use strict;
use Getopt::Long;
+use IPC::Open2;
use IPC::Open3;
use IO::File;
-use IO::Dir;
use IO::Select;
use Cwd 'abs_path';
use Gtk3 '-init';
use Gtk3::WebKit;
use Encode;
+use String::ShellQuote;
use Data::Dumper;
+use File::Basename;
+use Time::HiRes;
-my $release = '3.0';
+my $release = '4.4';
my $kapi = `uname -r`;
chomp $kapi;
+my $enable_btrfs = 0;
+
my $opt_testmode;
if (!$ENV{G_SLICE} || $ENV{G_SLICE} ne "always-malloc") {
exit (-1);
}
+my $zfstestpool = "test_rpool";
+my $zfspoolname = $opt_testmode ? $zfstestpool : 'rpool';
+
+my $storage_cfg_zfs = <<__EOD__;
+dir: local
+ path /var/lib/vz
+ content iso,vztmpl,backup
+
+zfspool: local-zfs
+ pool $zfspoolname/data
+ sparse
+ content images,rootdir
+__EOD__
+
+my $storage_cfg_btrfs = <<__EOD__;
+dir: local
+ path /var/lib/vz
+ content iso,vztmpl,backup
+ disabled
+
+btrfs: local-btrfs
+ path /var/lib/pve/local-btrfs
+ content iso,vztmpl,backup,images,rootdir
+__EOD__
+
+my $storage_cfg_lvmthin = <<__EOD__;
+dir: local
+ path /var/lib/vz
+ content iso,vztmpl,backup
+
+lvmthin: local-lvm
+ thinpool data
+ vgname pve
+ content rootdir,images
+__EOD__
+
+
+sub file_read_firstline {
+ my ($filename) = @_;
+
+ my $fh = IO::File->new ($filename, "r");
+ return undef if !$fh;
+ my $res = <$fh>;
+ chomp $res if $res;
+ $fh->close;
+ return $res;
+}
+
my $logfd = IO::File->new (">/tmp/install.log");
my $proxmox_dir = $opt_testmode ? Cwd::cwd() : "/var/lib/pve-installer";
+my $grub_plattform = "pc"; # pc, efi-amd64 or efi-ia32
+
+$grub_plattform = "efi-amd64" if -d "/sys/firmware/efi";
+
+my $IPV4OCTET = "(?:25[0-5]|(?:2[0-4]|1[0-9]|[1-9])?[0-9])";
+my $IPV4RE = "(?:(?:$IPV4OCTET\\.){3}$IPV4OCTET)";
+my $IPV6H16 = "(?:[0-9a-fA-F]{1,4})";
+my $IPV6LS32 = "(?:(?:$IPV4RE|$IPV6H16:$IPV6H16))";
+
+my $IPV6RE = "(?:" .
+ "(?:(?:" . "(?:$IPV6H16:){6})$IPV6LS32)|" .
+ "(?:(?:" . "::(?:$IPV6H16:){5})$IPV6LS32)|" .
+ "(?:(?:(?:" . "$IPV6H16)?::(?:$IPV6H16:){4})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,1}$IPV6H16)?::(?:$IPV6H16:){3})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,2}$IPV6H16)?::(?:$IPV6H16:){2})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,3}$IPV6H16)?::(?:$IPV6H16:){1})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,4}$IPV6H16)?::" . ")$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,5}$IPV6H16)?::" . ")$IPV6H16)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,6}$IPV6H16)?::" . ")))";
+
+my $IPRE = "(?:$IPV4RE|$IPV6RE)";
+
+
+my $ipv4_mask_hash = {
+ '128.0.0.0' => 1,
+ '192.0.0.0' => 2,
+ '224.0.0.0' => 3,
+ '240.0.0.0' => 4,
+ '248.0.0.0' => 5,
+ '252.0.0.0' => 6,
+ '254.0.0.0' => 7,
+ '255.0.0.0' => 8,
+ '255.128.0.0' => 9,
+ '255.192.0.0' => 10,
+ '255.224.0.0' => 11,
+ '255.240.0.0' => 12,
+ '255.248.0.0' => 13,
+ '255.252.0.0' => 14,
+ '255.254.0.0' => 15,
+ '255.255.0.0' => 16,
+ '255.255.128.0' => 17,
+ '255.255.192.0' => 18,
+ '255.255.224.0' => 19,
+ '255.255.240.0' => 20,
+ '255.255.248.0' => 21,
+ '255.255.252.0' => 22,
+ '255.255.254.0' => 23,
+ '255.255.255.0' => 24,
+ '255.255.255.128' => 25,
+ '255.255.255.192' => 26,
+ '255.255.255.224' => 27,
+ '255.255.255.240' => 28,
+ '255.255.255.248' => 29,
+ '255.255.255.252' => 30
+};
+
+my $ipv4_reverse_mask = [
+ '0.0.0.0',
+ '128.0.0.0',
+ '192.0.0.0',
+ '224.0.0.0',
+ '240.0.0.0',
+ '248.0.0.0',
+ '252.0.0.0',
+ '254.0.0.0',
+ '255.0.0.0',
+ '255.128.0.0',
+ '255.192.0.0',
+ '255.224.0.0',
+ '255.240.0.0',
+ '255.248.0.0',
+ '255.252.0.0',
+ '255.254.0.0',
+ '255.255.0.0',
+ '255.255.128.0',
+ '255.255.192.0',
+ '255.255.224.0',
+ '255.255.240.0',
+ '255.255.248.0',
+ '255.255.252.0',
+ '255.255.254.0',
+ '255.255.255.0',
+ '255.255.255.128',
+ '255.255.255.192',
+ '255.255.255.224',
+ '255.255.255.240',
+ '255.255.255.248',
+ '255.255.255.252',
+ '255.255.255.254',
+ '255.255.255.255',
+];
my ($window, $cmdbox, $inbox, $htmlview);
-my ($next, $next_fctn, $target_hd, $master_hd);
+my ($next, $next_fctn, $target_hd);
my ($progress, $progress_status);
-my ($ipaddress, $ip_1, $ip_2, $ip_3, $ip_4);
-my ($netmask, $mask_1, $mask_2, $mask_3, $mask_4);
-my ($gateway, $gw_1, $gw_2, $gw_3, $gw_4);
-my ($dnsserver, $dns_1, $dns_2, $dns_3, $dns_4);
+my ($ipversion, $ipaddress, $ipconf_entry_addr);
+my ($netmask, $ipconf_entry_mask);
+my ($gateway, $ipconf_entry_gw);
+my ($dnsserver, $ipconf_entry_dns);
my $hostname = 'proxmox';
my $domain = 'domain.tld';
-my $cmdline = `cat /proc/cmdline` || '';
+my $cmdline = file_read_firstline("/proc/cmdline");
my $ipconf;
my $country;
my $timezone = 'Europe/Vienna';
my $keymap = 'en-us';
my $cmap;
-my $filesys = ($cmdline =~ m/\sext4(\s.*)$/) ? 'ext4' : 'ext3';
+# parse command line args
+
+my $config_options = {};
+
+if ($cmdline =~ m/\s(ext3|ext4|xfs)(\s.*)?$/) {
+ $config_options->{filesys} = $1;
+} else {
+ $config_options->{filesys} = 'ext4';
+}
+
+if ($cmdline =~ m/hdsize=(\d+(\.\d+)?)[\s\n]/i) {
+ $config_options->{hdsize} = $1;
+}
+
+if ($cmdline =~ m/swapsize=(\d+(\.\d+)?)[\s\n]/i) {
+ $config_options->{swapsize} = $1;
+}
+
+if ($cmdline =~ m/maxroot=(\d+(\.\d+)?)[\s\n]/i) {
+ $config_options->{maxroot} = $1;
+}
+
+if ($cmdline =~ m/minfree=(\d+(\.\d+)?)[\s\n]/i) {
+ $config_options->{minfree} = $1;
+}
+
+if ($cmdline =~ m/maxvz=(\d+(\.\d+)?)[\s\n]/i) {
+ $config_options->{maxvz} = $1;
+}
my $postfix_main_cf = <<_EOD;
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
_EOD
+sub shellquote {
+ my $str = shift;
+
+ return String::ShellQuote::shell_quote($str);
+}
+
+sub cmd2string {
+ my ($cmd) = @_;
+
+ die "no arguments" if !$cmd;
+
+ return $cmd if !ref($cmd);
+
+ my @qa = ();
+ foreach my $arg (@$cmd) { push @qa, shellquote($arg); }
+
+ return join (' ', @qa);
+}
+
sub syscmd {
my ($cmd) = @_;
sub run_command {
my ($cmd, $func, $input, $noout) = @_;
+ my $cmdstr;
+ if (!ref($cmd)) {
+ $cmdstr = $cmd;
+ if ($cmd =~ m/|/) {
+ # see 'man bash' for option pipefail
+ $cmd = [ '/bin/bash', '-c', "set -o pipefail && $cmd" ];
+ } else {
+ $cmd = [ $cmd ];
+ }
+ } else {
+ $cmdstr = cmd2string($cmd);
+ }
+
my $cmdtxt;
- if ($input && ($cmd !~ m/chpasswd/)) {
- $cmdtxt = "# $cmd <<EOD\n$input";
+ if ($input && ($cmdstr !~ m/chpasswd/)) {
+ $cmdtxt = "# $cmdstr <<EOD\n$input";
chomp $cmdtxt;
$cmdtxt .= "\nEOD\n";
} else {
- $cmdtxt = "# $cmd\n";
+ $cmdtxt = "# $cmdstr\n";
+ }
+
+ if ($opt_testmode) {
+ print $cmdtxt;
+ STDOUT->flush();
}
- print $cmdtxt;
- STDOUT->flush();
+
print $logfd $cmdtxt;
my $reader = IO::File->new();
my $pid;
eval {
- $pid = open3 ($writer, $reader, $error, $cmd) || die $!;
+ $pid = open3 ($writer, $reader, $error, @$cmd) || die $!;
};
my $err = $@;
while ($select->count) {
my @handles = $select->can_read (0.2);
- Gtk3->main_iteration while Gtk3->events_pending;
+ Gtk3::main_iteration() while Gtk3::events_pending();
next if !scalar (@handles); # timeout
my $ec = ($? >> 8);
if ($ec) {
- die "command '$cmd' failed with exit code $ec";
+ die "command '$cmdstr' failed with exit code $ec";
}
return $ostream;
sub detect_country {
print "trying to detect country...\n";
- open (TMP, "traceroute -N 1 -q 1 -n www.debian.org|");
+ my $cpid = open2(\*TMP, undef, "traceroute -N 1 -q 1 -n 8.8.8.8");
+ return undef if !$cpid;
my $country;
print $logfd "DC GEOIP: $geoip";
if ($geoip =~ m/GeoIP Country Edition:\s*([A-Z]+),/) {
$country = lc ($1);
+ print $logfd "DC FOUND: $country\n";
last;
}
}
sub find_stable_path {
my ($stabledir, $bdev) = @_;
- my $dh = IO::Dir->new ($stabledir);
- if ($dh) {
- while (defined(my $tmp = $dh->read)) {
- my $path = "$stabledir/$tmp";
- if (link_points_to ($path, $bdev)) {
- return wantarray ? ($path, $tmp) : $path;
- }
+ foreach my $path (<$stabledir/*>) {
+ if (link_points_to ($path, $bdev)) {
+ return wantarray ? ($path, basename($path)) : $path;
}
-
- $dh->close;
}
-
- return wantarray ? () : undef;
}
sub find_dev_by_uuid {
if ($opt_testmode) {
push @$res, [-1, $opt_testmode, int((-s $opt_testmode)/512), "TESTDISK"];
+ return $res;
}
my $count = 0;
next if $bd =~ m|^/sys/block/fd\d+$|;
next if $bd =~ m|^/sys/block/sr\d+$|;
- my $dev = `cat '$bd/dev'`;
+ my $dev = file_read_firstline("$bd/dev");
chomp $dev;
next if !$dev;
if ($name) {
my $real_name = "/dev/$name";
- my $size = `cat '$bd/size'`;
+ my $size = file_read_firstline("$bd/size");
chomp $size;
$size = undef if !($size && $size =~ m/^\d+$/);
- my $model = `cat '$bd/device/model'`;
