* disk_images_iscsi:: iSCSI LUNs
* disk_images_gluster:: GlusterFS disk images
* disk_images_ssh:: Secure Shell (ssh) disk images
+* disk_images_nvme:: NVMe userspace driver
* disk_image_locking:: Disk image file locking
@end menu
What follows is a list of all features currently marked as
deprecated.
-@section System emulator command line arguments
+@section Build options
+
+@subsection GTK 2.x
-@subsection -drive boot=on|off (since 1.3.0)
+Previously QEMU has supported building against both GTK 2.x
+and 3.x series APIs. Support for the GTK 2.x builds will be
+discontinued, so maintainers should switch to using GTK 3.x,
+which is the default.
-The ``boot=on|off'' option to the ``-drive'' argument is
-ignored. Applications should use the ``bootindex=N'' parameter
-to set an absolute ordering between devices instead.
+@subsection SDL 1.2
+
+Previously QEMU has supported building against both SDL 1.2
+and 2.0 series APIs. Support for the SDL 1.2 builds will be
+discontinued, so maintainers should switch to using SDL 2.0,
+which is the default.
+
+@section System emulator command line arguments
@subsection -tdf (since 1.3.0)
The ``-no-kvm-irqchip'' argument is now a synonym for
setting ``-machine kernel_irqchip=off''.
-@subsection -no-kvm-pit (since 1.3.0)
-
-The ``-no-kvm-pit'' argument is ignored. It is no longer
-possible to disable the KVM PIT directly.
-
@subsection -no-kvm (since 1.3.0)
The ``-no-kvm'' argument is now a synonym for setting
``-machine accel=tcg''.
-@subsection -mon default=on (since 2.4.0)
-
-The ``default'' option to the ``-mon'' argument is
-now ignored. When multiple monitors were enabled, it
-indicated which monitor would receive log messages
-from the various subsystems. This feature is no longer
-required as messages are now only sent to the monitor
-in response to explicitly monitor commands.
-
@subsection -vnc tls (since 2.5.0)
The ``-vnc tls'' argument is now a synonym for setting
@subsection -tftp (since 2.6.0)
-The ``-tftp /some/dir'' argument is now a synonym for setting
-the ``-netdev user,tftp=/some/dir' argument. The new syntax
-allows different settings to be provided per NIC.
+The ``-tftp /some/dir'' argument is replaced by
+``-netdev user,id=x,tftp=/some/dir'', either accompanied with
+``-device ...,netdev=x'' (for pluggable NICs) or ``-net nic,netdev=x''
+(for embedded NICs). The new syntax allows different settings to be
+provided per NIC.
@subsection -bootp (since 2.6.0)
-The ``-bootp /some/file'' argument is now a synonym for setting
-the ``-netdev user,bootp=/some/file' argument. The new syntax
-allows different settings to be provided per NIC.
+The ``-bootp /some/file'' argument is replaced by
+``-netdev user,id=x,bootp=/some/file'', either accompanied with
+``-device ...,netdev=x'' (for pluggable NICs) or ``-net nic,netdev=x''
+(for embedded NICs). The new syntax allows different settings to be
+provided per NIC.
@subsection -redir (since 2.6.0)
-The ``-redir ARGS'' argument is now a synonym for setting
-the ``-netdev user,hostfwd=ARGS'' argument instead. The new
-syntax allows different settings to be provided per NIC.
+The ``-redir [tcp|udp]:hostport:[guestaddr]:guestport'' argument is
+replaced by ``-netdev
+user,id=x,hostfwd=[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport'',
+either accompanied with ``-device ...,netdev=x'' (for pluggable NICs) or
+``-net nic,netdev=x'' (for embedded NICs). The new syntax allows different
+settings to be provided per NIC.
@subsection -smb (since 2.6.0)
-The ``-smb /some/dir'' argument is now a synonym for setting
-the ``-netdev user,smb=/some/dir'' argument instead. The new
-syntax allows different settings to be provided per NIC.
