" dump-guest-core=on|off include guest memory in a core dump (default=on)\n"
" mem-merge=on|off controls memory merge support (default: on)\n"
" iommu=on|off controls emulated Intel IOMMU (VT-d) support (default=off)\n"
+ " igd-passthru=on|off controls IGD GFX passthrough support (default=off)\n"
" aes-key-wrap=on|off controls support for AES key wrapping (default=on)\n"
" dea-key-wrap=on|off controls support for DEA key wrapping (default=on)\n"
" suppress-vmdesc=on|off disables self-describing migration (default=off)\n",
to initialize.
@item kernel_irqchip=on|off
Enables in-kernel irqchip support for the chosen accelerator when available.
+@item gfx_passthru=on|off
+Enables IGD GFX passthrough support for the chosen machine when available.
@item vmport=on|off|auto
Enables emulation of VMWare IO port, for vmmouse etc. auto says to select the
value based on accel. For accel=xen the default is off otherwise the default
@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}][,strict=on|off]
@findex -boot
Specify boot order @var{drives} as a string of drive letters. Valid
-drive letters depend on the target achitecture. The x86 PC uses: a, b
+drive letters depend on the target architecture. The x86 PC uses: a, b
(floppy 1 and 2), c (first hard disk), d (first CD-ROM), n-p (Etherboot
from network adapter 1-4), hard disk boot is the default. To apply a
particular boot order only on the first startup, specify it via
specified connections will only be allowed from this host.
As an alternative the Websocket port could be specified by using
@code{websocket}=@var{port}.
-TLS encryption for the Websocket connection is supported if the required
-certificates are specified with the VNC option @option{x509}.
+If no TLS credentials are provided, the websocket connection runs in
+unencrypted mode. If TLS credentials are provided, the websocket connection
+requires encrypted client connections.
@item password
You can also use keywords "now" or "never" for the expiration time to
allow <protocol> password to expire immediately or never expire.
+@item tls-creds=@var{ID}
+
+Provides the ID of a set of TLS credentials to use to secure the
+VNC server. They will apply to both the normal VNC server socket
+and the websocket socket (if enabled). Setting TLS credentials
+will cause the VNC server socket to enable the VeNCrypt auth
+mechanism. The credentials should have been previously created
+using the @option{-object tls-creds} argument.
+
+The @option{tls-creds} parameter obsoletes the @option{tls},
+@option{x509}, and @option{x509verify} options, and as such
+it is not permitted to set both new and old type options at
+the same time.
+
@item tls
Require that client use TLS when communicating with the VNC server. This
attack. It is recommended that this option be combined with either the
@option{x509} or @option{x509verify} options.
+This option is now deprecated in favor of using the @option{tls-creds}
+argument.
+
@item x509=@var{/path/to/certificate/dir}
Valid if @option{tls} is specified. Require that x509 credentials are used
this option specifies where the x509 certificates are to be loaded from.
See the @ref{vnc_security} section for details on generating certificates.
+This option is now deprecated in favour of using the @option{tls-creds}
+argument.
+
@item x509verify=@var{/path/to/certificate/dir}
Valid if @option{tls} is specified. Require that x509 credentials are used
be loaded from. See the @ref{vnc_security} section for details on generating
certificates.
+This option is now deprecated in favour of using the @option{tls-creds}
+argument.
+
@item sasl
Require that the client use SASL to authenticate with the VNC server.
"-smbios type=17[,loc_pfx=str][,bank=str][,manufacturer=str][,serial=str]\n"
" [,asset=str][,part=str][,speed=%d]\n"
" specify SMBIOS type 17 fields\n",
- QEMU_ARCH_I386)
+ QEMU_ARCH_I386 | QEMU_ARCH_ARM)
STEXI
@item -smbios file=@var{binary}
@findex -smbios
Since version Qemu 2.4 it is possible to specify a iSCSI request timeout to detect
stalled requests and force a reestablishment of the session. The timeout
-is specified in seconds. The default is 0 which means no timeout.
+is specified in seconds. The default is 0 which means no timeout. Libiscsi
+1.15.0 or greater is required for this feature.