+ my $model = file_read_firstline("$bd/device/model") || '';
$model =~ s/^\s+//;
$model =~ s/\s+$//;
if (length ($model) > 30) {
sub read_cmap {
my $countryfn = $opt_testmode ? "/usr/share/pve-manager/country.dat" :
- "/proxmox/country.dat";
+ "/cdrom/proxmox/country.dat";
open (TMP, "<$countryfn") || die "unable to open '$countryfn' - $!\n";
my $line;
my $country = {};
foreach my $hd (@$hds) {
my ($disk, $devname, $size, $model) = @$hd;
+ # size is always in 512B "sectors"! convert to KB
return int($size/2) if $devname eq $dev;
}
- die "no such device '$dev'";
-}
-
-# find the master boot disk - return the first found scsi/ide disk
-sub find_master {
- my ($target_hd) = @_;
-
- foreach my $hd (sort { ${$a}[1] cmp ${$b}[1] } @$hds) {
- my ($disk, $devname) = @$hd;
- next if $disk < 0;
-
- if ($target_hd =~ m|^/dev/sd|) {
- return $devname if $devname =~ m|^/dev/sd|;
- } elsif ($target_hd =~ m|^/dev/hd|) {
- return $devname if $devname =~ m|^/dev/hd|;
- } elsif ($target_hd =~ m|^/dev/i2o/|) {
- return $devname if $devname =~ m|^/dev/i2o/|;
- } elsif ($target_hd =~ m|^/dev/ataraid/|) {
- return $devname if $devname =~ m|^/dev/ataraid/|;
- } elsif ($target_hd =~ m|^/dev/ida/|) {
- return $devname if $devname =~ m|^/dev/ida/|;
- } elsif ($target_hd =~ m|^/dev/cciss/|) {
- return $devname if $devname =~ m|^/dev/cciss/|;
- } elsif ($target_hd =~ m|^/dev/rd/|) {
- return $devname if $devname =~ m|^/dev/rd/|;
- }
- }
-
- return $target_hd;
+ die "no such device '$dev'\n";
}
sub get_partition_dev {
- my ($target_hd, $partnum) = @_;
-
- if ($target_hd =~ m|^/dev/[hxsev]d[a-z]$|) {
- return "${target_hd}$partnum";
- } elsif ($target_hd =~ m|^/dev/[^/]+/c\d+d\d+$|) {
- return "${target_hd}p$partnum";
- } elsif ($target_hd =~ m|^/dev/[^/]+/d\d+$|) {
- return "${target_hd}p$partnum";
- } elsif ($target_hd =~ m|^/dev/[^/]+/hd[a-z]$|) {
- return "${target_hd}$partnum";
+ my ($dev, $partnum) = @_;
+
+ if ($dev =~ m|^/dev/[hxsev]d[a-z]$|) {
+ return "${dev}$partnum";
+ } elsif ($dev =~ m|^/dev/[^/]+/c\d+d\d+$|) {
+ return "${dev}p$partnum";
+ } elsif ($dev =~ m|^/dev/[^/]+/d\d+$|) {
+ return "${dev}p$partnum";
+ } elsif ($dev =~ m|^/dev/[^/]+/hd[a-z]$|) {
+ return "${dev}$partnum";
+ } elsif ($dev =~ m|^/dev/nvme\d+n\d+$|) {
+ return "${dev}p$partnum";
} else {
- die "unable to get device for partition $partnum on device $target_hd\n";
+ die "unable to get device for partition $partnum on device $dev\n";
}
}
-sub get_boot_part {
- my ($target_hd, $gpt) = @_;
+sub file_get_contents {
+ my ($filename, $max) = @_;
- return get_partition_dev ($target_hd, $gpt ? 2 : 1);
-}
+ my $fh = IO::File->new($filename, "r") ||
+ die "can't open '$filename' - $!\n";
-sub get_lvm_part {
- my ($target_hd, $gpt) = @_;
+ local $/; # slurp mode
- return get_partition_dev ($target_hd, $gpt ? 3 : 2);
+ my $content = <$fh>;
+
+ close $fh;
+
+ return $content;
}
sub write_config {
my ($text, $filename) = @_;
my $fd = IO::File->new (">$filename") ||
- die "unable to open file '$filename' - $!";
+ die "unable to open file '$filename' - $!\n";
print $fd $text;
$fd->close();
}
$progress->set_text (sprintf ("%d%%", int ($res*100)));
$progress_status->set_text ($text) if defined ($text);
- Gtk3->main_iteration while Gtk3->events_pending;
+ Gtk3::main_iteration() while Gtk3::events_pending();
}
-sub create_filesystem {
- my ($dev, $name, $type, $start, $end, $fs, $fe, $opts) = @_;
+my $fssetup = {
+ ext3 => {
+ mkfs => 'mkfs.ext3 -F',
+ mkfs_root_opt => '',
+ mkfs_data_opt => '-m 0',
+ root_mountopt => 'errors=remount-ro',
+ },
+ ext4 => {
+ mkfs => 'mkfs.ext4 -F',
+ mkfs_root_opt => '',
+ mkfs_data_opt => '-m 0',
+ root_mountopt => 'errors=remount-ro',
+ },
+ xfs => {
+ mkfs => 'mkfs.xfs -f',
+ mkfs_root_opt => '',
+ mkfs_data_opt => '',
+ root_mountopt => '',
+ },
+};
- $opts = '' if !$opts;
+sub create_filesystem {
+ my ($dev, $name, $type, $start, $end, $fs, $fe) = @_;
my $range = $end - $start;
my $rs = $start + $range*$fs;
my $re = $start + $range*$fe;
my $max = 0;
+ my $fsdata = $fssetup->{$type} || die "internal error - unknown file system '$type'";
+ my $opts = $name eq 'root' ? $fsdata->{mkfs_root_opt} : $fsdata->{mkfs_data_opt};
+
update_progress (0, $rs, $re, "creating $name filesystem");
- run_command ("mkfs.$type $opts -F $dev", sub {
+ run_command ("$fsdata->{mkfs} $opts $dev", sub {
my $line = shift;
if ($line =~ m/Writing inode tables:\s+(\d+)\/(\d+)/) {
die "unable to remove $cmd diversion\n";
}
+sub btrfs_create {
+ my ($partitions, $mode) = @_;
+
+ die "unknown btrfs mode '$mode'"
+ if !($mode eq 'single' || $mode eq 'raid0' ||
+ $mode eq 'raid1' || $mode eq 'raid10');
+
+ my $cmd = ['mkfs.btrfs', '-f'];
+
+ push @$cmd, '-d', $mode, '-m', $mode;
+
+ push @$cmd, @$partitions;
+
+ syscmd($cmd);
+}
+
+sub zfs_create_rpool {
+ my ($vdev) = @_;
+
+ my $cmd = "zpool create -f -o cachefile=none";
+
+ $cmd .= " -o ashift=$config_options->{ashift}"
+ if defined($config_options->{ashift});
+
+ syscmd ("$cmd $zfspoolname $vdev") == 0 ||
+ die "unable to create zfs root pool\n";
+
+ syscmd ("zfs create $zfspoolname/ROOT") == 0 ||
+ die "unable to create zfs $zfspoolname/ROOT volume\n";
+
+ syscmd ("zfs create $zfspoolname/data") == 0 ||
+ die "unable to create zfs $zfspoolname/data volume\n";
+
+ syscmd ("zfs create $zfspoolname/ROOT/pve-1") == 0 ||
+ die "unable to create zfs $zfspoolname/ROOT/pve-1 volume\n";
+
+ # disable atime during insatll
+ syscmd ("zfs set atime=off $zfspoolname") == 0 ||
+ die "unable to set zfs properties\n";
+
+ my $value = $config_options->{compress};
+ syscmd ("zfs set compression=$value $zfspoolname")
+ if defined($value) && $value ne 'off';
+
+ $value = $config_options->{checksum};
+ syscmd ("zfs set checksum=$value $zfspoolname")
+ if defined($value) && $value ne 'on';
+
+ $value = $config_options->{copies};
+ syscmd ("zfs set copies=$value $zfspoolname")
+ if defined($value) && $value != 1;
+}
+
+sub zfs_create_swap {
+ my ($swapsize) = @_;
+
+ my $cmd = "zfs create -V ${swapsize}K -b 4K";
+
+ $cmd .= " -o com.sun:auto-snapshot=false";
+
+ # copies for swap does not make sense
+ $cmd .= " -o copies=1";
+
+ # reduces memory pressure
+ $cmd .= " -o sync=always";
+
+ # cheapest compression to drop zero pages
+ $cmd .= " -o compression=zle";
+
+ # skip log devices
+ $cmd .= " -o logbias=throughput";
+ # only cache metadata in RAM (caching swap content does not make sense)
+ $cmd .= " -o primarycache=metadata";
+ # don't cache anything in L2ARC
+ $cmd .= " -o secondarycache=none";
+
+ $cmd .= " $zfspoolname/swap";
+ syscmd ($cmd) == 0 ||
+ die "unable to create zfs swap device\n";
+
+ return "/dev/zvol/$zfspoolname/swap";
+}
+
+sub partition_bootable_disk {
+ my ($target_dev, $maxhdsize, $ptype) = @_;
+
+ die "too dangerous" if $opt_testmode;
+
+ die "unknown partition type '$ptype'"
+ if !($ptype eq '8E00' || $ptype eq '8300');
+
+ syscmd("sgdisk -Z ${target_dev}");
+ my $hdsize = hd_size($target_dev); # size in KB (1024 bytes)
+
+ my $restricted_hdsize_mb = 0; # 0 ==> end of partition
+ if ($maxhdsize && ($maxhdsize < $hdsize)) {
+ $hdsize = $maxhdsize;
+ $restricted_hdsize_mb = int($hdsize/1024) . 'M';
+ }
+
+ my $hdgb = int($hdsize/(1024*1024));
+ die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
+
+ # 1 - BIOS boot partition (Grub Stage2): first free 1M
+ # 2 - EFI ESP: next free 256M
+ # 3 - OS/Data partition: rest, up to $maxhdsize in MB
+
+ my $grubbootdev = get_partition_dev($target_dev, 1);
+ my $efibootdev = get_partition_dev($target_dev, 2);
+ my $osdev = get_partition_dev ($target_dev, 3);
+
+ my $pcmd = ['sgdisk'];
+
+ my $pnum = 1;
+ push @$pcmd, "-n${pnum}:1M:+1M", "-t$pnum:EF02";
+
+ $pnum = 2;
+ push @$pcmd, "-n${pnum}:2M:+256M", "-t$pnum:EF00";
+
+ $pnum = 3;
+ push @$pcmd, "-n${pnum}:258M:${restricted_hdsize_mb}", "-t$pnum:$ptype";
+
+ push @$pcmd, $target_dev;
+
+ my $os_size = $hdsize - 258*1024; # 256M + 1M + 1M alignment
+
+ syscmd($pcmd) == 0 ||
+ die "unable to partition harddisk '${target_dev}'\n";
+
+ return ($os_size, $osdev, $efibootdev);
+}
+
+# ZFS has this use_whole_disk concept, so we try to partition the same
+# way as zfs does by default. There is room at start of disk to insert
+# a grub boot partition. But adding a EFI ESP is not possible.
+#
+# Note: zfs people think this is just a waste of space an not
+# required. Instead, you should put the ESP on another disk (log,
+# ..).
