mount $espdev\n";
-
- eval {
- my $rc = syscmd("chroot $targetdir /usr/sbin/grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' $dev");
- if ($rc != 0) {
- if ($boot_type eq 'efi') {
- die "unable to install the EFI boot loader on '$dev'\n";
- } else {
- warn "unable to install the EFI boot loader on '$dev', ignoring (not booted using UEFI)\n";
- }
- }
- # also install fallback boot file (OVMF does not boot without)
- mkdir("$targetdir/boot/efi/EFI/BOOT");
- syscmd("cp $targetdir/boot/efi/EFI/proxmox/grubx64.efi $targetdir/boot/efi/EFI/BOOT/BOOTx64.EFI") == 0 ||
- die "unable to copy efi boot loader\n";
- };
- my $err = $@;
-
- eval {
- syscmd("umount $targetdir/boot/efi") == 0 ||
- die "unable to umount $targetdir/boot/efi\n";
- };
- warn $@ if $@;
-
- die "failed to prepare EFI boot using Grub on '$espdev': $err" if $err;
-}
-
-sub extract_data {
- my ($basefile, $targetdir) = @_;
-
- die "target '$targetdir' does not exist\n" if ! -d $targetdir;
-
- my $starttime = [Time::HiRes::gettimeofday];
-
- my $bootdevinfo = [];
-
- my $swapfile;
- my $rootdev;
- my $datadev;
-
- my $use_zfs = 0;
- my $use_btrfs = 0;
-
- my $filesys = $config_options->{filesys};
-
- if ($filesys =~ m/zfs/) {
- $target_hd = undef; # do not use this config
- $use_zfs = 1;
- $targetdir = "/$zfspoolname/ROOT/$zfsrootvolname";
- } elsif ($filesys =~ m/btrfs/) {
- $target_hd = undef; # do not use this config
- $use_btrfs = 1;
- }
-
- if ($use_zfs) {
- my $i;
- for ($i = 5; $i > 0; $i--) {
- syscmd("modprobe zfs");
- last if -c "/dev/zfs";
- sleep(1);
- }
-
- die "unable to load zfs kernel module\n" if !$i;
- }
-
- my $bootloader_err;
-
- eval {
- my $maxper = 0.25;
-
- update_progress(0, 0, $maxper, "cleanup root-disks");
-
- syscmd("vgchange -an") if !is_test_mode(); # deactivate all detected VGs
-
- if (is_test_mode()) {
-
- $rootdev = abs_path($test_image);
- syscmd("umount $rootdev");
-
- if ($use_btrfs) {
-
- die "unsupported btrfs mode (for testing environment)\n"
- if $filesys ne 'btrfs (RAID0)';
-
- btrfs_create([$rootdev], 'single');
-
- } elsif ($use_zfs) {
-
- die "unsupported zfs mode (for testing environment)\n"
- if $filesys ne 'zfs (RAID0)';
-
- syscmd("zpool destroy $zfstestpool");
-
- zfs_create_rpool($rootdev);
-
- } else {
-
- # nothing to do
- }
-
- } elsif ($use_btrfs) {
-
- my ($devlist, $btrfs_mode) = get_btrfs_raid_setup();
-
- foreach my $hd (@$devlist) {
- $clean_disk->(@$hd[1]);
- }
-
- update_progress(0, 0.02, $maxper, "create partitions");
-
- my $btrfs_partitions = [];
- foreach my $hd (@$devlist) {
- my $devname = @$hd[1];
- my $logical_bsize = @$hd[4];
-
- my ($size, $osdev, $efidev) =
- partition_bootable_disk($devname, $config_options->{hdsize}, '8300');
- $rootdev = $osdev if !defined($rootdev); # simply point to first disk
- my $by_id = find_stable_path("/dev/disk/by-id", $devname);
- push @$bootdevinfo, {
- esp => $efidev,
- devname => $devname,
- osdev => $osdev,
- by_id => $by_id,
- logical_bsize => $logical_bsize,
- };
- push @$btrfs_partitions, $osdev;
- }
-
- $udevadm_trigger_block->();
-
- update_progress(0, 0.03, $maxper, "create btrfs");
-
- btrfs_create($btrfs_partitions, $btrfs_mode);
-
- } elsif ($use_zfs) {
-
- my ($devlist, $vdev) = get_zfs_raid_setup();
-
- foreach my $hd (@$devlist) {
- $clean_disk->(@$hd[1]);
- }
-
- update_progress(0, 0.02, $maxper, "create partitions");
-
- # install esp/boot part on all, we can only win!
- for my $hd (@$devlist) {
- my $devname = @$hd[1];
- my $logical_bsize = @$hd[4];
-
- my ($size, $osdev, $efidev) =
- partition_bootable_disk($devname, $config_options->{hdsize}, 'BF01');
-
- push @$bootdevinfo, {
- esp => $efidev,
- devname => $devname,
- osdev => $osdev,
- logical_bsize => $logical_bsize,
- };
- }
-
- $udevadm_trigger_block->();
-
- foreach my $di (@$bootdevinfo) {
- my $devname = $di->{devname};
- $di->{by_id} = find_stable_path ("/dev/disk/by-id", $devname);
-
- my $osdev = find_stable_path ("/dev/disk/by-id", $di->{osdev}) || $di->{osdev};
-
- $vdev =~ s/ $devname/ $osdev/;
- }
-
- foreach my $hd (@$devlist) {
- my $devname = @$hd[1];
- my $by_id = find_stable_path ("/dev/disk/by-id", $devname);
-
- $vdev =~ s/ $devname/ $by_id/ if $by_id;
- }
-
- update_progress(0, 0.03, $maxper, "create rpool");
-
- zfs_create_rpool($vdev);
-
- } else {
-
- die "target '$target_hd' is not a valid block device\n" if ! -b $target_hd;
-
- $clean_disk->($target_hd);
-
- update_progress(0, 0.02, $maxper, "create partitions");
-
- my $logical_bsize = logical_blocksize($target_hd);
-
- my ($os_size, $osdev, $efidev) =
- partition_bootable_disk($target_hd, $config_options->{hdsize}, '8E00');
-
- &$udevadm_trigger_block();
-
- my $by_id = find_stable_path ("/dev/disk/by-id", $target_hd);
- push @$bootdevinfo, {
- esp => $efidev,
- devname => $target_hd,
- osdev => $osdev,
- by_id => $by_id,
- logical_bsize => $logical_bsize,
- };
-
- update_progress(0, 0.03, $maxper, "create LVs");
-
- my $swap_size = compute_swapsize($os_size);
- ($rootdev, $swapfile, $datadev) =
- create_lvm_volumes($osdev, $os_size, $swap_size);
-
- # trigger udev to create /dev/disk/by-uuid
- &$udevadm_trigger_block(1);
- }
-
- if ($use_zfs) {
- # to be fast during installation
- syscmd("zfs set sync=disabled $zfspoolname") == 0 ||
- die "unable to set zfs properties\n";
- }
-
- update_progress(0.04, 0, $maxper, "create swap space");
- if ($swapfile) {
- syscmd("mkswap -f $swapfile") == 0 ||
- die "unable to create swap space\n";
- }
-
- update_progress(0.045, 0, $maxper, "creating root filesystems");
-
- foreach my $di (@$bootdevinfo) {
- next if !$di->{esp};
- # FIXME remove '-s1' once https://github.com/dosfstools/dosfstools/issues/111 is fixed
- my $vfat_extra_opts = ($di->{logical_bsize} == 4096) ? '-s1' : '';
- syscmd("mkfs.vfat $vfat_extra_opts -F32 $di->{esp}") == 0 ||
- die "unable to initialize EFI ESP on device $di->{esp}\n";
- }
-
- if ($use_zfs) {
- # do nothing
- } elsif ($use_btrfs) {
- # do nothing
- } else {
- create_filesystem($rootdev, 'root', $filesys, 0.05, $maxper, 0, 1);
- }
-
- update_progress(1, 0.05, $maxper, "mounting target $rootdev");
-
- if ($use_zfs) {
- # do nothing
- } else {
- my $mount_opts = 'noatime';
- $mount_opts .= ',nobarrier'
- if $use_btrfs || $filesys =~ /^ext\d$/;
-
- syscmd("mount -n $rootdev -o $mount_opts $targetdir") == 0 ||
- die "unable to mount $rootdev\n";
- }
-
- mkdir "$targetdir/boot";
- mkdir "$targetdir/boot/efi";
-
- mkdir "$targetdir/var";
- mkdir "$targetdir/var/lib";
-
- if ($setup->{product} eq 'pve') {
- mkdir "$targetdir/var/lib/vz";
- mkdir "$targetdir/var/lib/pve";
-
- if ($use_btrfs) {
- syscmd("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
- die "unable to create btrfs subvolume\n";
- }
- }
-
- mkdir "$targetdir/mnt";
- mkdir "$targetdir/mnt/hostrun";
- syscmd("mount --bind /run $targetdir/mnt/hostrun") == 0 ||
- die "unable to bindmount run on $targetdir/mnt/hostrun\n";
-
- update_progress(1, 0.05, $maxper, "extracting base system");
-
- my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($basefile);
- $ino || die "unable to open file '$basefile' - $!\n";
-
- my $files = file_read_firstline("${proxmox_cddir}/proxmox/$setup->{product}-base.cnt") ||
- die "unable to read base file count\n";
-
- my $per = 0;
- my $count = 0;
-
- run_command("unsquashfs -f -dest $targetdir -i $basefile", sub {
- my $line = shift;
- return if $line !~ m/^$targetdir/;
- $count++;
- my $nper = int (($count *100)/$files);
- if ($nper != $per) {
- $per = $nper;
- my $frac = $per > 100 ? 1 : $per/100;
- update_progress($frac, $maxper, 0.5);
- }
- });
-
- syscmd("mount -n -t tmpfs tmpfs $targetdir/tmp") == 0 || die "unable to mount tmpfs on $targetdir/tmp\n";
-
- mkdir "$targetdir/tmp/pkg";
- syscmd("mount -n --bind '$proxmox_pkgdir' '$targetdir/tmp/pkg'") == 0
- || die "unable to bind-mount packages on $targetdir/tmp/pkg\n";
- syscmd("mount -n -t proc proc $targetdir/proc") == 0 || die "unable to mount proc on $targetdir/proc\n";
- syscmd("mount -n -t sysfs sysfs $targetdir/sys") == 0 || die "unable to mount sysfs on $targetdir/sys\n";
- if ($boot_type eq 'efi') {
- syscmd("mount -n -t efivarfs efivarfs $targetdir/sys/firmware/efi/efivars") == 0 ||
- die "unable to mount efivarfs on $targetdir/sys/firmware/efi/efivars: $!\n";
- }
- syscmd("chroot $targetdir mount --bind /mnt/hostrun /run") == 0 ||
- die "unable to re-bindmount hostrun on /run in chroot\n";
-
- update_progress(1, $maxper, 0.5, "configuring base system");
-
- # configure hosts
-
- my $hosts =
- "127.0.0.1 localhost.localdomain localhost\n" .
- "$ipaddress $hostname.$domain $hostname\n\n" .
- "# The following lines are desirable for IPv6 capable hosts\n\n" .
- "::1 ip6-localhost ip6-loopback\n" .
- "fe00::0 ip6-localnet\n" .
- "ff00::0 ip6-mcastprefix\n" .
- "ff02::1 ip6-allnodes\n" .
- "ff02::2 ip6-allrouters\n" .
- "ff02::3 ip6-allhosts\n";
-
- file_write_all("$targetdir/etc/hosts", $hosts);
-
- file_write_all("$targetdir/etc/hostname", "$hostname\n");
-
- syscmd("/bin/hostname $hostname") if !is_test_mode();
-
- # configure interfaces
-
- my $ifaces = "auto lo\niface lo inet loopback\n\n";
-
- my $ntype = $ipversion == 4 ? 'inet' : 'inet6';
-
- my $ethdev = $ipconf->{ifaces}->{$ipconf->{selected}}->{name};
-
- if ($setup->{bridged_network}) {
- $ifaces .= "iface $ethdev $ntype manual\n";
-
- $ifaces .=
- "\nauto vmbr0\niface vmbr0 $ntype static\n" .
- "\taddress $cidr\n" .
- "\tgateway $gateway\n" .
- "\tbridge-ports $ethdev\n" .
- "\tbridge-stp off\n" .
- "\tbridge-fd 0\n";
- } else {
- $ifaces .= "auto $ethdev\n" .
