ETEXI
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
- "-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
+ "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
" set the number of CPUs to 'n' [default=1]\n"
" maxcpus= maximum number of total cpus, including\n"
" offline CPUs for hotplug, etc\n"
" sockets= number of discrete sockets in the system\n",
QEMU_ARCH_ALL)
STEXI
-@item -smp @var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
+@item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
@findex -smp
Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255
CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs
are split equally.
ETEXI
-DEF("fda", HAS_ARG, QEMU_OPTION_fda,
- "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
-DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
-STEXI
-@item -fda @var{file}
-@item -fdb @var{file}
-@findex -fda
-@findex -fdb
-Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can
-use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}).
-ETEXI
-
-DEF("hda", HAS_ARG, QEMU_OPTION_hda,
- "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL)
-DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL)
-DEF("hdc", HAS_ARG, QEMU_OPTION_hdc,
- "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL)
-DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL)
-STEXI
-@item -hda @var{file}
-@item -hdb @var{file}
-@item -hdc @var{file}
-@item -hdd @var{file}
-@findex -hda
-@findex -hdb
-@findex -hdc
-@findex -hdd
-Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}).
-ETEXI
-
-DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom,
- "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -cdrom @var{file}
-@findex -cdrom
-Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and
-@option{-cdrom} at the same time). You can use the host CD-ROM by
-using @file{/dev/cdrom} as filename (@pxref{host_drives}).
-ETEXI
-
-DEF("drive", HAS_ARG, QEMU_OPTION_drive,
- "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
- " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
- " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
- " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
- " [,readonly=on|off][,copy-on-read=on|off]\n"
- " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]\n"
- " use 'file' as a drive image\n", QEMU_ARCH_ALL)
-STEXI
-@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
-@findex -drive
-
-Define a new drive. Valid options are:
-
-@table @option
-@item file=@var{file}
-This option defines which disk image (@pxref{disk_images}) to use with
-this drive. If the filename contains comma, you must double it
-(for instance, "file=my,,file" to use file "my,file").
-
-Special files such as iSCSI devices can be specified using protocol
-specific URLs. See the section for "Device URL Syntax" for more information.
-@item if=@var{interface}
-This option defines on which type on interface the drive is connected.
-Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio.
-@item bus=@var{bus},unit=@var{unit}
-These options define where is connected the drive by defining the bus number and
-the unit id.
-@item index=@var{index}
-This option defines where is connected the drive by using an index in the list
-of available connectors of a given interface type.
-@item media=@var{media}
-This option defines the type of the media: disk or cdrom.
-@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
-These options have the same definition as they have in @option{-hdachs}.
-@item snapshot=@var{snapshot}
-@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
-@item cache=@var{cache}
-@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
-@item aio=@var{aio}
-@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO.
-@item format=@var{format}
-Specify which disk @var{format} will be used rather than detecting
-the format. Can be used to specifiy format=raw to avoid interpreting
-an untrusted format header.
-@item serial=@var{serial}
-This option specifies the serial number to assign to the device.
-@item addr=@var{addr}
-Specify the controller's PCI address (if=virtio only).
-@item werror=@var{action},rerror=@var{action}
-Specify which @var{action} to take on write and read errors. Valid actions are:
-"ignore" (ignore the error and try to continue), "stop" (pause QEMU),
-"report" (report the error to the guest), "enospc" (pause QEMU only if the
-host disk is full; report the error to the guest otherwise).
-The default setting is @option{werror=enospc} and @option{rerror=report}.
-@item readonly
-Open drive @option{file} as read-only. Guest write attempts will fail.
-@item copy-on-read=@var{copy-on-read}
-@var{copy-on-read} is "on" or "off" and enables whether to copy read backing
-file sectors into the image file.
-@end table
-
-By default, the @option{cache=writeback} mode is used. It will report data
-writes as completed as soon as the data is present in the host page cache.
-This is safe as long as your guest OS makes sure to correctly flush disk caches
-where needed. If your guest OS does not handle volatile disk write caches
-correctly and your host crashes or loses power, then the guest may experience
-data corruption.