+
+sub partition_bootable_zfs_disk {
+ my ($target_dev) = @_;
+
+ die "too dangerous" if $opt_testmode;
+
+ syscmd("sgdisk -Z ${target_dev}");
+ my $hdsize = hd_size($target_dev); # size in blocks (1024 bytes)
+
+ my $hdgb = int($hdsize/(1024*1024));
+ die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
+
+ # 1 - GRUB boot partition: 1M
+ # 2 - OS/Data partition
+ # 9 - ZFS reserved partition
+
+ my $grubbootdev = get_partition_dev($target_dev, 1);
+ my $osdev = get_partition_dev ($target_dev, 2);
+
+ my $pcmd = ['sgdisk', '-a1'];
+
+ my $pnum = 1;
+ push @$pcmd, "-n$pnum:34:2047", "-t$pnum:EF02";
+
+ $pnum = 9;
+ push @$pcmd, "-n$pnum:-8M:0", "-t$pnum:BF07";
+
+ $pnum = 2;
+ push @$pcmd, "-n$pnum:2048:0", "-t$pnum:BF01", '-c', "$pnum:zfs";
+
+ push @$pcmd, $target_dev;
+
+ my $os_size = $hdsize - 1024 - 1024*8;
+
+ syscmd($pcmd) == 0 ||
+ die "unable to partition harddisk '${target_dev}'\n";
+
+ return ($os_size, $osdev);
+}
+
+sub create_lvm_volumes {
+ my ($lvmdev, $os_size, $swap_size) = @_;
+
+ my $rootdev = '/dev/pve/root';
+ my $datadev = '/dev/pve/data';
+ my $swapfile = '/dev/pve/swap';
+
+ # we use --metadatasize 250k, which reseults in "pe_start = 512"
+ # so pe_start is aligned on a 128k boundary (advantage for SSDs)
+ syscmd ("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
+ die "unable to initialize physical volume $lvmdev\n";
+ syscmd ("/sbin/vgcreate pve $lvmdev") == 0 ||
+ die "unable to create volume group 'pve'\n";
+
+ my $hdgb = int($os_size/(1024*1024));
+ my $space = (($hdgb > 128) ? 16 : ($hdgb/8))*1024*1024;
+
+ my $maxroot;
+ if ($config_options->{maxroot}) {
+ $maxroot = $config_options->{maxroot};
+ } else {
+ $maxroot = 96;
+ }
+
+ my $rootsize = (($hdgb > ($maxroot*4)) ? $maxroot : $hdgb/4)*1024*1024;
+
+ my $rest = $os_size - $swap_size - $rootsize; # in KB
+
+ my $minfree;
+ if ($config_options->{minfree}) {
+ $minfree = (($config_options->{minfree}*1024*1024) >= $rest ) ? $space :
+ $config_options->{minfree}*1024*1024 ;
+ } else {
+ $minfree = $space;
+ }
+
+ $rest = $rest - $minfree;
+
+ if ($config_options->{maxvz}) {
+ $rest = (($config_options->{maxvz}*1024*1024) <= $rest) ?
+ $config_options->{maxvz}*1024*1024 : $rest;
+ }
+
+ syscmd ("/sbin/lvcreate -L${swap_size}K -nswap pve") == 0 ||
+ die "unable to create swap volume\n";
+
+ syscmd ("/sbin/lvcreate -L${rootsize}K -nroot pve") == 0 ||
+ die "unable to create root volume\n";
+
+ syscmd ("/sbin/lvcreate -L${rest}K -ndata pve") == 0 ||
+ die "unable to create data volume\n";
+
+ syscmd ("/sbin/lvconvert --yes --type thin-pool pve/data") == 0 ||
+ die "unable to create data thin-pool\n";
+
+ syscmd ("/sbin/vgchange -a y pve") == 0 ||
+ die "unable to activate volume group\n";
+
+ return ($rootdev, $datadev, $swapfile);
+}
+
+sub compute_swapsize {
+ my ($hdsize) = @_;
+
+ my $hdgb = int($hdsize/(1024*1024));
+
+ my $swapsize;
+ if ($config_options->{swapsize}) {
+ $swapsize = $config_options->{swapsize}*1024*1024;
+ } else {
+ my $ss = int ($total_memory / 1024);
+ $ss = 4 if $ss < 4;
+ $ss = ($hdgb/8) if $ss > ($hdgb/8);
+ $ss = 8 if $ss > 8;
+ $swapsize = $ss*1024*1024;
+ }
+
+ return $swapsize;
+}
+
+my $udevadm_trigger_block = sub {
+ my ($nowait) = @_;
+
+ sleep(1) if !$nowait; # give kernel time to reread part table
+
+ # trigger udev to create /dev/disk/by-uuid
+ syscmd ("udevadm trigger --subsystem-match block");
+ syscmd ("udevadm settle --timeout 10");
+};
+
sub extract_data {
- my ($tgzfile, $targetdir) = @_;
+ my ($basefile, $targetdir) = @_;
die "target '$targetdir' does not exist\n" if ! -d $targetdir;
- my $rootdev;
- my $bootdev;
+ my $starttime = [Time::HiRes::gettimeofday];
+
+ my $bootdevinfo = [];
+
my $datadev;
my $swapfile;
+ my $rootdev;
- my $ptype = 'msdos';
+ my $use_zfs = 0;
+ my $use_btrfs = 0;
+
+ my $filesys = $config_options->{filesys};
+
+ if ($filesys =~ m/zfs/) {
+ $target_hd = undef; # do not use this config
+ $use_zfs = 1;
+ $targetdir = "/$zfspoolname/ROOT/pve-1";
+ } elsif ($filesys =~ m/btrfs/) {
+ $target_hd = undef; # do not use this config
+ $use_btrfs = 1;
+ }
+
+ if ($use_zfs) {
+ my $i;
+ for ($i = 5; $i > 0; $i--) {
+ syscmd("modprobe zfs");
+ last if -c "/dev/zfs";
+ sleep(1);
+ }
+
+ die "unable to load zfs kernel module\n" if !$i;
+ }
eval {
+
my $maxper = 0.25;
update_progress (0, 0, $maxper, "create partitions");
- if ( -b $target_hd) {
- syscmd ("dd if=/dev/zero of=${target_hd} bs=512 count=256");
- my $hdsize = hd_size ($target_hd); # size in blocks (1024 bytes)
-
- if ($hdsize >= 2*1024*1024*1024) { # MBR can only handle 2 TB
- $ptype = 'gpt';
- }
-
- if ($cmdline =~ m/hdsize=(\d+)[\s\n]/i) {
- # max hdsize passed on cmdline (GB)
- my $maxhdsize=$1*1024*1024;
+ if ($opt_testmode) {
- # use $maxhdsize if specified size is lower than hdsize
- if ($maxhdsize < $hdsize) {
- $hdsize = $maxhdsize;
- }
- }
+ $rootdev = abs_path($opt_testmode);
+ syscmd("umount $rootdev");
- my $bootsize_mb = 512;
- my $bootsize = $bootsize_mb * 1024;
- my $hdsize_mb = $hdsize/1024;
+ if ($use_btrfs) {
- my $pcmd = "parted --align optimal ${target_hd}";
- $pcmd .= " unit MiB";
- $pcmd .= " mklabel $ptype";
+ die "unsupported btrfs mode (for testing environment)\n"
+ if $filesys ne 'btrfs (RAID0)';
- my $pnum = 1;
+ btrfs_create([$rootdev], 'single');
- if ($ptype eq 'gpt') {
- $pcmd .= " mkpart primary 1 2";
- $pcmd .= " set $pnum bios_grub on";
- $pnum++;
- };
+ } elsif ($use_zfs) {
- $pcmd .= " mkpart primary ext2 $pnum ${bootsize_mb}";
- $pcmd .= " set $pnum boot on";
- $pnum++;
+ die "unsupported zfs mode (for testing environment)\n"
+ if $filesys ne 'zfs (RAID0)';
+ syscmd ("zpool destroy $zfstestpool");
- $pcmd .= " mkpart primary ext2 ${bootsize_mb} ${hdsize_mb}";
- $pcmd .= " set $pnum lvm on";
+ zfs_create_rpool($rootdev);
+
+ } else {
- syscmd($pcmd) == 0 ||
- die "unable to partition harddisk '${target_hd}'\n";
+ # nothing to do
+ }
- sleep(1); # give kernel time to reread part table
+ } elsif ($use_btrfs) {
+
+ my ($devlist, $btrfs_mode) = get_btrfs_raid_setup();
+ my $btrfs_partitions = [];
+ my $disksize;
+ foreach my $hd (@$devlist) {
+ my $devname = @$hd[1];
+ my ($size, $osdev, $efidev) =
+ partition_bootable_disk($devname, undef, '8300');
+ $rootdev = $osdev if !defined($rootdev); # simply point to first disk
+ my $by_id = find_stable_path("/dev/disk/by-id", $devname);
+ push @$bootdevinfo, { esp => $efidev, devname => $devname,
+ osdev => $osdev, by_id => $by_id };
+ push @$btrfs_partitions, $osdev;
+ $disksize = $size;
+ }
- my $lvmdev = get_lvm_part($target_hd, $ptype eq 'gpt');
+ &$udevadm_trigger_block();
- $rootdev = '/dev/pve/root';
- $datadev = '/dev/pve/data';
- $swapfile = '/dev/pve/swap';
+ btrfs_create($btrfs_partitions, $btrfs_mode);
- # we use --metadatasize 250k, which reseults in "pe_start = 512"
- # so pe_start is aligned on a 128k boundary (advantage for SSDs)
- syscmd ("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
- die "unable to initialize physical volume $lvmdev";
- syscmd ("/sbin/vgcreate pve $lvmdev") == 0 ||
- die "unable to create volume group";
+ } elsif ($use_zfs) {
- my $hdgb = int($hdsize/(1024*1024));
- die "hardisk too small (${hdgb}GB)" if $hdgb < 4;
+ my ($devlist, $bootdevlist, $vdev) = get_zfs_raid_setup();
- my $swapsize;
- if ($cmdline =~ m/swapsize=(\d+)[\s\n]/i) {
- $swapsize=$1*1024*1024;
- } else {
- my $ss = int ($total_memory / 1024);
- $ss = 4 if $ss < 4;
- $ss = ($hdgb/8) if $ss > ($hdgb/8);
- $swapsize = $ss*1024*1024;
+ my $disksize;
+ foreach my $hd (@$bootdevlist) {
+ my $devname = @$hd[1];
+ my ($size, $osdev) =
+ partition_bootable_zfs_disk($devname);
+ zfs_mirror_size_check($disksize, $size) if $disksize;
+ push @$bootdevinfo, { devname => $devname, osdev => $osdev};
+ $disksize = $size;
}
- my $space = (($hdgb > 128) ? 16 : ($hdgb/8))*1024*1024;
+ &$udevadm_trigger_block();
- my $maxroot;
- if ($cmdline =~ m/maxroot=(\d+)[\s\n]/i) {
- $maxroot = $1;
- } else {
- $maxroot = 96;
+ foreach my $di (@$bootdevinfo) {
+ my $devname = $di->{devname};
