#include <stdarg.h>
#include <stdio.h>
#include <getopt.h>
-#include <err.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
static NBDExport *exp;
static int verbose;
static char *srcpath;
-static char *sockpath;
+static SocketAddress *saddr;
static int persistent = 0;
static enum { RUNNING, TERMINATE, TERMINATING, TERMINATED } state;
static int shared = 1;
" '[ID_OR_NAME]'\n"
" -n, --nocache disable host cache\n"
" --cache=MODE set cache mode (none, writeback, ...)\n"
-#ifdef CONFIG_LINUX_AIO
" --aio=MODE set AIO mode (native or threads)\n"
-#endif
" --discard=MODE set discard mode (ignore, unmap)\n"
-" --detect-zeroes=MODE set detect-zeroes mode (off, on, discard)\n"
+" --detect-zeroes=MODE set detect-zeroes mode (off, on, unmap)\n"
"\n"
"Report bugs to <qemu-devel@nongnu.org>\n"
, name, NBD_DEFAULT_PORT, "DEVICE");
int ret;
if ((ret = blk_read(blk, 0, data, 1)) < 0) {
- errno = -ret;
- err(EXIT_FAILURE, "error while reading");
+ error_report("error while reading: %s", strerror(-ret));
+ exit(EXIT_FAILURE);
}
if (data[510] != 0x55 || data[511] != 0xaa) {
int j;
if ((ret = blk_read(blk, mbr[i].start_sector_abs, data1, 1)) < 0) {
- errno = -ret;
- err(EXIT_FAILURE, "error while reading");
+ error_report("error while reading: %s", strerror(-ret));
+ exit(EXIT_FAILURE);
}
for (j = 0; j < 4; j++) {
qemu_notify_event();
}
-static void combine_addr(char *buf, size_t len, const char* address,
- uint16_t port)
-{
- /* If the address-part contains a colon, it's an IPv6 IP so needs [] */
- if (strstr(address, ":")) {
- snprintf(buf, len, "[%s]:%u", address, port);
- } else {
- snprintf(buf, len, "%s:%u", address, port);
- }
-}
-
-static int tcp_socket_incoming(const char *address, uint16_t port)
-{
- char address_and_port[128];
- Error *local_err = NULL;
-
- combine_addr(address_and_port, 128, address, port);
- int fd = inet_listen(address_and_port, NULL, 0, SOCK_STREAM, 0, &local_err);
-
- if (local_err != NULL) {
- error_report_err(local_err);
- }
- return fd;
-}
-
-static int unix_socket_incoming(const char *path)
-{
- Error *local_err = NULL;
- int fd = unix_listen(path, NULL, 0, &local_err);
-
- if (local_err != NULL) {
- error_report_err(local_err);
- }
- return fd;
-}
-
-static int unix_socket_outgoing(const char *path)
-{
- Error *local_err = NULL;
- int fd = unix_connect(path, &local_err);
-
- if (local_err != NULL) {
- error_report_err(local_err);
- }
- return fd;
-}
static void *show_parts(void *arg)
{
pthread_t show_parts_thread;
Error *local_error = NULL;
- sock = unix_socket_outgoing(sockpath);
+
+ sock = socket_connect(saddr, &local_error, NULL, NULL);
if (sock < 0) {
+ error_report_err(local_error);
goto out;
}
&size, &local_error);
if (ret < 0) {
if (local_error) {
- fprintf(stderr, "%s\n", error_get_pretty(local_error));
- error_free(local_error);
+ error_report_err(local_error);
}
goto out_socket;
}
fd = open(device, O_RDWR);
if (fd < 0) {
/* Linux-only, we can use %m in printf. */
- fprintf(stderr, "Failed to open %s: %m\n", device);
+ error_report("Failed to open %s: %m", device);
goto out_socket;
}
return;
}
- if (nbd_client_new(exp, fd, nbd_client_closed)) {
- nb_fds++;
- nbd_update_server_fd_handler(server_fd);
- } else {
- shutdown(fd, 2);
- close(fd);
- }
+ nb_fds++;
+ nbd_update_server_fd_handler(server_fd);
+ nbd_client_new(exp, fd, nbd_client_closed);
}
static void nbd_update_server_fd_handler(int fd)
}
}
+
+static SocketAddress *nbd_build_socket_address(const char *sockpath,
+ const char *bindto,
+ const char *port)
+{
+ SocketAddress *saddr;
+