-
-For such guests, you should consider using @option{cache=writethrough}. This
-means that the host page cache will be used to read and write data, but write
-notification will be sent to the guest only after QEMU has made sure to flush
-each write to the disk. Be aware that this has a major impact on performance.
-
-The host page cache can be avoided entirely with @option{cache=none}. This will
-attempt to do disk IO directly to the guest's memory. QEMU may still perform
-an internal copy of the data. Note that this is considered a writeback mode and
-the guest OS must handle the disk write cache correctly in order to avoid data
-corruption on host crashes.
-
-The host page cache can be avoided while only sending write notifications to
-the guest when the data has been flushed to the disk using
-@option{cache=directsync}.
-
-In case you don't care about data integrity over host failures, use
-@option{cache=unsafe}. This option tells QEMU that it never needs to write any
-data to the disk but can instead keep things in cache. If anything goes wrong,
-like your host losing power, the disk storage getting disconnected accidentally,
-etc. your image will most probably be rendered unusable. When using
-the @option{-snapshot} option, unsafe caching is always used.
-
-Copy-on-read avoids accessing the same backing file sectors repeatedly and is
-useful when the backing file is over a slow network. By default copy-on-read
-is off.
-
-Instead of @option{-cdrom} you can use:
-@example
-qemu-system-i386 -drive file=file,index=2,media=cdrom
-@end example
-
-Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can
-use:
-@example
-qemu-system-i386 -drive file=file,index=0,media=disk
-qemu-system-i386 -drive file=file,index=1,media=disk
-qemu-system-i386 -drive file=file,index=2,media=disk
-qemu-system-i386 -drive file=file,index=3,media=disk
-@end example
-
-You can open an image using pre-opened file descriptors from an fd set:
-@example
-qemu-system-i386
--add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
--add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
--drive file=/dev/fdset/2,index=0,media=disk
-@end example
-
-You can connect a CDROM to the slave of ide0:
-@example
-qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom
-@end example
-
-If you don't specify the "file=" argument, you define an empty drive:
-@example
-qemu-system-i386 -drive if=ide,index=1,media=cdrom
-@end example
-
-You can connect a SCSI disk with unit ID 6 on the bus #0:
-@example
-qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6
-@end example
-
-Instead of @option{-fda}, @option{-fdb}, you can use:
-@example
-qemu-system-i386 -drive file=file,index=0,if=floppy
-qemu-system-i386 -drive file=file,index=1,if=floppy
-@end example
-
-By default, @var{interface} is "ide" and @var{index} is automatically
-incremented:
-@example
-qemu-system-i386 -drive file=a -drive file=b"
-@end example
-is interpreted like:
-@example
-qemu-system-i386 -hda a -hdb b
-@end example
-ETEXI
-
DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
"-add-fd fd=fd,set=set[,opaque=opaque]\n"
" Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
" set <arg> parameter for item <id> of type <group>\n"
" i.e. -set drive.$id.file=/path/to/image\n", QEMU_ARCH_ALL)
STEXI
-@item -set
+@item -set @var{group}.@var{id}.@var{arg}=@var{value}
@findex -set
-TODO
+Set parameter @var{arg} for item @var{id} of type @var{group}\n"
ETEXI
DEF("global", HAS_ARG, QEMU_OPTION_global,
created automatically and set properties on it, use -@option{device}.
ETEXI
-DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock,
- "-mtdblock file use 'file' as on-board Flash memory image\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -mtdblock @var{file}
-@findex -mtdblock
-Use @var{file} as on-board Flash memory image.
-ETEXI
-
-DEF("sd", HAS_ARG, QEMU_OPTION_sd,
- "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL)
-STEXI
-@item -sd @var{file}
-@findex -sd
-Use @var{file} as SecureDigital card image.
-ETEXI
-
-DEF("pflash", HAS_ARG, QEMU_OPTION_pflash,
- "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL)
-STEXI
-@item -pflash @var{file}
-@findex -pflash
-Use @var{file} as a parallel flash image.