+ $di->{by_id} = find_stable_path ("/dev/disk/by-id", $devname);
+
+ # Note: using /dev/disk/by-id/ does not work for unknown reason, we get
+ # cannot create 'rpool': no such pool or dataset
+ #my $osdev = find_stable_path ("/dev/disk/by-id", $di->{osdev}) || $di->{osdev};
+
+ my $osdev = $di->{osdev};
+ $vdev =~ s/ $devname/ $osdev/;
}
- my $rootsize = (($hdgb > ($maxroot*4)) ? $maxroot : $hdgb/4)*1024*1024;
- my $rest = int($hdsize) - $bootsize - $swapsize - $rootsize; # in KB
+ zfs_create_rpool($vdev);
+
+ my $swap_size = compute_swapsize($disksize);
+ $swapfile = zfs_create_swap($swap_size);
- my $minfree;
- if ($cmdline =~ m/minfree=(\d+)[\s\n]/i) {
- $minfree = (($1*1024*1024) >= $rest ) ? $space : $1*1024*1024 ;
- } else {
- $minfree = $space;
- }
+ } else {
- $rest = $rest - $minfree;
+ die "target '$target_hd' is not a valid block device\n" if ! -b $target_hd;
- if ($cmdline =~ m/maxvz=(\d+)[\s\n]/i) {
- $rest = (($1*1024*1024) <= $rest) ? $1*1024*1024 : $rest;
+ my $maxhdsize;
+ if ($config_options->{hdsize}) {
+ # max hdsize passed on cmdline (GB)
+ $maxhdsize = $config_options->{hdsize}*1024*1024;
}
- syscmd ("/sbin/lvcreate -L${swapsize}K -nswap pve") == 0 ||
- die "unable to create swap volume";
+ my ($os_size, $osdev, $efidev);
+ ($os_size, $osdev, $efidev) =
+ partition_bootable_disk($target_hd, $maxhdsize, '8E00');
- syscmd ("/sbin/lvcreate -L${rootsize}K -nroot pve") == 0 ||
- die "unable to create root volume";
+ &$udevadm_trigger_block();
- syscmd ("/sbin/lvcreate -L${rest}K -ndata pve") == 0 ||
- die "unable to create data volume";
+ my $by_id = find_stable_path ("/dev/disk/by-id", $target_hd);
+ push @$bootdevinfo, { esp => $efidev, devname => $target_hd,
+ osdev => $osdev, by_id => $by_id };
- syscmd ("/sbin/vgchange -a y pve") == 0 ||
- die "unable to activate volume group";
+ my $swap_size = compute_swapsize($os_size);
+ ($rootdev, $datadev, $swapfile) =
+ create_lvm_volumes($osdev, $os_size, $swap_size);
- } else {
- $rootdev = $target_hd;
- syscmd ("umount $rootdev");
+ # trigger udev to create /dev/disk/by-uuid
+ &$udevadm_trigger_block(1);
+ }
+
+ if ($use_zfs) {
+ # to be fast during installation
+ syscmd ("zfs set sync=disabled $zfspoolname") == 0 ||
+ die "unable to set zfs properties\n";
}
update_progress (0.03, 0, $maxper, "create swap space");
if ($swapfile) {
- syscmd ("mkswap $swapfile") == 0 ||
+ syscmd ("mkswap -f $swapfile") == 0 ||
die "unable to create swap space\n";
}
update_progress (0.05, 0, $maxper, "creating filesystems");
- if ( -b $target_hd) {
- $bootdev = get_boot_part ($target_hd, $ptype eq 'gpt');
- create_filesystem ($bootdev, 'boot', $filesys, 0.05, $maxper, 0, 0.1);
- create_filesystem ($rootdev, 'root', $filesys, 0.05, $maxper, 0.1, 0.5);
- create_filesystem ($datadev, 'data', $filesys, 0.05, $maxper, 0.5, 1, '-m 0');
+ foreach my $di (@$bootdevinfo) {
+ next if !$di->{esp};
+ syscmd ("mkfs.vfat -F32 $di->{esp}") == 0 ||
+ die "unable to initialize EFI ESP on device $di->{esp}\n";
+ }
+
+ if ($use_zfs) {
+ # do nothing
+ } elsif ($use_btrfs) {
+ # do nothing
} else {
create_filesystem ($rootdev, 'root', $filesys, 0.05, $maxper, 0, 1);
}
update_progress (1, 0.05, $maxper, "mounting target $rootdev");
- if ( -b $target_hd) {
-
- # trigger udev to create /dev/disk/by-uuid
- syscmd ("udevadm trigger --subsystem-match block");
- syscmd ("udevadm settle --timeout 10");
-
+ if ($use_zfs) {
+ # do nothing
+ } elsif ($use_btrfs) {
+ syscmd("mount -n $rootdev -o noatime,nobarrier $targetdir") == 0 ||
+ die "unable to mount $rootdev\n";
+ } else {
syscmd ("mount -n $rootdev -o noatime,barrier=0 $targetdir") == 0 ||
die "unable to mount $rootdev\n";
+ }
- mkdir "$targetdir/boot";
- syscmd ("mount -n $bootdev -o noatime,barrier=0 $targetdir/boot") == 0 ||
- die "unable to mount $bootdev\n";
+ mkdir "$targetdir/boot";
+ mkdir "$targetdir/boot/efi";
- mkdir "$targetdir/var";
- mkdir "$targetdir/var/lib";
- mkdir "$targetdir/var/lib/vz";
- syscmd ("mount -n $datadev $targetdir/var/lib/vz") == 0 ||
- die "unable to mount $datadev\n";
+ mkdir "$targetdir/var";
+ mkdir "$targetdir/var/lib";
+ mkdir "$targetdir/var/lib/vz";
+ mkdir "$targetdir/var/lib/pve";
- } else {
- syscmd ("mount $rootdev $targetdir -o loop,noatime,barrier=0") == 0 ||
- die "unable to mount $rootdev\n";
+ if ($use_btrfs) {
+ syscmd("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
+ die "unable to create btrfs subvolume\n";
}
display_html ("extract2-rulesystem.htm");
update_progress (1, 0.05, $maxper, "extracting base system");
- my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($tgzfile);
- $ino || die "unable to open file '$tgzfile' - $!\n";
+ my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($basefile);
+ $ino || die "unable to open file '$basefile' - $!\n";
my $files;
if ($opt_testmode) {
- $files = `cat /pve/$release/install/pve-base.cnt`;
+ $files = file_read_firstline("/pve/$release/install/pve-base.cnt");
} else {
- $files = `cat /proxmox/pve-base.cnt`;
+ $files = file_read_firstline("/cdrom/proxmox/pve-base.cnt");
}
my $per = 0;
my $count = 0;
- run_command ("tar xvf $tgzfile -C $targetdir", sub {
+ run_command ("unsquashfs -f -dest $targetdir -i $basefile", sub {
my $line = shift;
+ return if $line !~ m/^$targetdir/;
$count++;
my $nper = int (($count *100)/$files);
if ($nper != $per) {
$per = $nper;
- my $frac = $per > 100 ? 100 : $per/100;
+ my $frac = $per > 100 ? 1 : $per/100;
update_progress ($frac, $maxper, 0.5);
}
});
# configure interfaces
- my $ifaces =
- "auto lo\niface lo inet loopback\n\n" .
- "auto vmbr0\niface vmbr0 inet static\n" .
- "\taddress $ipaddress\n" .
- "\tnetmask $netmask\n" .
- "\tgateway $gateway\n" .
- "\tbridge_ports eth0\n" .
- "\tbridge_stp off\n" .
- "\tbridge_fd 0\n";
+ my $ifaces = "auto lo\niface lo inet loopback\n\n";
- write_config ($ifaces, "$targetdir/etc/network/interfaces");
+ my $ntype = $ipversion == 4 ? 'inet' : 'inet6';
- # configure dns
+ my $bridge_port = $ipconf->{ifaces}->{$ipconf->{selected}}->{name};
+
+ $ifaces .= "iface $bridge_port $ntype manual\n";
- my $resolfconf = "search $domain\nnameserver $dnsserver\n";
- write_config ($resolfconf, "$targetdir/etc/resolv.conf");
+ $ifaces .=
+ "\nauto vmbr0\niface vmbr0 $ntype static\n" .
+ "\taddress $ipaddress\n" .
+ "\tnetmask $netmask\n" .
+ "\tgateway $gateway\n" .
+ "\tbridge_ports $bridge_port\n" .
+ "\tbridge_stp off\n" .
+ "\tbridge_fd 0\n";
- # try to use UUID=XXX for boot device
- my $boot_uuid = $bootdev;
- if (my $uuid = find_dev_by_uuid ($bootdev)) {
- $boot_uuid = "UUID=$uuid";
+ foreach my $iface (sort keys %{$ipconf->{ifaces}}) {
+ my $name = $ipconf->{ifaces}->{$iface}->{name};
+ next if $name eq $bridge_port;
+
+ $ifaces .= "\niface $name $ntype manual\n";
}
+ write_config ($ifaces, "$targetdir/etc/network/interfaces");
+
+ # configure dns
+
+ my $resolvconf = "search $domain\nnameserver $dnsserver\n";
+ write_config ($resolvconf, "$targetdir/etc/resolv.conf");
+
# configure fstab
- my $fstab =
- "# <file system> <mount point> <type> <options> <dump> <pass>\n" .
- "$rootdev / $filesys errors=remount-ro 0 1\n";
+ my $fstab = "# <file system> <mount point> <type> <options> <dump> <pass>\n";
+
+ if ($use_zfs) {
+ # do nothing
+ } elsif ($use_btrfs) {
+ my $fsuuid;
+ my $cmd = "blkid -u filesystem -t TYPE=btrfs -o export $rootdev";
+ run_command($cmd, sub {
+ my $line = shift;
+
+ if ($line =~ m/^UUID=([A-Fa-f0-9\-]+)$/) {
+ $fsuuid = $1;
+ }
+ });
+
+ die "unable to detect FS UUID" if !defined($fsuuid);
- $fstab .= "$datadev /var/lib/vz $filesys defaults 0 1\n" if $datadev;
+ $fstab .= "UUID=$fsuuid / btrfs defaults 0 1\n";
+ } else {
+ my $root_mountopt = $fssetup->{$filesys}->{root_mountopt} || 'defaults';
+ $fstab .= "$rootdev / $filesys ${root_mountopt} 0 1\n";
+ }
+
+ # mount /boot/efi
+ # Note: this is required by current grub, but really dangerous, because
+ # vfat does not have journaling, so it triggers manual fsck after each crash
+ # so we only mount /boot/efi if really required (efi systems).
