#
# @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1)
#
+# @postcopy-requests: The number of page requests received from the destination
+# (since 2.7)
+#
# Since: 0.14.0
##
{ 'struct': 'MigrationStats',
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
- 'mbps' : 'number', 'dirty-sync-count' : 'int' } }
+ 'mbps' : 'number', 'dirty-sync-count' : 'int',
+ 'postcopy-requests' : 'int' } }
##
# @XBZRLECacheStats
# may be expensive, but do not actually occur during the iterative
# migration rounds themselves. (since 1.6)
#
-# @x-cpu-throttle-percentage: #optional percentage of time guest cpus are being
-# throttled during auto-converge. This is only present when auto-converge
-# has started throttling guest cpus. (Since 2.5)
+# @cpu-throttle-percentage: #optional percentage of time guest cpus are being
+# throttled during auto-converge. This is only present when auto-converge
+# has started throttling guest cpus. (Since 2.7)
+#
+# @error-desc: #optional the human readable error description string, when
+# @status is 'failed'. Clients should not attempt to parse the
+# error strings. (Since 2.7)
#
# Since: 0.14.0
##
'*expected-downtime': 'int',
'*downtime': 'int',
'*setup-time': 'int',
- '*x-cpu-throttle-percentage': 'int'} }
+ '*cpu-throttle-percentage': 'int',
+ '*error-desc': 'str'} }
##
# @query-migrate
# compression, so set the decompress-threads to the number about 1/4
# of compress-threads is adequate.
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
'data': ['compress-level', 'compress-threads', 'decompress-threads',
- 'x-cpu-throttle-initial', 'x-cpu-throttle-increment'] }
+ 'cpu-throttle-initial', 'cpu-throttle-increment',
+ 'tls-creds', 'tls-hostname'] }
#
# @migrate-set-parameters
#
# @decompress-threads: decompression thread count
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'command': 'migrate-set-parameters',
'data': { '*compress-level': 'int',
'*compress-threads': 'int',
'*decompress-threads': 'int',
- '*x-cpu-throttle-initial': 'int',
- '*x-cpu-throttle-increment': 'int'} }
+ '*cpu-throttle-initial': 'int',
+ '*cpu-throttle-increment': 'int',
+ '*tls-creds': 'str',
+ '*tls-hostname': 'str'} }
#
# @MigrationParameters
#
# @decompress-threads: decompression thread count
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
-#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
# Since: 2.4
##
'data': { 'compress-level': 'int',
'compress-threads': 'int',
'decompress-threads': 'int',
- 'x-cpu-throttle-initial': 'int',
- 'x-cpu-throttle-increment': 'int'} }
+ 'cpu-throttle-initial': 'int',
+ 'cpu-throttle-increment': 'int',
+ 'tls-creds': 'str',
+ 'tls-hostname': 'str'} }
##
# @query-migrate-parameters
#
#
# @restrict: #optional isolate the guest from the host
#
+# @ipv4: #optional whether to support IPv4, default true for enabled
+# (since 2.6)
+#
+# @ipv6: #optional whether to support IPv6, default true for enabled
+# (since 2.6)
+#
# @ip: #optional legacy parameter, use net= instead
#
-# @net: #optional IP address and optional netmask
+# @net: #optional IP network address that the guest will see, in the
+# form addr[/netmask] The netmask is optional, and can be
+# either in the form a.b.c.d or as a number of valid top-most
+# bits. Default is 10.0.2.0/24.
#
# @host: #optional guest-visible address of the host
#
# @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option
# to the guest
#
-# @ip6-prefix: #optional IPv6 network prefix (default is fec0::) (since 2.6)
+# @ipv6-prefix: #optional IPv6 network prefix (default is fec0::) (since
+# 2.6). The network prefix is given in the usual
+# hexadecimal IPv6 address notation.
