\input texinfo @c -*- texinfo -*-
@c %**start of header
@setfilename qemu-doc.info
+@include version.texi
@documentlanguage en
@documentencoding UTF-8
-@settitle QEMU Emulator User Documentation
+@settitle QEMU version @value{VERSION} User Documentation
@exampleindent 0
@paragraphindent 0
@c %**end of header
@iftex
@titlepage
@sp 7
-@center @titlefont{QEMU Emulator}
+@center @titlefont{QEMU version @value{VERSION}}
@sp 1
@center @titlefont{User Documentation}
@sp 3
@menu
* Introduction::
-* Installation::
* QEMU PC System emulator::
* QEMU System emulator for non PC targets::
+* QEMU Guest Agent::
* QEMU User space emulator::
-* compilation:: Compilation from the sources
+* Implementation notes::
+* Deprecated features::
* License::
* Index::
@end menu
QEMU is a FAST! processor emulator using dynamic translation to
achieve good emulation speed.
+@cindex operating modes
QEMU has two operating modes:
@itemize
-@cindex operating modes
-
-@item
@cindex system emulation
-Full system emulation. In this mode, QEMU emulates a full system (for
+@item Full system emulation. In this mode, QEMU emulates a full system (for
example a PC), including one or several processors and various
peripherals. It can be used to launch different Operating Systems
without rebooting the PC or to debug system code.
-@item
@cindex user mode emulation
-User mode emulation. In this mode, QEMU can launch
+@item User mode emulation. In this mode, QEMU can launch
processes compiled for one CPU on another CPU. It can be used to
launch the Wine Windows API emulator (@url{http://www.winehq.org}) or
to ease cross-compilation and cross-debugging.
@end itemize
-QEMU can run without a host kernel driver and yet gives acceptable
-performance.
+QEMU has the following features:
-For system emulation, the following hardware targets are supported:
@itemize
-@cindex emulated target systems
-@cindex supported target systems
-@item PC (x86 or x86_64 processor)
-@item ISA PC (old style PC without PCI bus)
-@item PREP (PowerPC processor)
-@item G3 Beige PowerMac (PowerPC processor)
-@item Mac99 PowerMac (PowerPC processor, in progress)
-@item Sun4m/Sun4c/Sun4d (32-bit Sparc processor)
-@item Sun4u/Sun4v (64-bit Sparc processor, in progress)
-@item Malta board (32-bit and 64-bit MIPS processors)
-@item MIPS Magnum (64-bit MIPS processor)
-@item ARM Integrator/CP (ARM)
-@item ARM Versatile baseboard (ARM)
-@item ARM RealView Emulation/Platform baseboard (ARM)
-@item Spitz, Akita, Borzoi, Terrier and Tosa PDAs (PXA270 processor)
-@item Luminary Micro LM3S811EVB (ARM Cortex-M3)
-@item Luminary Micro LM3S6965EVB (ARM Cortex-M3)
-@item Freescale MCF5208EVB (ColdFire V2).
-@item Arnewsh MCF5206 evaluation board (ColdFire V2).
-@item Palm Tungsten|E PDA (OMAP310 processor)
-@item N800 and N810 tablets (OMAP2420 processor)
-@item MusicPal (MV88W8618 ARM processor)
-@item Gumstix "Connex" and "Verdex" motherboards (PXA255/270).
-@item Siemens SX1 smartphone (OMAP310 processor)
-@item AXIS-Devboard88 (CRISv32 ETRAX-FS).
-@item Petalogix Spartan 3aDSP1800 MMU ref design (MicroBlaze).
-@item Avnet LX60/LX110/LX200 boards (Xtensa)
-@end itemize
+@item QEMU can run without a host kernel driver and yet gives acceptable
+performance. It uses dynamic translation to native code for reasonable speed,
+with support for self-modifying code and precise exceptions.
-@cindex supported user mode targets
-For user emulation, x86 (32 and 64 bit), PowerPC (32 and 64 bit),
-ARM, MIPS (32 bit only), Sparc (32 and 64 bit),
-Alpha, ColdFire(m68k), CRISv32 and MicroBlaze CPUs are supported.
+@item It is portable to several operating systems (GNU/Linux, *BSD, Mac OS X,
+Windows) and architectures.
-@node Installation
-@chapter Installation
+@item It performs accurate software emulation of the FPU.
+@end itemize
-If you want to compile QEMU yourself, see @ref{compilation}.
+QEMU user mode emulation has the following features:
+@itemize
+@item Generic Linux system call converter, including most ioctls.
-@menu
-* install_linux:: Linux
-* install_windows:: Windows
-* install_mac:: Macintosh
-@end menu
+@item clone() emulation using native CPU clone() to use Linux scheduler for threads.
-@node install_linux
-@section Linux
-@cindex installation (Linux)
+@item Accurate signal handling by remapping host signals to target signals.
+@end itemize
-If a precompiled package is available for your distribution - you just
-have to install it. Otherwise, see @ref{compilation}.
+QEMU full system emulation has the following features:
+@itemize
+@item
+QEMU uses a full software MMU for maximum portability.
+
+@item
+QEMU can optionally use an in-kernel accelerator, like kvm. The accelerators
+execute most of the guest code natively, while
+continuing to emulate the rest of the machine.
-@node install_windows
-@section Windows
-@cindex installation (Windows)
+@item
+Various hardware devices can be emulated and in some cases, host
+devices (e.g. serial and parallel ports, USB, drives) can be used
+transparently by the guest Operating System. Host device passthrough
+can be used for talking to external physical peripherals (e.g. a
+webcam, modem or tape drive).
-Download the experimental binary installer at
-@url{http://www.free.oszoo.org/@/download.html}.
-TODO (no longer available)
+@item
+Symmetric multiprocessing (SMP) support. Currently, an in-kernel
+accelerator is required to use more than one host CPU for emulation.
-@node install_mac
-@section Mac OS X
+@end itemize
-Download the experimental binary installer at
-@url{http://www.free.oszoo.org/@/download.html}.
-TODO (no longer available)
@node QEMU PC System emulator
@chapter QEMU PC System emulator
@item
CS4231A compatible sound card
@item
-PCI UHCI USB controller and a virtual USB hub.
+PCI UHCI, OHCI, EHCI or XHCI USB controller and a virtual USB-1.1 hub.
@end itemize
SMP is supported with up to 255 CPUs.
@node disk_images
@section Disk Images
-Since version 0.6.1, QEMU supports many disk image formats, including
-growable disk images (their size increase as non empty sectors are
-written), compressed and encrypted disk images. Version 0.8.3 added
-the new qcow2 disk image format which is essential to support VM
-snapshots.
+QEMU supports many disk image formats, including growable disk images
+(their size increase as non empty sectors are written), compressed and
+encrypted disk images.
