#
# @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1)
#
+# @postcopy-requests: The number of page requests received from the destination
+# (since 2.7)
+#
# Since: 0.14.0
##
{ 'struct': 'MigrationStats',
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
- 'mbps' : 'number', 'dirty-sync-count' : 'int' } }
+ 'mbps' : 'number', 'dirty-sync-count' : 'int',
+ 'postcopy-requests' : 'int' } }
##
# @XBZRLECacheStats
# may be expensive, but do not actually occur during the iterative
# migration rounds themselves. (since 1.6)
#
-# @x-cpu-throttle-percentage: #optional percentage of time guest cpus are being
-# throttled during auto-converge. This is only present when auto-converge
-# has started throttling guest cpus. (Since 2.5)
+# @cpu-throttle-percentage: #optional percentage of time guest cpus are being
+# throttled during auto-converge. This is only present when auto-converge
+# has started throttling guest cpus. (Since 2.7)
+#
+# @error-desc: #optional the human readable error description string, when
+# @status is 'failed'. Clients should not attempt to parse the
+# error strings. (Since 2.7)
#
# Since: 0.14.0
##
'*expected-downtime': 'int',
'*downtime': 'int',
'*setup-time': 'int',
- '*x-cpu-throttle-percentage': 'int'} }
+ '*cpu-throttle-percentage': 'int',
+ '*error-desc': 'str'} }
##
# @query-migrate
# compression, so set the decompress-threads to the number about 1/4
# of compress-threads is adequate.
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
'data': ['compress-level', 'compress-threads', 'decompress-threads',
- 'x-cpu-throttle-initial', 'x-cpu-throttle-increment'] }
+ 'cpu-throttle-initial', 'cpu-throttle-increment',
+ 'tls-creds', 'tls-hostname'] }
#
# @migrate-set-parameters
#
# @decompress-threads: decompression thread count
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'command': 'migrate-set-parameters',
'data': { '*compress-level': 'int',
'*compress-threads': 'int',
'*decompress-threads': 'int',
- '*x-cpu-throttle-initial': 'int',
- '*x-cpu-throttle-increment': 'int'} }
+ '*cpu-throttle-initial': 'int',
+ '*cpu-throttle-increment': 'int',
+ '*tls-creds': 'str',
+ '*tls-hostname': 'str'} }
#
# @MigrationParameters
#
# @decompress-threads: decompression thread count
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
-#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
# Since: 2.4
##
'data': { 'compress-level': 'int',
'compress-threads': 'int',
'decompress-threads': 'int',
- 'x-cpu-throttle-initial': 'int',
- 'x-cpu-throttle-increment': 'int'} }
+ 'cpu-throttle-initial': 'int',
+ 'cpu-throttle-increment': 'int',
+ 'tls-creds': 'str',
+ 'tls-hostname': 'str'} }
##
# @query-migrate-parameters
#
#
# @queues: #optional number of queues to be created for multiqueue capable tap
#
+# @poll-us: #optional maximum number of microseconds that could
+# be spent on busy polling for tap (since 2.7)
+#
# Since 1.2
##
{ 'struct': 'NetdevTapOptions',
'*vhostfd': 'str',
'*vhostfds': 'str',
'*vhostforce': 'bool',
- '*queues': 'uint32'} }
+ '*queues': 'uint32',
+ '*poll-us': 'uint32'} }
##
# @NetdevSocketOptions
'*queues': 'int' } }
##
-# @NetClientOptions
+# @NetClientDriver
+#
+# Available netdev drivers.
+#
+# Since 2.7
+##
+{ 'enum': 'NetClientDriver',
+ 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde', 'dump',
+ 'bridge', 'hubport', 'netmap', 'vhost-user' ] }
+
+##
+# @Netdev
+#
+# Captures the configuration of a network device.
#
-# A discriminated record of network device traits.
+# @id: identifier for monitor commands.
+#
+# @type: Specify the driver used for interpreting remaining arguments.
#
# Since 1.2
#
# 'l2tpv3' - since 2.1
-#
##
-{ 'union': 'NetClientOptions',
+{ 'union': 'Netdev',
+ 'base': { 'id': 'str', 'type': 'NetClientDriver' },
+ 'discriminator': 'type',
'data': {
'none': 'NetdevNoneOptions',
'nic': 'NetLegacyNicOptions',
'*vlan': 'int32',
'*id': 'str',
'*name': 'str',
- 'opts': 'NetClientOptions' } }
+ 'opts': 'NetLegacyOptions' } }
##
-# @Netdev
+# @NetLegacyOptions
#
-# Captures the configuration of a network device.