- "iface $ethdev $ntype static\n" .
- "\taddress $cidr\n" .
- "\tgateway $gateway\n";
- }
-
- foreach my $iface (sort keys %{$ipconf->{ifaces}}) {
- my $name = $ipconf->{ifaces}->{$iface}->{name};
- next if $name eq $ethdev;
-
- $ifaces .= "\niface $name $ntype manual\n";
- }
-
- file_write_all("$targetdir/etc/network/interfaces", $ifaces);
-
- # configure dns
-
- my $resolvconf = "search $domain\nnameserver $dnsserver\n";
- file_write_all("$targetdir/etc/resolv.conf", $resolvconf);
-
- # configure fstab
-
- my $fstab = "# <file system> <mount point> <type> <options> <dump> <pass>\n";
-
- if ($use_zfs) {
- # do nothing
- } elsif ($use_btrfs) {
- my $fsuuid;
- my $cmd = "blkid -u filesystem -t TYPE=btrfs -o export $rootdev";
- run_command($cmd, sub {
- my $line = shift;
-
- if ($line =~ m/^UUID=([A-Fa-f0-9\-]+)$/) {
- $fsuuid = $1;
- }
- });
-
- die "unable to detect FS UUID" if !defined($fsuuid);
-
- $fstab .= "UUID=$fsuuid / btrfs defaults 0 1\n";
- } else {
- my $root_mountopt = $fssetup->{$filesys}->{root_mountopt} || 'defaults';
- $fstab .= "$rootdev / $filesys ${root_mountopt} 0 1\n";
- }
-
- # mount /boot/efi
- # Note: this is required by current grub, but really dangerous, because
- # vfat does not have journaling, so it triggers manual fsck after each crash
- # so we only mount /boot/efi if really required (efi systems).
- if ($boot_type eq 'efi' && !$use_zfs) {
- if (scalar(@$bootdevinfo)) {
- my $di = @$bootdevinfo[0]; # simply use first disk
-
- if ($di->{esp}) {
- my $efi_boot_uuid = $di->{esp};
- if (my $uuid = find_dev_by_uuid ($di->{esp})) {
- $efi_boot_uuid = "UUID=$uuid";
- }
-
- $fstab .= "${efi_boot_uuid} /boot/efi vfat defaults 0 1\n";
- }
- }
- }
-
-
- $fstab .= "$swapfile none swap sw 0 0\n" if $swapfile;
-
- $fstab .= "proc /proc proc defaults 0 0\n";
-
- file_write_all("$targetdir/etc/fstab", $fstab);
- file_write_all("$targetdir/etc/mtab", "");
-
- syscmd("cp ${proxmox_libdir}/policy-disable-rc.d " .
- "$targetdir/usr/sbin/policy-rc.d") == 0 ||
- die "unable to copy policy-rc.d\n";
- syscmd("cp ${proxmox_libdir}/fake-start-stop-daemon " .
- "$targetdir/sbin/") == 0 ||
- die "unable to copy start-stop-daemon\n";
-
- diversion_add($targetdir, "/sbin/start-stop-daemon", "/sbin/fake-start-stop-daemon");
- diversion_add($targetdir, "/usr/sbin/update-grub", "/bin/true");
- diversion_add($targetdir, "/usr/sbin/update-initramfs", "/bin/true");
-
- my $machine_id = run_command("systemd-id128 new");
- die "unable to create a new machine-id\n" if ! $machine_id;
- file_write_all("$targetdir/etc/machine-id", $machine_id);
-
- syscmd("cp /etc/hostid $targetdir/etc/") == 0 ||
- die "unable to copy hostid\n";
-
- syscmd("touch $targetdir/proxmox_install_mode");
-
- my $grub_install_devices_txt = '';
- foreach my $di (@$bootdevinfo) {
- $grub_install_devices_txt .= ', ' if $grub_install_devices_txt;
- $grub_install_devices_txt .= $di->{by_id} || $di->{devname};
- }
-
- # Note: keyboard-configuration/xbkb-keymap is used by console-setup
- my $xkmap = $cmap->{kmap}->{$keymap}->{x11} // 'us';
-
- debconfig_set ($targetdir, <<_EOD);
-locales locales/default_environment_locale select en_US.UTF-8
-locales locales/locales_to_be_generated select en_US.UTF-8 UTF-8
-samba-common samba-common/dhcp boolean false
-samba-common samba-common/workgroup string WORKGROUP
-postfix postfix/main_mailer_type select No configuration
-keyboard-configuration keyboard-configuration/xkb-keymap select $xkmap
-d-i debian-installer/locale select en_US.UTF-8
-grub-pc grub-pc/install_devices select $grub_install_devices_txt
-_EOD
-
- my $pkg_count = 0;
- while (<${proxmox_pkgdir}/*.deb>) { $pkg_count++ };
-
- # btrfs/dpkg is extremely slow without --force-unsafe-io
- my $dpkg_opts = $use_btrfs ? "--force-unsafe-io" : "";
-
- $count = 0;
- while (<${proxmox_pkgdir}/*.deb>) {
- chomp;
- my $path = $_;
- my ($deb) = $path =~ m/${proxmox_pkgdir}\/(.*\.deb)/;
- update_progress($count/$pkg_count, 0.5, 0.75, "extracting $deb");
- print "extracting: $deb\n";
- syscmd("chroot $targetdir dpkg $dpkg_opts --force-depends --no-triggers --unpack /tmp/pkg/$deb") == 0
- || die "installation of package $deb failed\n";
- update_progress((++$count)/$pkg_count, 0.5, 0.75);
- }
-
- # needed for postfix postinst in case no other NIC is active
- syscmd("chroot $targetdir ifup lo");
-
- my $cmd = "chroot $targetdir dpkg $dpkg_opts --force-confold --configure -a";
- $count = 0;
- run_command($cmd, sub {
- my $line = shift;
- if ($line =~ m/Setting up\s+(\S+)/) {
- update_progress((++$count)/$pkg_count, 0.75, 0.95, "configuring $1");
- }
- });
-
- unlink "$targetdir/etc/mailname";
- $postfix_main_cf =~ s/__FQDN__/${hostname}.${domain}/;
- file_write_all("$targetdir/etc/postfix/main.cf", $postfix_main_cf);
-
- # make sure we have all postfix directories
- syscmd("chroot $targetdir /usr/sbin/postfix check");
- # cleanup mail queue
- syscmd("chroot $targetdir /usr/sbin/postsuper -d ALL");
- # create /etc/aliases.db (/etc/aliases is shipped in the base squashfs)
- syscmd("chroot $targetdir /usr/bin/newaliases");
-
- unlink "$targetdir/proxmox_install_mode";
-
- # set timezone
- unlink ("$targetdir/etc/localtime");
- symlink ("/usr/share/zoneinfo/$timezone", "$targetdir/etc/localtime");
- file_write_all("$targetdir/etc/timezone", "$timezone\n");
-
- # set apt mirror
- if (my $mirror = $cmap->{country}->{$country}->{mirror}) {
- my $fn = "$targetdir/etc/apt/sources.list";
- syscmd("sed -i 's/ftp\\.debian\\.org/$mirror/' '$fn'");
- }
-
- # create extended_states for apt (avoid cron job warning if that
- # file does not exist)
- file_write_all("$targetdir/var/lib/apt/extended_states", '');
-
- # allow ssh root login
- syscmd(['sed', '-i', 's/^#\?PermitRootLogin.*/PermitRootLogin yes/', "$targetdir/etc/ssh/sshd_config"]);
-
- if ($setup->{product} eq 'pmg') {
- # install initial clamav DB
- my $srcdir = "${proxmox_cddir}/proxmox/clamav";
- foreach my $fn ("main.cvd", "bytecode.cvd", "daily.cvd", "safebrowsing.cvd") {
- syscmd("cp \"$srcdir/$fn\" \"$targetdir/var/lib/clamav\"") == 0 ||
- die "installation of clamav db file '$fn' failed\n";
- }
- syscmd("chroot $targetdir /bin/chown clamav:clamav -R /var/lib/clamav") == 0 ||
- die "unable to set owner for clamav database files\n";
- }
-
- if ($setup->{product} eq 'pve') {
- # save installer settings
- my $ucc = uc ($country);
- debconfig_set($targetdir, "pve-manager pve-manager/country string $ucc\n");
- }
-
- update_progress(0.8, 0.95, 1, "make system bootable");
-
- if ($use_zfs) {
- # add ZFS options while preserving existing kernel cmdline
- my $zfs_snippet = "GRUB_CMDLINE_LINUX=\"\$GRUB_CMDLINE_LINUX root=ZFS=$zfspoolname/ROOT/$zfsrootvolname boot=zfs\"";
- file_write_all("$targetdir/etc/default/grub.d/zfs.cfg", $zfs_snippet);
-
- file_write_all("$targetdir/etc/kernel/cmdline", "root=ZFS=$zfspoolname/ROOT/$zfsrootvolname boot=zfs\n");
-
- }
-
- diversion_remove($targetdir, "/usr/sbin/update-grub");
- diversion_remove($targetdir, "/usr/sbin/update-initramfs");
-
- my $kapi;
- foreach my $fn (<$targetdir/lib/modules/*>) {
- if ($fn =~ m!/(\d+\.\d+\.\d+-\d+-pve)$!) {
- die "found multiple kernels\n" if defined($kapi);
- $kapi = $1;
- }
- }
- die "unable to detect kernel version\n" if !defined($kapi);
-
- if (!is_test_mode()) {
-
- unlink ("$targetdir/etc/mtab");
- symlink ("/proc/mounts", "$targetdir/etc/mtab");
- syscmd("mount -n --bind /dev $targetdir/dev");
-
- my $bootloader_err_list = [];
- eval {
- syscmd("chroot $targetdir /usr/sbin/update-initramfs -c -k $kapi") == 0 ||
- die "unable to install initramfs\n";
-
- my $native_4k_disk_bootable = 0;
- foreach my $di (@$bootdevinfo) {
- $native_4k_disk_bootable |= ($di->{logical_bsize} == 4096);
- }
-
- foreach my $di (@$bootdevinfo) {
- my $dev = $di->{devname};
- if ($use_zfs) {
- prepare_proxmox_boot_esp($di->{esp}, $targetdir);
- } else {
- if (!$native_4k_disk_bootable) {
- eval {
- syscmd("chroot $targetdir /usr/sbin/grub-install --target i386-pc --no-floppy --bootloader-id='proxmox' $dev") == 0 ||
- die "unable to install the i386-pc boot loader on '$dev'\n";
- };
- push @$bootloader_err_list, $@ if $@;
- }
-
- eval {
- if (my $esp = $di->{esp}) {
- prepare_grub_efi_boot_esp($dev, $esp, $targetdir);
- }
- }
- };
- push @$bootloader_err_list, $@ if $@;
- }
-
- syscmd("chroot $targetdir /usr/sbin/update-grub") == 0 ||
- die "unable to update boot loader config\n";
- };
- push @$bootloader_err_list, $@ if $@;
-
- if (scalar(@$bootloader_err_list) > 0) {
- $bootloader_err = "bootloader setup errors:\n";
- map { $bootloader_err .= "- $_" } @$bootloader_err_list;
- warn $bootloader_err;
- }
-
- syscmd("umount $targetdir/dev");
- }
-
- # cleanup
-
- unlink "$targetdir/usr/sbin/policy-rc.d";
-
- diversion_remove($targetdir, "/sbin/start-stop-daemon");
-
- # set root password
- my $octets = encode("utf-8", $password);
- run_command("chroot $targetdir /usr/sbin/chpasswd", undef,
- "root:$octets\n");
-
- if ($setup->{product} eq 'pmg') {
- # save admin email
- file_write_all("$targetdir/etc/pmg/pmg.conf", "section: admin\n\temail ${mailto}\n");
-
- } elsif ($setup->{product} eq 'pve') {
-
- # create pmxcfs DB
-
- my $tmpdir = "$targetdir/tmp/pve";
- mkdir $tmpdir;
-
- # write vnc keymap to datacenter.cfg
- my $vnckmap = $cmap->{kmap}->{$keymap}->{kvm} || 'en-us';
- file_write_all("$tmpdir/datacenter.cfg", "keyboard: $vnckmap\n");
-
- # save admin email
- file_write_all("$tmpdir/user.cfg", "user:root\@pam:1:0:::${mailto}::\n");
-
- # write storage.cfg
- my $storage_cfg;
- if ($use_zfs) {
- $storage_cfg = $storage_cfg_zfs;
- } elsif ($use_btrfs) {
- $storage_cfg = $storage_cfg_btrfs;
- } elsif ($datadev) {
