# QAPI event definitions
{ 'include': 'qapi/event.json' }
+# Tracing commands
+{ 'include': 'qapi/trace.json' }
+
##
# LostTickPolicy:
#
#
# @filename: the filename of the character device
#
+# @frontend-open: shows whether the frontend device attached to this backend
+# (eg. with the chardev=... option) is in open or closed state
+# (since 2.1)
+#
# Notes: @filename is encoded using the QEMU command line character device
# encoding. See the QEMU man page for details.
#
# Since: 0.14.0
##
-{ 'type': 'ChardevInfo', 'data': {'label': 'str', 'filename': 'str'} }
+{ 'type': 'ChardevInfo', 'data': {'label': 'str',
+ 'filename': 'str',
+ 'frontend-open': 'bool'} }
##
# @query-chardev:
'cache-miss': 'int', 'cache-miss-rate': 'number',
'overflow': 'int' } }
+# @MigrationStatus:
+#
+# An enumeration of migration status.
+#
+# @none: no migration has ever happened.
+#
+# @setup: migration process has been initiated.
+#
+# @cancelling: in the process of cancelling migration.
+#
+# @cancelled: cancelling migration is finished.
+#
+# @active: in the process of doing migration.
+#
+# @completed: migration is finished.
+#
+# @failed: some error occurred during migration process.
+#
+# Since: 2.3
+#
+##
+{ 'enum': 'MigrationStatus',
+ 'data': [ 'none', 'setup', 'cancelling', 'cancelled',
+ 'active', 'completed', 'failed' ] }
+
##
# @MigrationInfo
#
# Information about current migration process.
#
-# @status: #optional string describing the current migration status.
-# As of 0.14.0 this can be 'setup', 'active', 'completed', 'failed' or
-# 'cancelled'. If this field is not returned, no migration process
+# @status: #optional @MigrationStatus describing the current migration status.
+# If this field is not returned, no migration process
# has been initiated
#
# @ram: #optional @MigrationStats containing detailed migration
# status, only returned if status is 'active' or
-# 'completed'. 'comppleted' (since 1.2)
+# 'completed'(since 1.2)
#
# @disk: #optional @MigrationStats containing detailed disk migration
# status, only returned if status is 'active' and it is a block
# Since: 0.14.0
##
{ 'type': 'MigrationInfo',
- 'data': {'*status': 'str', '*ram': 'MigrationStats',
+ 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats',
'*disk': 'MigrationStats',
'*xbzrle-cache': 'XBZRLECacheStats',
'*total-time': 'int',
#
# @host: IP address
#
-# @service: The service name of vnc port. This may depend on the host system's
-# service database so symbolic names should not be relied on.
+# @service: The service name of the vnc port. This may depend on the host
+# system's service database so symbolic names should not be relied
+# on.
#
# @family: address family
#
+# @websocket: true in case the socket is a websocket (since 2.3).
+#
# Since: 2.1
##
{ 'type': 'VncBasicInfo',
'data': { 'host': 'str',
'service': 'str',
- 'family': 'NetworkAddressFamily' } }
+ 'family': 'NetworkAddressFamily',
+ 'websocket': 'bool' } }
##
# @VncServerInfo
##
{ 'type': 'VncClientInfo',
'base': 'VncBasicInfo',
- 'data': { '*x509_dname' : 'str', '*sasl_username': 'str' } }
+ 'data': { '*x509_dname': 'str', '*sasl_username': 'str' } }
##
# @VncInfo:
'*family': 'NetworkAddressFamily',
'*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }
+##
+# @VncPriAuth:
+#
+# vnc primary authentication method.
+#
+# Since: 2.3
+##
+{ 'enum': 'VncPrimaryAuth',
+ 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
+ 'tls', 'vencrypt', 'sasl' ] }
+
+##
+# @VncVencryptSubAuth:
+#
+# vnc sub authentication method with vencrypt.
+#
+# Since: 2.3
+##
+{ 'enum': 'VncVencryptSubAuth',
+ 'data': [ 'plain',
+ 'tls-none', 'x509-none',
+ 'tls-vnc', 'x509-vnc',
+ 'tls-plain', 'x509-plain',
+ 'tls-sasl', 'x509-sasl' ] }
+
+##
+# @VncInfo2:
+#
+# Information about a vnc server
+#
+# @id: vnc server name.
+#
+# @server: A list of @VncBasincInfo describing all listening sockets.
+# The list can be empty (in case the vnc server is disabled).
+# It also may have multiple entries: normal + websocket,
+# possibly also ipv4 + ipv6 in the future.
+#
+# @clients: A list of @VncClientInfo of all currently connected clients.