@menu
* disk_images_quickstart:: Quick start for disk image creation
* vm_snapshots:: VM snapshots
* qemu_img_invocation:: qemu-img Invocation
* qemu_nbd_invocation:: qemu-nbd Invocation
-* qemu_ga_invocation:: qemu-ga Invocation
* disk_images_formats:: Disk image file formats
* host_drives:: Using host drives
* disk_images_fat_images:: Virtual FAT disk images
@include qemu-nbd.texi
-@node qemu_ga_invocation
-@subsection @code{qemu-ga} Invocation
-
-@include qemu-ga.texi
-
-@node disk_images_formats
-@subsection Disk image file formats
-
-QEMU supports many image file formats that can be used with VMs as well as with
-any of the tools (like @code{qemu-img}). This includes the preferred formats
-raw and qcow2 as well as formats that are supported for compatibility with
-older QEMU versions or other hypervisors.
-
-Depending on the image format, different options can be passed to
-@code{qemu-img create} and @code{qemu-img convert} using the @code{-o} option.
-This section describes each format and the options that are supported for it.
-
-@table @option
-@item raw
-
-Raw disk image format. This format has the advantage of
-being simple and easily exportable to all other emulators. If your
-file system supports @emph{holes} (for example in ext2 or ext3 on
-Linux or NTFS on Windows), then only the written sectors will reserve
-space. Use @code{qemu-img info} to know the real size used by the
-image or @code{ls -ls} on Unix/Linux.
-
-Supported options:
-@table @code
-@item preallocation
-Preallocation mode (allowed values: @code{off}, @code{falloc}, @code{full}).
-@code{falloc} mode preallocates space for image by calling posix_fallocate().
-@code{full} mode preallocates space for image by writing zeros to underlying
-storage.
-@end table
-
-@item qcow2
-QEMU image format, the most versatile format. Use it to have smaller
-images (useful if your filesystem does not supports holes, for example
-on Windows), zlib based compression and support of multiple VM
-snapshots.
-
-Supported options:
-@table @code
-@item compat
-Determines the qcow2 version to use. @code{compat=0.10} uses the
-traditional image format that can be read by any QEMU since 0.10.
-@code{compat=1.1} enables image format extensions that only QEMU 1.1 and
-newer understand (this is the default). Amongst others, this includes
-zero clusters, which allow efficient copy-on-read for sparse images.
-
-@item backing_file
-File name of a base image (see @option{create} subcommand)
-@item backing_fmt
-Image format of the base image
-@item encryption
-If this option is set to @code{on}, the image is encrypted with 128-bit AES-CBC.
-
-The use of encryption in qcow and qcow2 images is considered to be flawed by
-modern cryptography standards, suffering from a number of design problems:
-
-@itemize @minus
-@item The AES-CBC cipher is used with predictable initialization vectors based
-on the sector number. This makes it vulnerable to chosen plaintext attacks
-which can reveal the existence of encrypted data.
-@item The user passphrase is directly used as the encryption key. A poorly
-chosen or short passphrase will compromise the security of the encryption.
-@item In the event of the passphrase being compromised there is no way to
-change the passphrase to protect data in any qcow images. The files must
-be cloned, using a different encryption passphrase in the new file. The
-original file must then be securely erased using a program like shred,
-though even this is ineffective with many modern storage technologies.
-@end itemize
-
-Use of qcow / qcow2 encryption with QEMU is deprecated, and support for
-it will go away in a future release. Users are recommended to use an
-alternative encryption technology such as the Linux dm-crypt / LUKS
-system.
-
-@item cluster_size
-Changes the qcow2 cluster size (must be between 512 and 2M). Smaller cluster
-sizes can improve the image file size whereas larger cluster sizes generally
-provide better performance.
-
-@item preallocation
-Preallocation mode (allowed values: @code{off}, @code{metadata}, @code{falloc},
-@code{full}). An image with preallocated metadata is initially larger but can
-improve performance when the image needs to grow. @code{falloc} and @code{full}
-preallocations are like the same options of @code{raw} format, but sets up
-metadata also.
-
-@item lazy_refcounts
-If this option is set to @code{on}, reference count updates are postponed with
-the goal of avoiding metadata I/O and improving performance. This is
-particularly interesting with @option{cache=writethrough} which doesn't batch
-metadata updates. The tradeoff is that after a host crash, the reference count
-tables must be rebuilt, i.e. on the next open an (automatic) @code{qemu-img
-check -r all} is required, which may take some time.
-
-This option can only be enabled if @code{compat=1.1} is specified.
-
-@item nocow
-If this option is set to @code{on}, it will turn off COW of the file. It's only
-valid on btrfs, no effect on other file systems.
-
-Btrfs has low performance when hosting a VM image file, even more when the guest
-on the VM also using btrfs as file system. Turning off COW is a way to mitigate
-this bad performance. Generally there are two ways to turn off COW on btrfs:
-a) Disable it by mounting with nodatacow, then all newly created files will be
-NOCOW. b) For an empty file, add the NOCOW file attribute. That's what this option
-does.
-
-Note: this option is only valid to new or empty files. If there is an existing
-file which is COW and has data blocks already, it couldn't be changed to NOCOW
-by setting @code{nocow=on}. One can issue @code{lsattr filename} to check if
-the NOCOW flag is set or not (Capital 'C' is NOCOW flag).
-
-@end table
-
-@item qed
-Old QEMU image format with support for backing files and compact image files
-(when your filesystem or transport medium does not support holes).
-
-When converting QED images to qcow2, you might want to consider using the
-@code{lazy_refcounts=on} option to get a more QED-like behaviour.
-
-Supported options:
-@table @code
-@item backing_file
-File name of a base image (see @option{create} subcommand).
-@item backing_fmt
-Image file format of backing file (optional). Useful if the format cannot be
-autodetected because it has no header, like some vhd/vpc files.
-@item cluster_size
-Changes the cluster size (must be power-of-2 between 4K and 64K). Smaller
-cluster sizes can improve the image file size whereas larger cluster sizes
-generally provide better performance.
-@item table_size
-Changes the number of clusters per L1/L2 table (must be power-of-2 between 1
-and 16). There is normally no need to change this value but this option can be
-used for performance benchmarking.
-@end table
-
-@item qcow
-Old QEMU image format with support for backing files, compact image files,
-encryption and compression.
-
-Supported options:
-@table @code
-@item backing_file
-File name of a base image (see @option{create} subcommand)
-@item encryption
-If this option is set to @code{on}, the image is encrypted.
-@end table
-
-@item vdi
-VirtualBox 1.1 compatible image format.
-Supported options:
-@table @code
-@item static
-If this option is set to @code{on}, the image is created with metadata
-preallocation.
-@end table
-
-@item vmdk
-VMware 3 and 4 compatible image format.
-
-Supported options:
-@table @code
-@item backing_file
-File name of a base image (see @option{create} subcommand).
-@item compat6
-Create a VMDK version 6 image (instead of version 4)
-@item hwversion
-Specify vmdk virtual hardware version. Compat6 flag cannot be enabled
-if hwversion is specified.
-@item subformat
-Specifies which VMDK subformat to use. Valid options are
-@code{monolithicSparse} (default),
-@code{monolithicFlat},
-@code{twoGbMaxExtentSparse},
-@code{twoGbMaxExtentFlat} and
-@code{streamOptimized}.
-@end table
-
-@item vpc
-VirtualPC compatible image format (VHD).
-Supported options:
-@table @code
-@item subformat
-Specifies which VHD subformat to use. Valid options are
-@code{dynamic} (default) and @code{fixed}.
-@end table
-
-@item VHDX
-Hyper-V compatible image format (VHDX).