+ if ($grub_plattform =~ m/^efi-/) {
+ if (scalar(@$bootdevinfo)) {
+ my $di = @$bootdevinfo[0]; # simply use first disk
+ if ($di->{esp}) {
+ my $efi_boot_uuid = $di->{esp};
+ if (my $uuid = find_dev_by_uuid ($di->{esp})) {
+ $efi_boot_uuid = "UUID=$uuid";
+ }
+
+ $fstab .= "${efi_boot_uuid} /boot/efi vfat defaults 0 1\n";
+ }
+ }
+ }
- $fstab .= "${boot_uuid} /boot $filesys defaults 0 1\n" if $boot_uuid;
$fstab .= "$swapfile none swap sw 0 0\n" if $swapfile;
syscmd ("touch $targetdir/proxmox_install_mode");
+ my $grub_install_devices_txt = '';
+ foreach my $di (@$bootdevinfo) {
+ $grub_install_devices_txt .= ', ' if $grub_install_devices_txt;
+ $grub_install_devices_txt .= $di->{by_id} || $di->{devname};
+ }
+
+ # Note: debian-installer/locale is used by console-setup
+
debconfig_set ($targetdir, <<_EOD);
locales locales/default_environment_locale select en_US.UTF-8
locales locales/locales_to_be_generated select en_US.UTF-8 UTF-8
samba-common samba-common/dhcp boolean false
samba-common samba-common/workgroup string WORKGROUP
postfix postfix/main_mailer_type select Local only
-console-data console-data/keymap/policy select Don\'t touch keymap
+keyboard-configuration keyboard-configuration/xkb-keymap select $keymap
+d-i debian-installer/locale select en_US.UTF-8
+grub-pc grub-pc/install_devices select $grub_install_devices_txt
_EOD
- my $pkgdir = $opt_testmode ? "packages" : "/proxmox/packages";
+ my $pkgdir = $opt_testmode ? "packages" : "/cdrom/proxmox/packages";
my $pkg_count = 0;
while (<$pkgdir/*.deb>) { $pkg_count++ };
+ # btrfs/dpkg is extremely slow without --force-unsafe-io
+ my $dpkg_opts = $use_btrfs ? "--force-unsafe-io" : "";
+
$count = 0;
while (<$pkgdir/*.deb>) {
chomp;
my $path = $_;
my ($deb) = $path =~ m/$pkgdir\/(.*\.deb)/;
+# if ($deb =~ m/^grub-efi-/ && $deb !~ m/^grub-${grub_plattform}/) {
+# $count++;
+# next;
+# }
update_progress ($count/$pkg_count, 0.5, 0.75, "extracting $deb");
print "extracting: $deb\n";
syscmd ("cp $path $targetdir/tmp/$deb") == 0 ||
die "installation of package $deb failed\n";
- syscmd ("chroot $targetdir dpkg --force-depends --no-triggers --unpack /tmp/$deb") == 0 ||
+ syscmd ("chroot $targetdir dpkg $dpkg_opts --force-depends --no-triggers --unpack /tmp/$deb") == 0 ||
die "installation of package $deb failed\n";
update_progress ((++$count)/$pkg_count, 0.5, 0.75);
}
display_html ("extract4-virus.htm");
- my $cmd = "chroot $targetdir dpkg --force-confold --configure -a";
+ my $cmd = "chroot $targetdir dpkg $dpkg_opts --force-confold --configure -a";
$count = 0;
run_command ($cmd, sub {
my $line = shift;
# cleanup mail queue
syscmd ("chroot $targetdir /usr/sbin/postsuper -d ALL");
- unlink "$targetdir/proxmox_install_mode";
+ # enable NTP (timedatectl set-ntp true does not work without DBUS)
+ syscmd ("chroot $targetdir /bin/systemctl enable systemd-timesyncd.service");
- # disable bacula-fd
- syscmd ("touch '$targetdir/etc/bacula/do_not_run'");
+ unlink "$targetdir/proxmox_install_mode";
# set timezone
unlink ("$targetdir/etc/localtime");
symlink ("/usr/share/zoneinfo/$timezone", "$targetdir/etc/localtime");
write_config ("$timezone\n", "$targetdir/etc/timezone");
- # set console keymap
- if (my $kmapfile = $cmap->{kmap}->{$keymap}->{console}) {
- syscmd ("chroot $targetdir /usr/sbin/install-keymap '/usr/share/keymaps/i386/$kmapfile'");
- }
-
- # enable apache port redirect
- syscmd ("chroot $targetdir a2ensite pve-redirect.conf");
-
# set apt mirror
if (my $mirror = $cmap->{country}->{$country}->{mirror}) {
my $fn = "$targetdir/etc/apt/sources.list";
# file does not exist)
write_config ('', "$targetdir/var/lib/apt/extended_states");
+ # allow ssh root login
+ syscmd ("sed -i 's/^PermitRootLogin.*/PermitRootLogin yes/' '$targetdir/etc/ssh/sshd_config'");
+
# save installer settings
my $ucc = uc ($country);
debconfig_set ($targetdir, <<_EOD);
update_progress (0.8, 0.95, 1, "make system bootable");
- # update default grub settings
- syscmd ("sed -i -e 's/^GRUB_DISTRIBUTOR.*/GRUB_DISTRIBUTOR=\"Proxmox Virtual Environment\"/' -e 's/#GRUB_DISABLE_LINUX_RECOVERY=.*/GRUB_DISABLE_LINUX_RECOVERY=\"true\"/' $targetdir/etc/default/grub");
+ if ($use_zfs) {
+ syscmd ("sed -i -e 's/^GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"root=ZFS=$zfspoolname\\/ROOT\\/pve-1 boot=zfs\"/' $targetdir/etc/default/grub") == 0 ||
+ die "unable to update /etc/default/grub\n";
+
+ }
diversion_remove ($targetdir, "/usr/sbin/update-grub");
diversion_remove ($targetdir, "/usr/sbin/update-initramfs");
- if (!$opt_testmode && -b $target_hd) {
+ if (!$opt_testmode) {
unlink ("$targetdir/etc/mtab");
symlink ("/proc/mounts", "$targetdir/etc/mtab");
syscmd ("chroot $targetdir /usr/sbin/update-initramfs -c -k $kapi") == 0 ||
die "unable to install initramfs\n";
- syscmd ("chroot $targetdir /usr/sbin/grub-install --no-floppy '(hd0)'") == 0 ||
- die "unable to install the boot loader\n";
+ foreach my $di (@$bootdevinfo) {
+ my $dev = $di->{devname};
+ syscmd ("chroot $targetdir /usr/sbin/grub-install --target i386-pc --no-floppy --bootloader-id='proxmox' $dev") == 0 ||
+ die "unable to install the i386-pc boot loader on '$dev'\n";
+
+ if ($di->{esp}) {
+ syscmd ("mount -n $di->{esp} $targetdir/boot/efi") == 0 ||
+ die "unable to mount $di->{esp}\n";
+ my $rc = syscmd ("chroot $targetdir /usr/sbin/grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' $dev");
+ if ($rc != 0) {
+ if (-d '/sys/firmware/efi') {
+ die "unable to install the EFI boot loader on '$dev'\n";
+ } else {
+ warn "unable to install the EFI boot loader on '$dev', ignoring (not booted using UEFI)\n";
+ }
+ }
+ # also install fallback boot file (OVMF does not boot without)
+ mkdir("$targetdir/boot/efi/EFI/BOOT");
+ syscmd("cp $targetdir/boot/efi/EFI/proxmox/grubx64.efi $targetdir/boot/efi/EFI/BOOT/BOOTx64.EFI") == 0 ||
+ die "unable to copy efi boot loader\n";
+
+ syscmd ("umount $targetdir/boot/efi") == 0 ||
+ die "unable to umount $targetdir/boot/efi\n";
+ }
+ }
syscmd ("chroot $targetdir /usr/sbin/update-grub") == 0 ||
- die "unable to install the boot loader\n";
+ die "unable to update boot loader config\n";
syscmd ("umount $targetdir/dev");
}
-
# cleanup
# hack: remove dead.letter from sshd installation
write_config ("user:root\@pam:1:0:::${mailto}::\n",
"$tmpdir/user.cfg");
+ # write storage.cfg
+ my $strorage_cfg_fn = "$tmpdir/storage.cfg";
+ if ($use_zfs) {
+ write_config ($storage_cfg_zfs, $strorage_cfg_fn);
+ } elsif ($use_btrfs) {
+ write_config ($storage_cfg_btrfs, $strorage_cfg_fn);
+ } else {
+ write_config ($storage_cfg_lvmthin, $strorage_cfg_fn);
+ }
+
run_command("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
syscmd ("rm -rf $tmpdir");
print $err if $err;
if ($opt_testmode) {
+ my $elapsed = Time::HiRes::tv_interval($starttime);
+ print "Elapsed extract time: $elapsed\n";
+
syscmd ("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> pve-final.pkglist");
}
- syscmd ("umount $targetdir/boot");
syscmd ("umount $targetdir/var/lib/vz");
syscmd ("umount $targetdir/tmp");
syscmd ("umount $targetdir/proc");
syscmd ("umount $targetdir/sys");
- syscmd ("umount -d $targetdir");
- die $err if $err;
-}
+ if ($use_zfs) {
+ syscmd ("zfs umount -a") == 0 ||
+ die "unable to unmount zfs\n";
+ } else {
+ syscmd ("umount -d $targetdir");
+ }
-sub display_html {
- my ($filename) = @_;
+ if (!$err && $use_zfs) {
+ syscmd ("zfs set sync=standard $zfspoolname") == 0 ||
+ die "unable to set zfs properties\n";
- my $url = "file://${proxmox_dir}/html/$filename";
- $htmlview->load_uri($url);
+ syscmd ("zfs set mountpoint=/ $zfspoolname/ROOT/pve-1") == 0 ||
+ die "zfs set mountpoint failed\n";
+
+ syscmd ("zpool set bootfs=$zfspoolname/ROOT/pve-1 $zfspoolname") == 0 ||
+ die "zfs set bootfs failed\n";
+ }
+
+ die $err if $err;
}
-sub display_html_old {
+sub display_html {
my ($filename) = @_;
- $htmlview->set_document(undef);
-
- my $document;
+ my $path = "${proxmox_dir}/html/$filename";
+ my $url = "file://$path";
- $document->clear;
- $htmlview->set_document($document);
+ my $data = file_get_contents($path);
- $document->open_stream ("text/html");
-
- my $fn = "${proxmox_dir}/html/$filename";
- open (HTML, $fn) ||
- die "unable to open file '$fn' - $!\n";
- while (<HTML>) { $document->write_stream ($_); }
- close (HTML);
+ if ($filename eq 'license.htm') {
+ my $licensefn = -f "/EULA" ? "/EULA" :
+ $opt_testmode ? "./copyright" :
+ "/usr/share/doc/pve-installer/copyright";
+ my $license = decode('utf8', file_get_contents($licensefn));
+ $license =~ m/^\s+(.+\n)/;
+ my $title = $licensefn eq '/EULA' ? "END USER LICENSE AGREEMENT (EULA)": $1;
+ $data =~ s/__LICENSE__/$license/;
+ $data =~ s/__LICENSE_TITLE__/$title/;
+ }
- $document->close_stream;
+ $htmlview->load_html_string($data, $url);
}
sub set_next {
if (-f $path) {
open (HTMLTMP, $path) ||
- die "unable to open file '$path' - $! ";
+ die "unable to open file '$path' - $!\n";
my $buf;
while (my $i = read (HTMLTMP, $buf, 4096)) {
$stream->write ($buf);
- Gtk3->main_iteration while Gtk3->events_pending;
+ Gtk3::main_iteration() while Gtk3::events_pending();
}
close (HTMLTMP);
}
$window = Gtk3::Window->new ();
$window->set_default_size (1024, 768);
+ $window->set_has_resize_grip(0);
$window->set_decorated (0) if !$opt_testmode;
my $vbox = Gtk3::VBox->new (0, 0);
- my $image = Gtk3::Image->new_from_file ("${proxmox_dir}/proxlogo.xpm");
+ my $image = Gtk3::Image->new_from_file ("${proxmox_dir}/proxlogo.png");
$vbox->pack_start ($image, 0, 0, 0);
my $hbox = Gtk3::HBox->new (0, 0);
$window->realize ();
}
-sub cleanup_view {
- my $list = $inbox->get_children;
- foreach my $c (@$list) {
- next if !defined ($c);
- $inbox->remove ($c);
- }
+sub cleanup_view {
+ $inbox->foreach(sub {
+ my $child = shift;
+ $inbox->remove ($child);
+ });
+}
+
+# fixme: newer GTK3 has special properties to handle numbers with Entry
+# only allow floating point numbers with Gtk3::Entry
+
+sub check_float {
+ my ($entry, $event) = @_;
+
+ return check_number($entry, $event, 1);
}
-sub check_num {
+sub check_int {
my ($entry, $event) = @_;
+ return check_number($entry, $event, 0);
+}
- my $val = $event->get_keyval;
+sub check_number {
+ my ($entry, $event, $float) = @_;
- if ($val == ord '.') {
- $entry->get_parent->child_focus ('right');
- return 1;
- }
+ my $val = $event->get_keyval;
- if ($val == Gtk3::Gdk::KEY_ISO_Left_Tab ||
+ if (($float && $val == ord '.') ||
+ $val == Gtk3::Gdk::KEY_ISO_Left_Tab ||
$val == Gtk3::Gdk::KEY_Shift_L ||
$val == Gtk3::Gdk::KEY_Tab ||
+ $val == Gtk3::Gdk::KEY_Left ||
+ $val == Gtk3::Gdk::KEY_Right ||