-ETEXI
-
DEF("boot", HAS_ARG, QEMU_OPTION_boot,
"-boot [order=drives][,once=drives][,menu=on|off]\n"
- " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time]\n"
+ " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time][,strict=on|off]\n"
" 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n"
" 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on\n"
" 'sp_time': the period that splash picture last if menu=on, unit is ms\n"
" 'rb_timeout': the timeout before guest reboot when boot failed, unit is ms\n",
QEMU_ARCH_ALL)
STEXI
-@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}]
+@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}][,strict=on|off]
@findex -boot
Specify boot order @var{drives} as a string of drive letters. Valid
drive letters depend on the target achitecture. The x86 PC uses: a, b
reboot, qemu passes '-1' to bios by default. Currently Seabios for X86
system support it.
+Do strict boot via @option{strict=on} as far as firmware/BIOS
+supports it. This only effects when boot priority is changed by
+bootindex options. The default is non-strict boot.
+
@example
# try to boot from network first, then from hard disk
qemu-system-i386 -boot order=nc
use is discouraged as it may be removed from future versions.
ETEXI
-DEF("snapshot", 0, QEMU_OPTION_snapshot,
- "-snapshot write to temporary files instead of disk image files\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -snapshot
-@findex -snapshot
-Write to temporary files instead of disk image files. In this case,
-the raw disk image you use is not written back. You can however force
-the write back by pressing @key{C-a s} (@pxref{disk_images}).
-ETEXI
-
DEF("m", HAS_ARG, QEMU_OPTION_m,
- "-m megs set virtual RAM size to megs MB [default="
- stringify(DEFAULT_RAM_SIZE) "]\n", QEMU_ARCH_ALL)
+ "-m [size=]megs\n"
+ " configure guest RAM\n"
+ " size: initial amount of guest memory (default: "
+ stringify(DEFAULT_RAM_SIZE) "MiB)\n",
+ QEMU_ARCH_ALL)
STEXI
-@item -m @var{megs}
+@item -m [size=]@var{megs}
@findex -m
Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB. Optionally,
a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or
Allocate guest RAM from a temporarily created file in @var{path}.
ETEXI
-#ifdef MAP_POPULATE
DEF("mem-prealloc", 0, QEMU_OPTION_mem_prealloc,
"-mem-prealloc preallocate guest memory (use with -mem-path)\n",
QEMU_ARCH_ALL)
@findex -mem-prealloc
Preallocate memory when using -mem-path.
ETEXI
-#endif
DEF("k", HAS_ARG, QEMU_OPTION_k,
"-k language use keyboard layout (for example 'fr' for French)\n",
@var{addr}.
ETEXI
+DEF("device", HAS_ARG, QEMU_OPTION_device,
+ "-device driver[,prop[=value][,...]]\n"
+ " add device (based on driver)\n"
+ " prop=value,... sets driver properties\n"
+ " use '-device help' to print all possible drivers\n"
+ " use '-device driver,help' to print all possible properties\n",
+ QEMU_ARCH_ALL)
STEXI
-@end table
+@item -device @var{driver}[,@var{prop}[=@var{value}][,...]]
+@findex -device
+Add device @var{driver}. @var{prop}=@var{value} sets driver
+properties. Valid properties depend on the driver. To get help on
+possible drivers and properties, use @code{-device help} and
+@code{-device @var{driver},help}.
ETEXI
-DEF("usb", 0, QEMU_OPTION_usb,
- "-usb enable the USB driver (will be the default soon)\n",
+DEF("name", HAS_ARG, QEMU_OPTION_name,
+ "-name string1[,process=string2][,debug-threads=on|off]\n"
+ " set the name of the guest\n"
+ " string1 sets the window title and string2 the process name (on Linux)\n"
+ " When debug-threads is enabled, individual threads are given a separate name (on Linux)\n"
+ " NOTE: The thread names are for debugging and not a stable API.\n",
QEMU_ARCH_ALL)
STEXI
-USB options:
+@item -name @var{name}
+@findex -name
+Sets the @var{name} of the guest.
+This name will be displayed in the SDL window caption.
+The @var{name} will also be used for the VNC server.
+Also optionally set the top visible process name in Linux.
+Naming of individual threads can also be enabled on Linux to aid debugging.
+ETEXI
+
+DEF("uuid", HAS_ARG, QEMU_OPTION_uuid,
+ "-uuid %08x-%04x-%04x-%04x-%012x\n"
+ " specify machine UUID\n", QEMU_ARCH_ALL)
+STEXI
+@item -uuid @var{uuid}
+@findex -uuid
+Set system UUID.