-Supported options:
-@table @code
-@item subformat
-Specifies which VHDX subformat to use. Valid options are
-@code{dynamic} (default) and @code{fixed}.
-@item block_state_zero
-Force use of payload blocks of type 'ZERO'. Can be set to @code{on} (default)
-or @code{off}. When set to @code{off}, new blocks will be created as
-@code{PAYLOAD_BLOCK_NOT_PRESENT}, which means parsers are free to return
-arbitrary data for those blocks. Do not set to @code{off} when using
-@code{qemu-img convert} with @code{subformat=dynamic}.
-@item block_size
-Block size; min 1 MB, max 256 MB. 0 means auto-calculate based on image size.
-@item log_size
-Log size; min 1 MB.
-@end table
-@end table
-
-@subsubsection Read-only formats
-More disk image file formats are supported in a read-only mode.
-@table @option
-@item bochs
-Bochs images of @code{growing} type.
-@item cloop
-Linux Compressed Loop image, useful only to reuse directly compressed
-CD-ROM images present for example in the Knoppix CD-ROMs.
-@item dmg
-Apple disk image.
-@item parallels
-Parallels disk image format.
-@end table
-
-
-@node host_drives
-@subsection Using host drives
-
-In addition to disk image files, QEMU can directly access host
-devices. We describe here the usage for QEMU version >= 0.8.3.
-
-@subsubsection Linux
-
-On Linux, you can directly use the host device filename instead of a
-disk image filename provided you have enough privileges to access
-it. For example, use @file{/dev/cdrom} to access to the CDROM.
-
-@table @code
-@item CD
-You can specify a CDROM device even if no CDROM is loaded. QEMU has
-specific code to detect CDROM insertion or removal. CDROM ejection by
-the guest OS is supported. Currently only data CDs are supported.
-@item Floppy
-You can specify a floppy device even if no floppy is loaded. Floppy
-removal is currently not detected accurately (if you change floppy
-without doing floppy access while the floppy is not loaded, the guest
-OS will think that the same floppy is loaded).
-Use of the host's floppy device is deprecated, and support for it will
-be removed in a future release.
-@item Hard disks
-Hard disks can be used. Normally you must specify the whole disk
-(@file{/dev/hdb} instead of @file{/dev/hdb1}) so that the guest OS can
-see it as a partitioned disk. WARNING: unless you know what you do, it
-is better to only make READ-ONLY accesses to the hard disk otherwise
-you may corrupt your host data (use the @option{-snapshot} command
-line option or modify the device permissions accordingly).
-@end table
-
-@subsubsection Windows
-
-@table @code
-@item CD
-The preferred syntax is the drive letter (e.g. @file{d:}). The
-alternate syntax @file{\\.\d:} is supported. @file{/dev/cdrom} is
-supported as an alias to the first CDROM drive.
-
-Currently there is no specific code to handle removable media, so it
-is better to use the @code{change} or @code{eject} monitor commands to
-change or eject media.
-@item Hard disks
-Hard disks can be used with the syntax: @file{\\.\PhysicalDrive@var{N}}
-where @var{N} is the drive number (0 is the first hard disk).
-
-WARNING: unless you know what you do, it is better to only make
-READ-ONLY accesses to the hard disk otherwise you may corrupt your
-host data (use the @option{-snapshot} command line so that the
-modifications are written in a temporary file).
-@end table
-
-
-@subsubsection Mac OS X
-
-@file{/dev/cdrom} is an alias to the first CDROM.
-
-Currently there is no specific code to handle removable media, so it
-is better to use the @code{change} or @code{eject} monitor commands to
-change or eject media.
-
-@node disk_images_fat_images
-@subsection Virtual FAT disk images
-
-QEMU can automatically create a virtual FAT disk image from a
-directory tree. In order to use it, just type:
-
-@example
-qemu-system-i386 linux.img -hdb fat:/my_directory
-@end example
-
-Then you access access to all the files in the @file{/my_directory}
-directory without having to copy them in a disk image or to export
-them via SAMBA or NFS. The default access is @emph{read-only}.
-
-Floppies can be emulated with the @code{:floppy:} option:
-
-@example
-qemu-system-i386 linux.img -fda fat:floppy:/my_directory
-@end example
-
-A read/write support is available for testing (beta stage) with the
-@code{:rw:} option:
-
-@example
-qemu-system-i386 linux.img -fda fat:floppy:rw:/my_directory
-@end example
-
-What you should @emph{never} do:
-@itemize
-@item use non-ASCII filenames ;
-@item use "-snapshot" together with ":rw:" ;
-@item expect it to work when loadvm'ing ;
-@item write to the FAT directory on the host system while accessing it with the guest system.
-@end itemize
-
-@node disk_images_nbd
-@subsection NBD access
-
-QEMU can access directly to block device exported using the Network Block Device
-protocol.
-
-@example
-qemu-system-i386 linux.img -hdb nbd://my_nbd_server.mydomain.org:1024/
-@end example
-
-If the NBD server is located on the same host, you can use an unix socket instead
-of an inet socket:
-
-@example
-qemu-system-i386 linux.img -hdb nbd+unix://?socket=/tmp/my_socket
-@end example
-
-In this case, the block device must be exported using qemu-nbd:
-
-@example
-qemu-nbd --socket=/tmp/my_socket my_disk.qcow2
-@end example
-
-The use of qemu-nbd allows sharing of a disk between several guests:
-@example
-qemu-nbd --socket=/tmp/my_socket --share=2 my_disk.qcow2
-@end example
-
-@noindent
-and then you can use it with two guests:
-@example
-qemu-system-i386 linux1.img -hdb nbd+unix://?socket=/tmp/my_socket
-qemu-system-i386 linux2.img -hdb nbd+unix://?socket=/tmp/my_socket
-@end example
-
-If the nbd-server uses named exports (supported since NBD 2.9.18, or with QEMU's
-own embedded NBD server), you must specify an export name in the URI:
-@example
-qemu-system-i386 -cdrom nbd://localhost/debian-500-ppc-netinst
-qemu-system-i386 -cdrom nbd://localhost/openSUSE-11.1-ppc-netinst
-@end example
-
-The URI syntax for NBD is supported since QEMU 1.3. An alternative syntax is
-also available. Here are some example of the older syntax:
-@example
-qemu-system-i386 linux.img -hdb nbd:my_nbd_server.mydomain.org:1024
-qemu-system-i386 linux2.img -hdb nbd:unix:/tmp/my_socket
-qemu-system-i386 -cdrom nbd:localhost:10809:exportname=debian-500-ppc-netinst
-@end example
-
-@node disk_images_sheepdog
-@subsection Sheepdog disk images
-
-Sheepdog is a distributed storage system for QEMU. It provides highly
-available block level storage volumes that can be attached to
-QEMU-based virtual machines.
-
-You can create a Sheepdog disk image with the command:
-@example
-qemu-img create sheepdog:///@var{image} @var{size}
-@end example
-where @var{image} is the Sheepdog image name and @var{size} is its
-size.
-
-To import the existing @var{filename} to Sheepdog, you can use a
-convert command.