$val == Gtk3::Gdk::KEY_BackSpace ||
$val == Gtk3::Gdk::KEY_Delete ||
($val >= ord '0' && $val <= ord '9') ||
return 1;
}
-sub check_range {
- my ($entry, $event) = @_;
-
- my $text = $entry->get_text;
- if (!defined($text) || ($text !~ m/^(\d+)$/) || ($1 > 255)) {
- $entry->set_text ($entry->{default});
- }
-
- return undef;
-}
-
-
-sub creat_text_input {
+sub create_text_input {
my ($default, $text) = @_;
my $hbox = Gtk3::HBox->new (0, 0);
return ($hbox, $e1);
}
-sub creat_ip_input {
- my ($init, $default, $text) = @_;
+sub get_ip_config {
- my (@ips) = split /\./, $init;
- my (@defs) = split /\./, $default;
+ my $ifaces = {};
+ my $default;
- my $hbox = Gtk3::HBox->new (0, 0);
+ my $links = `ip -o l`;
+ foreach my $l (split /\n/,$links) {
+ my ($index, $name, $flags, $state, $mac) = $l =~ m/^(\d+):\s+(\S+):\s+<(\S+)>.*\s+state\s+(\S+)\s+.*\s+link\/ether\s+(\S+)\s+/;
+ next if !$name || $name eq 'lo';
- my $label = Gtk3::Label->new ($text);
- $label->set_size_request (150, -1);
- $label->set_alignment (1, 0.5);
- $hbox->pack_start ($label, 0, 0, 10);
+ my $driver = readlink "/sys/class/net/$name/device/driver" || 'unknown';
+ $driver =~ s!^.*/!!;
- my $e1 = Gtk3::Entry->new();
- $e1->set_max_length(3);
- $e1->{default} = $defs[0];
- $hbox->pack_start ($e1, 0, 0, 0);
- $e1->set_width_chars (3);
- $e1->set_text ($ips[0]);
- $e1->signal_connect (key_press_event => \&check_num);
- $e1->signal_connect (focus_out_event => \&check_range);
-
- my $l1 = Gtk3::Label->new (".");
- $hbox->pack_start ($l1, 0, 0, 2);
-
- my $e2 = Gtk3::Entry->new();
- $e2->set_max_length(3);
- $e2->{default} = $defs[1];
- $hbox->pack_start ($e2, 0, 0, 0);
- $e2->set_width_chars (3);
- $e2->set_text ($ips[1]);
- $e2->signal_connect (key_press_event => \&check_num);
- $e2->signal_connect (focus_out_event => \&check_range);
-
- my $l2 = Gtk3::Label->new (".");
- $hbox->pack_start ($l2, 0, 0, 2);
-
- my $e3 = Gtk3::Entry->new();
- $e3->set_max_length(3);
- $e3->{default} = $defs[2];
- $hbox->pack_start ($e3, 0, 0, 0);
- $e3->set_width_chars (3);
- $e3->set_text ($ips[2]);
- $e3->signal_connect (key_press_event => \&check_num);
- $e3->signal_connect (focus_out_event => \&check_range);
-
- my $l3 = Gtk3::Label->new (".");
- $hbox->pack_start ($l3, 0, 0, 2);
-
- my $e4 = Gtk3::Entry->new();
- $e4->set_max_length(3);
- $e4->{default} = $defs[3];
- $hbox->pack_start ($e4, 0, 0, 0);
- $e4->set_width_chars (3);
- $e4->set_text ($ips[3]);
- $e4->signal_connect (key_press_event => \&check_num);
- $e4->signal_connect (focus_out_event => \&check_range);
-
- return ($hbox, $e1, $e2, $e3, $e4);
-}
+ $ifaces->{"$index"} = {
+ name => $name,
+ driver => $driver,
+ flags => $flags,
+ state => $state,
+ mac => $mac,
+ };
-sub get_ip_config {
+ my $addresses = `ip -o a s $name`;
+ foreach my $a (split /\n/,$addresses) {
+ my ($family, $ip, $prefix) = $a =~ m/^\Q$index\E:\s+\Q$name\E\s+(inet|inet6)\s+($IPRE)\/(\d+)\s+/;
+ next if !$ip;
+
+ my $mask = $prefix;
- my $ifconfig = `ifconfig eth0`;
+ if ($family eq 'inet') {
+ next if !$ip =~ /$IPV4RE/;
+ next if $prefix < 8 || $prefix > 32;
+ $mask = @$ipv4_reverse_mask[$prefix];
+ } else {
+ next if !$ip =~ /$IPV6RE/;
+ }
+
+ $default = $index if !$default;
+
+ $ifaces->{"$index"}->{"$family"} = {
+ mask => $mask,
+ addr => $ip,
+ };
+ }
+ }
- my ($addr) = $ifconfig =~ m/inet addr:(\S*)/m;
- my ($mask) = $ifconfig =~ m/Mask:(\S*)/m;
- my $route = `route -n`;
- my ($gateway) = $route =~ m/^0\.0\.0\.0\s+(\d+\.\d+\.\d+\.\d+)\s+/m;
+ my $route = `ip route`;
+ my ($gateway) = $route =~ m/^default\s+via\s+(\S+)\s+/m;
my $resolvconf = `cat /etc/resolv.conf`;
my ($dnsserver) = $resolvconf =~ m/^nameserver\s+(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/m;
+ my ($domain) = $resolvconf =~ m/^domain\s+(\S+)$/m;
return {
- addr => $addr,
- mask => $mask,
+ default => $default,
+ ifaces => $ifaces,
gateway => $gateway,
dnsserver => $dnsserver,
+ domain => $domain,
}
}
$dialog->destroy();
}
+my $ipconf_first_view = 1;
+
sub create_ipconf_view {
cleanup_view ();
my $vbox2 = Gtk3::VBox->new (0, 0);
$hbox->add ($vbox2);
- my $addr = $ipconf->{addr} || '192.168.100.2';
- my $mask = $ipconf->{mask} || '255.255.255.0';
+ my $ipbox;
+ ($ipbox, $ipconf_entry_addr) =
+ create_text_input ("192.168.100.2", 'IP Address:');
+
+ my $maskbox;
+ ($maskbox, $ipconf_entry_mask) =
+ create_text_input ("255.255.255.0", 'Netmask:');
+
+ my $device_cb = Gtk3::ComboBoxText->new();
+ $device_cb->set_active(0);
+ $device_cb->set_visible(1);
+
+ my $get_device_desc = sub {
+ my $iface = shift;
+ return "$iface->{name} - $iface->{mac} ($iface->{driver})";
+ };
+
+ my $device_active_map = {};
+
+ my $device_change_handler = sub {
+ my $current = shift;
+ $ipconf->{selected} = $device_active_map->{$current->get_active()};
+ my $iface = $ipconf->{ifaces}->{$ipconf->{selected}};
+ $ipconf_entry_addr->set_text($iface->{inet}->{addr} || $iface->{inet6}->{addr})
+ if $iface->{inet}->{addr} || $iface->{inet6}->{addr};
+ $ipconf_entry_mask->set_text($iface->{inet}->{mask} || $iface->{inet6}->{mask})
+ if $iface->{inet}->{mask} || $iface->{inet6}->{mask};
+ };
+
+ my $i = 0;
+ foreach my $index (sort keys %{$ipconf->{ifaces}}) {
+ $device_cb->append_text(&$get_device_desc($ipconf->{ifaces}->{$index}));
+ $device_active_map->{$i} = $index;
+ if ($ipconf_first_view && $index == $ipconf->{default}) {
+ $device_cb->set_active($i);
+ &$device_change_handler($device_cb);
+ $ipconf_first_view = 0;
+ }
+ $device_cb->signal_connect ('changed' => $device_change_handler);
+ $i++;
+ }
+
+ $device_cb->set_active(0)
+ if !($ipconf->{selected});
+
+ my $devicebox = Gtk3::HBox->new (0, 0);
+ my $label = Gtk3::Label->new ("Management Interface:");
+ $label->set_size_request (150, -1);
+ $label->set_alignment (1, 0.5);
+ $devicebox->pack_start ($label, 0, 0, 10);
+ $devicebox->pack_start ($device_cb, 0, 0, 0);
+ $vbox2->pack_start ($devicebox, 0, 0, 2);
+
+ my $hn = $ipconf->{domain} ? "pve.$ipconf->{domain}" : 'pve.example.invalid';
+
my ($hostbox, $hostentry) =
- creat_text_input ('proxmox.domain.tld', 'Hostname (FQDN):');
+ create_text_input ($hn, 'Hostname (FQDN):');
$vbox2->pack_start ($hostbox, 0, 0, 2);
- my $ipbox;
- ($ipbox, $ip_1, $ip_2, $ip_3, $ip_4) =
- creat_ip_input ($addr, '0.0.0.0', 'IP Address:');
$vbox2->pack_start ($ipbox, 0, 0, 2);
- my $maskbox;
- ($maskbox, $mask_1, $mask_2, $mask_3, $mask_4) =
- creat_ip_input ($mask, '255.255.255.0', 'Netmask:');
$vbox2->pack_start ($maskbox, 0, 0, 2);
$gateway = $ipconf->{gateway} || '192.168.100.1';
my $gwbox;
- ($gwbox, $gw_1, $gw_2, $gw_3, $gw_4) =
- creat_ip_input ($gateway, '0.0.0.0', 'Gateway:');
+ ($gwbox, $ipconf_entry_gw) =
+ create_text_input ($gateway, 'Gateway:');
$vbox2->pack_start ($gwbox, 0, 0, 2);
$dnsserver = $ipconf->{dnsserver} || $gateway;
my $dnsbox;
- ($dnsbox, $dns_1, $dns_2, $dns_3, $dns_4) =
- creat_ip_input ($dnsserver, '0.0.0.0', 'DNS Server:');
+ ($dnsbox, $ipconf_entry_dns) =
+ create_text_input ($dnsserver, 'DNS Server:');
$vbox2->pack_start ($dnsbox, 0, 0, 0);
$inbox->show_all;
set_next (undef, sub {
+
+ # verify hostname
+
my $text = $hostentry->get_text();
$text =~ s/^\s+//;
my $namere = "([a-zA-Z0-9]([a-zA-Z0-9\-]*[a-zA-Z0-9])?)";
- if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.domain.tld$/ &&
+ # Debian does not support purely numeric hostnames
+ if ($text && $text =~ /^[0-9]+(?:\.|$)/) {
+ display_message("Purely numeric hostnames are not allowed.");
+ $hostentry->grab_focus();
+ return;
+ }
+
+ if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.example.invalid$/ &&
$text =~ m/^([^\.]+)\.(\S+)$/) {
$hostname = $1;
$domain = $2;
- create_extract_view ();
+ } else {
+ display_message ("Hostname does not look like a fully qualified domain name.");
+ $hostentry->grab_focus();
+ return;
+ }
+
+ # verify ip address
+
+ $text = $ipconf_entry_addr->get_text();
+ $text =~ s/^\s+//;
+ $text =~ s/\s+$//;
+ if ($text =~ m!^($IPV4RE)$!) {
+ $ipaddress = $text;
+ $ipversion = 4;
+ } elsif ($text =~ m!^($IPV6RE)$!) {
+ $ipaddress = $text;
+ $ipversion = 6;
+ } else {
+ display_message ("IP address is not valid.");
+ $ipconf_entry_addr->grab_focus();
+ return;
+ }
+
+ $text = $ipconf_entry_mask->get_text();
+ $text =~ s/^\s+//;
+ $text =~ s/\s+$//;
+ if (($ipversion == 6) && ($text =~ m/^(\d+)$/) && ($1 >= 8) && ($1 <= 126)) {
+ $netmask = $text;
+ } elsif (($ipversion == 4) && defined($ipv4_mask_hash->{$text})) {
+ $netmask = $text;
+ } else {
+ display_message ("Netmask is not valid.");
+ $ipconf_entry_mask->grab_focus();
+ return;
+ }
+
+ $text = $ipconf_entry_gw->get_text();
+ $text =~ s/^\s+//;
+ $text =~ s/\s+$//;
+ if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
+ $gateway = $text;
+ } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
+ $gateway = $text;
+ } else {
+ display_message ("Gateway is not valid.");
+ $ipconf_entry_gw->grab_focus();
return;
}
- display_message ("Hostname does not look like a fully qualified domain name.");
- $hostentry->grab_focus();
+
+ $text = $ipconf_entry_dns->get_text();
+ $text =~ s/^\s+//;
+ $text =~ s/\s+$//;
+ if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
+ $dnsserver = $text;
+ } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
+ $dnsserver = $text;
+ } else {
+ display_message ("DNS server is not valid.");
+ $ipconf_entry_dns->grab_focus();
+ return;
+ }
+
+ #print "TEST $ipaddress $netmask $gateway $dnsserver\n";
+
+ create_extract_view ();
});
$hostentry->grab_focus();
sub get_device_desc {
my ($devname, $size, $model) = @_;
- if ($size && ($size > 0) && $model) {
- $size = int($size/2048); # size in MB
+ if ($size && ($size > 0)) {
+ $size = int($size/2048); # size in MB, from 512B "sectors"
+ my $text = "$devname (";
if ($size >= 1024) {
$size = int($size/1024); # size in GB
- return "$devname (${size}GB, $model)";
+ $text .= "${size}GB";
} else {
- return "$devname (${size}MB, $model)";
+ $text .= "${size}MB";
}
+ $text .= ", $model" if $model;
+ $text .= ")";
+
} else {
return $devname;
}
$sel = $timezone; # used once to select default
}
- my $cb = $lastzonecb = Gtk3::ComboBoxText->new_with_entry();
+ my $cb = $lastzonecb = Gtk3::ComboBoxText->new();
$cb->set_size_request (200, -1);
$cb->signal_connect ('changed' => sub {
$hbox3->pack_start ($label, 0, 0, 10);
my $eme = Gtk3::Entry->new ();
$eme->set_size_request (200, -1);
+ $eme->set_text('mail@example.invalid');
$hbox3->pack_start ($eme, 0, 0, 0);
my $t3 = $eme->get_text;
if ($t3 !~ m/^\S+\@\S+\.\S+$/) {
- display_message ("E-Mail does not look like a vaild address" .
