# @auto-converge: If enabled, QEMU will automatically throttle down the guest
# to speed up convergence of RAM migration. (since 1.6)
#
-# @x-postcopy-ram: Start executing on the migration target before all of RAM has
+# @postcopy-ram: Start executing on the migration target before all of RAM has
# been migrated, pulling the remaining pages along as needed. NOTE: If
-# the migration fails during postcopy the VM will fail. (since 2.5)
+# the migration fails during postcopy the VM will fail. (since 2.6)
#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
- 'compress', 'events', 'x-postcopy-ram'] }
+ 'compress', 'events', 'postcopy-ram'] }
##
# @MigrationCapabilityStatus
# @migrate-start-postcopy
#
# Followup to a migration command to switch the migration to postcopy mode.
-# The x-postcopy-ram capability must be set before the original migration
+# The postcopy-ram capability must be set before the original migration
# command.
#
# Since: 2.5
'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 'other' ] }
##
-# @CpuInfoBase:
+# @CpuInfo:
#
-# Common information about a virtual CPU
+# Information about a virtual CPU
#
# @CPU: the index of the virtual CPU
#
# Notes: @halted is a transient state that changes frequently. By the time the
# data is sent to the client, the guest may no longer be halted.
##
-{ 'struct': 'CpuInfoBase',
- 'data': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
- 'qom_path': 'str', 'thread_id': 'int', 'arch': 'CpuInfoArch' } }
-
-##
-# @CpuInfo:
-#
-# Information about a virtual CPU
-#
-# Since: 0.14.0
-##
-{ 'union': 'CpuInfo', 'base': 'CpuInfoBase', 'discriminator': 'arch',
+{ 'union': 'CpuInfo',
+ 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
+ 'qom_path': 'str', 'thread_id': 'int', 'arch': 'CpuInfoArch' },
+ 'discriminator': 'arch',
'data': { 'x86': 'CpuInfoX86',
'sparc': 'CpuInfoSPARC',
'ppc': 'CpuInfoPPC',
#
# @restrict: #optional isolate the guest from the host
#
+# @ipv4: #optional whether to support IPv4, default true for enabled
+# (since 2.6)
+#
+# @ipv6: #optional whether to support IPv6, default true for enabled
+# (since 2.6)
+#
# @ip: #optional legacy parameter, use net= instead
#
-# @net: #optional IP address and optional netmask
+# @net: #optional IP network address that the guest will see, in the
+# form addr[/netmask] The netmask is optional, and can be
+# either in the form a.b.c.d or as a number of valid top-most
+# bits. Default is 10.0.2.0/24.
#
# @host: #optional guest-visible address of the host
#
# @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option
# to the guest
#
+# @ipv6-prefix: #optional IPv6 network prefix (default is fec0::) (since
+# 2.6). The network prefix is given in the usual
+# hexadecimal IPv6 address notation.
+#
+# @ipv6-prefixlen: #optional IPv6 network prefix length (default is 64)
+# (since 2.6)
+#
+# @ipv6-host: #optional guest-visible IPv6 address of the host (since 2.6)
+#
+# @ipv6-dns: #optional guest-visible IPv6 address of the virtual
+# nameserver (since 2.6)
+#
# @smb: #optional root directory of the built-in SMB server
#
# @smbserver: #optional IP address of the built-in SMB server
'data': {
'*hostname': 'str',
'*restrict': 'bool',
+ '*ipv4': 'bool',
+ '*ipv6': 'bool',
'*ip': 'str',
'*net': 'str',
'*host': 'str',
'*dhcpstart': 'str',
'*dns': 'str',
'*dnssearch': ['String'],
+ '*ipv6-prefix': 'str',
+ '*ipv6-prefixlen': 'int',
+ '*ipv6-host': 'str',
+ '*ipv6-dns': 'str',
'*smb': 'str',
'*smbserver': 'str',
'*hostfwd': ['String'],
#
# 'unmapped' and 'pause' since 2.0
# 'ro' and 'kp_comma' since 2.4
+# 'kp_equals' and 'power' since 2.6
##
{ 'enum': 'QKeyCode',
'data': [ 'unmapped',
'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 'ro',
- 'kp_comma' ] }
+ 'kp_comma', 'kp_equals', 'power' ] }
##
# @KeyValue
#
# Since: 1.4 (testdev since 2.2)
##
-{ 'struct': 'ChardevDummy', 'data': { },
- 'base': 'ChardevCommon' }
-
{ 'union': 'ChardevBackend', 'data': { 'file' : 'ChardevFile',
'serial' : 'ChardevHostdev',
'parallel': 'ChardevHostdev',
'pipe' : 'ChardevHostdev',
'socket' : 'ChardevSocket',
'udp' : 'ChardevUdp',
- 'pty' : 'ChardevDummy',
- 'null' : 'ChardevDummy',
+ 'pty' : 'ChardevCommon',
+ 'null' : 'ChardevCommon',
'mux' : 'ChardevMux',
- 'msmouse': 'ChardevDummy',
- 'braille': 'ChardevDummy',
- 'testdev': 'ChardevDummy',
+ 'msmouse': 'ChardevCommon',
+ 'braille': 'ChardevCommon',
+ 'testdev': 'ChardevCommon',
'stdio' : 'ChardevStdio',
- 'console': 'ChardevDummy',
+ 'console': 'ChardevCommon',
'spicevmc' : 'ChardevSpiceChannel',
'spiceport' : 'ChardevSpicePort',
'vc' : 'ChardevVC',
# Position axis of a pointer input device (mouse, tablet).
#
# Since: 2.0
-#
-# Note that the spelling of these values may change when the
-# x-input-send-event is promoted out of experimental status.
##
{ 'enum' : 'InputAxis',
- 'data' : [ 'X', 'Y' ] }
+ 'data' : [ 'x', 'y' ] }
##
# @InputKeyEvent
'abs' : 'InputMoveEvent' } }
##
-# @x-input-send-event
+# @input-send-event
#
# Send input event(s) to guest.
#
# specified, both input devices with and without input routing config
# are admissible, but devices with input routing config take
# precedence.
-
-# Since: 2.2
-#
-# Note: this command is experimental, and not a stable API. Things that
-# might change before it becomes stable include the spelling of enum
-# values for InputButton and InputAxis, and the notion of how to designate
-# which console will receive the event.
#
+# Since: 2.6
##
-{ 'command': 'x-input-send-event',
+{ 'command': 'input-send-event',
'data': { '*device': 'str',
'*head' : 'int',
'events' : [ 'InputEvent' ] } }
##
{ 'enum': 'ReplayMode',
'data': [ 'none', 'record', 'play' ] }
+
+##
+# @GICCapability:
+#
+# The struct describes capability for a specific GIC (Generic
+# Interrupt Controller) version. These bits are not only decided by
+# QEMU/KVM software version, but also decided by the hardware that
+# the program is running upon.
+#
+# @version: version of GIC to be described. Currently, only 2 and 3
+# are supported.
+#
+# @emulated: whether current QEMU/hardware supports emulated GIC
+# device in user space.
+#
+# @kernel: whether current QEMU/hardware supports hardware
+# accelerated GIC device in kernel.
+#
+# Since: 2.6
+##
+{ 'struct': 'GICCapability',
+ 'data': { 'version': 'int',
+ 'emulated': 'bool',
+ 'kernel': 'bool' } }
+
+##
+# @query-gic-capabilities:
+#
+# This command is ARM-only. It will return a list of GICCapability
+# objects that describe its capability bits.
+#
+# Returns: a list of GICCapability objects.
+#
+# Since: 2.6
+##
+{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
projects / mirror_qemu.git / blobdiff