-@example
-qemu-img convert @var{filename} sheepdog:///@var{image}
-@end example
-
-You can boot from the Sheepdog disk image with the command:
-@example
-qemu-system-i386 sheepdog:///@var{image}
-@end example
-
-You can also create a snapshot of the Sheepdog image like qcow2.
-@example
-qemu-img snapshot -c @var{tag} sheepdog:///@var{image}
-@end example
-where @var{tag} is a tag name of the newly created snapshot.
-
-To boot from the Sheepdog snapshot, specify the tag name of the
-snapshot.
-@example
-qemu-system-i386 sheepdog:///@var{image}#@var{tag}
-@end example
-
-You can create a cloned image from the existing snapshot.
-@example
-qemu-img create -b sheepdog:///@var{base}#@var{tag} sheepdog:///@var{image}
-@end example
-where @var{base} is a image name of the source snapshot and @var{tag}
-is its tag name.
-
-You can use an unix socket instead of an inet socket:
-
-@example
-qemu-system-i386 sheepdog+unix:///@var{image}?socket=@var{path}
-@end example
-
-If the Sheepdog daemon doesn't run on the local host, you need to
-specify one of the Sheepdog servers to connect to.
-@example
-qemu-img create sheepdog://@var{hostname}:@var{port}/@var{image} @var{size}
-qemu-system-i386 sheepdog://@var{hostname}:@var{port}/@var{image}
-@end example
-
-@node disk_images_iscsi
-@subsection iSCSI LUNs
-
-iSCSI is a popular protocol used to access SCSI devices across a computer
-network.
-
-There are two different ways iSCSI devices can be used by QEMU.
-
-The first method is to mount the iSCSI LUN on the host, and make it appear as
-any other ordinary SCSI device on the host and then to access this device as a
-/dev/sd device from QEMU. How to do this differs between host OSes.
-
-The second method involves using the iSCSI initiator that is built into
-QEMU. This provides a mechanism that works the same way regardless of which
-host OS you are running QEMU on. This section will describe this second method
-of using iSCSI together with QEMU.
-
-In QEMU, iSCSI devices are described using special iSCSI URLs
-
-@example
-URL syntax:
-iscsi://[<username>[%<password>]@@]<host>[:<port>]/<target-iqn-name>/<lun>
-@end example
-
-Username and password are optional and only used if your target is set up
-using CHAP authentication for access control.
-Alternatively the username and password can also be set via environment
-variables to have these not show up in the process list
-
-@example
-export LIBISCSI_CHAP_USERNAME=<username>
-export LIBISCSI_CHAP_PASSWORD=<password>
-iscsi://<host>/<target-iqn-name>/<lun>
-@end example
-
-Various session related parameters can be set via special options, either
-in a configuration file provided via '-readconfig' or directly on the
-command line.
-
-If the initiator-name is not specified qemu will use a default name
-of 'iqn.2008-11.org.linux-kvm[:<name>'] where <name> is the name of the
-virtual machine.
-
-
-@example
-Setting a specific initiator name to use when logging in to the target
--iscsi initiator-name=iqn.qemu.test:my-initiator
-@end example
-
-@example
-Controlling which type of header digest to negotiate with the target
--iscsi header-digest=CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
-@end example
-
-These can also be set via a configuration file
-@example
-[iscsi]
- user = "CHAP username"
- password = "CHAP password"
- initiator-name = "iqn.qemu.test:my-initiator"
- # header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
- header-digest = "CRC32C"
-@end example
-
-
-Setting the target name allows different options for different targets
-@example
-[iscsi "iqn.target.name"]
- user = "CHAP username"
- password = "CHAP password"
- initiator-name = "iqn.qemu.test:my-initiator"
- # header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
- header-digest = "CRC32C"
-@end example
-
-
-Howto use a configuration file to set iSCSI configuration options:
-@example
-cat >iscsi.conf <<EOF
-[iscsi]
- user = "me"
- password = "my password"
- initiator-name = "iqn.qemu.test:my-initiator"
- header-digest = "CRC32C"
-EOF
-
-qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
- -readconfig iscsi.conf
-@end example
-
-
-Howto set up a simple iSCSI target on loopback and accessing it via QEMU:
-@example
-This example shows how to set up an iSCSI target with one CDROM and one DISK
-using the Linux STGT software target. This target is available on Red Hat based
-systems as the package 'scsi-target-utils'.
-
-tgtd --iscsi portal=127.0.0.1:3260
-tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.qemu.test
-tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 1 \
- -b /IMAGES/disk.img --device-type=disk
-tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 2 \
- -b /IMAGES/cd.iso --device-type=cd
-tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL
-
-qemu-system-i386 -iscsi initiator-name=iqn.qemu.test:my-initiator \
- -boot d -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
- -cdrom iscsi://127.0.0.1/iqn.qemu.test/2
-@end example
-
-@node disk_images_gluster
-@subsection GlusterFS disk images
-
-GlusterFS is an user space distributed file system.
-
-You can boot from the GlusterFS disk image with the command:
-@example
-qemu-system-x86_64 -drive file=gluster[+@var{transport}]://[@var{server}[:@var{port}]]/@var{volname}/@var{image}[?socket=...]
-@end example
-
-@var{gluster} is the protocol.
-
-@var{transport} specifies the transport type used to connect to gluster
-management daemon (glusterd). Valid transport types are
-tcp, unix and rdma. If a transport type isn't specified, then tcp
-type is assumed.
-
-@var{server} specifies the server where the volume file specification for
-the given volume resides. This can be either hostname, ipv4 address
-or ipv6 address. ipv6 address needs to be within square brackets [ ].
-If transport type is unix, then @var{server} field should not be specified.
-Instead @var{socket} field needs to be populated with the path to unix domain
-socket.
-
-@var{port} is the port number on which glusterd is listening. This is optional
-and if not specified, QEMU will send 0 which will make gluster to use the
-default port. If the transport type is unix, then @var{port} should not be
-specified.
-
-@var{volname} is the name of the gluster volume which contains the disk image.
-
-@var{image} is the path to the actual disk image that resides on gluster volume.
-
-You can create a GlusterFS disk image with the command:
-@example
-qemu-img create gluster://@var{server}/@var{volname}/@var{image} @var{size}
-@end example
-
-Examples
-@example
-qemu-system-x86_64 -drive file=gluster://1.2.3.4/testvol/a.img
-qemu-system-x86_64 -drive file=gluster+tcp://1.2.3.4/testvol/a.img
-qemu-system-x86_64 -drive file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img
-qemu-system-x86_64 -drive file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img
-qemu-system-x86_64 -drive file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img
-qemu-system-x86_64 -drive file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
-qemu-system-x86_64 -drive file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
-qemu-system-x86_64 -drive file=gluster+rdma://1.2.3.4:24007/testvol/a.img
-@end example
-
-@node disk_images_ssh
-@subsection Secure Shell (ssh) disk images
-
-You can access disk images located on a remote ssh server
-by using the ssh protocol:
-
-@example
-qemu-system-x86_64 -drive file=ssh://[@var{user}@@]@var{server}[:@var{port}]/@var{path}[?host_key_check=@var{host_key_check}]
-@end example
-
-Alternative syntax using properties:
-
-@example
-qemu-system-x86_64 -drive file.driver=ssh[,file.user=@var{user}],file.host=@var{server}[,file.port=@var{port}],file.path=@var{path}[,file.host_key_check=@var{host_key_check}]
-@end example
-
-@var{ssh} is the protocol.