+ saddr = g_new0(SocketAddress, 1);
+ if (sockpath) {
+ saddr->type = SOCKET_ADDRESS_KIND_UNIX;
+ saddr->u.q_unix = g_new0(UnixSocketAddress, 1);
+ saddr->u.q_unix->path = g_strdup(sockpath);
+ } else {
+ saddr->type = SOCKET_ADDRESS_KIND_INET;
+ saddr->u.inet = g_new0(InetSocketAddress, 1);
+ saddr->u.inet->host = g_strdup(bindto);
+ if (port) {
+ saddr->u.inet->port = g_strdup(port);
+ } else {
+ saddr->u.inet->port = g_strdup_printf("%d", NBD_DEFAULT_PORT);
+ }
+ }
+
+ return saddr;
+}
+
+
int main(int argc, char **argv)
{
BlockBackend *blk;
uint32_t nbdflags = 0;
bool disconnect = false;
const char *bindto = "0.0.0.0";
+ const char *port = NULL;
+ char *sockpath = NULL;
char *device = NULL;
- int port = NBD_DEFAULT_PORT;
off_t fd_size;
QemuOpts *sn_opts = NULL;
const char *sn_id_or_name = NULL;
{ "load-snapshot", 1, NULL, 'l' },
{ "nocache", 0, NULL, 'n' },
{ "cache", 1, NULL, QEMU_NBD_OPT_CACHE },
-#ifdef CONFIG_LINUX_AIO
{ "aio", 1, NULL, QEMU_NBD_OPT_AIO },
-#endif
{ "discard", 1, NULL, QEMU_NBD_OPT_DISCARD },
{ "detect-zeroes", 1, NULL, QEMU_NBD_OPT_DETECT_ZEROES },
{ "shared", 1, NULL, 'e' },
};
int ch;
int opt_ind = 0;
- int li;
char *end;
int flags = BDRV_O_RDWR;
int partition = -1;
int fd;
bool seen_cache = false;
bool seen_discard = false;
-#ifdef CONFIG_LINUX_AIO
bool seen_aio = false;
-#endif
pthread_t client_thread;
const char *fmt = NULL;
Error *local_err = NULL;
/* fallthrough */
case QEMU_NBD_OPT_CACHE:
if (seen_cache) {
- errx(EXIT_FAILURE, "-n and --cache can only be specified once");
+ error_report("-n and --cache can only be specified once");
+ exit(EXIT_FAILURE);
}
seen_cache = true;
if (bdrv_parse_cache_flags(optarg, &flags) == -1) {
- errx(EXIT_FAILURE, "Invalid cache mode `%s'", optarg);
+ error_report("Invalid cache mode `%s'", optarg);
+ exit(EXIT_FAILURE);
}
break;
-#ifdef CONFIG_LINUX_AIO
case QEMU_NBD_OPT_AIO:
if (seen_aio) {
- errx(EXIT_FAILURE, "--aio can only be specified once");
+ error_report("--aio can only be specified once");
+ exit(EXIT_FAILURE);
}
seen_aio = true;
if (!strcmp(optarg, "native")) {
} else if (!strcmp(optarg, "threads")) {
/* this is the default */
} else {
- errx(EXIT_FAILURE, "invalid aio mode `%s'", optarg);
+ error_report("invalid aio mode `%s'", optarg);
+ exit(EXIT_FAILURE);
}
break;
-#endif
case QEMU_NBD_OPT_DISCARD:
if (seen_discard) {
- errx(EXIT_FAILURE, "--discard can only be specified once");
+ error_report("--discard can only be specified once");
+ exit(EXIT_FAILURE);
}
seen_discard = true;
if (bdrv_parse_discard_flags(optarg, &flags) == -1) {
- errx(EXIT_FAILURE, "Invalid discard mode `%s'", optarg);
+ error_report("Invalid discard mode `%s'", optarg);
+ exit(EXIT_FAILURE);
}
break;
case QEMU_NBD_OPT_DETECT_ZEROES:
detect_zeroes =
qapi_enum_parse(BlockdevDetectZeroesOptions_lookup,
optarg,
- BLOCKDEV_DETECT_ZEROES_OPTIONS_MAX,
+ BLOCKDEV_DETECT_ZEROES_OPTIONS__MAX,
BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
&local_err);
if (local_err) {
- errx(EXIT_FAILURE, "Failed to parse detect_zeroes mode: %s",
- error_get_pretty(local_err));
+ error_reportf_err(local_err,
+ "Failed to parse detect_zeroes mode: ");
+ exit(EXIT_FAILURE);
}
if (detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP &&
!(flags & BDRV_O_UNMAP)) {
- errx(EXIT_FAILURE, "setting detect-zeroes to unmap is not allowed "
- "without setting discard operation to unmap");
+ error_report("setting detect-zeroes to unmap is not allowed "
+ "without setting discard operation to unmap");
+ exit(EXIT_FAILURE);
}
break;
case 'b':
bindto = optarg;