#
-# @ip6-prefixlen: #optional IPv6 network prefix length (default is 64) (since 2.6)
+# @ipv6-prefixlen: #optional IPv6 network prefix length (default is 64)
+# (since 2.6)
#
-# @ip6-host: #optional guest-visible IPv6 address of the host (since 2.6)
+# @ipv6-host: #optional guest-visible IPv6 address of the host (since 2.6)
#
-# @ip6-dns: #optional guest-visible IPv6 address of the virtual nameserver (since 2.6)
+# @ipv6-dns: #optional guest-visible IPv6 address of the virtual
+# nameserver (since 2.6)
#
# @smb: #optional root directory of the built-in SMB server
#
'data': {
'*hostname': 'str',
'*restrict': 'bool',
+ '*ipv4': 'bool',
+ '*ipv6': 'bool',
'*ip': 'str',
'*net': 'str',
'*host': 'str',
'*dhcpstart': 'str',
'*dns': 'str',
'*dnssearch': ['String'],
- '*ip6-prefix': 'str',
- '*ip6-prefixlen': 'int',
- '*ip6-host': 'str',
- '*ip6-dns': 'str',
+ '*ipv6-prefix': 'str',
+ '*ipv6-prefixlen': 'int',
+ '*ipv6-host': 'str',
+ '*ipv6-dns': 'str',
'*smb': 'str',
'*smbserver': 'str',
'*hostfwd': ['String'],
##
{ 'enum': 'ReplayMode',
'data': [ 'none', 'record', 'play' ] }
+
+##
+# @xen-load-devices-state:
+#
+# Load the state of all devices from file. The RAM and the block devices
+# of the VM are not loaded by this command.
+#
+# @filename: the file to load the state of the devices from as binary
+# data. See xen-save-devices-state.txt for a description of the binary
+# format.
+#
+# Since: 2.7
+##
+{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
+
+##
+# @GICCapability:
+#
+# The struct describes capability for a specific GIC (Generic
+# Interrupt Controller) version. These bits are not only decided by
+# QEMU/KVM software version, but also decided by the hardware that
+# the program is running upon.
+#
+# @version: version of GIC to be described. Currently, only 2 and 3
+# are supported.
+#
+# @emulated: whether current QEMU/hardware supports emulated GIC
+# device in user space.
+#
+# @kernel: whether current QEMU/hardware supports hardware
+# accelerated GIC device in kernel.
+#
+# Since: 2.6
+##
+{ 'struct': 'GICCapability',
+ 'data': { 'version': 'int',
+ 'emulated': 'bool',
+ 'kernel': 'bool' } }
+
+##
+# @query-gic-capabilities:
+#
+# This command is ARM-only. It will return a list of GICCapability
+# objects that describe its capability bits.
+#
+# Returns: a list of GICCapability objects.
+#
+# Since: 2.6
+##
+{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
+
+##
+# CpuInstanceProperties
+#
+# List of properties to be used for hotplugging a CPU instance,
+# it should be passed by management with device_add command when
+# a CPU is being hotplugged.
+#
+# Note: currently there are 4 properties that could be present
+# but management should be prepared to pass through other
+# properties with device_add command to allow for future
+# interface extension.
+#
+# @node: #optional NUMA node ID the CPU belongs to
+# @socket: #optional socket number within node/board the CPU belongs to
+# @core: #optional core number within socket the CPU belongs to
+# @thread: #optional thread number within core the CPU belongs to
+#
+# Since: 2.7
+##
+{ 'struct': 'CpuInstanceProperties',
+ 'data': { '*node': 'int',
+ '*socket': 'int',
+ '*core': 'int',
+ '*thread': 'int'
+ }
+}
+
+##
+# @HotpluggableCPU
+#
+# @type: CPU object type for usage with device_add command
+# @props: list of properties to be used for hotplugging CPU
+# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides
+# @qom-path: #optional link to existing CPU object if CPU is present or
+# omitted if CPU is not present.
+#
+# Since: 2.7
+##
+{ 'struct': 'HotpluggableCPU',
+ 'data': { 'type': 'str',
+ 'vcpus-count': 'int',
+ 'props': 'CpuInstanceProperties',
+ '*qom-path': 'str'
+ }
+}
+
+##
+# @query-hotpluggable-cpus
+#
+# Returns: a list of HotpluggableCPU objects.
+#
+# Since: 2.7
+##
+{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] }
projects / mirror_qemu.git / blobdiff