+# The list can be empty, for obvious reasons.
+#
+# @auth: The current authentication type used by the server
+#
+# @vencrypt: #optional The vencrypt sub authentication type used by the server,
+# only specified in case auth == vencrypt.
+#
+# @display: #optional The display device the vnc server is linked to.
+#
+# Since: 2.3
+##
+{ 'type': 'VncInfo2',
+ 'data': { 'id' : 'str',
+ 'server' : ['VncBasicInfo'],
+ 'clients' : ['VncClientInfo'],
+ 'auth' : 'VncPrimaryAuth',
+ '*vencrypt' : 'VncVencryptSubAuth',
+ '*display' : 'str' } }
+
##
# @query-vnc:
#
##
{ 'command': 'query-vnc', 'returns': 'VncInfo' }
+##
+# @query-vnc-servers:
+#
+# Returns a list of vnc servers. The list can be empty.
+#
+# Returns: a list of @VncInfo2
+#
+# Since: 2.3
+##
+{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'] }
+
##
# @SpiceBasicInfo
#
# @connection-id: SPICE connection id number. All channels with the same id
# belong to the same SPICE session.
#
-# @connection-type: SPICE channel type number. "1" is the main control
-# channel, filter for this one if you want to track spice
-# sessions only
+# @channel-type: SPICE channel type number. "1" is the main control
+# channel, filter for this one if you want to track spice
+# sessions only
#
# @channel-id: SPICE channel ID number. Usually "0", might be different when
# multiple channels of the same type exist, such as multiple
##
# @inject-nmi:
#
-# Injects an Non-Maskable Interrupt into all guest's VCPUs.
+# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64).
#
# Returns: If successful, nothing
#
# Since: 0.14.0
#
-# Notes: Only x86 Virtual Machines support this command.
+# Note: prior to 2.1, this command was only supported for x86 and s390 VMs
##
{ 'command': 'inject-nmi' }
#
# A discriminated record of operations that can be performed with
# @transaction.
+#
+# Since 1.1
+#
+# drive-backup since 1.6
+# abort since 1.6
+# blockdev-snapshot-internal-sync since 1.7
+# blockdev-backup since 2.3
##
{ 'union': 'TransactionAction',
'data': {
'blockdev-snapshot-sync': 'BlockdevSnapshot',
'drive-backup': 'DriveBackup',
+ 'blockdev-backup': 'BlockdevBackup',
'abort': 'Abort',
'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal'
} }
#
# Change the VNC server password.
#
-# @target: the new password to use with VNC authentication
+# @password: the new password to use with VNC authentication
#
# Since: 1.1
#
#
# @name: the name of the property
# @type: the typename of the property
+# @description: #optional if specified, the description of the property.
+# (since 2.2)
#
# Since: 1.2
##
{ 'type': 'DevicePropertyInfo',
- 'data': { 'name': 'str', 'type': 'str' } }
+ 'data': { 'name': 'str', 'type': 'str', '*description': 'str' } }
##
# @device-list-properties:
{ 'command': 'migrate',
'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool', '*detach': 'bool' } }