+ETEXI
+
+STEXI
+@end table
+ETEXI
+DEFHEADING()
+
+DEFHEADING(Block device options:)
+STEXI
@table @option
+ETEXI
-@item -usb
-@findex -usb
-Enable the USB driver (will be the default soon)
+DEF("fda", HAS_ARG, QEMU_OPTION_fda,
+ "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
+DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
+STEXI
+@item -fda @var{file}
+@item -fdb @var{file}
+@findex -fda
+@findex -fdb
+Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can
+use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}).
ETEXI
-DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice,
- "-usbdevice name add the host or guest USB device 'name'\n",
+DEF("hda", HAS_ARG, QEMU_OPTION_hda,
+ "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL)
+DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL)
+DEF("hdc", HAS_ARG, QEMU_OPTION_hdc,
+ "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL)
+DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL)
+STEXI
+@item -hda @var{file}
+@item -hdb @var{file}
+@item -hdc @var{file}
+@item -hdd @var{file}
+@findex -hda
+@findex -hdb
+@findex -hdc
+@findex -hdd
+Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}).
+ETEXI
+
+DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom,
+ "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n",
QEMU_ARCH_ALL)
STEXI
+@item -cdrom @var{file}
+@findex -cdrom
+Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and
+@option{-cdrom} at the same time). You can use the host CD-ROM by
+using @file{/dev/cdrom} as filename (@pxref{host_drives}).
+ETEXI
-@item -usbdevice @var{devname}
-@findex -usbdevice
-Add the USB device @var{devname}. @xref{usb_devices}.
+DEF("drive", HAS_ARG, QEMU_OPTION_drive,
+ "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
+ " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
+ " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
+ " [,serial=s][,addr=A][,rerror=ignore|stop|report]\n"
+ " [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]\n"
+ " [,readonly=on|off][,copy-on-read=on|off]\n"
+ " [,detect-zeroes=on|off|unmap]\n"
+ " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]]\n"
+ " [[,iops=i]|[[,iops_rd=r][,iops_wr=w]]]\n"
+ " [[,bps_max=bm]|[[,bps_rd_max=rm][,bps_wr_max=wm]]]\n"
+ " [[,iops_max=im]|[[,iops_rd_max=irm][,iops_wr_max=iwm]]]\n"
+ " [[,iops_size=is]]\n"
+ " use 'file' as a drive image\n", QEMU_ARCH_ALL)
+STEXI
+@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
+@findex -drive
+
+Define a new drive. Valid options are:
@table @option
+@item file=@var{file}
+This option defines which disk image (@pxref{disk_images}) to use with
+this drive. If the filename contains comma, you must double it
+(for instance, "file=my,,file" to use file "my,file").
-@item mouse
-Virtual Mouse. This will override the PS/2 mouse emulation when activated.
+Special files such as iSCSI devices can be specified using protocol
+specific URLs. See the section for "Device URL Syntax" for more information.
+@item if=@var{interface}
+This option defines on which type on interface the drive is connected.
+Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio.
+@item bus=@var{bus},unit=@var{unit}
+These options define where is connected the drive by defining the bus number and
+the unit id.
+@item index=@var{index}
+This option defines where is connected the drive by using an index in the list
+of available connectors of a given interface type.
+@item media=@var{media}
+This option defines the type of the media: disk or cdrom.
+@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
+These options have the same definition as they have in @option{-hdachs}.
+@item snapshot=@var{snapshot}
+@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
+(see @option{-snapshot}).
+@item cache=@var{cache}
+@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
+@item aio=@var{aio}
+@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO.
+@item discard=@var{discard}
+@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap}) requests are ignored or passed to the filesystem. Some machine types may not support discard requests.
+@item format=@var{format}
+Specify which disk @var{format} will be used rather than detecting
+the format. Can be used to specifiy format=raw to avoid interpreting
+an untrusted format header.
+@item serial=@var{serial}
+This option specifies the serial number to assign to the device.
+@item addr=@var{addr}
+Specify the controller's PCI address (if=virtio only).