-#
-# @id: identifier for monitor commands.
-#
-# @opts: device type specific properties
+# Like Netdev, but for use only by the legacy command line options
#
# Since 1.2
##
-{ 'struct': 'Netdev',
+{ 'union': 'NetLegacyOptions',
'data': {
- 'id': 'str',
- 'opts': 'NetClientOptions' } }
+ 'none': 'NetdevNoneOptions',
+ 'nic': 'NetLegacyNicOptions',
+ 'user': 'NetdevUserOptions',
+ 'tap': 'NetdevTapOptions',
+ 'l2tpv3': 'NetdevL2TPv3Options',
+ 'socket': 'NetdevSocketOptions',
+ 'vde': 'NetdevVdeOptions',
+ 'dump': 'NetdevDumpOptions',
+ 'bridge': 'NetdevBridgeOptions',
+ 'netmap': 'NetdevNetmapOptions',
+ 'vhost-user': 'NetdevVhostUserOptions' } }
##
# @NetFilterDirection
# @cpu-max: maximum number of CPUs supported by the machine type
# (since 1.5.0)
#
+# @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0)
+#
# Since: 1.2.0
##
{ 'struct': 'MachineInfo',
'data': { 'name': 'str', '*alias': 'str',
- '*is-default': 'bool', 'cpu-max': 'int' } }
+ '*is-default': 'bool', 'cpu-max': 'int',
+ 'hotpluggable-cpus': 'bool'} }
##
# @query-machines:
## @ACPISlotType
#
# @DIMM: memory slot
+# @CPU: logical CPU slot (since 2.7)
#
-{ 'enum': 'ACPISlotType', 'data': [ 'DIMM' ] }
+{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
## @ACPIOSTInfo
#
{ 'enum': 'ReplayMode',
'data': [ 'none', 'record', 'play' ] }
+##
+# @xen-load-devices-state:
+#
+# Load the state of all devices from file. The RAM and the block devices
+# of the VM are not loaded by this command.
+#
+# @filename: the file to load the state of the devices from as binary
+# data. See xen-save-devices-state.txt for a description of the binary
+# format.
+#
+# Since: 2.7
+##
+{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
+
##
# @GICCapability:
#
# Since: 2.6
##
{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
+
+##
+# CpuInstanceProperties
+#
+# List of properties to be used for hotplugging a CPU instance,
+# it should be passed by management with device_add command when
+# a CPU is being hotplugged.
+#
+# Note: currently there are 4 properties that could be present
+# but management should be prepared to pass through other
+# properties with device_add command to allow for future
+# interface extension. This also requires the filed names to be kept in
+# sync with the properties passed to -device/device_add.
+#
+# @node-id: #optional NUMA node ID the CPU belongs to
+# @socket-id: #optional socket number within node/board the CPU belongs to
+# @core-id: #optional core number within socket the CPU belongs to
+# @thread-id: #optional thread number within core the CPU belongs to
+#
+# Since: 2.7
+##
+{ 'struct': 'CpuInstanceProperties',
+ 'data': { '*node-id': 'int',
+ '*socket-id': 'int',
+ '*core-id': 'int',
+ '*thread-id': 'int'
+ }
+}
+
+##
+# @HotpluggableCPU
+#
+# @type: CPU object type for usage with device_add command
+# @props: list of properties to be used for hotplugging CPU
+# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides
+# @qom-path: #optional link to existing CPU object if CPU is present or
+# omitted if CPU is not present.
+#
+# Since: 2.7
+##
+{ 'struct': 'HotpluggableCPU',
+ 'data': { 'type': 'str',
+ 'vcpus-count': 'int',
+ 'props': 'CpuInstanceProperties',
+ '*qom-path': 'str'
+ }
+}
+
+##
+# @query-hotpluggable-cpus
+#
+# Returns: a list of HotpluggableCPU objects.
+#
+# Since: 2.7
+##
+{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] }
projects / mirror_qemu.git / blobdiff