break;
case 'p':
- li = strtol(optarg, &end, 0);
- if (*end) {
- errx(EXIT_FAILURE, "Invalid port `%s'", optarg);
- }
- if (li < 1 || li > 65535) {
- errx(EXIT_FAILURE, "Port out of range `%s'", optarg);
- }
- port = (uint16_t)li;
+ port = optarg;
break;
case 'o':
dev_offset = strtoll (optarg, &end, 0);
if (*end) {
- errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
+ error_report("Invalid offset `%s'", optarg);
+ exit(EXIT_FAILURE);
}
if (dev_offset < 0) {
- errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
+ error_report("Offset must be positive `%s'", optarg);
+ exit(EXIT_FAILURE);
}
break;
case 'l':
sn_opts = qemu_opts_parse_noisily(&internal_snapshot_opts,
optarg, false);
if (!sn_opts) {
- errx(EXIT_FAILURE, "Failed in parsing snapshot param `%s'",
- optarg);
+ error_report("Failed in parsing snapshot param `%s'",
+ optarg);
+ exit(EXIT_FAILURE);
}
} else {
sn_id_or_name = optarg;
case 'P':
partition = strtol(optarg, &end, 0);
if (*end) {
- errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
+ error_report("Invalid partition `%s'", optarg);
+ exit(EXIT_FAILURE);
}
if (partition < 1 || partition > 8) {
- errx(EXIT_FAILURE, "Invalid partition %d", partition);
+ error_report("Invalid partition %d", partition);
+ exit(EXIT_FAILURE);
}
break;
case 'k':
sockpath = optarg;
if (sockpath[0] != '/') {
- errx(EXIT_FAILURE, "socket path must be absolute\n");
+ error_report("socket path must be absolute");
+ exit(EXIT_FAILURE);
}
break;
case 'd':
case 'e':
shared = strtol(optarg, &end, 0);
if (*end) {
- errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
+ error_report("Invalid shared device number '%s'", optarg);
+ exit(EXIT_FAILURE);
}
if (shared < 1) {
- errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
+ error_report("Shared device number must be greater than 0");
+ exit(EXIT_FAILURE);
}
break;
case 'f':
exit(0);
break;
case '?':
- errx(EXIT_FAILURE, "Try `%s --help' for more information.",
- argv[0]);
+ error_report("Try `%s --help' for more information.", argv[0]);
+ exit(EXIT_FAILURE);
}
}
if ((argc - optind) != 1) {
- errx(EXIT_FAILURE, "Invalid number of argument.\n"
- "Try `%s --help' for more information.",
- argv[0]);
+ error_report("Invalid number of arguments");
+ error_printf("Try `%s --help' for more information.\n", argv[0]);
+ exit(EXIT_FAILURE);
}
if (disconnect) {
fd = open(argv[optind], O_RDWR);
if (fd < 0) {
- err(EXIT_FAILURE, "Cannot open %s", argv[optind]);
+ error_report("Cannot open %s: %s", argv[optind],
+ strerror(errno));
+ exit(EXIT_FAILURE);
}
nbd_disconnect(fd);
int ret;
if (qemu_pipe(stderr_fd) < 0) {
- err(EXIT_FAILURE, "Error setting up communication pipe");
+ error_report("Error setting up communication pipe: %s",
+ strerror(errno));
+ exit(EXIT_FAILURE);
}
/* Now daemonize, but keep a communication channel open to
*/
pid = fork();
if (pid < 0) {
- err(EXIT_FAILURE, "Failed to fork");
+ error_report("Failed to fork: %s", strerror(errno));
+ exit(EXIT_FAILURE);
} else if (pid == 0) {
close(stderr_fd[0]);
ret = qemu_daemon(1, 0);
/* Temporarily redirect stderr to the parent's pipe... */
dup2(stderr_fd[1], STDERR_FILENO);
if (ret < 0) {
- err(EXIT_FAILURE, "Failed to daemonize");
+ error_report("Failed to daemonize: %s", strerror(errno));
+ exit(EXIT_FAILURE);
}
/* ... close the descriptor we inherited and go on. */
}
}
if (ret < 0) {
- err(EXIT_FAILURE, "Cannot read from daemon");
+ error_report("Cannot read from daemon: %s",
+ strerror(errno));
+ exit(EXIT_FAILURE);
}
/* Usually the daemon should not print any message.
