# QAPI block definitions
{ 'include': 'qapi/block.json' }
+# QAPI event definitions
+{ 'include': 'qapi/event.json' }
+
##
# LostTickPolicy:
#
#
# @filename: the filename of the character device
#
+# @frontend-open: shows whether the frontend device attached to this backend
+# (eg. with the chardev=... option) is in open or closed state
+# (since 2.1)
+#
# Notes: @filename is encoded using the QEMU command line character device
# encoding. See the QEMU man page for details.
#
# Since: 0.14.0
##
-{ 'type': 'ChardevInfo', 'data': {'label': 'str', 'filename': 'str'} }
+{ 'type': 'ChardevInfo', 'data': {'label': 'str',
+ 'filename': 'str',
+ 'frontend-open': 'bool'} }
##
# @query-chardev:
{ 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] }
##
-# @VncClientInfo:
+# @NetworkAddressFamily
#
-# Information about a connected VNC client.
+# The network address family
+#
+# @ipv4: IPV4 family
+#
+# @ipv6: IPV6 family
+#
+# @unix: unix socket
+#
+# @unknown: otherwise
+#
+# Since: 2.1
+##
+{ 'enum': 'NetworkAddressFamily',
+ 'data': [ 'ipv4', 'ipv6', 'unix', 'unknown' ] }
+
+##
+# @VncBasicInfo
+#
+# The basic information for vnc network connection
#
-# @host: The host name of the client. QEMU tries to resolve this to a DNS name
-# when possible.
+# @host: IP address
#
-# @family: 'ipv6' if the client is connected via IPv6 and TCP
-# 'ipv4' if the client is connected via IPv4 and TCP
-# 'unix' if the client is connected via a unix domain socket
-# 'unknown' otherwise
+# @service: The service name of the vnc port. This may depend on the host
+# system's service database so symbolic names should not be relied
+# on.
#
-# @service: The service name of the client's port. This may depends on the
-# host system's service database so symbolic names should not be
-# relied on.
+# @family: address family
+#
+# Since: 2.1
+##
+{ 'type': 'VncBasicInfo',
+ 'data': { 'host': 'str',
+ 'service': 'str',
+ 'family': 'NetworkAddressFamily' } }
+
+##
+# @VncServerInfo
+#
+# The network connection information for server
+#
+# @auth: #optional, authentication method
+#
+# Since: 2.1
+##
+{ 'type': 'VncServerInfo',
+ 'base': 'VncBasicInfo',
+ 'data': { '*auth': 'str' } }
+
+##
+# @VncClientInfo:
+#
+# Information about a connected VNC client.
#
# @x509_dname: #optional If x509 authentication is in use, the Distinguished
# Name of the client.
# Since: 0.14.0
##
{ 'type': 'VncClientInfo',
- 'data': {'host': 'str', 'family': 'str', 'service': 'str',
- '*x509_dname': 'str', '*sasl_username': 'str'} }
+ 'base': 'VncBasicInfo',
+ 'data': { '*x509_dname': 'str', '*sasl_username': 'str' } }
##
# @VncInfo:
# Since: 0.14.0
##
{ 'type': 'VncInfo',
- 'data': {'enabled': 'bool', '*host': 'str', '*family': 'str',
+ 'data': {'enabled': 'bool', '*host': 'str',
+ '*family': 'NetworkAddressFamily',
'*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }
##
{ 'command': 'query-vnc', 'returns': 'VncInfo' }
##
-# @SpiceChannel
+# @SpiceBasicInfo
#
-# Information about a SPICE client channel.
+# The basic information for SPICE network connection
+#
+# @host: IP address
+#
+# @port: port number
+#
+# @family: address family
+#
+# Since: 2.1
+##
+{ 'type': 'SpiceBasicInfo',
+ 'data': { 'host': 'str',
+ 'port': 'str',
+ 'family': 'NetworkAddressFamily' } }
+
+##
+# @SpiceServerInfo
+#
+# Information about a SPICE server
#
-# @host: The host name of the client. QEMU tries to resolve this to a DNS name
-# when possible.
+# @auth: #optional, authentication method
#
-# @family: 'ipv6' if the client is connected via IPv6 and TCP
-# 'ipv4' if the client is connected via IPv4 and TCP
-# 'unix' if the client is connected via a unix domain socket
-# 'unknown' otherwise
+# Since: 2.1
+##
+{ 'type': 'SpiceServerInfo',
+ 'base': 'SpiceBasicInfo',
+ 'data': { '*auth': 'str' } }
+
+##
+# @SpiceChannel
#
-# @port: The client's port number.
+# Information about a SPICE client channel.
#
# @connection-id: SPICE connection id number. All channels with the same id
# belong to the same SPICE session.
# Since: 0.14.0
##
{ 'type': 'SpiceChannel',
- 'data': {'host': 'str', 'family': 'str', 'port': 'str',
- 'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
+ 'base': 'SpiceBasicInfo',
+ 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
'tls': 'bool'} }
##
##
# @inject-nmi:
#
-# Injects an Non-Maskable Interrupt into all guest's VCPUs.
+# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64).
#
# Returns: If successful, nothing
#
# Since: 0.14.0
#
-# Notes: Only x86 Virtual Machines support this command.