-
-@var{user} is the remote user. If not specified, then the local
-username is tried.
-
-@var{server} specifies the remote ssh server. Any ssh server can be
-used, but it must implement the sftp-server protocol. Most Unix/Linux
-systems should work without requiring any extra configuration.
-
-@var{port} is the port number on which sshd is listening. By default
-the standard ssh port (22) is used.
-
-@var{path} is the path to the disk image.
-
-The optional @var{host_key_check} parameter controls how the remote
-host's key is checked. The default is @code{yes} which means to use
-the local @file{.ssh/known_hosts} file. Setting this to @code{no}
-turns off known-hosts checking. Or you can check that the host key
-matches a specific fingerprint:
-@code{host_key_check=md5:78:45:8e:14:57:4f:d5:45:83:0a:0e:f3:49:82:c9:c8}
-(@code{sha1:} can also be used as a prefix, but note that OpenSSH
-tools only use MD5 to print fingerprints).
-
-Currently authentication must be done using ssh-agent. Other
-authentication methods may be supported in future.
-
-Note: Many ssh servers do not support an @code{fsync}-style operation.
-The ssh driver cannot guarantee that disk flush requests are
-obeyed, and this causes a risk of disk corruption if the remote
-server or network goes down during writes. The driver will
-print a warning when @code{fsync} is not supported:
-
-warning: ssh server @code{ssh.example.com:22} does not support fsync
-
-With sufficiently new versions of libssh2 and OpenSSH, @code{fsync} is
-supported.
+@include docs/qemu-block-drivers.texi
@node pcsys_network
@section Network emulation
@node pcsys_usb
@section USB emulation
-QEMU emulates a PCI UHCI USB controller. You can virtually plug
-virtual USB devices or real host USB devices (experimental, works only
-on Linux hosts). QEMU will automatically create and connect virtual USB hubs
-as necessary to connect multiple USB devices.
+QEMU can emulate a PCI UHCI, OHCI, EHCI or XHCI USB controller. You can
+plug virtual USB devices or real host USB devices (only works with certain
+host operating systems). QEMU will automatically create and connect virtual
+USB hubs as necessary to connect multiple USB devices.
@menu
* usb_devices::
@node usb_devices
@subsection Connecting USB devices
-USB devices can be connected with the @option{-usbdevice} commandline option
-or the @code{usb_add} monitor command. Available devices are:
+USB devices can be connected with the @option{-device usb-...} command line
+option or the @code{device_add} monitor command. Available devices are:
@table @code
-@item mouse
+@item usb-mouse
Virtual Mouse. This will override the PS/2 mouse emulation when activated.
-@item tablet
+@item usb-tablet
Pointer device that uses absolute coordinates (like a touchscreen).
This means QEMU is able to report the mouse position without having
to grab the mouse. Also overrides the PS/2 mouse emulation when activated.
-@item disk:@var{file}
-Mass storage device based on @var{file} (@pxref{disk_images})
-@item host:@var{bus.addr}
-Pass through the host device identified by @var{bus.addr}
-(Linux only)
-@item host:@var{vendor_id:product_id}
-Pass through the host device identified by @var{vendor_id:product_id}
-(Linux only)
-@item wacom-tablet
+@item usb-storage,drive=@var{drive_id}
+Mass storage device backed by @var{drive_id} (@pxref{disk_images})
+@item usb-uas
+USB attached SCSI device, see
+@url{http://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/usb-storage.txt,usb-storage.txt}
+for details
+@item usb-bot
+Bulk-only transport storage device, see
+@url{http://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/usb-storage.txt,usb-storage.txt}
+for details here, too
+@item usb-mtp,x-root=@var{dir}
+Media transfer protocol device, using @var{dir} as root of the file tree
+that is presented to the guest.
+@item usb-host,hostbus=@var{bus},hostaddr=@var{addr}
+Pass through the host device identified by @var{bus} and @var{addr}
+@item usb-host,vendorid=@var{vendor},productid=@var{product}
+Pass through the host device identified by @var{vendor} and @var{product} ID
+@item usb-wacom-tablet
Virtual Wacom PenPartner tablet. This device is similar to the @code{tablet}
above but it can be used with the tslib library because in addition to touch
coordinates it reports touch pressure.
-@item keyboard
+@item usb-kbd
Standard USB keyboard. Will override the PS/2 keyboard (if present).
-@item serial:[vendorid=@var{vendor_id}][,product_id=@var{product_id}]:@var{dev}
+@item usb-serial,chardev=@var{id}
Serial converter. This emulates an FTDI FT232BM chip connected to host character
-device @var{dev}. The available character devices are the same as for the
-@code{-serial} option. The @code{vendorid} and @code{productid} options can be
-used to override the default 0403:6001. For instance,
-@example
-usb_add serial:productid=FA00:tcp:192.168.0.2:4444
-@end example
-will connect to tcp port 4444 of ip 192.168.0.2, and plug that to the virtual
-serial converter, faking a Matrix Orbital LCD Display (USB ID 0403:FA00).
-@item braille
+device @var{id}.
+@item usb-braille,chardev=@var{id}
Braille device. This will use BrlAPI to display the braille output on a real
-or fake device.
-@item net:@var{options}
-Network adapter that supports CDC ethernet and RNDIS protocols. @var{options}
-specifies NIC options as with @code{-net nic,}@var{options} (see description).
+or fake device referenced by @var{id}.
+@item usb-net[,netdev=@var{id}]
+Network adapter that supports CDC ethernet and RNDIS protocols. @var{id}
+specifies a netdev defined with @code{-netdev @dots{},id=@var{id}}.
For instance, user-mode networking can be used with
@example
-qemu-system-i386 [...OPTIONS...] -net user,vlan=0 -usbdevice net:vlan=0
-@end example
-Currently this cannot be used in machines that support PCI NICs.
-@item bt[:@var{hci-type}]
-Bluetooth dongle whose type is specified in the same format as with
+qemu-system-i386 [...] -netdev user,id=net0 -device usb-net,netdev=net0
+@end example
+@item usb-ccid
+Smartcard reader device
+@item usb-audio
+USB audio device
+@item usb-bt-dongle
+Bluetooth dongle for the transport layer of HCI. It is connected to HCI
+scatternet 0 by default (corresponds to @code{-bt hci,vlan=0}).
+Note that the syntax for the @code{-device usb-bt-dongle} option is not as
+useful yet as it was with the legacy @code{-usbdevice} option. So to
+configure an USB bluetooth device, you might need to use
+"@code{-usbdevice bt}[:@var{hci-type}]" instead. This configures a
+bluetooth dongle whose type is specified in the same format as with
the @option{-bt hci} option, @pxref{bt-hcis,,allowed HCI types}. If
no type is given, the HCI logic corresponds to @code{-bt hci,vlan=0}.
This USB device implements the USB Transport Layer of HCI. Example
@item Add the device in QEMU by using:
@example
-usb_add host:1234:5678
+device_add usb-host,vendorid=0x1234,productid=0x5678
@end example
-Normally the guest OS should report that a new USB device is
-plugged. You can use the option @option{-usbdevice} to do the same.
