# @format: #optional data encoding (default 'utf8').
# - base64: data must be base64 encoded text. Its binary
# decoding gets written.
-# Bug: invalid base64 is currently not rejected.
-# Whitespace *is* invalid.
# - utf8: data's UTF-8 encoding is written
# - data itself is always Unicode regardless of format, like
# any other string.
#
# @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1)
#
+# @postcopy-requests: The number of page requests received from the destination
+# (since 2.7)
+#
# Since: 0.14.0
##
{ 'struct': 'MigrationStats',
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
- 'mbps' : 'number', 'dirty-sync-count' : 'int' } }
+ 'mbps' : 'number', 'dirty-sync-count' : 'int',
+ 'postcopy-requests' : 'int' } }
##
# @XBZRLECacheStats
# may be expensive, but do not actually occur during the iterative
# migration rounds themselves. (since 1.6)
#
-# @x-cpu-throttle-percentage: #optional percentage of time guest cpus are being
-# throttled during auto-converge. This is only present when auto-converge
-# has started throttling guest cpus. (Since 2.5)
+# @cpu-throttle-percentage: #optional percentage of time guest cpus are being
+# throttled during auto-converge. This is only present when auto-converge
+# has started throttling guest cpus. (Since 2.7)
+#
+# @error-desc: #optional the human readable error description string, when
+# @status is 'failed'. Clients should not attempt to parse the
+# error strings. (Since 2.7)
#
# Since: 0.14.0
##
'*expected-downtime': 'int',
'*downtime': 'int',
'*setup-time': 'int',
- '*x-cpu-throttle-percentage': 'int'} }
+ '*cpu-throttle-percentage': 'int',
+ '*error-desc': 'str'} }
##
# @query-migrate
# @auto-converge: If enabled, QEMU will automatically throttle down the guest
# to speed up convergence of RAM migration. (since 1.6)
#
-# @x-postcopy-ram: Start executing on the migration target before all of RAM has
+# @postcopy-ram: Start executing on the migration target before all of RAM has
# been migrated, pulling the remaining pages along as needed. NOTE: If
-# the migration fails during postcopy the VM will fail. (since 2.5)
+# the migration fails during postcopy the VM will fail. (since 2.6)
#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
- 'compress', 'events', 'x-postcopy-ram'] }
+ 'compress', 'events', 'postcopy-ram'] }
##
# @MigrationCapabilityStatus
# compression, so set the decompress-threads to the number about 1/4
# of compress-threads is adequate.
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
'data': ['compress-level', 'compress-threads', 'decompress-threads',
- 'x-cpu-throttle-initial', 'x-cpu-throttle-increment'] }
+ 'cpu-throttle-initial', 'cpu-throttle-increment',
+ 'tls-creds', 'tls-hostname'] }
#
# @migrate-set-parameters
#
# @decompress-threads: decompression thread count
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'command': 'migrate-set-parameters',
'data': { '*compress-level': 'int',
'*compress-threads': 'int',
'*decompress-threads': 'int',
- '*x-cpu-throttle-initial': 'int',
- '*x-cpu-throttle-increment': 'int'} }
+ '*cpu-throttle-initial': 'int',
+ '*cpu-throttle-increment': 'int',
+ '*tls-creds': 'str',
+ '*tls-hostname': 'str'} }
#
# @MigrationParameters
#
# @decompress-threads: decompression thread count
#
-# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
-# when migration auto-converge is activated. The
-# default value is 20. (Since 2.5)
-#
-# @x-cpu-throttle-increment: throttle percentage increase each time
-# auto-converge detects that migration is not making
-# progress. The default value is 10. (Since 2.5)
+# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.7)
+#
+# @cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.7)
+#
+# @tls-creds: ID of the 'tls-creds' object that provides credentials for
+# establishing a TLS connection over the migration data channel.