- $storage_cfg = $storage_cfg_lvmthin;
- } else {
- $storage_cfg = $storage_cfg_local;
- }
- file_write_all("$tmpdir/storage.cfg", $storage_cfg);
-
- run_command("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
-
- syscmd("rm -rf $tmpdir");
- } elsif ($setup->{product} eq 'pbs') {
- my $base_cfg_path = "/etc/proxmox-backup";
- mkdir "$targetdir/$base_cfg_path";
-
- chroot_chown($targetdir, $base_cfg_path, user => 'backup', recursive => 1);
- chroot_chmod($targetdir, $base_cfg_path, mode => '0700');
-
- my $user_cfg_fn = "$base_cfg_path/user.cfg";
- file_write_all("$targetdir/$user_cfg_fn", "user: root\@pam\n\temail ${mailto}\n");
- chroot_chown($targetdir, $user_cfg_fn, user => 'root', group => 'backup');
- chroot_chmod($targetdir, $user_cfg_fn, mode => '0640');
- }
- };
-
- my $err = $@;
-
- update_progress(1, 0, 1, "");
-
- print $err if $err;
-
- if (is_test_mode()) {
- my $elapsed = Time::HiRes::tv_interval($starttime);
- print "Elapsed extract time: $elapsed\n";
-
- syscmd("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> final.pkglist");
- }
-
- syscmd("umount $targetdir/run");
- syscmd("umount $targetdir/mnt/hostrun");
- syscmd("umount $targetdir/tmp/pkg");
- syscmd("umount $targetdir/tmp");
- syscmd("umount $targetdir/proc");
- syscmd("umount $targetdir/sys/firmware/efi/efivars");
- syscmd("umount $targetdir/sys");
- rmdir("$targetdir/mnt/hostrun");
-
- if ($use_zfs) {
- syscmd("zfs umount -a") == 0 ||
- die "unable to unmount zfs\n";
- } else {
- syscmd("umount -d $targetdir");
- }
-
- if (!$err && $use_zfs) {
- syscmd("zfs set sync=standard $zfspoolname") == 0 ||
- die "unable to set zfs properties\n";
-
- syscmd("zfs set mountpoint=/ $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
- die "zfs set mountpoint failed\n";
+use Encode;
+use Getopt::Long;
+use IO::File;
+use Glib;
+use Gtk3;
+use Gtk3::WebKit2;
+use POSIX ":sys_wait_h";
+use JSON;
- syscmd("zpool set bootfs=$zfspoolname/ROOT/$zfsrootvolname $zfspoolname") == 0 ||
- die "zpool set bootfs failed\n";
- syscmd("zpool export $zfspoolname");
- }
+use Proxmox::Log;
+Proxmox::Log::init("/tmp/install.log");
- if ($bootloader_err) {
- $err = $err ? "$err\n$bootloader_err" : $bootloader_err;
- }
+{ # NOTE: order is important here
+ my $test_image;
+ GetOptions(
+ 'test-image|t=s' => \$test_image
+ ) or die "usage error\n";
- die $err if $err;
+ Proxmox::Install::ISOEnv::set_test_image($test_image) if $test_image;
}
-my $last_display_change = 0;
-
-my $display_info_counter = 0;
-
-my $display_info_items = [
- "extract1-license.htm",
- "extract2-rulesystem.htm",
- "extract3-spam.htm",
- "extract4-virus.htm",
- ];
-
-sub display_info {
+use Proxmox::Install::ISOEnv;
+use Proxmox::Install::RunEnv;
- my $min_display_time = 15;
+# init singletons TODO: avoid all global initialization, use single "main" method
+my $iso_env = Proxmox::Install::ISOEnv::get();
- my $ctime = time();
+use Proxmox::Install;
+use Proxmox::Install::Config;
- return if ($ctime - $last_display_change) < $min_display_time;
-
- my $page = $display_info_items->[$display_info_counter % scalar(@$display_info_items)];
-
- $display_info_counter++;
+use Proxmox::Sys::Block qw(get_cached_disks);
+use Proxmox::Sys::Command qw(syscmd);
+use Proxmox::Sys::File qw(file_read_all file_write_all);
+use Proxmox::Sys::Net qw(parse_ip_address parse_ip_mask);
+use Proxmox::UI;
- display_html($page);
+if (!$ENV{G_SLICE} || $ENV{G_SLICE} ne "always-malloc") {
+ die "do not use slice allocator (run with 'G_SLICE=always-malloc ./proxinstall ...')\n";
}
-sub display_html {
- my ($filename) = @_;
+my $step_number = 0; # Init number for global function list
- $filename = $steps[$step_number]->{html} if !$filename;
+my @steps = (
+ {
+ step => 'intro',
+ html => 'license.htm',
+ next_button => 'I a_gree',
+ function => \&create_intro_view,
+ },
+ {
+ step => 'intro',
+ html => 'page1.htm',
+ function => \&create_hdsel_view,
+ },
+ {
+ step => 'country',
+ html => 'country.htm',
+ function => \&create_country_view,
+ },
+ {
+ step => 'password',
+ html => 'passwd.htm',
+ function => \&create_password_view,
+ },
+ {
+ step => 'ipconf',
+ html => 'ipconf.htm',
+ function => \&create_ipconf_view,
+ },
+ {
+ step => 'ack',
+ html => 'ack.htm',
+ next_button => '_Install',
+ function => \&create_ack_view,
+ },
+ {
+ step => 'extract',
+ next_button => '_Reboot',
+ function => \&create_extract_view,
+ },
+);
- my $htmldir = "${proxmox_libdir}/html";
- my $path;
- if (-f "$htmldir/$setup->{product}/$filename") {
- $path = "$htmldir/$setup->{product}/$filename";
- } else {
- $path = "$htmldir/$filename";
- }
+# GUI global variables
+my $gtk_state = {};
- my $data = file_read_all($path);
+my $target_hds; # only for the summary view
- if ($filename eq 'license.htm') {
- my $license = eval { decode('utf8', file_read_all("${proxmox_cddir}/EULA")) };
- if (my $err = $@) {
- die $err if !is_test_mode();
- $license = "TESTMODE: Ignore non existent EULA...\n";
- }
- my $title = "END USER LICENSE AGREEMENT (EULA)";
- $data =~ s/__LICENSE__/$license/;
- $data =~ s/__LICENSE_TITLE__/$title/;
- } elsif ($filename eq 'success.htm') {
- my $addr = $ipversion == 6 ? "[${ipaddress}]" : "$ipaddress";
- $data =~ s/__IPADDR__/$addr/g;
- $data =~ s/__PORT__/$setup->{port}/g;
-
- my $autoreboot_msg = $config_options->{autoreboot}
- ? "Automatic reboot scheduled in $autoreboot_seconds seconds."
- : '';
- $data =~ s/__AUTOREBOOT_MSG__/$autoreboot_msg/;
- }
- $data =~ s/__FULL_PRODUCT_NAME__/$setup->{fullname}/g;
+sub app_quit {
+ my ($exit_code) = @_;
- # always set base-path to common path, all resources are accesible from there.
- $htmlview->load_html($data, "file://$htmldir/");
+ Gtk3->main_quit() if Gtk3->main_level() > 0;
- $last_display_change = time();
+ # reap left over zombie processes
+ while ((my $child = waitpid(-1, POSIX::WNOHANG)) > 0) {
+ print STDERR "reaped child $child\n";
+ }
+ exit($exit_code);
}
sub prev_function {
-
my ($text, $fctn) = @_;
$fctn = $step_number if !$fctn;
$text = "_Previous" if !$text;
- $prev_btn->set_label ($text);
+ $gtk_state->{prev_btn}->set_label($text);
$step_number--;
$steps[$step_number]->{function}();
- $prev_btn->grab_focus();
+ $gtk_state->{prev_btn}->grab_focus();
}
sub set_next {
my ($text, $fctn) = @_;
- $next_fctn = $fctn;
+ $gtk_state->{next_btn_callback} = $fctn;
my $step = $steps[$step_number];
$text //= $steps[$step_number]->{next_button} // '_Next';
- $next->set_label($text);
+ $gtk_state->{next_btn}->set_label($text);
- $next->grab_focus();
+ $gtk_state->{next_btn}->grab_focus();
}
sub create_main_window {
- $window = Gtk3::Window->new();
+ my $window = Gtk3::Window->new();
$window->set_default_size(1024, 768);
- $window->set_has_resize_grip(0);
+ $window->signal_connect(map => sub { $window->set_resizable(0); });
$window->fullscreen() if !is_test_mode();
$window->set_decorated(0) if !is_test_mode();
+ $window->signal_connect(destroy => sub { Gtk3->main_quit(); });
- my $vbox = Gtk3::VBox->new(0, 0);
+ my $vbox = Gtk3::Box->new('vertical', 0);
- my $logofn = "$setup->{product}-banner.png";
+ my $logofn = "$iso_env->{product}-banner.png";
+ my $proxmox_libdir = $iso_env->{locations}->{lib};
my $image = Gtk3::Image->new_from_file("${proxmox_libdir}/$logofn");
my $provider = Gtk3::CssProvider->new();
$vbox->pack_start($image, 0, 0, 0);
- my $hbox = Gtk3::HBox->new(0, 0);
+ my $hbox = Gtk3::Box->new('horizontal', 0);
$vbox->pack_start($hbox, 1, 1, 0);
# my $f1 = Gtk3::Frame->new ('test');
# $f1->set_shadow_type ('none');
# $hbox->pack_start ($f1, 1, 1, 0);
- my $sep1 = Gtk3::HSeparator->new();
+ my $sep1 = Gtk3::Separator->new('horizontal');
$vbox->pack_start($sep1, 0, 0, 0);
- $cmdbox = Gtk3::HBox->new();
+ my $cmdbox = Gtk3::Box->new('horizontal', 0);
$vbox->pack_start($cmdbox, 0, 0, 10);
- $next = Gtk3::Button->new('_Next');
- $next->signal_connect(clicked => sub { $last_display_change = 0; &$next_fctn (); });
- $cmdbox->pack_end($next, 0, 0, 10);
-
+ my $next_btn = Gtk3::Button->new('_Next');
+ $next_btn->signal_connect(clicked => sub {
+ Proxmox::Install::reset_last_display_change();
+ $gtk_state->{next_btn_callback}->();
+ });
+ $cmdbox->pack_end($next_btn, 0, 0, 10);
- $prev_btn = Gtk3::Button->new('_Previous');
- $prev_btn->signal_connect(clicked => sub { $last_display_change = 0; &prev_function (); });
+ my $prev_btn = Gtk3::Button->new('_Previous');
+ $prev_btn->signal_connect(clicked => sub {
+ Proxmox::Install::reset_last_display_change();
+ prev_function();
+ });
$cmdbox->pack_end($prev_btn, 0, 0, 10);
my $abort = Gtk3::Button->new('_Abort');
$abort->set_can_focus(0);
$cmdbox->pack_start($abort, 0, 0, 10);
- $abort->signal_connect(clicked => sub { exit (-1); });
+ $abort->signal_connect(clicked => sub {
+ my $msg = 'Abort Installation';
+ my $secondary_text = 'Are you sure you want to abort the installation?';
+ my $dialog = Gtk3::MessageDialog->new($window, 'modal', 'question', 'yes-no', $msg);
+ $dialog->format_secondary_text($secondary_text);
+ $dialog->signal_connect(response => sub {
+ my ($dialog, $response) = @_;
+
+ $dialog->close();
+ app_quit(-1) if $response eq 'yes';
+ });
+ $dialog->present();
+ });
- my $vbox2 = Gtk3::VBox->new(0, 0);
+ my $vbox2 = Gtk3::Box->new('vertical', 0);
$hbox->add($vbox2);
- $htmlview = Gtk3::WebKit2::WebView->new();
+ my $html_view = Gtk3::WebKit2::WebView->new();
+ $html_view->set_hexpand(1);
my $scrolls = Gtk3::ScrolledWindow->new();
- $scrolls->add($htmlview);
+ $scrolls->add($html_view);
- my $hbox2 = Gtk3::HBox->new(0, 0);
+ my $hbox2 = Gtk3::Box->new('horizontal', 0);
$hbox2->pack_start($scrolls, 1, 1, 0);
$vbox2->pack_start($hbox2, 1, 1, 0);