+Normally the guest OS should report that a new USB device is plugged.
+You can use the option @option{-device usb-host,...} to do the same.
@item Now you can try to use the host USB device in QEMU.
unprivileged user, an environment variable SASL_CONF_PATH can be used
to make it search alternate locations for the service config.
-The default configuration might contain
+If the TLS option is enabled for VNC, then it will provide session encryption,
+otherwise the SASL mechanism will have to provide encryption. In the latter
+case the list of possible plugins that can be used is drastically reduced. In
+fact only the GSSAPI SASL mechanism provides an acceptable level of security
+by modern standards. Previous versions of QEMU referred to the DIGEST-MD5
+mechanism, however, it has multiple serious flaws described in detail in
+RFC 6331 and thus should never be used any more. The SCRAM-SHA-1 mechanism
+provides a simple username/password auth facility similar to DIGEST-MD5, but
+does not support session encryption, so can only be used in combination with
+TLS.
+
+When not using TLS the recommended configuration is
@example
-mech_list: digest-md5
-sasldb_path: /etc/qemu/passwd.db
+mech_list: gssapi
+keytab: /etc/qemu/krb5.tab
@end example
-This says to use the 'Digest MD5' mechanism, which is similar to the HTTP
-Digest-MD5 mechanism. The list of valid usernames & passwords is maintained
-in the /etc/qemu/passwd.db file, and can be updated using the saslpasswd2
-command. While this mechanism is easy to configure and use, it is not
-considered secure by modern standards, so only suitable for developers /
-ad-hoc testing.
+This says to use the 'GSSAPI' mechanism with the Kerberos v5 protocol, with
+the server principal stored in /etc/qemu/krb5.tab. For this to work the
+administrator of your KDC must generate a Kerberos principal for the server,
+with a name of 'qemu/somehost.example.com@@EXAMPLE.COM' replacing
+'somehost.example.com' with the fully qualified host name of the machine
+running QEMU, and 'EXAMPLE.COM' with the Kerberos Realm.
-A more serious deployment might use Kerberos, which is done with the 'gssapi'
-mechanism
+When using TLS, if username+password authentication is desired, then a
+reasonable configuration is
@example
-mech_list: gssapi
-keytab: /etc/qemu/krb5.tab
+mech_list: scram-sha-1
+sasldb_path: /etc/qemu/passwd.db
@end example
-For this to work the administrator of your KDC must generate a Kerberos
-principal for the server, with a name of 'qemu/somehost.example.com@@EXAMPLE.COM'
-replacing 'somehost.example.com' with the fully qualified host name of the
-machine running QEMU, and 'EXAMPLE.COM' with the Kerberos Realm.
+The saslpasswd2 program can be used to populate the passwd.db file with
+accounts.
-Other configurations will be left as an exercise for the reader. It should
-be noted that only Digest-MD5 and GSSAPI provides a SSF layer for data
-encryption. For all other mechanisms, VNC should always be configured to
-use TLS and x509 certificates to protect security credentials from snooping.
+Other SASL configurations will be left as an exercise for the reader. Note that
+all mechanisms except GSSAPI, should be combined with use of TLS to ensure a
+secure data channel.
@node gdb_usage
@section GDB usage
Windows 9x does not correctly use the CPU HLT
instruction. The result is that it takes host CPU cycles even when
idle. You can install the utility from
-@url{http://www.user.cityline.ru/~maxamn/amnhltm.zip} to solve this
-problem. Note that no such tool is needed for NT, 2000 or XP.
+@url{http://web.archive.org/web/20060212132151/http://www.user.cityline.ru/~maxamn/amnhltm.zip}
+to solve this problem. Note that no such tool is needed for NT, 2000 or XP.
@subsubsection Windows 2000 disk full problem
@subsubsection CPU usage reduction
DOS does not correctly use the CPU HLT instruction. The result is that
-it takes host CPU cycles even when idle. You can install the utility
-from @url{http://www.vmware.com/software/dosidle210.zip} to solve this
-problem.
+it takes host CPU cycles even when idle. You can install the utility from
+@url{http://web.archive.org/web/20051222085335/http://www.vmware.com/software/dosidle210.zip}
+to solve this problem.
@node QEMU System emulator for non PC targets
@chapter QEMU System emulator for non PC targets
(UltraSPARC PC-like machine), Sun4v (T1 PC-like machine), or generic
Niagara (T1) machine. The Sun4u emulator is mostly complete, being
able to run Linux, NetBSD and OpenBSD in headless (-nographic) mode. The
-Sun4v and Niagara emulators are still a work in progress.
+Sun4v emulator is still a work in progress.
+
+The Niagara T1 emulator makes use of firmware and OS binaries supplied in the S10image/ directory
+of the OpenSPARC T1 project @url{http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2}
+and is able to boot the disk.s10hw2 Solaris image.
+@example
+qemu-system-sparc64 -M niagara -L /path-to/S10image/ \
+ -nographic -m 256 \
+ -drive if=pflash,readonly=on,file=/S10image/disk.s10hw2
+@end example
+
QEMU emulates the following peripherals:
qemu-system-sparc64 -prom-env 'auto-boot?=false'
@end example
-@item -M [sun4u|sun4v|Niagara]
+@item -M [sun4u|sun4v|niagara]
Set the emulated machine type. The default is sun4u.
@end table
+@c man end
+
@node ColdFire System emulator
@section ColdFire System emulator
@cindex system emulation (ColdFire)
@end table
+@c man end
+
@node Cris System emulator
@section Cris System emulator
@cindex system emulation (Cris)
so should only be used with trusted guest OS.
@end table
+
+@c man end
+
+@node QEMU Guest Agent
+@chapter QEMU Guest Agent invocation
+
+@include qemu-ga.texi
+
@node QEMU User space emulator
@chapter QEMU User space emulator
@menu
* Supported Operating Systems ::
+* Features::
* Linux User space emulator::
* BSD User space emulator ::
@end menu
BSD (referred as qemu-bsd-user)
@end itemize
+@node Features
+@section Features
+
+QEMU user space emulation has the following notable features:
+
+@table @strong
+@item System call translation:
+QEMU includes a generic system call translator. This means that
+the parameters of the system calls can be converted to fix
+endianness and 32/64-bit mismatches between hosts and targets.
+IOCTLs can be converted too.
+
+@item POSIX signal handling:
+QEMU can redirect to the running program all signals coming from
+the host (such as @code{SIGALRM}), as well as synthesize signals from
+virtual CPU exceptions (for example @code{SIGFPE} when the program
+executes a division by zero).
+
+QEMU relies on the host kernel to emulate most signal system
+calls, for example to emulate the signal mask. On Linux, QEMU
+supports both normal and real-time signals.
+
+@item Threading:
+On Linux, QEMU can emulate the @code{clone} syscall and create a real
+host thread (with a separate virtual CPU) for each emulated thread.
+Note that not all targets currently emulate atomic operations correctly.
+x86 and ARM use a global lock in order to preserve their semantics.
+@end table
+
+QEMU was conceived so that ultimately it can emulate itself. Although
+it is not very useful, it is an important test to show the power of the
+emulator.