+##
+# @migrate-incoming
+#
+# Start an incoming migration, the qemu must have been started
+# with -incoming defer
+#
+# @uri: The Uniform Resource Identifier identifying the source or
+# address to listen on
+#
+# Returns: nothing on success
+#
+# Since: 2.3
+# Note: It's a bad idea to use a string for the uri, but it needs to stay
+# compatible with -incoming and the format of the uri is already exposed
+# above libvirt
+##
+{ 'command': 'migrate-incoming', 'data': {'uri': 'str' } }
+
# @xen-save-devices-state:
#
# Save the state of all devices to file. The RAM and the block devices
'*localaddr': 'str',
'*udp': 'str' } }
+##
+# @NetdevL2TPv3Options
+#
+# Connect the VLAN to Ethernet over L2TPv3 Static tunnel
+#
+# @src: source address
+#
+# @dst: destination address
+#
+# @srcport: #optional source port - mandatory for udp, optional for ip
+#
+# @dstport: #optional destination port - mandatory for udp, optional for ip
+#
+# @ipv6: #optional - force the use of ipv6
+#
+# @udp: #optional - use the udp version of l2tpv3 encapsulation
+#
+# @cookie64: #optional - use 64 bit coookies
+#
+# @counter: #optional have sequence counter
+#
+# @pincounter: #optional pin sequence counter to zero -
+# workaround for buggy implementations or
+# networks with packet reorder
+#
+# @txcookie: #optional 32 or 64 bit transmit cookie
+#
+# @rxcookie: #optional 32 or 64 bit receive cookie
+#
+# @txsession: 32 bit transmit session
+#
+# @rxsession: #optional 32 bit receive session - if not specified
+# set to the same value as transmit
+#
+# @offset: #optional additional offset - allows the insertion of
+# additional application-specific data before the packet payload
+#
+# Since 2.1
+##
+{ 'type': 'NetdevL2TPv3Options',
+ 'data': {
+ 'src': 'str',
+ 'dst': 'str',
+ '*srcport': 'str',
+ '*dstport': 'str',
+ '*ipv6': 'bool',
+ '*udp': 'bool',
+ '*cookie64': 'bool',
+ '*counter': 'bool',
+ '*pincounter': 'bool',
+ '*txcookie': 'uint64',
+ '*rxcookie': 'uint64',
+ 'txsession': 'uint32',
+ '*rxsession': 'uint32',
+ '*offset': 'uint32' } }
+
##
# @NetdevVdeOptions
#
# A discriminated record of network device traits.
#
# Since 1.2
+#
+# 'l2tpv3' - since 2.1
+#
##
{ 'union': 'NetClientOptions',
'data': {
'nic': 'NetLegacyNicOptions',
'user': 'NetdevUserOptions',
'tap': 'NetdevTapOptions',
+ 'l2tpv3': 'NetdevL2TPv3Options',
'socket': 'NetdevSocketOptions',
'vde': 'NetdevVdeOptions',
'dump': 'NetdevDumpOptions',
# @nodelay: #optional set TCP_NODELAY socket option (default: false)
# @telnet: #optional enable telnet protocol on server
# sockets (default: false)
+# @reconnect: #optional For a client socket, if a socket is disconnected,
+# then attempt a reconnect after the given number of seconds.
+# Setting this to zero disables this function. (default: 0)
+# (Since: 2.2)
#
# Since: 1.4
##
-{ 'type': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress',
- '*server' : 'bool',
- '*wait' : 'bool',
- '*nodelay' : 'bool',
- '*telnet' : 'bool' } }
+{ 'type': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress',
+ '*server' : 'bool',
+ '*wait' : 'bool',
+ '*nodelay' : 'bool',
+ '*telnet' : 'bool',
+ '*reconnect' : 'int' } }
##
# @ChardevUdp:
#
# Configuration info for the new chardev backend.
#
-# Since: 1.4
+# Since: 1.4 (testdev since 2.2)
##
{ 'type': 'ChardevDummy', 'data': { } }
'mux' : 'ChardevMux',
'msmouse': 'ChardevDummy',
'braille': 'ChardevDummy',
+ 'testdev': 'ChardevDummy',
'stdio' : 'ChardevStdio',
'console': 'ChardevDummy',
'spicevmc' : 'ChardevSpiceChannel',
#
# Input event union.
#
+# @key: Input event of Keyboard
+# @btn: Input event of pointer buttons
+# @rel: Input event of relative pointer motion
+# @abs: Input event of absolute pointer motion
+#
# Since: 2.0
##
{ 'union' : 'InputEvent',
'rel' : 'InputMoveEvent',
'abs' : 'InputMoveEvent' } }
+##
+# @x-input-send-event
+#
+# Send input event(s) to guest.
+#
+# @console: #optional console to send event(s) to.
+# This parameter can be used to send the input event to
+# specific input devices in case (a) multiple input devices
+# of the same kind are added to the virtual machine and (b)
+# you have configured input routing (see docs/multiseat.txt)
+# for those input devices. If input routing is not
+# configured this parameter has no effect.
+# If @console is missing, only devices that aren't associated
+# with a console are admissible.
+# If @console is specified, it must exist, and both devices
+# associated with that console and devices not associated with a
+# console are admissible, but the former take precedence.
+
+#
+# @events: List of InputEvent union.
+#
+# Returns: Nothing on success.
+#
+# Since: 2.2
+#
+# Note: this command is experimental, and not a stable API.
+#
+##
+{ 'command': 'x-input-send-event',
+ 'data': { '*console':'int', 'events': [ 'InputEvent' ] } }
+
##
# @NumaOptions
#
##
{ 'enum': 'GuestPanicAction',
'data': [ 'pause' ] }
+
+##
+# @rtc-reset-reinjection
+#
+# This command will reset the RTC interrupt reinjection backlog.
+# Can be used if another mechanism to synchronize guest time
+# is in effect, for example QEMU guest agent's guest-set-time
+# command.
+#
+# Since: 2.1
+##
+{ 'command': 'rtc-reset-reinjection' }
projects / mirror_qemu.git / blobdiff