- my $vbox3 = Gtk3::VBox->new(0, 0);
+ my $vbox3 = Gtk3::Box->new('vertical', 0);
$vbox2->pack_start($vbox3, 0, 0, 0);
- my $sep2 = Gtk3::HSeparator->new;
+ my $sep2 = Gtk3::Separator->new('horizontal');
$vbox3->pack_start($sep2, 0, 0, 0);
- $inbox = Gtk3::HBox->new(0, 0);
+ my $inbox = Gtk3::Box->new('horizontal', 0);
$vbox3->pack_start($inbox, 0, 0, 0);
$window->add($vbox);
+ $gtk_state->{window} = $window;
+ $gtk_state->{html_view} = $html_view;
+ $gtk_state->{inbox} = $inbox;
+ $gtk_state->{prev_btn} = $prev_btn;
+ $gtk_state->{next_btn} = $next_btn;
+ $gtk_state->{progress_bar} = Gtk3::ProgressBar->new();
+ $gtk_state->{progress_status} = Gtk3::Label->new('');
+ $gtk_state->{abort_btn} = $abort;
+ $gtk_state->{disk_selection} = {};
+
+ Proxmox::UI::init_gtk($gtk_state, $iso_env);
+
$window->show_all;
- $window->realize();
+ $window->present();
}
sub cleanup_view {
- $inbox->foreach(sub {
+ $gtk_state->{inbox}->foreach(sub {
my $child = shift;
- $inbox->remove ($child);
+ $gtk_state->{inbox}->remove ($child);
});
}
my $label = Gtk3::Label->new($text);
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$hbox->pack_start($label, 0, 0, 10);
my $e1 = Gtk3::Entry->new();
$e1->set_width_chars(35);
return ($hbox, $e1);
}
sub create_cidr_inputs {
- my ($default_ip, $default_mask) = @_;
+ my ($cidr) = @_;
+
+ my ($default_ip, $default_mask) = split('/', $cidr);
my $hbox = Gtk3::Box->new('horizontal', 0);
my $label = Gtk3::Label->new('IP Address (CIDR)');
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$hbox->pack_start($label, 0, 0, 10);
my $ip_el = Gtk3::Entry->new();
$label = Gtk3::Label->new('/');
$label->set_size_request(10, -1);
- $label->set_alignment(0.5, 0.5);
$hbox->pack_start($label, 0, 0, 2);
my $cidr_el = Gtk3::Entry->new();
return ($hbox, $ip_el, $cidr_el);
}
-sub display_message {
- my ($msg) = @_;
-
- my $dialog = Gtk3::MessageDialog->new($window, 'modal', 'info', 'ok', $msg);
- $dialog->run();
- $dialog->destroy();
-}
-
-sub display_error {
- my ($msg) = @_;
-
- my $dialog = Gtk3::MessageDialog->new($window, 'modal', 'error', 'ok', $msg);
- $dialog->run();
- $dialog->destroy();
-}
-
-sub display_prompt {
- my ($query) = @_;
-
- my $dialog = Gtk3::MessageDialog->new($window, 'modal', 'question', 'ok-cancel', $query);
- my $response = $dialog->run();
- $dialog->destroy();
-
- return $response;
-}
-
my $ipconf_first_view = 1;
sub create_ipconf_view {
cleanup_view();
- display_html();
+ Proxmox::UI::display_html('ipconf.htm');
my $vcontainer = Gtk3::Box->new('vertical', 0);
- $inbox->pack_start($vcontainer, 1, 0, 0);
+ $gtk_state->{inbox}->pack_start($vcontainer, 1, 0, 0);
my $hcontainer = Gtk3::Box->new('horizontal', 0);
$vcontainer->pack_start($hcontainer, 0, 0, 10);
my $vbox = Gtk3::Box->new('vertical', 0);
$hcontainer->add($vbox);
- my $ipaddr_text = $config->{ipaddress} // "192.168.100.2";
- my $netmask_text = $config->{netmask} // "24";
- my $cidr_box;
- ($cidr_box, $ipconf_entry_addr, $ipconf_entry_mask) =
- create_cidr_inputs($ipaddr_text, $netmask_text);
+ my $cidr = Proxmox::Install::Config::get_cidr() // '192.168.100.2/24';
- my $device_cb = Gtk3::ComboBoxText->new();
+ my ($cidr_box, $ipconf_entry_addr, $ipconf_entry_mask) = create_cidr_inputs($cidr);
+
+ my $device_model = Gtk3::ListStore->new('Glib::String', 'Glib::String');
+ my $device_cb = Gtk3::ComboBox->new_with_model($device_model);
$device_cb->set_active(0);
$device_cb->set_visible(1);
+ my $icon_cell = Gtk3::CellRendererText->new();
+ $device_cb->pack_start($icon_cell, 0);
+ $device_cb->add_attribute($icon_cell, 'text', 0);
+ $icon_cell->set_property('foreground', 'green');
+
+ my $cell = Gtk3::CellRendererText->new();
+ $device_cb->pack_start($cell, 0);
+ $device_cb->add_attribute($cell, 'text', 1);
+
my $get_device_desc = sub {
my $iface = shift;
return "$iface->{name} - $iface->{mac} ($iface->{driver})";
};
- my $device_active_map = {};
- my $device_active_reverse_map = {};
+ my $run_env = Proxmox::Install::RunEnv::get();
+ my $ipconf = $run_env->{ipconf};
+
+ my ($device_active_map, $device_active_reverse_map) = ({}, {});
my $device_change_handler = sub {
my $current = shift;
my $new = $device_active_map->{$current->get_active()};
- return if defined($ipconf->{selected}) && $new eq $ipconf->{selected};
+ my $selected = Proxmox::Install::Config::get_mngmt_nic_id();
+ return if defined($selected) && $new eq $selected;
- $ipconf->{selected} = $new;
- my $iface = $ipconf->{ifaces}->{$ipconf->{selected}};
- $config->{mngmt_nic} = $iface->{name};
+ Proxmox::Install::Config::set_mngmt_nic_id($new);
+ my $iface = $ipconf->{ifaces}->{$new};
+ Proxmox::Install::Config::set_mngmt_nic($iface->{name});
$ipconf_entry_addr->set_text($iface->{inet}->{addr} || $iface->{inet6}->{addr})
if $iface->{inet}->{addr} || $iface->{inet6}->{addr};
$ipconf_entry_mask->set_text($iface->{inet}->{prefix} || $iface->{inet6}->{prefix})
};
my $i = 0;
- foreach my $index (sort keys %{$ipconf->{ifaces}}) {
- $device_cb->append_text(&$get_device_desc($ipconf->{ifaces}->{$index}));
+ for my $index (sort keys $ipconf->{ifaces}->%*) {
+ my $iface = $ipconf->{ifaces}->{$index};
+ my $iter = $device_model->append();
+ my $symbol = "$iface->{state}" eq "UP" ? "\x{25CF}" : ' ';
+ $device_model->set($iter,
+ 0 => $symbol,
+ 1 => $get_device_desc->($iface),
+ );
$device_active_map->{$i} = $index;
- $device_active_reverse_map->{$ipconf->{ifaces}->{$index}->{name}} = $i;
+ $device_active_reverse_map->{$iface->{name}} = $i;
if ($ipconf_first_view && $index == $ipconf->{default}) {
$device_cb->set_active($i);
&$device_change_handler($device_cb);
$i++;
}
- if (my $nic = $config->{mngmt_nic}) {
+ if (my $nic = Proxmox::Install::Config::get_mngmt_nic()) {
$device_cb->set_active($device_active_reverse_map->{$nic} // 0);
} else {
$device_cb->set_active(0);
}
- my $devicebox = Gtk3::HBox->new(0, 0);
+ my $devicebox = Gtk3::Box->new('horizontal', 0);
my $label = Gtk3::Label->new("Management Interface:");
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$devicebox->pack_start($label, 0, 0, 10);
$devicebox->pack_start($device_cb, 0, 0, 0);
$vbox->pack_start($devicebox, 0, 0, 2);
- my $hn = $config->{fqdn} // "$setup->{product}." . ($ipconf->{domain} // "example.invalid");
+ my $fqdn = Proxmox::Install::Config::get_fqdn();
+ my $hostname = $run_env->{network}->{hostname} || $iso_env->{product};
+ my $domain = $ipconf->{domain} || "example.invalid";
+ $fqdn //= "$hostname.$domain";
- my ($hostbox, $hostentry) = create_text_input($hn, 'Hostname (FQDN):');
+ my ($hostbox, $hostentry) = create_text_input($fqdn, 'Hostname (FQDN):');
$vbox->pack_start($hostbox, 0, 0, 2);
$vbox->pack_start($cidr_box, 0, 0, 2);
- $gateway = $config->{gateway} // $ipconf->{gateway} || '192.168.100.1';
-
- my $gwbox;
- ($gwbox, $ipconf_entry_gw) =
- create_text_input($gateway, 'Gateway:');
+ my $cfg_gateway = Proxmox::Install::Config::get_gateway();
+ my $gateway = $cfg_gateway // $ipconf->{gateway} || '192.168.100.1';
+ my ($gwbox, $ipconf_entry_gw) = create_text_input($gateway, 'Gateway:');
$vbox->pack_start($gwbox, 0, 0, 2);
- $dnsserver = $config->{dnsserver} // $ipconf->{dnsserver} || $gateway;
+ my $cfg_dns = Proxmox::Install::Config::get_dns();
+ my $dnsserver = $cfg_dns // $ipconf->{dnsserver} || $gateway;
- my $dnsbox;
- ($dnsbox, $ipconf_entry_dns) =
- create_text_input($dnsserver, 'DNS Server:');
+ my ($dnsbox, $ipconf_entry_dns) = create_text_input($dnsserver, 'DNS Server:');
$vbox->pack_start($dnsbox, 0, 0, 0);
- $inbox->show_all;
+ $gtk_state->{inbox}->show_all;
set_next(undef, sub {
-
# verify hostname
-
my $text = $hostentry->get_text();
-
$text =~ s/^\s+//;
$text =~ s/\s+$//;
- $config->{fqdn} = $text;
-
- my $namere = "([a-zA-Z0-9]([a-zA-Z0-9\-]*[a-zA-Z0-9])?)";
-
# Debian does not support purely numeric hostnames
if ($text && $text =~ /^[0-9]+(?:\.|$)/) {
- display_message("Purely numeric hostnames are not allowed.");
+ Proxmox::UI::message("Purely numeric hostnames are not allowed.");
$hostentry->grab_focus();
return;
}
- if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.example.invalid$/ &&
- $text =~ m/^([^\.]+)\.(\S+)$/) {
- $hostname = $1;
- $domain = $2;
+ if ($text
+ && $text =~ m/^${Proxmox::Sys::Net::FQDN_RE}$/
+ && $text !~ m/.example.invalid$/
+ && $text =~ m/^([^\.]+)\.(\S+)$/
+ ) {
+ Proxmox::Install::Config::set_hostname($1);
+ Proxmox::Install::Config::set_domain($2);
} else {
- display_message("Hostname does not look like a fully qualified domain name.");
+ Proxmox::UI::message("Hostname does not look like a fully qualified domain name.");
$hostentry->grab_focus();
return;
}
# verify ip address
$text = $ipconf_entry_addr->get_text();
- ($ipaddress, $ipversion) = parse_ip_address($text);
+ my ($ipaddress, $ipversion) = parse_ip_address($text);
if (!defined($ipaddress)) {
- display_message("IP address is not valid.");
+ Proxmox::UI::message("IP address is not valid.");
$ipconf_entry_addr->grab_focus();
return;
}
- $config->{ipaddress} = $ipaddress;
$text = $ipconf_entry_mask->get_text();
- $netmask = parse_ip_mask($text, $ipversion);
+ my $netmask = parse_ip_mask($text, $ipversion);
if (!defined($netmask)) {
- display_message("Netmask is not valid.");
+ Proxmox::UI::message("Netmask is not valid.");
$ipconf_entry_mask->grab_focus();
return;
}
- $cidr = "$ipaddress/$netmask";
- $config->{netmask} = $netmask;
+ Proxmox::Install::Config::set_cidr("$ipaddress/$netmask");
$text = $ipconf_entry_gw->get_text();
my ($gateway_ip, $gateway_ip_version) = parse_ip_address($text);
my $msg = defined($gateway_ip)
? "Gateway and host IP version must not differ (IPv$gateway_ip_version != IPv$ipversion)."