+
@node Linux User space emulator
@section Linux User space emulator
@command{qemu-mips} TODO.
@command{qemu-mipsel} TODO.
+@cindex user mode (NiosII)
+@command{qemu-nios2} TODO.
+
@cindex user mode (PowerPC)
@command{qemu-ppc64abi32} TODO.
@command{qemu-ppc64} TODO.
Run the emulation in single step mode.
@end table
-@node compilation
-@chapter Compilation from the sources
-@menu
-* Linux/Unix::
-* Windows::
-* Cross compilation for Windows with Linux::
-* Mac OS X::
-* Make targets::
-@end menu
+@include qemu-tech.texi
-@node Linux/Unix
-@section Linux/Unix
+@node Deprecated features
+@appendix Deprecated features
-@subsection Compilation
+In general features are intended to be supported indefinitely once
+introduced into QEMU. In the event that a feature needs to be removed,
+it will be listed in this appendix. The feature will remain functional
+for 2 releases prior to actual removal. Deprecated features may also
+generate warnings on the console when QEMU starts up, or if activated
+via a monitor command, however, this is not a mandatory requirement.
-First you must decompress the sources:
-@example
-cd /tmp
-tar zxvf qemu-x.y.z.tar.gz
-cd qemu-x.y.z
-@end example
+Prior to the 2.10.0 release there was no official policy on how
+long features would be deprecated prior to their removal, nor
+any documented list of which features were deprecated. Thus
+any features deprecated prior to 2.10.0 will be treated as if
+they were first deprecated in the 2.10.0 release.
-Then you configure QEMU and build it (usually no options are needed):
-@example
-./configure
-make
-@end example
+What follows is a list of all features currently marked as
+deprecated.
-Then type as root user:
-@example
-make install
-@end example
-to install QEMU in @file{/usr/local}.
+@section System emulator command line arguments
-@node Windows
-@section Windows
+@subsection -drive boot=on|off (since 1.3.0)
-@itemize
-@item Install the current versions of MSYS and MinGW from
-@url{http://www.mingw.org/}. You can find detailed installation
-instructions in the download section and the FAQ.
+The ``boot=on|off'' option to the ``-drive'' argument is
+ignored. Applications should use the ``bootindex=N'' parameter
+to set an absolute ordering between devices instead.
-@item Download
-the MinGW development library of SDL 1.2.x
-(@file{SDL-devel-1.2.x-@/mingw32.tar.gz}) from
-@url{http://www.libsdl.org}. Unpack it in a temporary place and
-edit the @file{sdl-config} script so that it gives the
-correct SDL directory when invoked.
+@subsection -tdf (since 1.3.0)
-@item Install the MinGW version of zlib and make sure
-@file{zlib.h} and @file{libz.dll.a} are in
-MinGW's default header and linker search paths.
+The ``-tdf'' argument is ignored. The behaviour implemented
+by this argument is now the default when using the KVM PIT,
+but can be requested explicitly using
+``-global kvm-pit.lost_tick_policy=slew''.
-@item Extract the current version of QEMU.
+@subsection -no-kvm-pit-reinjection (since 1.3.0)
-@item Start the MSYS shell (file @file{msys.bat}).
+The ``-no-kvm-pit-reinjection'' argument is now a
+synonym for setting ``-global kvm-pit.lost_tick_policy=discard''.
-@item Change to the QEMU directory. Launch @file{./configure} and
-@file{make}. If you have problems using SDL, verify that
-@file{sdl-config} can be launched from the MSYS command line.
+@subsection -no-kvm-irqchip (since 1.3.0)
-@item You can install QEMU in @file{Program Files/QEMU} by typing
-@file{make install}. Don't forget to copy @file{SDL.dll} in
-@file{Program Files/QEMU}.
+The ``-no-kvm-irqchip'' argument is now a synonym for
+setting ``-machine kernel_irqchip=off''.
-@end itemize
+@subsection -no-kvm-pit (since 1.3.0)
-@node Cross compilation for Windows with Linux
-@section Cross compilation for Windows with Linux
+The ``-no-kvm-pit'' argument is ignored. It is no longer
+possible to disable the KVM PIT directly.
-@itemize
-@item
-Install the MinGW cross compilation tools available at
-@url{http://www.mingw.org/}.
+@subsection -no-kvm (since 1.3.0)
-@item Download
-the MinGW development library of SDL 1.2.x
-(@file{SDL-devel-1.2.x-@/mingw32.tar.gz}) from
-@url{http://www.libsdl.org}. Unpack it in a temporary place and
-edit the @file{sdl-config} script so that it gives the
-correct SDL directory when invoked. Set up the @code{PATH} environment
-variable so that @file{sdl-config} can be launched by
-the QEMU configuration script.
+The ``-no-kvm'' argument is now a synonym for setting
+``-machine accel=tcg''.
-@item Install the MinGW version of zlib and make sure
-@file{zlib.h} and @file{libz.dll.a} are in
-MinGW's default header and linker search paths.
+@subsection -mon default=on (since 2.4.0)
-@item
-Configure QEMU for Windows cross compilation:
-@example
-PATH=/usr/i686-pc-mingw32/sys-root/mingw/bin:$PATH ./configure --cross-prefix='i686-pc-mingw32-'
-@end example
-The example assumes @file{sdl-config} is installed under @file{/usr/i686-pc-mingw32/sys-root/mingw/bin} and
-MinGW cross compilation tools have names like @file{i686-pc-mingw32-gcc} and @file{i686-pc-mingw32-strip}.
-We set the @code{PATH} environment variable to ensure the MinGW version of @file{sdl-config} is used and
-use --cross-prefix to specify the name of the cross compiler.
-You can also use --prefix to set the Win32 install path which defaults to @file{c:/Program Files/QEMU}.
+The ``default'' option to the ``-mon'' argument is
+now ignored. When multiple monitors were enabled, it
+indicated which monitor would receive log messages
+from the various subsystems. This feature is no longer
+required as messages are now only sent to the monitor
+in response to explicitly monitor commands.
-Under Fedora Linux, you can run:
-@example
-yum -y install mingw32-gcc mingw32-SDL mingw32-zlib
-@end example
-to get a suitable cross compilation environment.
+@subsection -vnc tls (since 2.5.0)
-@item You can install QEMU in the installation directory by typing
-@code{make install}. Don't forget to copy @file{SDL.dll} and @file{zlib1.dll} into the
-installation directory.
+The ``-vnc tls'' argument is now a synonym for setting
+``-object tls-creds-anon,id=tls0'' combined with
+``-vnc tls-creds=tls0'
-@end itemize
+@subsection -vnc x509 (since 2.5.0)
-Wine can be used to launch the resulting qemu-system-i386.exe
-and all other qemu-system-@var{target}.exe compiled for Win32.