snprintf(sockpath, 128, SOCKET_PATH, basename(device));
}
+ saddr = nbd_build_socket_address(sockpath, bindto, port);
+
if (qemu_init_main_loop(&local_err)) {
error_report_err(local_err);
exit(EXIT_FAILURE);
srcpath = argv[optind];
blk = blk_new_open("hda", srcpath, NULL, options, flags, &local_err);
if (!blk) {
- errx(EXIT_FAILURE, "Failed to blk_new_open '%s': %s", argv[optind],
- error_get_pretty(local_err));
+ error_reportf_err(local_err, "Failed to blk_new_open '%s': ",
+ argv[optind]);
+ exit(EXIT_FAILURE);
}
bs = blk_bs(blk);
&local_err);
}
if (ret < 0) {
- errno = -ret;
- err(EXIT_FAILURE,
- "Failed to load snapshot: %s",
- error_get_pretty(local_err));
+ error_reportf_err(local_err, "Failed to load snapshot: ");
+ exit(EXIT_FAILURE);
}
bs->detect_zeroes = detect_zeroes;
fd_size = blk_getlength(blk);
if (fd_size < 0) {
- errx(EXIT_FAILURE, "Failed to determine the image length: %s",
- strerror(-fd_size));
+ error_report("Failed to determine the image length: %s",
+ strerror(-fd_size));
+ exit(EXIT_FAILURE);
}
if (partition != -1) {
ret = find_partition(blk, partition, &dev_offset, &fd_size);
if (ret < 0) {
- errno = -ret;
- err(EXIT_FAILURE, "Could not find partition %d", partition);
+ error_report("Could not find partition %d: %s", partition,
+ strerror(-ret));
+ exit(EXIT_FAILURE);
}
}
exp = nbd_export_new(blk, dev_offset, fd_size, nbdflags, nbd_export_closed,
&local_err);
if (!exp) {
- errx(EXIT_FAILURE, "%s", error_get_pretty(local_err));
- }
-
- if (sockpath) {
- fd = unix_socket_incoming(sockpath);
- } else {
- fd = tcp_socket_incoming(bindto, port);
+ error_report_err(local_err);
+ exit(EXIT_FAILURE);
}
+ fd = socket_listen(saddr, &local_err);
if (fd < 0) {
+ error_report_err(local_err);
return 1;
}
ret = pthread_create(&client_thread, NULL, nbd_client_thread, device);
if (ret != 0) {
- errx(EXIT_FAILURE, "Failed to create client thread: %s",
- strerror(ret));
+ error_report("Failed to create client thread: %s", strerror(ret));
+ exit(EXIT_FAILURE);
}
} else {
/* Shut up GCC warnings. */
/* now when the initialization is (almost) complete, chdir("/")
* to free any busy filesystems */
if (chdir("/") < 0) {
- err(EXIT_FAILURE, "Could not chdir to root directory");
+ error_report("Could not chdir to root directory: %s",
+ strerror(errno));
+ exit(EXIT_FAILURE);
}
state = RUNNING;
projects / mirror_qemu.git / blobdiff