+ display_message ("E-Mail does not look like a valid address" .
" (user\@domain.tld)");
$eme->grab_focus();
return;
+ }
+ if ($t3 eq 'mail@example.invalid') {
+ display_message ("Please enter a valid E-Mail address");
+ $eme->grab_focus();
+ return;
}
$password = $t1;
$label->set_alignment (1, 0.5);
$hbox3->pack_start ($label, 0, 0, 10);
- my $kmapcb = Gtk3::ComboBoxText->new_with_entry ();
+ my $kmapcb = Gtk3::ComboBoxText->new();
$kmapcb->set_size_request (200, -1);
foreach my $layout (sort keys %{$cmap->{kmaphash}}) {
$kmapcb->append_text ($layout);
$w->grab_focus();
}
+my $target_hd_combo;
+my $target_hd_label;
+
+my $hdopion_first_setup = 1;
+
+my $create_basic_grid = sub {
+ my $grid = Gtk3::Grid->new();
+ $grid->set_visible(1);
+ $grid->set_column_spacing(10);
+ $grid->set_row_spacing(10);
+ $grid->set_hexpand(1);
+
+ $grid->set_margin_start(5);
+ $grid->set_margin_end(5);
+ $grid->set_margin_top(5);
+ $grid->set_margin_bottom(5);
+
+ return $grid;
+};
+
+my $create_label_widget_grid = sub {
+ my ($labeled_widgets) = @_;
+
+ my $grid = &$create_basic_grid();
+ my $row = 0;
+
+ for (my $i = 0; $i < @$labeled_widgets; $i += 2) {
+ my $widget = @$labeled_widgets[$i+1];
+ my $label = Gtk3::Label->new(@$labeled_widgets[$i]);
+ $label->set_visible(1);
+ $label->set_alignment (1, 0.5);
+ $grid->attach($label, 0, $row, 1, 1);
+ $widget->set_visible(1);
+ $grid->attach($widget, 1, $row, 1, 1);
+ $row++;
+ }
+
+ return $grid;
+};
+
+my $create_raid_disk_grid = sub {
+ my $disk_labeled_widgets = [];
+ for (my $i = 0; $i < @$hds; $i++) {
+ my $disk_selector = Gtk3::ComboBoxText->new();
+ $disk_selector->append_text("-- do not use --");
+ $disk_selector->set_active(0);
+ $disk_selector->set_visible(1);
+ foreach my $hd (@$hds) {
+ my ($disk, $devname, $size, $model) = @$hd;
+ $disk_selector->append_text(get_device_desc ($devname, $size, $model));
+ $disk_selector->{pve_disk_id} = $i;
+ $disk_selector->signal_connect (changed => sub {
+ my $w = shift;
+ my $diskid = $w->{pve_disk_id};
+ my $a = $w->get_active - 1;
+ $config_options->{"disksel${diskid}"} = ($a >= 0) ? $hds->[$a] : undef;
+ });
+ }
+
+ if ($hdopion_first_setup) {
+ $disk_selector->set_active ($i+1) if $hds->[$i];
+ } else {
+ my $hdind = 0;
+ if (my $cur_hd = $config_options->{"disksel$i"}) {
+ foreach my $hd (@$hds) {
+ if (@$hd[1] eq @$cur_hd[1]) {
+ $disk_selector->set_active($hdind+1);
+ last;
+ }
+ $hdind++;
+ }
+ }
+ }
+
+ push @$disk_labeled_widgets, "Harddisk $i", $disk_selector;
+ }
+
+ my $scrolled_window = Gtk3::ScrolledWindow->new();
+ $scrolled_window->set_hexpand(1);
+ $scrolled_window->add(&$create_label_widget_grid($disk_labeled_widgets));
+ $scrolled_window->set_policy('never', 'automatic');
+
+ return $scrolled_window;
+# &$create_label_widget_grid($disk_labeled_widgets)
+};
+
+my $create_raid_advanced_grid = sub {
+ my $labeled_widgets = [];
+ my $spinbutton_ashift = Gtk3::SpinButton->new_with_range(9,13,1);
+ $spinbutton_ashift->set_tooltip_text("zpool ashift property (pool sector size, default 2^12)");
+ $spinbutton_ashift->signal_connect ("value-changed" => sub {
+ my $w = shift;
+ $config_options->{ashift} = $w->get_value_as_int();
+ });
+ $config_options->{ashift} = 12 if ! defined($config_options->{ashift});
+ $spinbutton_ashift->set_value($config_options->{ashift});
+ push @$labeled_widgets, "ashift";
+ push @$labeled_widgets, $spinbutton_ashift;
+
+ my $combo_compress = Gtk3::ComboBoxText->new();
+ $combo_compress->set_tooltip_text("zfs compression algorithm for rpool dataset");
+ # note: gzip / lze not allowed for bootfs vdevs
+ my $comp_opts = ["on","off","lzjb","lz4"];
+ foreach my $opt (@$comp_opts) {
+ $combo_compress->append($opt, $opt);
+ }
+ $config_options->{compress} = "on" if !defined($config_options->{compress});
+ $combo_compress->set_active_id($config_options->{compress});
+ $combo_compress->signal_connect (changed => sub {
+ my $w = shift;
+ $config_options->{compress} = $w->get_active_text();
+ });
+ push @$labeled_widgets, "compress";
+ push @$labeled_widgets, $combo_compress;
+
+ my $combo_checksum = Gtk3::ComboBoxText->new();
+ $combo_checksum->set_tooltip_text("zfs checksum algorithm for rpool dataset");
+ my $csum_opts = ["on", "off","fletcher2", "fletcher4", "sha256"];
+ foreach my $opt (@$csum_opts) {
+ $combo_checksum->append($opt, $opt);
+ }
+ $config_options->{checksum} = "on" if !($config_options->{checksum});
+ $combo_checksum->set_active_id($config_options->{checksum});
+ $combo_checksum->signal_connect (changed => sub {
+ my $w = shift;
+ $config_options->{checksum} = $w->get_active_text();
+ });
+ push @$labeled_widgets, "checksum";
+ push @$labeled_widgets, $combo_checksum;
+
+ my $spinbutton_copies = Gtk3::SpinButton->new_with_range(1,3,1);
+ $spinbutton_copies->set_tooltip_text("zfs copies property for rpool dataset (in addition to RAID redundancy!)");
+ $spinbutton_copies->signal_connect ("value-changed" => sub {
+ my $w = shift;
+ $config_options->{copies} = $w->get_value_as_int();
+ });
+ $config_options->{copies} = 1 if !defined($config_options->{copies});
+ $spinbutton_copies->set_value($config_options->{copies});
+ push @$labeled_widgets, "copies", $spinbutton_copies;
+
+ return &$create_label_widget_grid($labeled_widgets);;
+};
+
+sub create_hdoption_view {
+
+ my $dialog = Gtk3::Dialog->new();
+
+ $dialog->set_title("Harddisk options");
+
+ $dialog->add_button("_OK", 1);
+
+ my $contarea = $dialog->get_content_area();
+
+ my $hbox2 = Gtk3::Box->new('horizontal', 0);
+ $contarea->pack_start($hbox2, 1, 1, 10);
+
+ my $grid = Gtk3::Grid->new();
+ $grid->set_column_spacing(10);
+ $grid->set_row_spacing(10);
+
+ $hbox2->pack_start($grid, 1, 0, 10);
+
+ my $row = 0;
+
+ # Filesystem type
+
+ my $label0 = Gtk3::Label->new ("Filesystem");
+ $label0->set_alignment (1, 0.5);
+ $grid->attach($label0, 0, $row, 1, 1);
+
+ my $fstypecb = Gtk3::ComboBoxText->new();
+
+ my $fstype = ['ext3', 'ext4', 'xfs',
+ 'zfs (RAID0)', 'zfs (RAID1)',
+ 'zfs (RAID10)', 'zfs (RAIDZ-1)',
+ 'zfs (RAIDZ-2)', 'zfs (RAIDZ-3)'];
+
+ push @$fstype, 'btrfs (RAID0)', 'btrfs (RAID1)', 'btrfs (RAID10)'
+ if $enable_btrfs;
+
+ my $tcount = 0;
+ foreach my $tmp (@$fstype) {
+ $fstypecb->append_text($tmp);
+ $fstypecb->set_active ($tcount)
+ if $config_options->{filesys} eq $tmp;
+ $tcount++;
+ }
+
+ $grid->attach($fstypecb, 1, $row, 1, 1);
+
+ $hbox2->show_all();
+
+ $row++;
+
+ my $sep = Gtk3::HSeparator->new();
+ $sep->set_visible(1);
+ $grid->attach($sep, 0, $row, 2, 1);
+ $row++;
+
+ my $hdsize_labeled_widgets = [];
+
+ # size compute
+ my $hdsize = 0;
+ if ( -b $target_hd) {
+ $hdsize = int(hd_size ($target_hd) / (1024*1024.0)); # size in GB
+ } elsif ($target_hd) {
+ $hdsize = int((-s $target_hd) / (1024*1024*1024.0));
+ }
+
+ my $hdsize_size_adj = Gtk3::Adjustment->new($config_options->{hdsize} || $hdsize, 0, $hdsize+1, 1, 1, 1);
+ my $spinbutton_hdsize = Gtk3::SpinButton->new($hdsize_size_adj, 1, 1);
+ $spinbutton_hdsize->set_tooltip_text("only use specified size (GB) of the harddisk (rest left unpartitioned)");
+ push @$hdsize_labeled_widgets, "hdsize", $spinbutton_hdsize;
+
+ my $entry_swapsize = Gtk3::Entry->new();
+ $entry_swapsize->set_tooltip_text("maximum SWAP size (GB)");
+ $entry_swapsize->signal_connect (key_press_event => \&check_float);
+ $entry_swapsize->set_text($config_options->{swapsize}) if $config_options->{swapsize};
+ push @$hdsize_labeled_widgets, "swapsize", $entry_swapsize;
+
+ my $entry_maxroot = Gtk3::Entry->new();
+ $entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
+ $entry_maxroot->signal_connect (key_press_event => \&check_float);
+ $entry_maxroot->set_text($config_options->{maxroot}) if $config_options->{maxroot};
+ push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
+
+ my $entry_minfree = Gtk3::Entry->new();
+ $entry_minfree->set_tooltip_text("minimum free LVM space (GB, required for LVM snapshots)");
+ $entry_minfree->signal_connect (key_press_event => \&check_float);
+ $entry_minfree->set_text($config_options->{minfree}) if $config_options->{minfree};
+ push @$hdsize_labeled_widgets, "minfree", $entry_minfree;
+
+ my $entry_maxvz = Gtk3::Entry->new();
+ $entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
+ $entry_maxvz->signal_connect (key_press_event => \&check_float);
+ $entry_maxvz->set_text($config_options->{maxvz}) if $config_options->{maxvz};
+ push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
+
+ my $options_stack = Gtk3::Stack->new();
+ $options_stack->set_visible(1);
+ $options_stack->set_hexpand(1);
+ $options_stack->set_vexpand(1);
+ $options_stack->add_titled(&$create_raid_disk_grid(), "raiddisk", "Disk Setup");
+ $options_stack->add_titled(&$create_label_widget_grid($hdsize_labeled_widgets), "hdsize", "Size Options");
+ $options_stack->add_titled(&$create_raid_advanced_grid("zfs"), "raidzfsadvanced", "Advanced Options");