+@item werror=@var{action},rerror=@var{action}
+Specify which @var{action} to take on write and read errors. Valid actions are:
+"ignore" (ignore the error and try to continue), "stop" (pause QEMU),
+"report" (report the error to the guest), "enospc" (pause QEMU only if the
+host disk is full; report the error to the guest otherwise).
+The default setting is @option{werror=enospc} and @option{rerror=report}.
+@item readonly
+Open drive @option{file} as read-only. Guest write attempts will fail.
+@item copy-on-read=@var{copy-on-read}
+@var{copy-on-read} is "on" or "off" and enables whether to copy read backing
+file sectors into the image file.
+@item detect-zeroes=@var{detect-zeroes}
+@var{detect-zeroes} is "off", "on" or "unmap" and enables the automatic
+conversion of plain zero writes by the OS to driver specific optimized
+zero write commands. You may even choose "unmap" if @var{discard} is set
+to "unmap" to allow a zero write to be converted to an UNMAP operation.
+@end table
-@item tablet
-Pointer device that uses absolute coordinates (like a touchscreen). This
-means QEMU is able to report the mouse position without having to grab the
-mouse. Also overrides the PS/2 mouse emulation when activated.
+By default, the @option{cache=writeback} mode is used. It will report data
+writes as completed as soon as the data is present in the host page cache.
+This is safe as long as your guest OS makes sure to correctly flush disk caches
+where needed. If your guest OS does not handle volatile disk write caches
+correctly and your host crashes or loses power, then the guest may experience
+data corruption.
-@item disk:[format=@var{format}]:@var{file}
-Mass storage device based on file. The optional @var{format} argument
-will be used rather than detecting the format. Can be used to specifiy
-@code{format=raw} to avoid interpreting an untrusted format header.
+For such guests, you should consider using @option{cache=writethrough}. This
+means that the host page cache will be used to read and write data, but write
+notification will be sent to the guest only after QEMU has made sure to flush
+each write to the disk. Be aware that this has a major impact on performance.
-@item host:@var{bus}.@var{addr}
-Pass through the host device identified by @var{bus}.@var{addr} (Linux only).
+The host page cache can be avoided entirely with @option{cache=none}. This will
+attempt to do disk IO directly to the guest's memory. QEMU may still perform
+an internal copy of the data. Note that this is considered a writeback mode and
+the guest OS must handle the disk write cache correctly in order to avoid data
+corruption on host crashes.
-@item host:@var{vendor_id}:@var{product_id}
-Pass through the host device identified by @var{vendor_id}:@var{product_id}
-(Linux only).
+The host page cache can be avoided while only sending write notifications to
+the guest when the data has been flushed to the disk using
+@option{cache=directsync}.
-@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev}
-Serial converter to host character device @var{dev}, see @code{-serial} for the
-available devices.
+In case you don't care about data integrity over host failures, use
+@option{cache=unsafe}. This option tells QEMU that it never needs to write any
+data to the disk but can instead keep things in cache. If anything goes wrong,
+like your host losing power, the disk storage getting disconnected accidentally,
+etc. your image will most probably be rendered unusable. When using
+the @option{-snapshot} option, unsafe caching is always used.
-@item braille
-Braille device. This will use BrlAPI to display the braille output on a real
-or fake device.
+Copy-on-read avoids accessing the same backing file sectors repeatedly and is
+useful when the backing file is over a slow network. By default copy-on-read
+is off.
-@item net:@var{options}
-Network adapter that supports CDC ethernet and RNDIS protocols.