+The ``-vnc x509=/path/to/certs'' argument is now a
+synonym for setting
+``-object tls-creds-x509,dir=/path/to/certs,id=tls0,verify-peer=no''
+combined with ``-vnc tls-creds=tls0'
-@node Mac OS X
-@section Mac OS X
+@subsection -vnc x509verify (since 2.5.0)
-System Requirements:
-@itemize
-@item Mac OS 10.5 or higher
-@item The clang compiler shipped with Xcode 4.2 or higher,
-or GCC 4.3 or higher
-@end itemize
+The ``-vnc x509verify=/path/to/certs'' argument is now a
+synonym for setting
+``-object tls-creds-x509,dir=/path/to/certs,id=tls0,verify-peer=yes''
+combined with ``-vnc tls-creds=tls0'
-Additional Requirements (install in order):
-@enumerate
-@item libffi: @uref{https://sourceware.org/libffi/}
-@item gettext: @uref{http://www.gnu.org/software/gettext/}
-@item glib: @uref{http://ftp.gnome.org/pub/GNOME/sources/glib/}
-@item pkg-config: @uref{http://www.freedesktop.org/wiki/Software/pkg-config/}
-@item autoconf: @uref{http://www.gnu.org/software/autoconf/autoconf.html}
-@item automake: @uref{http://www.gnu.org/software/automake/}
-@item pixman: @uref{http://www.pixman.org/}
-@end enumerate
+@subsection -tftp (since 2.6.0)
-* You may find it easiest to get these from a third-party packager
-such as Homebrew, Macports, or Fink.
+The ``-tftp /some/dir'' argument is now a synonym for setting
+the ``-netdev user,tftp=/some/dir' argument. The new syntax
+allows different settings to be provided per NIC.
-After downloading the QEMU source code, double-click it to expand it.
+@subsection -bootp (since 2.6.0)
-Then configure and make QEMU:
-@example
-./configure
-make
-@end example
+The ``-bootp /some/file'' argument is now a synonym for setting
+the ``-netdev user,bootp=/some/file' argument. The new syntax
+allows different settings to be provided per NIC.
-If you have a recent version of Mac OS X (OSX 10.7 or better
-with Xcode 4.2 or better) we recommend building QEMU with the
-default compiler provided by Apple, for your version of Mac OS X
-(which will be 'clang'). The configure script will
-automatically pick this.
+@subsection -redir (since 2.6.0)
-Note: If after the configure step you see a message like this:
-@example
-ERROR: Your compiler does not support the __thread specifier for
- Thread-Local Storage (TLS). Please upgrade to a version that does.
-@end example
-you may have to build your own version of gcc from source. Expect that to take
-several hours. More information can be found here:
-@uref{https://gcc.gnu.org/install/} @*
+The ``-redir ARGS'' argument is now a synonym for setting
+the ``-netdev user,hostfwd=ARGS'' argument instead. The new
+syntax allows different settings to be provided per NIC.
-These are some of the third party binaries of gcc available for download:
-@itemize
-@item Homebrew: @uref{http://brew.sh/}
-@item @uref{https://www.litebeam.net/gcc/gcc_472.pkg}
-@item @uref{http://www.macports.org/ports.php?by=name&substr=gcc}
-@end itemize
+@subsection -smb (since 2.6.0)
-You can have several versions of GCC on your system. To specify a certain version,
-use the --cc and --cxx options.
-@example
-./configure --cxx=<path of your c++ compiler> --cc=<path of your c compiler> <other options>
-@end example
+The ``-smb /some/dir'' argument is now a synonym for setting
+the ``-netdev user,smb=/some/dir'' argument instead. The new
+syntax allows different settings to be provided per NIC.
-@node Make targets
-@section Make targets
+@subsection -net channel (since 2.6.0)
-@table @code
+The ``--net channel,ARGS'' argument is now a synonym for setting
+the ``-netdev user,guestfwd=ARGS'' argument instead.
-@item make
-@item make all
-Make everything which is typically needed.
+@subsection -net vlan (since 2.9.0)
-@item install
-TODO
+The ``-net vlan=NN'' argument is partially replaced with the
+new ``-netdev'' argument. The remaining use cases will no
+longer be directly supported in QEMU.
-@item install-doc
-TODO
+@subsection -drive if=scsi (since 2.9.0)
-@item make clean
-Remove most files which were built during make.
+The ``-drive if=scsi'' argument is replaced by the the
+``-device BUS-TYPE'' argument combined with ``-drive if=none''.
-@item make distclean
-Remove everything which was built during make.
+@subsection -net dump (since 2.10.0)
-@item make dvi
-@item make html
-@item make info
-@item make pdf
-Create documentation in dvi, html, info or pdf format.
+The ``--net dump'' argument is now replaced with the
+``-object filter-dump'' argument which works in combination
+with the modern ``-netdev`` backends instead.
-@item make cscope
-TODO
+@subsection -hdachs (since 2.10.0)
-@item make defconfig
-(Re-)create some build configuration files.
-User made changes will be overwritten.
+The ``-hdachs'' argument is now a synonym for setting
+the ``cyls'', ``heads'', ``secs'', and ``trans'' properties
+on the ``ide-hd'' device using the ``-device'' argument.
+The new syntax allows different settings to be provided
+per disk.
-@item tar
-@item tarbin
-TODO
+@subsection -usbdevice (since 2.10.0)
-@end table
+The ``-usbdevice DEV'' argument is now a synonym for setting
+the ``-device usb-DEV'' argument instead. The deprecated syntax
+would automatically enable USB support on the machine type.
+If using the new syntax, USB support must be explicitly
+enabled via the ``-machine usb=on'' argument.
+
+@subsection -nodefconfig (since 2.11.0)
+
+The ``-nodefconfig`` argument is a synonym for ``-no-user-config``.
+
+@section qemu-img command line arguments
+
+@subsection convert -s (since 2.0.0)
+
+The ``convert -s snapshot_id_or_name'' argument is obsoleted
+by the ``convert -l snapshot_param'' argument instead.
+
+@section System emulator human monitor commands
+
+@subsection host_net_add (since 2.10.0)
+
+The ``host_net_add'' command is replaced by the ``netdev_add'' command.
+
+@subsection host_net_remove (since 2.10.0)
+
+The ``host_net_remove'' command is replaced by the ``netdev_del'' command.
+
+@subsection usb_add (since 2.10.0)
+
+The ``usb_add'' command is replaced by the ``device_add'' command.
+
+@subsection usb_del (since 2.10.0)
+
+The ``usb_del'' command is replaced by the ``device_del'' command.
+
+@section System emulator devices
+
+@subsection ivshmem (since 2.6.0)
+
+The ``ivshmem'' device type is replaced by either the ``ivshmem-plain''
+or ``ivshmem-doorbell`` device types.
+
+@subsection spapr-pci-vfio-host-bridge (since 2.6.0)
+
+The ``spapr-pci-vfio-host-bridge'' device type is replaced by
+the ``spapr-pci-host-bridge'' device type.
@node License
@appendix License
QEMU is a trademark of Fabrice Bellard.
-QEMU is released under the GNU General Public License (TODO: add link).
-Parts of QEMU have specific licenses, see file LICENSE.
-
-TODO (refer to file LICENSE, include it, include the GPL?)
+QEMU is released under the
+@url{https://www.gnu.org/licenses/gpl-2.0.txt,GNU General Public License},
+version 2. Parts of QEMU have specific licenses, see file
+@url{http://git.qemu.org/?p=qemu.git;a=blob_plain;f=LICENSE,LICENSE}.
@node Index
@appendix Index
projects / mirror_qemu.git / blobdiff