+ $options_stack->set_visible_child_name("raiddisk");
+ my $options_stack_switcher = Gtk3::StackSwitcher->new();
+ $options_stack_switcher->set_halign('center');
+ $options_stack_switcher->set_stack($options_stack);
+ $grid->attach($options_stack_switcher, 0, $row, 2, 1);
+ $row++;
+ $grid->attach($options_stack, 0, $row, 2, 1);
+ $row++;
+
+ $hdopion_first_setup = 0;
+
+ my $switch_view = sub {
+ my $raid = $config_options->{filesys} =~ m/zfs|btrfs/;
+ my $enable_zfs_opts = $config_options->{filesys} =~ m/zfs/;
+
+ $target_hd_combo->set_visible(!$raid);
+ $options_stack->get_child_by_name("hdsize")->set_visible(!$raid);
+ $options_stack->get_child_by_name("raiddisk")->set_visible($raid);
+ $options_stack_switcher->set_visible($enable_zfs_opts);
+ $options_stack->get_child_by_name("raidzfsadvanced")->set_visible($enable_zfs_opts);
+ if ($raid) {
+ $target_hd_label->set_text("Target: $config_options->{filesys} ");
+ $options_stack->set_visible_child_name("raiddisk");
+ } else {
+ $target_hd_label->set_text("Target Harddisk: ");
+ }
+ my (undef, $pref_width) = $dialog->get_preferred_width();
+ my (undef, $pref_height) = $dialog->get_preferred_height();
+ $dialog->resize($pref_width, $pref_height);
+ };
+
+ &$switch_view();
+
+ $fstypecb->signal_connect (changed => sub {
+ $config_options->{filesys} = $fstypecb->get_active_text();
+ &$switch_view();
+ });
+
+ $dialog->show();
+
+ $dialog->run();
+
+ my $get_float = sub {
+ my ($entry) = @_;
+
+ my $text = $entry->get_text();
+ return undef if !defined($text);
+
+ $text =~ s/^\s+//;
+ $text =~ s/\s+$//;
+
+ return undef if $text !~ m/^\d+(\.\d+)?$/;
+
+ return $text;
+ };
+
+ my $tmp;
+
+ if (($tmp = &$get_float($spinbutton_hdsize)) && ($tmp != $hdsize)) {
+ $config_options->{hdsize} = $tmp;
+ } else {
+ delete $config_options->{hdsize};
+ }
+
+ if (defined($tmp = &$get_float($entry_swapsize))) {
+ $config_options->{swapsize} = $tmp;
+ } else {
+ delete $config_options->{swapsize};
+ }
+
+ if (defined($tmp = &$get_float($entry_maxroot))) {
+ $config_options->{maxroot} = $tmp;
+ } else {
+ delete $config_options->{maxroot};
+ }
+
+ if (defined($tmp = &$get_float($entry_minfree))) {
+ $config_options->{minfree} = $tmp;
+ } else {
+ delete $config_options->{minfree};
+ }
+
+ if (defined($tmp = &$get_float($entry_maxvz))) {
+ $config_options->{maxvz} = $tmp;
+ } else {
+ delete $config_options->{maxvz};
+ }
+
+ $dialog->destroy();
+}
+
+my $get_raid_devlist = sub {
+
+ my $dev_name_hash = {};
+
+ my $devlist = [];
+ for (my $i = 0; $i < @$hds; $i++) {
+ if (my $hd = $config_options->{"disksel$i"}) {
+ my ($disk, $devname, $size, $model) = @$hd;
+ die "device '$devname' is used more than once\n"
+ if $dev_name_hash->{$devname};
+ $dev_name_hash->{$devname} = $hd;
+ push @$devlist, $hd;
+ }
+ }
+
+ return $devlist;
+};
+
+sub zfs_mirror_size_check {
+ my ($expected, $actual) = @_;
+
+ die "mirrored disks must have same size\n"
+ if abs($expected - $actual) > $expected / 10;
+}
+
+sub get_zfs_raid_setup {
+
+ my $filesys = $config_options->{filesys};
+
+ my $devlist = &$get_raid_devlist();
+
+ my $diskcount = scalar(@$devlist);
+ die "$filesys needs at least one device\n" if $diskcount < 1;
+
+ my $bootdevlist = [];
+
+ my $cmd= '';
+ if ($filesys eq 'zfs (RAID0)') {
+ push @$bootdevlist, @$devlist[0];
+ foreach my $hd (@$devlist) {
+ $cmd .= " @$hd[1]";
+ }
+ } elsif ($filesys eq 'zfs (RAID1)') {
+ die "zfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
+ $cmd .= ' mirror ';
+ my $hd = @$devlist[0];
+ my $expected_size = @$hd[2]; # all disks need approximately same size
+ foreach $hd (@$devlist) {
+ zfs_mirror_size_check($expected_size, @$hd[2]);
+ $cmd .= " @$hd[1]";
+ push @$bootdevlist, $hd;
+ }
+ } elsif ($filesys eq 'zfs (RAID10)') {
+ die "zfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
+ die "zfs (RAID10) needs an even number of devices\n" if $diskcount & 1;
+
+ push @$bootdevlist, @$devlist[0], @$devlist[1];
+
+ for (my $i = 0; $i < $diskcount; $i+=2) {
+ my $hd1 = @$devlist[$i];
+ my $hd2 = @$devlist[$i+1];
+ zfs_mirror_size_check(@$hd1[2], @$hd2[2]); # pairs need approximately same size
+ $cmd .= ' mirror ' . @$hd1[1] . ' ' . @$hd2[1];
+ }
+
+ } elsif ($filesys =~ m/^zfs \(RAIDZ-([123])\)$/) {
+ my $level = $1;
+ my $mindisks = 2 + $level;
+ die "zfs (RAIDZ-$level) needs at least $mindisks devices\n" if scalar(@$devlist) < $mindisks;
+ my $hd = @$devlist[0];
+ my $expected_size = @$hd[2]; # all disks need approximately same size
+ $cmd .= " raidz$level";
+ foreach $hd (@$devlist) {
+ zfs_mirror_size_check($expected_size, @$hd[2]);
+ $cmd .= " @$hd[1]";
+ push @$bootdevlist, $hd;
+ }
+ } else {
+ die "unknown zfs mode '$filesys'\n";
+ }
+
+ return ($devlist, $bootdevlist, $cmd);
+}
+
+sub get_btrfs_raid_setup {
+
+ my $filesys = $config_options->{filesys};
+
+ my $devlist = &$get_raid_devlist();
+
+ my $diskcount = scalar(@$devlist);
+ die "$filesys needs at least one device\n" if $diskcount < 1;
+
+ my $mode;
+
+ if ($diskcount == 1) {
+ $mode = 'single';
+ } else {
+ if ($filesys eq 'btrfs (RAID0)') {
+ $mode = 'raid0';
+ } elsif ($filesys eq 'btrfs (RAID1)') {
+ die "btrfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
+ $mode = 'raid1';
+ } elsif ($filesys eq 'btrfs (RAID10)') {
+ die "btrfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
+ $mode = 'raid10';
+ } else {
+ die "unknown btrfs mode '$filesys'\n";
+ }
+ }
+
+ return ($devlist, $mode);
+}
+
sub create_hdsel_view {
cleanup_view ();
my ($disk, $devname, $size, $model) = @{@$hds[0]};
$target_hd = $devname;
- $master_hd = find_master ($target_hd);
- my $label;
- if (scalar (@$hds) == 1) {
- my $devdesc = get_device_desc ($devname, $size, $model);
- $label = Gtk3::Label->new ("Target Harddisk: $devdesc");
- $hbox->pack_start ($label, 0, 0, 0);
- } else {
- $label = Gtk3::Label->new ("Target Harddisks: ");
- $hbox->pack_start ($label, 0, 0, 0);
+ $target_hd_label = Gtk3::Label->new ("Target Harddisk: ");
+ $hbox->pack_start ($target_hd_label, 0, 0, 0);
- my $combo = Gtk3::ComboBoxText->new_with_entry();
- my $e = $combo->get_child();
- $e->set_width_chars(40);
+ $target_hd_combo = Gtk3::ComboBoxText->new();
- foreach my $hd (@$hds) {
- ($disk, $devname, $size, $model) = @$hd;
- $combo->append_text (get_device_desc ($devname, $size, $model));
- }
+ foreach my $hd (@$hds) {
+ ($disk, $devname, $size, $model) = @$hd;
+ $target_hd_combo->append_text (get_device_desc ($devname, $size, $model));
+ }
- $combo->set_active (0);
- $combo->signal_connect (changed => sub {
- $a = shift->get_active;
- my ($disk, $devname) = @{@$hds[$a]};
- $target_hd = $devname;
- $master_hd = find_master ($target_hd);
- });
+ $target_hd_combo->set_active (0);
+ $target_hd_combo->signal_connect (changed => sub {
+ $a = shift->get_active;
+ my ($disk, $devname) = @{@$hds[$a]};
+ $target_hd = $devname;
+ });
+
+ $hbox->pack_start ($target_hd_combo, 0, 0, 10);
+
+ my $options = Gtk3::Button->new ('_Options');
+ $options->signal_connect (clicked => \&create_hdoption_view);
+ $hbox->pack_start ($options, 0, 0, 0);
- $hbox->pack_start ($combo, 0, 0, 0);
- }
$inbox->show_all;
display_html ("page1.htm");
- set_next (undef, \&create_country_view);
-}
-
-sub create_extract_view {
- $ipaddress = $ip_1->get_text . "." . $ip_2->get_text . "." .
- $ip_3->get_text . "." . $ip_4->get_text;
-
- $netmask = $mask_1->get_text . "." . $mask_2->get_text . "." .
- $mask_3->get_text . "." . $mask_4->get_text;
+ set_next (undef, sub {
- $gateway = $gw_1->get_text . "." . $gw_2->get_text . "." .
- $gw_3->get_text . "." . $gw_4->get_text;
+ if ($config_options->{filesys} =~ m/zfs/) {
+ eval { get_zfs_raid_setup(); };
+ if (my $err = $@) {
+ display_message ("Warning: $err\n" .
+ "Please fix ZFS setup first.");
+ } else {
+ create_country_view();
+ }
+ } elsif ($config_options->{filesys} =~ m/btrfs/) {
+ eval { get_btrfs_raid_setup(); };
+ if (my $err = $@) {
+ display_message ("Warning: $err\n" .
+ "Please fix BTRFS setup first.");
+ } else {
+ create_country_view();
+ }
+ } else {
+ create_country_view();
+ }
+ });
+}
- $dnsserver = $dns_1->get_text . "." . $dns_2->get_text . "." .
- $dns_3->get_text . "." . $dns_4->get_text;
+sub create_extract_view {
- # print "TEST $ipaddress $netmask $gateway $dnsserver\n";
cleanup_view ();
display_html ("extract1-license.htm");
my $tdir = $opt_testmode ? "target" : "/target";
mkdir $tdir;
- my $base = $opt_testmode ? "/pve/$release/install/pve-base.tar" : "/proxmox/pve-base.tar";
+ my $base = $opt_testmode ? "/pve/$release/install/pve-base.squashfs" : "/cdrom/pve-base.squashfs";
eval { extract_data ($base, $tdir); };
my $err = $@;
$ipconf = get_ip_config ();
-$country = detect_country () if $ipconf->{addr};
+$country = detect_country() if $ipconf->{default} || $opt_testmode;;
# read country, kmap and timezone infos
$cmap = read_cmap ();