+# Note: prior to 2.1, this command was only supported for x86 and s390 VMs
##
{ 'command': 'inject-nmi' }
'*localaddr': 'str',
'*udp': 'str' } }
+##
+# @NetdevL2TPv3Options
+#
+# Connect the VLAN to Ethernet over L2TPv3 Static tunnel
+#
+# @src: source address
+#
+# @dst: destination address
+#
+# @srcport: #optional source port - mandatory for udp, optional for ip
+#
+# @dstport: #optional destination port - mandatory for udp, optional for ip
+#
+# @ipv6: #optional - force the use of ipv6
+#
+# @udp: #optional - use the udp version of l2tpv3 encapsulation
+#
+# @cookie64: #optional - use 64 bit coookies
+#
+# @counter: #optional have sequence counter
+#
+# @pincounter: #optional pin sequence counter to zero -
+# workaround for buggy implementations or
+# networks with packet reorder
+#
+# @txcookie: #optional 32 or 64 bit transmit cookie
+#
+# @rxcookie: #optional 32 or 64 bit receive cookie
+#
+# @txsession: 32 bit transmit session
+#
+# @rxsession: #optional 32 bit receive session - if not specified
+# set to the same value as transmit
+#
+# @offset: #optional additional offset - allows the insertion of
+# additional application-specific data before the packet payload
+#
+# Since 2.1
+##
+{ 'type': 'NetdevL2TPv3Options',
+ 'data': {
+ 'src': 'str',
+ 'dst': 'str',
+ '*srcport': 'str',
+ '*dstport': 'str',
+ '*ipv6': 'bool',
+ '*udp': 'bool',
+ '*cookie64': 'bool',
+ '*counter': 'bool',
+ '*pincounter': 'bool',
+ '*txcookie': 'uint64',
+ '*rxcookie': 'uint64',
+ 'txsession': 'uint32',
+ '*rxsession': 'uint32',
+ '*offset': 'uint32' } }
+
##
# @NetdevVdeOptions
#
# A discriminated record of network device traits.
#
# Since 1.2
+#
+# 'l2tpv3' - since 2.1
+#
##
{ 'union': 'NetClientOptions',
'data': {
'nic': 'NetLegacyNicOptions',
'user': 'NetdevUserOptions',
'tap': 'NetdevTapOptions',
+ 'l2tpv3': 'NetdevL2TPv3Options',
'socket': 'NetdevSocketOptions',
'vde': 'NetdevVdeOptions',
'dump': 'NetdevDumpOptions',
#
# Configuration info for the new chardev backend.
#
-# Since: 1.4
+# Since: 1.4 (testdev since 2.2)
##
{ 'type': 'ChardevDummy', 'data': { } }
'mux' : 'ChardevMux',
'msmouse': 'ChardevDummy',
'braille': 'ChardevDummy',
+ 'testdev': 'ChardevDummy',
'stdio' : 'ChardevStdio',
'console': 'ChardevDummy',
'spicevmc' : 'ChardevSpiceChannel',
##
# @Memdev:
#
-# Information of memory device
+# Information about memory backend
#
-# @size: memory device size
+# @size: memory backend size
#
# @merge: enables or disables memory merge support
#
-# @dump: includes memory device's memory in a core dump or not
+# @dump: includes memory backend's memory in a core dump or not
#
# @prealloc: enables or disables memory preallocation
#
# @host-nodes: host nodes for its memory policy
#
-# @policy: memory policy of memory device
+# @policy: memory policy of memory backend
#
# Since: 2.1
##
##
# @query-memdev:
#
-# Returns information for all memory devices.
+# Returns information for all memory backends.
#
# Returns: a list of @Memdev.
#
# Since: 2.1
##
{ 'command': 'query-memdev', 'returns': ['Memdev'] }
+
+##
# @PCDIMMDeviceInfo:
#
# PCDIMMDevice state information
# Since: 2.1
##
{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
+
+##
+# @WatchdogExpirationAction
+#
+# An enumeration of the actions taken when the watchdog device's timer is
+# expired
+#
+# @reset: system resets
+#
+# @shutdown: system shutdown, note that it is similar to @powerdown, which
+# tries to set to system status and notify guest
+#
+# @poweroff: system poweroff, the emulator program exits
+#
+# @pause: system pauses, similar to @stop
+#
+# @debug: system enters debug state
+#
+# @none: nothing is done
+#
+# Since: 2.1
+##
+{ 'enum': 'WatchdogExpirationAction',
+ 'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none' ] }
+
+##
+# @IoOperationType
+#
+# An enumeration of the I/O operation types
+#
+# @read: read operation
+#
+# @write: write operation
+#
+# Since: 2.1
+##
+{ 'enum': 'IoOperationType',
+ 'data': [ 'read', 'write' ] }
+
+##
+# @GuestPanicAction
+#
+# An enumeration of the actions taken when guest OS panic is detected
+#
+# @pause: system pauses
+#
+# Since: 2.1
+##
+{ 'enum': 'GuestPanicAction',
+ 'data': [ 'pause' ] }
+
+##
+# @rtc-reset-reinjection
+#
+# This command will reset the RTC interrupt reinjection backlog.
+# Can be used if another mechanism to synchronize guest time
+# is in effect, for example QEMU guest agent's guest-set-time
+# command.
+#
+# Since: 2.1
+##
+{ 'command': 'rtc-reset-reinjection' }
projects / mirror_qemu.git / blobdiff