: "Gateway is not valid.";
- display_message($msg);
+ Proxmox::UI::message($msg);
$ipconf_entry_gw->grab_focus();
return;
}
- $config->{gateway} = $gateway = $gateway_ip;
+ Proxmox::Install::Config::set_gateway($gateway_ip);
$text = $ipconf_entry_dns->get_text();
my ($dns_ip, $dns_ip_version) = parse_ip_address($text);
if (!defined($dns_ip) || $dns_ip_version != $ipversion) {
- my $msg = defined($gateway_ip)
- ? "DNS and host IP version must not differ (IPv$gateway_ip_version != IPv$ipversion)."
+ my $msg = defined($dns_ip)
+ ? "DNS and host IP version must not differ (IPv$dns_ip_version != IPv$ipversion)."
: "DNS IP is not valid.";
- display_message($msg);
+ Proxmox::UI::message($msg);
$ipconf_entry_dns->grab_focus();
return;
}
- $config->{dnsserver} = $dnsserver = $dns_ip;
+ Proxmox::Install::Config::set_dns($dns_ip);
- #print "TEST $ipaddress $netmask $gateway $dnsserver\n";
+ #print STDERR "TEST $ipaddress/$netmask $gateway_ip $dns_ip\n";
$step_number++;
create_ack_view();
cleanup_view();
- my $vbox = Gtk3::VBox->new(0, 0);
- $inbox->pack_start($vbox, 1, 0, 0);
+ my $vbox = Gtk3::Box->new('vertical', 0);
+ $gtk_state->{inbox}->pack_start($vbox, 1, 0, 0);
my $reboot_checkbox = Gtk3::CheckButton->new('Automatically reboot after successful installation');
$reboot_checkbox->set_active(1);
$reboot_checkbox->signal_connect ("toggled" => sub {
my $cb = shift;
- $config_options->{autoreboot} = $cb->get_active();
+ Proxmox::Install::Config::set_autoreboot(!!$cb->get_active());
});
$vbox->pack_start($reboot_checkbox, 0, 0, 2);
+ my $proxmox_libdir = $iso_env->{locations}->{lib};
my $ack_template = "${proxmox_libdir}/html/ack_template.htm";
- my $ack_html = "${proxmox_libdir}/html/$setup->{product}/$steps[$step_number]->{html}";
+ my $ack_html = "${proxmox_libdir}/html/$iso_env->{product}/$steps[$step_number]->{html}";
my $html_data = file_read_all($ack_template);
+ my $country = Proxmox::Install::Config::get_country();
+
my %config_values = (
- __target_hd__ => join(' | ', @{$config_options->{target_hds}}),
- __target_fs__ => $config_options->{filesys},
- __country__ => $cmap->{country}->{$country}->{name},
- __timezone__ => $timezone,
- __keymap__ => $keymap,
- __mailto__ => $mailto,
- __interface__ => $ipconf->{ifaces}->{$ipconf->{selected}}->{name},
- __hostname__ => $hostname,
- __ip__ => $ipaddress,
- __cidr__ => $cidr,
- __netmask__ => $netmask,
- __gateway__ => $gateway,
- __dnsserver__ => $dnsserver,
+ __target_hd__ => join(' | ', $target_hds->@*),
+ __target_fs__ => Proxmox::Install::Config::get_filesys(),
+ __country__ => $iso_env->{locales}->{country}->{$country}->{name},
+ __timezone__ => Proxmox::Install::Config::get_timezone(),
+ __keymap__ => Proxmox::Install::Config::get_keymap(),
+ __mailto__ => Proxmox::Install::Config::get_mailto(),
+ __interface__ => Proxmox::Install::Config::get_mngmt_nic(),
+ __hostname__ => Proxmox::Install::Config::get_hostname(),
+ __cidr__ => Proxmox::Install::Config::get_cidr(),
+ __gateway__ => Proxmox::Install::Config::get_gateway(),
+ __dnsserver__ => Proxmox::Install::Config::get_dns(),
);
while (my ($k, $v) = each %config_values) {
$html_data =~ s/$k/$v/g;
}
+ eval {
+ my $config = Proxmox::Install::Config::get();
+ file_write_all(
+ "$iso_env->{locations}->{run}/config-ack.json",
+ to_json($config, { utf8 => 1, canonical => 1 }) ."\n",
+ );
+ };
+ warn "failed to write config-for-ack - $@" if $@;
+
file_write_all($ack_html, $html_data);
- display_html();
+ Proxmox::UI::display_html('ack.htm');
- $inbox->show_all;
+ $gtk_state->{inbox}->show_all;
set_next(undef, sub {
$step_number++;
my $ind;
my $def;
my $i = 0;
- my $kmaphash = $cmap->{kmaphash};
+ my $kmaphash = $iso_env->{locales}->{kmaphash};
foreach my $layout (sort keys %$kmaphash) {
$def = $i if $kmaphash->{$layout} eq 'en-us';
$ind = $i if $kmap && $kmaphash->{$layout} eq $kmap;
sub update_zonelist {
my ($box, $cc) = @_;
- my $cczones = $cmap->{cczones};
- my $zones = $cmap->{zones};
-
- my $sel;
+ my $sel = Proxmox::Install::Config::get_timezone(); # initial default
if ($lastzonecb) {
$sel = $lastzonecb->get_active_text();
- $box->remove ($lastzonecb);
- } else {
- $sel = $timezone; # used once to select default
+ $box->remove($lastzonecb);
}
my $cb = $lastzonecb = Gtk3::ComboBoxText->new();
$cb->set_size_request(200, -1);
-
$cb->signal_connect('changed' => sub {
- $timezone = $cb->get_active_text();
+ my $timezone = $cb->get_active_text();
+ Proxmox::Install::Config::set_timezone($timezone);
});
- my @za;
- if ($cc && defined ($cczones->{$cc})) {
- @za = keys %{$cczones->{$cc}};
- } else {
- @za = keys %$zones;
- }
- my $ind;
- my $i = 0;
- foreach my $zone (sort @za) {
- $ind = $i if $sel && $zone eq $sel;
+ my ($cczones, $zones) = $iso_env->{locales}->@{'cczones', 'zones'};
+ my @available_zones = $cc && defined($cczones->{$cc}) ? keys %{$cczones->{$cc}} : keys %$zones;
+
+ my ($i, $selected_index) = (0, undef);
+ for my $zone (sort @available_zones) {
+ $selected_index = $i if $sel && $zone eq $sel;
$cb->append_text($zone);
$i++;
}
# Append UTC here, so it is always the last item and never the default for any country.
$cb->append_text('UTC');
- $cb->set_active($ind || 0);
+ $cb->set_active($selected_index || 0);
$cb->show;
$box->pack_start($cb, 0, 0, 0);
cleanup_view();
- my $vbox2 = Gtk3::VBox->new(0, 0);
- $inbox->pack_start($vbox2, 1, 0, 0);
- my $vbox = Gtk3::VBox->new(0, 0);
+ my $password = Proxmox::Install::Config::get_password();
+
+ my $vbox2 = Gtk3::Box->new('vertical', 0);
+ $gtk_state->{inbox}->pack_start($vbox2, 1, 0, 0);
+ my $vbox = Gtk3::Box->new('vertical', 0);
$vbox2->pack_start($vbox, 0, 0, 10);
- my $hbox1 = Gtk3::HBox->new(0, 0);
+ my $hbox1 = Gtk3::Box->new('horizontal', 0);
my $label = Gtk3::Label->new("Password");
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$hbox1->pack_start($label, 0, 0, 10);
my $pwe1 = Gtk3::Entry->new();
$pwe1->set_visibility(0);
$pwe1->set_size_request(200, -1);
$hbox1->pack_start($pwe1, 0, 0, 0);
- my $hbox2 = Gtk3::HBox->new(0, 0);
+ my $hbox2 = Gtk3::Box->new('horizontal', 0);
$label = Gtk3::Label->new("Confirm");
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$hbox2->pack_start($label, 0, 0, 10);
my $pwe2 = Gtk3::Entry->new();
$pwe2->set_visibility(0);
$pwe2->set_size_request(200, -1);
$hbox2->pack_start($pwe2, 0, 0, 0);
- my $hbox3 = Gtk3::HBox->new(0, 0);
+ my $hbox3 = Gtk3::Box->new('horizontal', 0);
$label = Gtk3::Label->new("Email");
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$hbox3->pack_start($label, 0, 0, 10);
my $eme = Gtk3::Entry->new();
$eme->set_size_request(200, -1);
- $eme->set_text($mailto);
+ $eme->set_text(Proxmox::Install::Config::get_mailto());
$hbox3->pack_start($eme, 0, 0, 0);
$vbox->pack_start($hbox2, 0, 0, 5);
$vbox->pack_start($hbox3, 0, 0, 15);
- $inbox->show_all;
+ $gtk_state->{inbox}->show_all;
- display_html();
+ Proxmox::UI::display_html('passwd.htm');
set_next (undef, sub {
my $t2 = $pwe2->get_text;
if (length ($t1) < 5) {
- display_message("Password is too short.");
+ Proxmox::UI::message("Password is too short.");
$pwe1->grab_focus();
return;
}
if ($t1 ne $t2) {
- display_message("Password does not match.");
+ Proxmox::UI::message("Password does not match.");
$pwe1->grab_focus();
return;
}
my $t3 = $eme->get_text;
if ($t3 !~ m/^[\w\+\-\~]+(\.[\w\+\-\~]+)*@[a-zA-Z0-9\-]+(\.[a-zA-Z0-9\-]+)*$/) {
- display_message("Email does not look like a valid address" .
- " (user\@domain.tld)");
+ Proxmox::UI::message("Email does not look like a valid address (user\@domain.tld)");
$eme->grab_focus();
return;
}
if ($t3 eq 'mail@example.invalid') {
- display_message("Please enter a valid Email address");
+ Proxmox::UI::message("Please enter a valid Email address");
$eme->grab_focus();
return;
}
- $password = $t1;
- $mailto = $t3;
+ Proxmox::Install::Config::set_password($t1);
+ Proxmox::Install::Config::set_mailto($t3);
$step_number++;
create_ipconf_view();
cleanup_view();
- my $countryhash = $cmap->{countryhash};
- my $ctr = $cmap->{country};
+ my $locales = $iso_env->{locales};
- my $vbox2 = Gtk3::VBox->new(0, 0);
- $inbox->pack_start($vbox2, 1, 0, 0);
- my $vbox = Gtk3::VBox->new(0, 0);
+ my $vbox2 = Gtk3::Box->new('vertical', 0);
+ $gtk_state->{inbox}->pack_start($vbox2, 1, 0, 0);
+ my $vbox = Gtk3::Box->new('vertical', 0);
$vbox2->pack_start($vbox, 0, 0, 10);
my $w = Gtk3::Entry->new();
$c->set_popup_set_width(1);
$c->set_inline_completion(1);
- my $hbox2 = Gtk3::HBox->new(0, 0);
+ my $hbox2 = Gtk3::Box->new('horizontal', 0);
my $label = Gtk3::Label->new("Time zone");
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$hbox2->pack_start($label, 0, 0, 10);
update_zonelist ($hbox2);
- my $hbox3 = Gtk3::HBox->new(0, 0);
+ my $hbox3 = Gtk3::Box->new('horizontal', 0);
$label = Gtk3::Label->new("Keyboard Layout");
$label->set_size_request(150, -1);
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$hbox3->pack_start($label, 0, 0, 10);
my $kmapcb = Gtk3::ComboBoxText->new();
$kmapcb->set_size_request (200, -1);
- foreach my $layout (sort keys %{$cmap->{kmaphash}}) {
- $kmapcb->append_text ($layout);
+ for my $layout (sort keys %{$locales->{kmaphash}}) {
+ $kmapcb->append_text($layout);
}
update_layout($kmapcb);
$kmapcb->signal_connect ('changed' => sub {
my $sel = $kmapcb->get_active_text();
$last_layout = $kmapcb->get_active();
- if (my $kmap = $cmap->{kmaphash}->{$sel}) {
- my $xkmap = $cmap->{kmap}->{$kmap}->{x11};
- my $xvar = $cmap->{kmap}->{$kmap}->{x11var};
- $keymap = $kmap;
+ if (my $kmap = $locales->{kmaphash}->{$sel}) {
+ my $xkmap = $locales->{kmap}->{$kmap}->{x11};
+ my $xvar = $locales->{kmap}->{$kmap}->{x11var};
- return if (defined($installer_kmap) && $installer_kmap eq $kmap);
+ Proxmox::Install::Config::set_keymap($kmap);
- $installer_kmap = $keymap;
+ return if (defined($installer_kmap) && $installer_kmap eq $kmap);
+ $installer_kmap = $kmap;
if (!is_test_mode()) {
- syscmd ("setxkbmap $xkmap $xvar");
+ syscmd("setxkbmap $xkmap $xvar");
my $kbd_config = qq{
XKBLAYOUT="$xkmap"
my ($entry, $event) = @_;
my $text = $entry->get_text;
- if (my $cc = $countryhash->{lc($text)}) {
+ if (my $cc = $locales->{countryhash}->{lc($text)}) {
update_zonelist($hbox2, $cc);
- my $kmap = $ctr->{$cc}->{kmap} || 'en-us';
+ my $kmap = $locales->{country}->{$cc}->{kmap} || 'en-us';
update_layout($kmapcb, $kmap);
}
});
my $val = $event->get_keyval;
if ($val == Gtk3::Gdk::KEY_Tab) {
- my $cc = $countryhash->{lc($text)};
+ my $cc = $locales->{countryhash}->{lc($text)};
my $found = 0;
my $compl;
if ($cc) {
$found = 1;
- $compl = $ctr->{$cc}->{name};
+ $compl = $locales->{country}->{$cc}->{name};
} else {
- foreach my $cc (keys %$ctr) {
- my $ct = $ctr->{$cc}->{name};
- if ($ct =~ m/^\Q$text\E.*$/i) {
+ for my $country (values $locales->{country}->%*) {
+ if ($country->{name} =~ m/^\Q$text\E.*$/i) {
$found++;
- $compl = $ct;
+ $compl = $country->{name};
}
last if $found > 1;
}
$c->complete();
return undef;
} else {
- #Gtk3::Gdk::beep();
- print chr(7); # beep ?