+# On the outgoing side of the migration, the credentials must
+# be for a 'client' endpoint, while for the incoming side the
+# credentials must be for a 'server' endpoint. Setting this
+# will enable TLS for all migrations. The default is unset,
+# resulting in unsecured migration at the QEMU level. (Since 2.7)
+#
+# @tls-hostname: hostname of the target host for the migration. This is
+# required when using x509 based TLS credentials and the
+# migration URI does not already include a hostname. For
+# example if using fd: or exec: based migration, the
+# hostname must be provided so that the server's x509
+# certificate identity can be validated. (Since 2.7)
#
# Since: 2.4
##
'data': { 'compress-level': 'int',
'compress-threads': 'int',
'decompress-threads': 'int',
- 'x-cpu-throttle-initial': 'int',
- 'x-cpu-throttle-increment': 'int'} }
+ 'cpu-throttle-initial': 'int',
+ 'cpu-throttle-increment': 'int',
+ 'tls-creds': 'str',
+ 'tls-hostname': 'str'} }
##
# @query-migrate-parameters
#
# @migrate-start-postcopy
#
# Followup to a migration command to switch the migration to postcopy mode.
-# The x-postcopy-ram capability must be set before the original migration
+# The postcopy-ram capability must be set before the original migration
# command.
#
# Since: 2.5
'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 'other' ] }
##
-# @CpuInfoBase:
+# @CpuInfo:
#
-# Common information about a virtual CPU
+# Information about a virtual CPU
#
# @CPU: the index of the virtual CPU
#
# Notes: @halted is a transient state that changes frequently. By the time the
# data is sent to the client, the guest may no longer be halted.
##
-{ 'struct': 'CpuInfoBase',
- 'data': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
- 'qom_path': 'str', 'thread_id': 'int', 'arch': 'CpuInfoArch' } }
-
-##
-# @CpuInfo:
-#
-# Information about a virtual CPU
-#
-# Since: 0.14.0
-##
-{ 'union': 'CpuInfo', 'base': 'CpuInfoBase', 'discriminator': 'arch',
+{ 'union': 'CpuInfo',
+ 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
+ 'qom_path': 'str', 'thread_id': 'int', 'arch': 'CpuInfoArch' },
+ 'discriminator': 'arch',
'data': { 'x86': 'CpuInfoX86',
'sparc': 'CpuInfoSPARC',
'ppc': 'CpuInfoPPC',
# @dump-guest-memory
#
# Dump guest's memory to vmcore. It is a synchronous operation that can take
-# very long depending on the amount of guest memory. This command is only
-# supported on i386 and x86_64.
+# very long depending on the amount of guest memory.
#
# @paging: if true, do paging to get guest's memory mapping. This allows
# using gdb to process the core file.
# 2. The guest can be in real-mode even if paging is enabled. For
# example, the guest uses ACPI to sleep, and ACPI sleep state
# goes in real-mode
+# 3. Currently only supported on i386 and x86_64.
#
# @protocol: the filename or file descriptor of the vmcore. The supported
# protocols are:
# 2. fd: the protocol starts with "fd:", and the following string
# is the fd's name.
#
+# @detach: #optional if true, QMP will return immediately rather than
+# waiting for the dump to finish. The user can track progress
+# using "query-dump". (since 2.6).
+#
# @begin: #optional if specified, the starting physical address.
#
# @length: #optional if specified, the memory size, in bytes. If you don't
# Since: 1.2
##
{ 'command': 'dump-guest-memory',
- 'data': { 'paging': 'bool', 'protocol': 'str', '*begin': 'int',
- '*length': 'int', '*format': 'DumpGuestMemoryFormat' } }
+ 'data': { 'paging': 'bool', 'protocol': 'str', '*detach': 'bool',
+ '*begin': 'int', '*length': 'int',
+ '*format': 'DumpGuestMemoryFormat'} }
+
+##
+# @DumpStatus
+#
+# Describe the status of a long-running background guest memory dump.
+#
+# @none: no dump-guest-memory has started yet.
+#
+# @active: there is one dump running in background.
+#
+# @completed: the last dump has finished successfully.
+#
+# @failed: the last dump has failed.
+#
+# Since 2.6
+##
+{ 'enum': 'DumpStatus',
+ 'data': [ 'none', 'active', 'completed', 'failed' ] }
+
+##
+# @DumpQueryResult
+#
+# The result format for 'query-dump'.