-
-@subsection -net channel (since 2.6.0)
-
-The ``--net channel,ARGS'' argument is now a synonym for setting
-the ``-netdev user,guestfwd=ARGS'' argument instead.
+The ``-smb /some/dir'' argument is replaced by
+``-netdev user,id=x,smb=/some/dir'', either accompanied with
+``-device ...,netdev=x'' (for pluggable NICs) or ``-net nic,netdev=x''
+(for embedded NICs). The new syntax allows different settings to be
+provided per NIC.
@subsection -net vlan (since 2.9.0)
The ``-drive if=scsi'' argument is replaced by the the
``-device BUS-TYPE'' argument combined with ``-drive if=none''.
+@subsection -drive cyls=...,heads=...,secs=...,trans=... (since 2.10.0)
+
+The drive geometry arguments are replaced by the the geometry arguments
+that can be specified with the ``-device'' parameter.
+
+@subsection -drive serial=... (since 2.10.0)
+
+The drive serial argument is replaced by the the serial argument
+that can be specified with the ``-device'' parameter.
+
+@subsection -drive addr=... (since 2.10.0)
+
+The drive addr argument is replaced by the the addr argument
+that can be specified with the ``-device'' parameter.
+
@subsection -net dump (since 2.10.0)
The ``--net dump'' argument is now replaced with the
``-object filter-dump'' argument which works in combination
with the modern ``-netdev`` backends instead.
-@subsection -hdachs (since 2.10.0)
-
-The ``-hdachs'' argument is now a synonym for setting
-the ``cyls'', ``heads'', ``secs'', and ``trans'' properties
-on the ``ide-hd'' device using the ``-device'' argument.
-The new syntax allows different settings to be provided
-per disk.
-
@subsection -usbdevice (since 2.10.0)
The ``-usbdevice DEV'' argument is now a synonym for setting
channel subsystems, all devices can be put into the default channel
subsystem image.
+@subsection -fsdev handle (since 2.12.0)
+
+The ``handle'' fsdev backend does not support symlinks and causes the 9p
+filesystem in the guest to fail a fair amount of tests from the PJD POSIX
+filesystem test suite. Also it requires the CAP_DAC_READ_SEARCH capability,
+which is not the recommended way to run QEMU. This backend should not be
+used and it will be removed with no replacement.
+
+@subsection -no-frame (since 2.12.0)
+
+The ``-no-frame'' argument works with SDL 1.2 only. SDL 2.0 lacks
+support for frameless windows, and the other user interfaces never
+implemented this in the first place. So this will be removed together
+with SDL 1.2 support.
+
@section qemu-img command line arguments
@subsection convert -s (since 2.0.0)
The ``convert -s snapshot_id_or_name'' argument is obsoleted
by the ``convert -l snapshot_param'' argument instead.
+@section QEMU Machine Protocol (QMP) commands
+
+@subsection block-dirty-bitmap-add "autoload" parameter (since 2.12.0)
+
+"autoload" parameter is now ignored. All bitmaps are automatically loaded
+from qcow2 images.
+
@section System emulator human monitor commands
@subsection host_net_add (since 2.10.0)
The ``ivshmem'' device type is replaced by either the ``ivshmem-plain''
or ``ivshmem-doorbell`` device types.
-@subsection spapr-pci-vfio-host-bridge (since 2.6.0)
+@subsection Page size support < 4k for embedded PowerPC CPUs (since 2.12.0)
-The ``spapr-pci-vfio-host-bridge'' device type is replaced by
-the ``spapr-pci-host-bridge'' device type.
+qemu-system-ppcemb will be removed. qemu-system-ppc (or qemu-system-ppc64)
+should be used instead. That means that embedded 4xx PowerPC CPUs will not
+support page sizes < 4096 any longer.
@section System emulator machines
projects / mirror_qemu.git / blobdiff