Example (without authentication):
@example
order cores with complex cache hierarchies. The number of instructions
executed often has little or no correlation with actual performance.
-@option{align=on} will activate the delay algorithm which will try to
+@option{align=on} will activate the delay algorithm which will try
to synchronise the host clock and the virtual clock. The goal is to
have a guest running at the real frequency imposed by the shift option.
Whenever the guest clock is behind the host clock and if
" Output vmstate information in JSON format to file.\n"
" Use the scripts/vmstate-static-checker.py file to\n"
" check for possible regressions in migration code\n"
- " by comparing two such vmstate dumps.",
+ " by comparing two such vmstate dumps.\n",
QEMU_ARCH_ALL)
STEXI
@item -dump-vmstate @var{file}
the unique ID of a character device backend that provides the connection
to the RNG daemon.
+@item -object tls-creds-anon,id=@var{id},endpoint=@var{endpoint},dir=@var{/path/to/cred/dir},verify-peer=@var{on|off}
+
+Creates a TLS anonymous credentials object, which can be used to provide
+TLS support on network backends. The @option{id} parameter is a unique
+ID which network backends will use to access the credentials. The
+@option{endpoint} is either @option{server} or @option{client} depending
+on whether the QEMU network backend that uses the credentials will be
+acting as a client or as a server. If @option{verify-peer} is enabled
+(the default) then once the handshake is completed, the peer credentials
+will be verified, though this is a no-op for anonymous credentials.
+
+The @var{dir} parameter tells QEMU where to find the credential
+files. For server endpoints, this directory may contain a file
+@var{dh-params.pem} providing diffie-hellman parameters to use
+for the TLS server. If the file is missing, QEMU will generate
+a set of DH parameters at startup. This is a computationally
+expensive operation that consumes random pool entropy, so it is
+recommended that a persistent set of parameters be generated
+upfront and saved.
+
+@item -object tls-creds-x509,id=@var{id},endpoint=@var{endpoint},dir=@var{/path/to/cred/dir},verify-peer=@var{on|off}
+
+Creates a TLS anonymous credentials object, which can be used to provide
+TLS support on network backends. The @option{id} parameter is a unique
+ID which network backends will use to access the credentials. The
+@option{endpoint} is either @option{server} or @option{client} depending
+on whether the QEMU network backend that uses the credentials will be
+acting as a client or as a server. If @option{verify-peer} is enabled
+(the default) then once the handshake is completed, the peer credentials
+will be verified. With x509 certificates, this implies that the clients
+must be provided with valid client certificates too.
+
+The @var{dir} parameter tells QEMU where to find the credential
+files. For server endpoints, this directory may contain a file
+@var{dh-params.pem} providing diffie-hellman parameters to use
+for the TLS server. If the file is missing, QEMU will generate
+a set of DH parameters at startup. This is a computationally
+expensive operation that consumes random pool entropy, so it is
+recommended that a persistent set of parameters be generated
+upfront and saved.
+
+For x509 certificate credentials the directory will contain further files
+providing the x509 certificates. The certificates must be stored
+in PEM format, in filenames @var{ca-cert.pem}, @var{ca-crl.pem} (optional),
+@var{server-cert.pem} (only servers), @var{server-key.pem} (only servers),
+@var{client-cert.pem} (only clients), and @var{client-key.pem} (only clients).
+
+@item -object filter-buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue=@var{all|rx|tx}]
+
+Interval @var{t} can't be 0, this filter batches the packet delivery: all
+packets arriving in a given interval on netdev @var{netdevid} are delayed
+until the end of the interval. Interval is in microseconds.
+
+queue @var{all|rx|tx} is an option that can be applied to any netfilter.
+
+@option{all}: the filter is attached both to the receive and the transmit
+ queue of the netdev (default).
+
+@option{rx}: the filter is attached to the receive queue of the netdev,
+ where it will receive packets sent to the netdev.
+
+@option{tx}: the filter is attached to the transmit queue of the netdev,
+ where it will receive packets sent by the netdev.
+
@end table
ETEXI
projects / mirror_qemu.git / blobdiff