+#
+# @status: enum of @DumpStatus, which shows current dump status
+#
+# @completed: bytes written in latest dump (uncompressed)
+#
+# @total: total bytes to be written in latest dump (uncompressed)
+#
+# Since 2.6
+##
+{ 'struct': 'DumpQueryResult',
+ 'data': { 'status': 'DumpStatus',
+ 'completed': 'int',
+ 'total': 'int' } }
+
+##
+# @query-dump
+#
+# Query latest dump status.
+#
+# Returns: A @DumpStatus object showing the dump status.
+#
+# Since: 2.6
+##
+{ 'command': 'query-dump', 'returns': 'DumpQueryResult' }
##
# @DumpGuestMemoryCapability:
#
# @restrict: #optional isolate the guest from the host
#
+# @ipv4: #optional whether to support IPv4, default true for enabled
+# (since 2.6)
+#
+# @ipv6: #optional whether to support IPv6, default true for enabled
+# (since 2.6)
+#
# @ip: #optional legacy parameter, use net= instead
#
-# @net: #optional IP address and optional netmask
+# @net: #optional IP network address that the guest will see, in the
+# form addr[/netmask] The netmask is optional, and can be
+# either in the form a.b.c.d or as a number of valid top-most
+# bits. Default is 10.0.2.0/24.
#
# @host: #optional guest-visible address of the host
#
# @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option
# to the guest
#
+# @ipv6-prefix: #optional IPv6 network prefix (default is fec0::) (since
+# 2.6). The network prefix is given in the usual
+# hexadecimal IPv6 address notation.
+#
+# @ipv6-prefixlen: #optional IPv6 network prefix length (default is 64)
+# (since 2.6)
+#
+# @ipv6-host: #optional guest-visible IPv6 address of the host (since 2.6)
+#
+# @ipv6-dns: #optional guest-visible IPv6 address of the virtual
+# nameserver (since 2.6)
+#
# @smb: #optional root directory of the built-in SMB server
#
# @smbserver: #optional IP address of the built-in SMB server
'data': {
'*hostname': 'str',
'*restrict': 'bool',
+ '*ipv4': 'bool',
+ '*ipv6': 'bool',
'*ip': 'str',
'*net': 'str',
'*host': 'str',
'*dhcpstart': 'str',
'*dns': 'str',
'*dnssearch': ['String'],
+ '*ipv6-prefix': 'str',
+ '*ipv6-prefixlen': 'int',
+ '*ipv6-host': 'str',
+ '*ipv6-dns': 'str',
'*smb': 'str',
'*smbserver': 'str',
'*hostfwd': ['String'],
#
# @queues: #optional number of queues to be created for multiqueue capable tap
#
+# @poll-us: #optional maximum number of microseconds that could
+# be spent on busy polling for tap (since 2.7)
+#
# Since 1.2
##
{ 'struct': 'NetdevTapOptions',
'*vhostfd': 'str',
'*vhostfds': 'str',
'*vhostforce': 'bool',
- '*queues': 'uint32'} }
+ '*queues': 'uint32',
+ '*poll-us': 'uint32'} }
##
# @NetdevSocketOptions
'*queues': 'int' } }
##
-# @NetClientOptions
+# @NetClientDriver
+#
+# Available netdev drivers.
+#
+# Since 2.7
+##
+{ 'enum': 'NetClientDriver',
+ 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde', 'dump',
+ 'bridge', 'hubport', 'netmap', 'vhost-user' ] }
+
+##
+# @Netdev
#
-# A discriminated record of network device traits.
+# Captures the configuration of a network device.
+#
+# @id: identifier for monitor commands.
+#
+# @type: Specify the driver used for interpreting remaining arguments.
#
# Since 1.2
#
# 'l2tpv3' - since 2.1
-#
##
-{ 'union': 'NetClientOptions',
+{ 'union': 'Netdev',
+ 'base': { 'id': 'str', 'type': 'NetClientDriver' },
+ 'discriminator': 'type',
'data': {
'none': 'NetdevNoneOptions',
'nic': 'NetLegacyNicOptions',
'*vlan': 'int32',
'*id': 'str',
'*name': 'str',
- 'opts': 'NetClientOptions' } }
+ 'opts': 'NetLegacyOptions' } }
##
-# @Netdev
+# @NetLegacyOptions
#
-# Captures the configuration of a network device.
-#
-# @id: identifier for monitor commands.