+ # beep ?
}
$c->complete();
return undef;
});
- my $ls = Gtk3::ListStore->new('Glib::String');
- foreach my $cc (sort {$ctr->{$a}->{name} cmp $ctr->{$b}->{name} } keys %$ctr) {
- my $iter = $ls->append();
- $ls->set ($iter, 0, $ctr->{$cc}->{name});
+ my $country_store = Gtk3::ListStore->new('Glib::String');
+ my $countries = $locales->{country};
+ for my $cc (sort { $countries->{$a}->{name} cmp $countries->{$b}->{name} } keys %$countries) {
+ my $iter = $country_store->append();
+ $country_store->set($iter, 0, $countries->{$cc}->{name});
}
- $c->set_model ($ls);
+ $c->set_model($country_store);
$w->set_completion ($c);
- my $hbox = Gtk3::HBox->new(0, 0);
+ my $hbox = Gtk3::Box->new('horizontal', 0);
$label = Gtk3::Label->new("Country");
- $label->set_alignment(1, 0.5);
+ $label->set_xalign(1.0);
$label->set_size_request(150, -1);
$hbox->pack_start($label, 0, 0, 10);
$hbox->pack_start($w, 0, 0, 0);
$vbox->pack_start($hbox2, 0, 0, 5);
$vbox->pack_start($hbox3, 0, 0, 5);
- if ($country && $ctr->{$country}) {
- $w->set_text ($ctr->{$country}->{name});
+ my $country = Proxmox::Install::Config::get_country();
+ if ($country && (my $entry = $locales->{country}->{$country})) {
+ $w->set_text($entry->{name});
}
- $inbox->show_all;
+ $gtk_state->{inbox}->show_all;
- display_html();
+ Proxmox::UI::display_html('country.htm');
set_next (undef, sub {
my $text = $w->get_text;
- if (my $cc = $countryhash->{lc($text)}) {
- $country = $cc;
+ if (my $cc = $locales->{countryhash}->{lc($text)}) {
+ Proxmox::Install::Config::set_country($cc);
$step_number++;
create_password_view();
return;
} else {
- display_message("Please select a country first.");
+ Proxmox::UI::message("Please select a country first.");
$w->grab_focus();
}
});
my $widget = @$labeled_widgets[$i+1];
my $label = Gtk3::Label->new(@$labeled_widgets[$i]);
$label->set_visible(1);
- $label->set_alignment (1, 0.5);
+ $label->set_xalign(1.0);
$grid->attach($label, 0, $row, 1, 1);
$widget->set_visible(1);
$grid->attach($widget, 1, $row, 1, 1);
return $hdsize if defined($hdsize);
# compute the smallest disk size of the actually selected disks
- my $hd_count = scalar(@$hds);
- for (my $i = 0; $i < $hd_count; $i++) {
- my $cur_hd = $config_options->{"disksel$i"} // next;
+ my $cached_disks = get_cached_disks();
+ my $disk_count = scalar(@$cached_disks);
+ for (my $i = 0; $i < $disk_count; $i++) {
+ my $cur_hd = $gtk_state->{disk_selection}->{$i} // next;
my $disksize = int(@$cur_hd[2] / (2 * 1024 * 1024.0)); # size in GB
$hdsize //= $disksize;
$hdsize = $disksize if $disksize < $hdsize;
}
- if (my $cfg_hdsize = $config_options->{hdsize}) {
+ if (my $cfg_hdsize = Proxmox::Install::Config::get_hdsize()) {
# had the dialog open previously and set an even lower size than the disk selection allows
$hdsize = $cfg_hdsize if $cfg_hdsize < $hdsize;
}
my sub create_hdsize_adjustment {
my ($hdsize) = @_;
$hdsize = $get_selected_hdsize->($hdsize);
+ my $cfg_hdsize = Proxmox::Install::Config::get_hdsize();
# params are: initial value, lower, upper, step increment, page increment, page size
- return Gtk3::Adjustment->new($config_options->{hdsize} || $hdsize, 0, $hdsize+1, 1, 1, 1);
+ return Gtk3::Adjustment->new($cfg_hdsize || $hdsize, 0, $hdsize+1, 1, 1, 1);
}
my sub get_hdsize_spin_button {
my $create_raid_disk_grid = sub {
my ($hdsize_buttons) = @_;
- my $hd_count = scalar(@$hds);
+ my $cached_disks = get_cached_disks();
+ my $disk_count = scalar(@$cached_disks);
my $disk_labeled_widgets = [];
- for (my $i = 0; $i < $hd_count; $i++) {
+ for (my $i = 0; $i < $disk_count; $i++) {
my $disk_selector = Gtk3::ComboBoxText->new();
$disk_selector->append_text("-- do not use --");
$disk_selector->set_active(0);
$disk_selector->set_visible(1);
- foreach my $hd (@$hds) {
+ for my $hd (@$cached_disks) {
my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
- $disk_selector->append_text(get_device_desc ($devname, $size, $model));
+ $disk_selector->append_text(get_device_desc($devname, $size, $model));
}
$disk_selector->{pve_disk_id} = $i;
my $w = shift;
my $diskid = $w->{pve_disk_id};
my $a = $w->get_active - 1;
- $config_options->{"disksel${diskid}"} = ($a >= 0) ? $hds->[$a] : undef;
+ $gtk_state->{disk_selection}->{$diskid} = ($a >= 0) ? $cached_disks->[$a] : undef;
for my $btn (@$hdsize_buttons) {
update_hdsize_adjustment($btn->get_adjustment());
}
});
if ($hdoption_first_setup) {
- $disk_selector->set_active ($i+1) if $hds->[$i];
+ $disk_selector->set_active ($i+1) if $cached_disks->[$i];
} else {
my $hdind = 0;
- if (my $cur_hd = $config_options->{"disksel$i"}) {
- foreach my $hd (@$hds) {
+ if (my $cur_hd = $gtk_state->{disk_selection}->{$i}) {
+ foreach my $hd (@$cached_disks) {
if (@$hd[1] eq @$cur_hd[1]) {
$disk_selector->set_active($hdind+1);
last;
}
my $clear_all_button = Gtk3::Button->new('_Deselect All');
- if ($hd_count > 3) {
+ if ($disk_count > 3) {
$clear_all_button->signal_connect('clicked', sub {
my $is_widget = 0;
for my $disk_selector (@$disk_labeled_widgets) {
my $scrolled_window = Gtk3::ScrolledWindow->new();
$scrolled_window->set_hexpand(1);
- $scrolled_window->set_propagate_natural_height(1) if $hd_count > 4;
+ $scrolled_window->set_propagate_natural_height(1) if $disk_count > 4;
my $diskgrid = $create_label_widget_grid->($disk_labeled_widgets);
$spinbutton_ashift->set_tooltip_text("zpool ashift property (pool sector size, default 2^12)");
$spinbutton_ashift->signal_connect ("value-changed" => sub {
my $w = shift;
- $config_options->{ashift} = $w->get_value_as_int();
+ Proxmox::Install::Config::set_zfs_opt('ashift', $w->get_value_as_int());
});
- $config_options->{ashift} = 12 if ! defined($config_options->{ashift});
- $spinbutton_ashift->set_value($config_options->{ashift});
+ my $ashift = Proxmox::Install::Config::get_zfs_opt('ashift') // 12;
+ $spinbutton_ashift->set_value($ashift);
push @$labeled_widgets, "ashift";
push @$labeled_widgets, $spinbutton_ashift;
foreach my $opt (@$comp_opts) {
$combo_compress->append($opt, $opt);
}
- $config_options->{compress} = "on" if !defined($config_options->{compress});
- $combo_compress->set_active_id($config_options->{compress});
+ my $compress = Proxmox::Install::Config::get_zfs_opt('compress') // 'on';
+ $combo_compress->set_active_id($compress);
$combo_compress->signal_connect (changed => sub {
my $w = shift;
- $config_options->{compress} = $w->get_active_text();
+ Proxmox::Install::Config::set_zfs_opt('compress', $w->get_active_text());
});
push @$labeled_widgets, "compress";
push @$labeled_widgets, $combo_compress;
foreach my $opt (@$csum_opts) {
$combo_checksum->append($opt, $opt);
}
- $config_options->{checksum} = "on" if !($config_options->{checksum});
- $combo_checksum->set_active_id($config_options->{checksum});
+ my $checksum = Proxmox::Install::Config::get_zfs_opt('checksum') // 'on';
+ $combo_checksum->set_active_id($checksum);
$combo_checksum->signal_connect (changed => sub {
my $w = shift;
- $config_options->{checksum} = $w->get_active_text();
+ Proxmox::Install::Config::set_zfs_opt('checksum', $w->get_active_text());
});
push @$labeled_widgets, "checksum";
push @$labeled_widgets, $combo_checksum;
$spinbutton_copies->set_tooltip_text("zfs copies property for rpool dataset (in addition to RAID redundancy!)");
$spinbutton_copies->signal_connect ("value-changed" => sub {
my $w = shift;
- $config_options->{copies} = $w->get_value_as_int();
+ Proxmox::Install::Config::set_zfs_opt('copies', $w->get_value_as_int());
});
- $config_options->{copies} = 1 if !defined($config_options->{copies});
- $spinbutton_copies->set_value($config_options->{copies});
+ my $copies = Proxmox::Install::Config::get_zfs_opt('copies') // 1;
+ $spinbutton_copies->set_value($copies);
push @$labeled_widgets, "copies", $spinbutton_copies;
+ if ($iso_env->{product} eq 'pve') {
+ my $total_memory = Proxmox::Install::RunEnv::get('total_memory');
+
+ my $spinbutton_arc_max = Gtk3::SpinButton->new_with_range(
+ $Proxmox::Install::RunEnv::ZFS_ARC_MIN_SIZE_MIB, $total_memory, 1);
+ $spinbutton_arc_max->set_tooltip_text('Maximum ARC size in megabytes');
+ $spinbutton_arc_max->signal_connect('value-changed' => sub {
+ my $w = shift;
+ Proxmox::Install::Config::set_zfs_opt('arc_max', $w->get_value_as_int());
+ });
+ my $arc_max = Proxmox::Install::Config::get_zfs_opt('arc_max');
+ $spinbutton_arc_max->set_value($arc_max);
+ push @$labeled_widgets, "ARC max size", $spinbutton_arc_max;
+ }
+
push @$labeled_widgets, "hdsize", $hdsize_btn;
return $create_label_widget_grid->($labeled_widgets);;
};
# Filesystem type
my $label0 = Gtk3::Label->new("Filesystem");
- $label0->set_alignment (1, 0.5);
+ $label0->set_xalign(1.0);
$grid->attach($label0, 0, $row, 1, 1);
my $fstypecb = Gtk3::ComboBoxText->new();
'zfs (RAIDZ-3)',
];
push @$fstype, 'btrfs (RAID0)', 'btrfs (RAID1)', 'btrfs (RAID10)'
- if $setup->{enable_btrfs};
+ if $iso_env->{cfg}->{enable_btrfs};
+ my $filesys = Proxmox::Install::Config::get_filesys();
my $tcount = 0;
foreach my $tmp (@$fstype) {
$fstypecb->append_text($tmp);
- $fstypecb->set_active ($tcount) if $config_options->{filesys} eq $tmp;
+ $fstypecb->set_active ($tcount) if $filesys eq $tmp;
$tcount++;
}
$row++;
- my $sep = Gtk3::HSeparator->new();
+ my $sep = Gtk3::Separator->new('horizontal');
$sep->set_visible(1);
$grid->attach($sep, 0, $row, 2, 1);
$row++;
my $hdsize_labeled_widgets = [];
- # size compute
- my $hdsize = 0;
+ my $target_hd = Proxmox::Install::Config::get_target_hd();
+ my $hdsize = 0; # size compute