-#
-# @opts: device type specific properties
+# Like Netdev, but for use only by the legacy command line options
#
# Since 1.2
##
-{ 'struct': 'Netdev',
+{ 'union': 'NetLegacyOptions',
'data': {
- 'id': 'str',
- 'opts': 'NetClientOptions' } }
+ 'none': 'NetdevNoneOptions',
+ 'nic': 'NetLegacyNicOptions',
+ 'user': 'NetdevUserOptions',
+ 'tap': 'NetdevTapOptions',
+ 'l2tpv3': 'NetdevL2TPv3Options',
+ 'socket': 'NetdevSocketOptions',
+ 'vde': 'NetdevVdeOptions',
+ 'dump': 'NetdevDumpOptions',
+ 'bridge': 'NetdevBridgeOptions',
+ 'netmap': 'NetdevNetmapOptions',
+ 'vhost-user': 'NetdevVhostUserOptions' } }
##
# @NetFilterDirection
# @cpu-max: maximum number of CPUs supported by the machine type
# (since 1.5.0)
#
+# @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0)
+#
# Since: 1.2.0
##
{ 'struct': 'MachineInfo',
'data': { 'name': 'str', '*alias': 'str',
- '*is-default': 'bool', 'cpu-max': 'int' } }
+ '*is-default': 'bool', 'cpu-max': 'int',
+ 'hotpluggable-cpus': 'bool'} }
##
# @query-machines:
#
# 'unmapped' and 'pause' since 2.0
# 'ro' and 'kp_comma' since 2.4
+# 'kp_equals' and 'power' since 2.6
##
{ 'enum': 'QKeyCode',
'data': [ 'unmapped',
'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 'ro',
- 'kp_comma' ] }
+ 'kp_comma', 'kp_equals', 'power' ] }
##
# @KeyValue
##
{ 'command': 'screendump', 'data': {'filename': 'str'} }
+
+##
+# @ChardevCommon:
+#
+# Configuration shared across all chardev backends
+#
+# @logfile: #optional The name of a logfile to save output
+# @logappend: #optional true to append instead of truncate
+# (default to false to truncate)
+#
+# Since: 2.6
+##
+{ 'struct': 'ChardevCommon', 'data': { '*logfile': 'str',
+ '*logappend': 'bool' } }
+
##
# @ChardevFile:
#
##
{ 'struct': 'ChardevFile', 'data': { '*in' : 'str',
'out' : 'str',
- '*append': 'bool' } }
+ '*append': 'bool' },
+ 'base': 'ChardevCommon' }
##
# @ChardevHostdev:
#
# Since: 1.4
##
-{ 'struct': 'ChardevHostdev', 'data': { 'device' : 'str' } }
+{ 'struct': 'ChardevHostdev', 'data': { 'device' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevSocket:
#
# @addr: socket address to listen on (server=true)
# or connect to (server=false)
+# @tls-creds: #optional the ID of the TLS credentials object (since 2.6)
# @server: #optional create server socket (default: true)
# @wait: #optional wait for incoming connection on server
# sockets (default: false).
# Since: 1.4
##
{ 'struct': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress',
+ '*tls-creds' : 'str',
'*server' : 'bool',
'*wait' : 'bool',
'*nodelay' : 'bool',
'*telnet' : 'bool',
- '*reconnect' : 'int' } }
+ '*reconnect' : 'int' },
+ 'base': 'ChardevCommon' }
##
# @ChardevUdp:
# Since: 1.5
##
{ 'struct': 'ChardevUdp', 'data': { 'remote' : 'SocketAddress',
- '*local' : 'SocketAddress' } }
+ '*local' : 'SocketAddress' },
+ 'base': 'ChardevCommon' }
##
# @ChardevMux:
#
# Since: 1.5
##
-{ 'struct': 'ChardevMux', 'data': { 'chardev' : 'str' } }
+{ 'struct': 'ChardevMux', 'data': { 'chardev' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevStdio:
#
# Since: 1.5
##
-{ 'struct': 'ChardevStdio', 'data': { '*signal' : 'bool' } }
+{ 'struct': 'ChardevStdio', 'data': { '*signal' : 'bool' },
+ 'base': 'ChardevCommon' }
+
##
# @ChardevSpiceChannel:
#
# Since: 1.5
##
-{ 'struct': 'ChardevSpiceChannel', 'data': { 'type' : 'str' } }
+{ 'struct': 'ChardevSpiceChannel', 'data': { 'type' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevSpicePort:
#
# Since: 1.5
##
-{ 'struct': 'ChardevSpicePort', 'data': { 'fqdn' : 'str' } }
+{ 'struct': 'ChardevSpicePort', 'data': { 'fqdn' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevVC:
{ 'struct': 'ChardevVC', 'data': { '*width' : 'int',
'*height' : 'int',
'*cols' : 'int',
- '*rows' : 'int' } }
+ '*rows' : 'int' },
+ 'base': 'ChardevCommon' }
##
# @ChardevRingbuf:
#
# Since: 1.5
##
-{ 'struct': 'ChardevRingbuf', 'data': { '*size' : 'int' } }
+{ 'struct': 'ChardevRingbuf', 'data': { '*size' : 'int' },
+ 'base': 'ChardevCommon' }
##
# @ChardevBackend:
#
# Since: 1.4 (testdev since 2.2)
##
-{ 'struct': 'ChardevDummy', 'data': { } }
-
{ 'union': 'ChardevBackend', 'data': { 'file' : 'ChardevFile',
'serial' : 'ChardevHostdev',
'parallel': 'ChardevHostdev',
'pipe' : 'ChardevHostdev',
'socket' : 'ChardevSocket',
'udp' : 'ChardevUdp',
- 'pty' : 'ChardevDummy',
- 'null' : 'ChardevDummy',
+ 'pty' : 'ChardevCommon',
+ 'null' : 'ChardevCommon',
'mux' : 'ChardevMux',
- 'msmouse': 'ChardevDummy',
- 'braille': 'ChardevDummy',
- 'testdev': 'ChardevDummy',
+ 'msmouse': 'ChardevCommon',
+ 'braille': 'ChardevCommon',
+ 'testdev': 'ChardevCommon',
'stdio' : 'ChardevStdio',
- 'console': 'ChardevDummy',
+ 'console': 'ChardevCommon',
'spicevmc' : 'ChardevSpiceChannel',
'spiceport' : 'ChardevSpicePort',
'vc' : 'ChardevVC',
# Button of a pointer input device (mouse, tablet).
#
# Since: 2.0
-#
-# Note that the spelling of these values may change when the
-# x-input-send-event is promoted out of experimental status.
##
{ 'enum' : 'InputButton',
- 'data' : [ 'Left', 'Middle', 'Right', 'WheelUp', 'WheelDown' ] }
+ 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down' ] }
##
# @InputAxis
# Position axis of a pointer input device (mouse, tablet).
#
# Since: 2.0
-#
-# Note that the spelling of these values may change when the
-# x-input-send-event is promoted out of experimental status.
##
{ 'enum' : 'InputAxis',
- 'data' : [ 'X', 'Y' ] }
+ 'data' : [ 'x', 'y' ] }
##
# @InputKeyEvent
'abs' : 'InputMoveEvent' } }
##
-# @x-input-send-event
+# @input-send-event
#
# Send input event(s) to guest.
#
-# @console: #optional console to send event(s) to.
-# This parameter can be used to send the input event to
-# specific input devices in case (a) multiple input devices
-# of the same kind are added to the virtual machine and (b)
-# you have configured input routing (see docs/multiseat.txt)
-# for those input devices. If input routing is not
-# configured this parameter has no effect.
-# If @console is missing, only devices that aren't associated
-# with a console are admissible.
-# If @console is specified, it must exist, and both devices
-# associated with that console and devices not associated with a
-# console are admissible, but the former take precedence.
-
-#
+# @device: #optional display device to send event(s) to.
+# @head: #optional head to send event(s) to, in case the
+# display device supports multiple scanouts.
# @events: List of InputEvent union.
#
# Returns: Nothing on success.
#
-# Since: 2.2
-#
-# Note: this command is experimental, and not a stable API. Things that
-# might change before it becomes stable include the spelling of enum
-# values for InputButton and InputAxis, and the notion of how to designate
-# which console will receive the event.