if ( -b $target_hd) {
- $hdsize = int(hd_size ($target_hd) / (1024 * 1024.0)); # size in GB
+ $hdsize = int(Proxmox::Sys::Block::hd_size($target_hd) / (1024 * 1024.0)); # size in GB
} elsif ($target_hd) {
$hdsize = int((-s $target_hd) / (1024 * 1024 * 1024.0));
}
my $entry_swapsize = Gtk3::Entry->new();
$entry_swapsize->set_tooltip_text("maximum SWAP size (GB)");
$entry_swapsize->signal_connect (key_press_event => \&check_float);
- $entry_swapsize->set_text($config_options->{swapsize}) if defined($config_options->{swapsize});
+ my $swapsize = Proxmox::Install::Config::get_swapsize();
+ $entry_swapsize->set_text($swapsize) if defined($swapsize);
push @$hdsize_labeled_widgets, "swapsize", $entry_swapsize;
my $entry_maxroot = Gtk3::Entry->new();
- if ($setup->{product} eq 'pve') {
+ if ($iso_env->{product} eq 'pve') {
$entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
$entry_maxroot->signal_connect (key_press_event => \&check_float);
- $entry_maxroot->set_text($config_options->{maxroot}) if $config_options->{maxroot};
+ if (my $maxroot = Proxmox::Install::Config::get_maxroot()) {
+ $entry_maxroot->set_text($maxroot);
+ }
push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
}
my $entry_minfree = Gtk3::Entry->new();
$entry_minfree->set_tooltip_text("minimum free LVM space (GB, required for LVM snapshots)");
$entry_minfree->signal_connect (key_press_event => \&check_float);
- $entry_minfree->set_text($config_options->{minfree}) if defined($config_options->{minfree});
+ if (defined(my $minfree = Proxmox::Install::Config::get_minfree())) {
+ $entry_minfree->set_text($minfree);
+ }
push @$hdsize_labeled_widgets, "minfree", $entry_minfree;
my $entry_maxvz;
- if ($setup->{product} eq 'pve') {
+ if ($iso_env->{product} eq 'pve') {
$entry_maxvz = Gtk3::Entry->new();
$entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
$entry_maxvz->signal_connect (key_press_event => \&check_float);
- $entry_maxvz->set_text($config_options->{maxvz}) if defined($config_options->{maxvz});
+ if (defined(my $maxvz = Proxmox::Install::Config::get_maxvz())) {
+ $entry_maxvz->set_text($maxvz);
+ }
push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
}
$hdoption_first_setup = 0;
my $switch_view = sub {
- my $raid = $config_options->{filesys} =~ m/zfs|btrfs/;
- my $is_zfs = $config_options->{filesys} =~ m/zfs/;
+ my $filesys = Proxmox::Install::Config::get_filesys();
+ my $raid = $filesys =~ m/zfs|btrfs/;
+ my $is_zfs = $filesys =~ m/zfs/;
$target_hd_combo->set_visible(!$raid);
$options_stack->get_child_by_name("hdsize")->set_visible(!$raid);
if ($raid) {
my $msg = "<b>Note</b>: " . ($is_zfs
? "ZFS is not compatible with hardware RAID controllers, for details see the documentation."
- : "BTRFS integration in $setup->{fullname} is a technology preview!"
+ : "BTRFS integration in $iso_env->{cfg}->{fullname} is a technology preview!"
);
$hw_raid_note->set_markup($msg);
}
$options_stack->get_child_by_name("raidzfsadvanced")->set_visible($is_zfs);
$options_stack->get_child_by_name("raidbtrfsadvanced")->set_visible(!$is_zfs);
if ($raid) {
- $target_hd_label->set_text("Target: $config_options->{filesys} ");
+ $target_hd_label->set_text("Target: $filesys ");
$options_stack->set_visible_child_name("raiddisk");
} else {
$target_hd_label->set_text("Target Harddisk: ");
&$switch_view();
$fstypecb->signal_connect (changed => sub {
- $config_options->{filesys} = $fstypecb->get_active_text();
+ my $new_filesys = $fstypecb->get_active_text();
+ Proxmox::Install::Config::set_filesys($new_filesys);
&$switch_view();
});
- my $sep2 = Gtk3::HSeparator->new();
+ my $sep2 = Gtk3::Separator->new('horizontal');
$sep2->set_visible(1);
$contarea->pack_end($sep2, 1, 1, 10);
my $tmp;
if (($tmp = &$get_float($spinbutton_hdsize)) && ($tmp != $hdsize)) {
- $config_options->{hdsize} = $tmp;
+ Proxmox::Install::Config::set_hdsize($tmp);
} else {
- delete $config_options->{hdsize};
+ Proxmox::Install::Config::set_hdsize(undef);
}
if (defined($tmp = &$get_float($entry_swapsize))) {
- $config_options->{swapsize} = $tmp;
+ Proxmox::Install::Config::set_swapsize($tmp);
} else {
- delete $config_options->{swapsize};
+ Proxmox::Install::Config::set_swapsize(undef);
}
if (defined($tmp = &$get_float($entry_maxroot))) {
- $config_options->{maxroot} = $tmp;
+ Proxmox::Install::Config::set_maxroot($tmp);
} else {
- delete $config_options->{maxroot};
+ Proxmox::Install::Config::set_maxroot(undef);
}
if (defined($tmp = &$get_float($entry_minfree))) {
- $config_options->{minfree} = $tmp;
+ Proxmox::Install::Config::set_minfree($tmp);
} else {
- delete $config_options->{minfree};
+ Proxmox::Install::Config::set_minfree(undef);
}
if ($entry_maxvz && defined($tmp = &$get_float($entry_maxvz))) {
- $config_options->{maxvz} = $tmp;
+ Proxmox::Install::Config::set_maxvz($tmp);
} else {
- delete $config_options->{maxvz};
+ Proxmox::Install::Config::set_maxvz(undef);
}
$dialog->destroy();
}
-my $get_raid_devlist = sub {
-
- my $dev_name_hash = {};
-
- my $devlist = [];
- for (my $i = 0; $i < @$hds; $i++) {
- if (my $hd = $config_options->{"disksel$i"}) {
- my ($disk, $devname, $size, $model, $logical_bsize) = @$hd;
- die "device '$devname' is used more than once\n"
- if $dev_name_hash->{$devname};
- $dev_name_hash->{$devname} = $hd;
- push @$devlist, $hd;
- }
- }
-
- return $devlist;
-};
-
-sub zfs_mirror_size_check {
- my ($expected, $actual) = @_;
-
- die "mirrored disks must have same size\n"
- if abs($expected - $actual) > $expected / 10;
-}
-
-sub legacy_bios_4k_check {
- my ($lbs) = @_;
- die "Booting from 4kn drive in legacy BIOS mode is not supported.\n"
- if (($boot_type ne 'efi') && ($lbs == 4096));
-}
-
-sub get_zfs_raid_setup {
- my $filesys = $config_options->{filesys};
-
- my $devlist = &$get_raid_devlist();
-
- my $diskcount = scalar(@$devlist);
- die "$filesys needs at least one device\n" if $diskcount < 1;
-
- my $cmd= '';
- if ($filesys eq 'zfs (RAID0)') {
- foreach my $hd (@$devlist) {
- legacy_bios_4k_check(@$hd[4]);
- $cmd .= " @$hd[1]";
- }
- } elsif ($filesys eq 'zfs (RAID1)') {
- die "zfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
- $cmd .= ' mirror ';
- my $hd = @$devlist[0];
- my $expected_size = @$hd[2]; # all disks need approximately same size
- foreach my $hd (@$devlist) {
- zfs_mirror_size_check($expected_size, @$hd[2]);
- legacy_bios_4k_check(@$hd[4]);
- $cmd .= " @$hd[1]";
- }
- } elsif ($filesys eq 'zfs (RAID10)') {
- die "zfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
- die "zfs (RAID10) needs an even number of devices\n" if $diskcount & 1;
-
- for (my $i = 0; $i < $diskcount; $i+=2) {
- my $hd1 = @$devlist[$i];
- my $hd2 = @$devlist[$i+1];
- zfs_mirror_size_check(@$hd1[2], @$hd2[2]); # pairs need approximately same size
- legacy_bios_4k_check(@$hd1[4]);
- legacy_bios_4k_check(@$hd2[4]);
- $cmd .= ' mirror ' . @$hd1[1] . ' ' . @$hd2[1];
- }
-
- } elsif ($filesys =~ m/^zfs \(RAIDZ-([123])\)$/) {
- my $level = $1;
- my $mindisks = 2 + $level;
- die "zfs (RAIDZ-$level) needs at least $mindisks devices\n" if scalar(@$devlist) < $mindisks;
- my $hd = @$devlist[0];
- my $expected_size = @$hd[2]; # all disks need approximately same size
- $cmd .= " raidz$level";
- foreach my $hd (@$devlist) {
- zfs_mirror_size_check($expected_size, @$hd[2]);
- legacy_bios_4k_check(@$hd[4]);
- $cmd .= " @$hd[1]";
- }
- } else {
- die "unknown zfs mode '$filesys'\n";
- }
-
- return ($devlist, $cmd);
-}
-
-sub get_btrfs_raid_setup {
-
- my $filesys = $config_options->{filesys};
-
- my $devlist = &$get_raid_devlist();
-
- my $diskcount = scalar(@$devlist);
- die "$filesys needs at least one device\n" if $diskcount < 1;
-
- my $mode;
-
- if ($diskcount == 1) {
- $mode = 'single';
- } else {
- if ($filesys eq 'btrfs (RAID0)') {
- $mode = 'raid0';
- } elsif ($filesys eq 'btrfs (RAID1)') {
- die "btrfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
- $mode = 'raid1';
- } elsif ($filesys eq 'btrfs (RAID10)') {
- die "btrfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
- $mode = 'raid10';
- } else {
- die "unknown btrfs mode '$filesys'\n";
- }
+sub apply_raid_disk_selection {
+ Proxmox::Install::Config::set_key('disk_selection', {}); # reset
+ for my $order (sort keys $gtk_state->{disk_selection}->%*) {
+ my $disk = $gtk_state->{disk_selection}->{$order} // next;
+ Proxmox::Install::Config::set_disk_selection($order, $disk->[0]);
}
-
- return ($devlist, $mode);
}
my $last_hd_selected = 0;
sub create_hdsel_view {
- $prev_btn->set_sensitive(1); # enable previous button at this point
+ $gtk_state->{prev_btn}->set_sensitive(1); # enable previous button at this point
cleanup_view();
- my $vbox = Gtk3::VBox->new(0, 0);
- $inbox->pack_start($vbox, 1, 0, 0);
- my $hbox = Gtk3::HBox->new(0, 0);
+ my $vbox = Gtk3::Box->new('vertical', 0);
+ $gtk_state->{inbox}->pack_start($vbox, 1, 0, 0);
+ my $hbox = Gtk3::Box->new('horizontal', 0);
$vbox->pack_start($hbox, 0, 0, 10);
- my ($disk, $devname, $size, $model, $logical_bsize) = @{@$hds[0]};
- $target_hd = $devname if !defined($target_hd);
+ my $cached_disks = get_cached_disks();
+ my ($disk, $devname, $size, $model, $logical_bsize) = $cached_disks->[0]->@*;
+ if (!defined(Proxmox::Install::Config::get_target_hd())) {
+ Proxmox::Install::Config::set_target_hd($devname);
+ }
$target_hd_label = Gtk3::Label->new("Target Harddisk: ");
$hbox->pack_start($target_hd_label, 0, 0, 0);
$target_hd_combo = Gtk3::ComboBoxText->new();
- foreach my $hd (@$hds) {
+ foreach my $hd ($cached_disks->@*) {