+# The @display and @head parameters can be used to send the input
+# event to specific input devices in case (a) multiple input devices
+# of the same kind are added to the virtual machine and (b) you have
+# configured input routing (see docs/multiseat.txt) for those input
+# devices. The parameters work exactly like the device and head
+# properties of input devices. If @device is missing, only devices
+# that have no input routing config are admissible. If @device is
+# specified, both input devices with and without input routing config
+# are admissible, but devices with input routing config take
+# precedence.
#
+# Since: 2.6
##
-{ 'command': 'x-input-send-event',
- 'data': { '*console':'int', 'events': [ 'InputEvent' ] } }
+{ 'command': 'input-send-event',
+ 'data': { '*device': 'str',
+ '*head' : 'int',
+ 'events' : [ 'InputEvent' ] } }
##
# @NumaOptions
## @ACPISlotType
#
# @DIMM: memory slot
+# @CPU: logical CPU slot (since 2.7)
#
-{ 'enum': 'ACPISlotType', 'data': [ 'DIMM' ] }
+{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
## @ACPIOSTInfo
#
##
{ 'enum': 'ReplayMode',
'data': [ 'none', 'record', 'play' ] }
+
+##
+# @xen-load-devices-state:
+#
+# Load the state of all devices from file. The RAM and the block devices
+# of the VM are not loaded by this command.
+#
+# @filename: the file to load the state of the devices from as binary
+# data. See xen-save-devices-state.txt for a description of the binary
+# format.
+#
+# Since: 2.7
+##
+{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
+
+##
+# @GICCapability:
+#
+# The struct describes capability for a specific GIC (Generic
+# Interrupt Controller) version. These bits are not only decided by
+# QEMU/KVM software version, but also decided by the hardware that
+# the program is running upon.
+#
+# @version: version of GIC to be described. Currently, only 2 and 3
+# are supported.
+#
+# @emulated: whether current QEMU/hardware supports emulated GIC
+# device in user space.
+#
+# @kernel: whether current QEMU/hardware supports hardware
+# accelerated GIC device in kernel.
+#
+# Since: 2.6
+##
+{ 'struct': 'GICCapability',
+ 'data': { 'version': 'int',
+ 'emulated': 'bool',
+ 'kernel': 'bool' } }
+
+##
+# @query-gic-capabilities:
+#
+# This command is ARM-only. It will return a list of GICCapability
+# objects that describe its capability bits.
+#
+# Returns: a list of GICCapability objects.
+#
+# Since: 2.6
+##
+{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
+
+##
+# CpuInstanceProperties
+#
+# List of properties to be used for hotplugging a CPU instance,
+# it should be passed by management with device_add command when
+# a CPU is being hotplugged.
+#
+# Note: currently there are 4 properties that could be present
+# but management should be prepared to pass through other
+# properties with device_add command to allow for future
+# interface extension. This also requires the filed names to be kept in
+# sync with the properties passed to -device/device_add.
+#
+# @node-id: #optional NUMA node ID the CPU belongs to
+# @socket-id: #optional socket number within node/board the CPU belongs to
+# @core-id: #optional core number within socket the CPU belongs to
+# @thread-id: #optional thread number within core the CPU belongs to
+#
+# Since: 2.7
+##
+{ 'struct': 'CpuInstanceProperties',
+ 'data': { '*node-id': 'int',
+ '*socket-id': 'int',
+ '*core-id': 'int',
+ '*thread-id': 'int'
+ }
+}
+
+##
+# @HotpluggableCPU
+#
+# @type: CPU object type for usage with device_add command
+# @props: list of properties to be used for hotplugging CPU
+# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides
+# @qom-path: #optional link to existing CPU object if CPU is present or
+# omitted if CPU is not present.
+#
+# Since: 2.7
+##
+{ 'struct': 'HotpluggableCPU',
+ 'data': { 'type': 'str',
+ 'vcpus-count': 'int',
+ 'props': 'CpuInstanceProperties',
+ '*qom-path': 'str'
+ }
+}
+
+##
+# @query-hotpluggable-cpus
+#
+# Returns: a list of HotpluggableCPU objects.
+#
+# Since: 2.7
+##
+{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] }
projects / mirror_qemu.git / blobdiff