($disk, $devname, $size, $model, $logical_bsize) = @$hd;
$target_hd_combo->append_text(get_device_desc($devname, $size, $model));
}
- my $raid = $config_options->{filesys} =~ m/zfs|btrfs/;
+ my $raid = Proxmox::Install::Config::get_filesys() =~ m/zfs|btrfs/;
if ($raid) {
- $target_hd_label->set_text("Target: $config_options->{filesys} ");
+ my $filesys = Proxmox::Install::Config::get_filesys();
+ $target_hd_label->set_text("Target: $filesys ");
$target_hd_combo->set_visible(0);
$target_hd_combo->set_no_show_all(1);
}
$target_hd_combo->set_active($last_hd_selected);
$target_hd_combo->signal_connect(changed => sub {
$a = shift->get_active;
- my ($disk, $devname) = @{@$hds[$a]};
+ my ($disk, $devname) = @{@$cached_disks[$a]};
$last_hd_selected = $a;
- $target_hd = $devname;
+ Proxmox::Install::Config::set_target_hd($devname);
});
$hbox->pack_start($target_hd_combo, 0, 0, 10);
$hbox->pack_start ($options, 0, 0, 0);
- $inbox->show_all;
+ $gtk_state->{inbox}->show_all;
- display_html();
+ Proxmox::UI::display_html('page1.htm');
set_next(undef, sub {
-
- if ($config_options->{filesys} =~ m/zfs/) {
- my ($devlist) = eval { get_zfs_raid_setup() };
+ my $filesys = Proxmox::Install::Config::get_filesys();
+ if ($filesys =~ m/zfs/) {
+ apply_raid_disk_selection();
+ my ($devlist) = eval { Proxmox::Install::get_zfs_raid_setup() };
if (my $err = $@) {
- display_message("Warning: $err\nPlease fix ZFS setup first.");
+ Proxmox::UI::message("Warning: $err\nPlease fix ZFS setup first.");
return;
}
- $config_options->{target_hds} = [ map { $_->[1] } @$devlist ];
- } elsif ($config_options->{filesys} =~ m/btrfs/) {
- my ($devlist) = eval { get_btrfs_raid_setup() };
+ $target_hds = [ map { $_->[1] } @$devlist ];
+ } elsif ($filesys =~ m/btrfs/) {
+ apply_raid_disk_selection();
+ my ($devlist) = eval { Proxmox::Install::get_btrfs_raid_setup() };
if (my $err = $@) {
- display_message("Warning: $err\nPlease fix BTRFS setup first.");
+ Proxmox::UI::message("Warning: $err\nPlease fix BTRFS setup first.");
return;
}
- $config_options->{target_hds} = [ map { $_->[1] } @$devlist ];
+ $target_hds = [ map { $_->[1] } @$devlist ];
} else {
- eval { legacy_bios_4k_check(logical_blocksize($target_hd)) };
+ my $target_hd = Proxmox::Install::Config::get_target_hd();
+ eval {
+ my $target_block_size = Proxmox::Sys::Block::logical_blocksize($target_hd);
+ Proxmox::Install::legacy_bios_4k_check($target_block_size);
+ };
if (my $err = $@) {
- display_message("Warning: $err\n");
+ Proxmox::UI::message("Warning: $err\n");
return;
}
- $config_options->{target_hds} = [ $target_hd ];
+ $target_hds = [ $target_hd ];
}
$step_number++;
}
sub create_extract_view {
-
cleanup_view();
- display_info();
+ Proxmox::Install::display_info();
- $next->set_sensitive(0);
- $prev_btn->set_sensitive(0);
- $prev_btn->hide();
+ $gtk_state->{next_btn}->set_sensitive(0);
+ $gtk_state->{prev_btn}->set_sensitive(0);
+ $gtk_state->{prev_btn}->hide();
- my $vbox = Gtk3::VBox->new(0, 0);
- $inbox->pack_start ($vbox, 1, 0, 0);
- my $hbox = Gtk3::HBox->new(0, 0);
+ my $vbox = Gtk3::Box->new('vertical', 0);
+ $gtk_state->{inbox}->pack_start ($vbox, 1, 0, 0);
+ my $hbox = Gtk3::Box->new('horizontal', 0);
$vbox->pack_start ($hbox, 0, 0, 10);
- my $vbox2 = Gtk3::VBox->new(0, 0);
+ my $vbox2 = Gtk3::Box->new('vertical', 0);
$hbox->pack_start ($vbox2, 0, 0, 0);
- $progress_status = Gtk3::Label->new('');
- $vbox2->pack_start ($progress_status, 1, 1, 0);
-
- $progress = Gtk3::ProgressBar->new;
- $progress->set_show_text(1);
- $progress->set_size_request (600, -1);
+ $vbox2->pack_start($gtk_state->{progress_status}, 1, 1, 0);
- $vbox2->pack_start($progress, 0, 0, 0);
+ $gtk_state->{progress_bar}->set_show_text(1);
+ $gtk_state->{progress_bar}->set_size_request (600, -1);
- $inbox->show_all();
+ $vbox2->pack_start($gtk_state->{progress_bar}, 0, 0, 0);
- my $tdir = is_test_mode() ? "target" : "/target";
- mkdir $tdir;
- my $base = "${proxmox_cddir}/$setup->{product}-base.squashfs";
+ $gtk_state->{inbox}->show_all();
- eval { extract_data($base, $tdir); };
+ eval { Proxmox::Install::extract_data() };
my $err = $@;
- $next->set_sensitive(1);
+ $gtk_state->{next_btn}->set_sensitive(1);
+
+ set_next("_Reboot", sub { app_quit(0); } );
+
+ my $autoreboot = Proxmox::Install::Config::get_autoreboot();
+ my $autoreboot_seconds = 5;
+ my $success_transform = sub {
+ my ($raw_html, $iso_env) = @_;
+
+ my $ip_addr = Proxmox::Install::Config::get_ip_addr();
+ my $ip_version = Proxmox::Install::Config::get_ip_version();
+
+ my $addr = $ip_version == 6 ? "[${ip_addr}]" : "$ip_addr";
+ $raw_html =~ s/__IPADDR__/$addr/g;
+ $raw_html =~ s/__PORT__/$iso_env->{cfg}->{port}/g;
- set_next("_Reboot", sub { exit (0); } );
+ my $autoreboot_msg = $autoreboot ? "Automatic reboot scheduled in $autoreboot_seconds seconds." : '';
+ $raw_html =~ s/__AUTOREBOOT_MSG__/$autoreboot_msg/;
+
+ return $raw_html;
+ };
+
+ # It does not make sense to Abort the install at this point, whether it
+ # succeded or failed makes no difference.
+ $gtk_state->{abort_btn}->set_sensitive(0);
if ($err) {
- display_html("fail.htm");
- display_error($err);
+ Proxmox::UI::display_html("fail.htm");
+ # suppress "empty" error as we got some case where the user choose to abort on a prompt,
+ # there it doesn't make sense to show them an error again, they "caused" it after all.
+ Proxmox::UI::error($err) if $err ne "\n";
} else {
cleanup_view();
- display_html("success.htm");
+ Proxmox::UI::display_html("success.htm", $success_transform);
- if ($config_options->{autoreboot}) {
+ if ($autoreboot) {
Glib::Timeout->add(1000, sub {
if ($autoreboot_seconds > 0) {
$autoreboot_seconds--;
- display_html("success.htm");
+ Proxmox::UI::display_html("success.htm", $success_transform);
+ return 1; # re-schedule, undef isn't enough anymore since Bookworm
} else {
- exit(0);
+ app_quit(0);
}
});
}
sub create_intro_view {
- $prev_btn->set_sensitive(0);
+ $gtk_state->{prev_btn}->set_sensitive(0);
cleanup_view();
- if (int($total_memory) < 1024) {
- display_error("Less than 1 GiB of usable memory detected, installation will probably fail.\n\n".
- "See 'System Requirements' in the $setup->{fullname} documentation.");
+ my $run_env = Proxmox::Install::RunEnv::get();
+ if (int($run_env->{total_memory}) < 1024) {
+ Proxmox::UI::error("Less than 1 GiB of usable memory detected, installation will probably fail.\n\n".
+ "See 'System Requirements' in the $iso_env->{cfg}->{fullname} documentation.");
}
- if ($setup->{product} eq 'pve') {
- my $cpuinfo = eval { file_read_all('/proc/cpuinfo') };
- if (!$cpuinfo || $cpuinfo !~ /^flags\s*:.*(vmx|svm)/m) {
- display_error(
- "No support for hardware-accelerated KVM virtualization detected.\n\n"
- ."Check BIOS settings for Intel VT / AMD-V / SVM."
- );
- }
+ if ($iso_env->{product} eq 'pve' && !$run_env->{hvm_supported}) {
+ Proxmox::UI::error(
+ "No support for hardware-accelerated KVM virtualization detected.\n\n"
+ ."Check BIOS settings for Intel VT / AMD-V / SVM."
+ );
}
- display_html();
+ Proxmox::UI::display_html('license.htm', sub {
+ my ($raw_html, $iso_env) = @_;
+
+ my $proxmox_cddir = $iso_env->{locations}->{iso};
+ my $license = eval { decode('utf8', file_read_all("${proxmox_cddir}/EULA")) };
+ if (my $err = $@) {
+ die $err if !is_test_mode();
+ $license = "TESTMODE: Ignore non existent EULA...\n";
+ }
+ my $title = "END USER LICENSE AGREEMENT (EULA)";
+ $raw_html =~ s/__LICENSE__/$license/;
+ $raw_html =~ s/__LICENSE_TITLE__/$title/;
+
+ return $raw_html;
+ });
$step_number++;
set_next("I a_gree", \&create_hdsel_view);
}
-$ipconf = Proxmox::Sys::Net::get_ip_config();
-
-$country = detect_country() if $ipconf->{default} || is_test_mode();
+log_info("initializing GTK and creating main window...");
+Gtk3::init();
-# read country, kmap and timezone infos
-$cmap = read_cmap();
-
-if (!defined($cmap->{country}->{$country})) {
- log_warn("ignoring detected country '$country', invalid or unknown\n");
- $country = undef;
-}
-
-create_main_window ();
+create_main_window();
my $initial_error = 0;
-if (!defined ($hds) || (scalar (@$hds) <= 0)) {
- print "no harddisks found\n";
- $initial_error = 1;
- display_html("nohds.htm");
- set_next("Reboot", sub { exit(0); } );
-} else {
- foreach my $hd (@$hds) {
- my ($disk, $devname) = @$hd;
- next if $devname =~ m|^/dev/md\d+$|;
- print "found Disk$disk N:$devname\n";
+{
+ my $cached_disks = get_cached_disks();
+ if (!defined($cached_disks) || (scalar (@$cached_disks) <= 0)) {
+ print STDERR "no harddisks found\n";
+ $initial_error = 1;
+ Proxmox::UI::display_html("nohds.htm");
+ set_next("Reboot", sub { app_quit(0); } );
+ } else {
+ foreach my $hd (@$cached_disks) {
+ my ($disk, $devname) = @$hd;
+ next if $devname =~ m|^/dev/md\d+$|;
+ print STDERR "found Disk$disk N:$devname\n";
+ }
}
}
-if (!$initial_error && (scalar keys %{ $ipconf->{ifaces} } == 0)) {
- print "no network interfaces found\n";
+my $run_env = Proxmox::Install::RunEnv::get();
+if (!$initial_error && (scalar keys $run_env->{ipconf}->{ifaces}->%* == 0)) {
+ print STDERR "no network interfaces found\n";
$initial_error = 1;
- display_html("nonics.htm");
- set_next("Reboot", sub { exit(0); } );
+ Proxmox::UI::display_html("nonics.htm");
+ set_next("Reboot", sub { app_quit(0); } );
}
create_intro_view () if !$initial_error;
Gtk3->main;
-# reap left over zombie processes
-while ((my $child = waitpid(-1, POSIX::WNOHANG)) > 0) {
- print "reaped child $child\n";
-}
-
-exit 0;
+app_quit(0);