+Instead of @option{-cdrom} you can use:
+@example
+qemu-system-i386 -drive file=file,index=2,media=cdrom
+@end example
+
+Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can
+use:
+@example
+qemu-system-i386 -drive file=file,index=0,media=disk
+qemu-system-i386 -drive file=file,index=1,media=disk
+qemu-system-i386 -drive file=file,index=2,media=disk
+qemu-system-i386 -drive file=file,index=3,media=disk
+@end example
+
+You can open an image using pre-opened file descriptors from an fd set:
+@example
+qemu-system-i386
+-add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
+-add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
+-drive file=/dev/fdset/2,index=0,media=disk
+@end example
+
+You can connect a CDROM to the slave of ide0:
+@example
+qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom
+@end example
+
+If you don't specify the "file=" argument, you define an empty drive:
+@example
+qemu-system-i386 -drive if=ide,index=1,media=cdrom
+@end example
+
+You can connect a SCSI disk with unit ID 6 on the bus #0:
+@example
+qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6
+@end example
+
+Instead of @option{-fda}, @option{-fdb}, you can use:
+@example
+qemu-system-i386 -drive file=file,index=0,if=floppy
+qemu-system-i386 -drive file=file,index=1,if=floppy
+@end example
+
+By default, @var{interface} is "ide" and @var{index} is automatically
+incremented:
+@example
+qemu-system-i386 -drive file=a -drive file=b"
+@end example
+is interpreted like:
+@example
+qemu-system-i386 -hda a -hdb b
+@end example
+ETEXI
+
+DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock,
+ "-mtdblock file use 'file' as on-board Flash memory image\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -mtdblock @var{file}
+@findex -mtdblock
+Use @var{file} as on-board Flash memory image.
+ETEXI
+
+DEF("sd", HAS_ARG, QEMU_OPTION_sd,
+ "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL)
+STEXI
+@item -sd @var{file}
+@findex -sd
+Use @var{file} as SecureDigital card image.
+ETEXI
-@end table
+DEF("pflash", HAS_ARG, QEMU_OPTION_pflash,
+ "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL)
+STEXI
+@item -pflash @var{file}
+@findex -pflash
+Use @var{file} as a parallel flash image.
ETEXI
-DEF("device", HAS_ARG, QEMU_OPTION_device,
- "-device driver[,prop[=value][,...]]\n"
- " add device (based on driver)\n"
- " prop=value,... sets driver properties\n"
- " use '-device help' to print all possible drivers\n"
- " use '-device driver,help' to print all possible properties\n",
+DEF("snapshot", 0, QEMU_OPTION_snapshot,
+ "-snapshot write to temporary files instead of disk image files\n",
QEMU_ARCH_ALL)
STEXI
-@item -device @var{driver}[,@var{prop}[=@var{value}][,...]]
-@findex -device
-Add device @var{driver}. @var{prop}=@var{value} sets driver
-properties. Valid properties depend on the driver. To get help on
-possible drivers and properties, use @code{-device help} and
-@code{-device @var{driver},help}.
+@item -snapshot
+@findex -snapshot
+Write to temporary files instead of disk image files. In this case,
+the raw disk image you use is not written back. You can however force
+the write back by pressing @key{C-a s} (@pxref{disk_images}).
ETEXI
-DEFHEADING()
-
-DEFHEADING(File system options:)
+DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \
+ "-hdachs c,h,s[,t]\n" \
+ " force hard disk 0 physical geometry and the optional BIOS\n" \
+ " translation (t=none or lba) (usually QEMU can guess them)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -hdachs @var{c},@var{h},@var{s},[,@var{t}]
+@findex -hdachs
+Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
+@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
+translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
+all those parameters. This option is useful for old MS-DOS disk
+images.
+ETEXI
DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
"-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n"
ETEXI
-DEFHEADING()
-
-DEFHEADING(Virtual File system pass-through options:)
-
DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs,
"-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n"
" [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n",
Create synthetic file system image
ETEXI
+STEXI
+@end table
+ETEXI
DEFHEADING()
-DEF("name", HAS_ARG, QEMU_OPTION_name,
- "-name string1[,process=string2]\n"
- " set the name of the guest\n"
- " string1 sets the window title and string2 the process name (on Linux)\n",
- QEMU_ARCH_ALL)
+DEFHEADING(USB options:)
STEXI
-@item -name @var{name}
-@findex -name
-Sets the @var{name} of the guest.
-This name will be displayed in the SDL window caption.
-The @var{name} will also be used for the VNC server.
-Also optionally set the top visible process name in Linux.
+@table @option
ETEXI
-DEF("uuid", HAS_ARG, QEMU_OPTION_uuid,
- "-uuid %08x-%04x-%04x-%04x-%012x\n"
- " specify machine UUID\n", QEMU_ARCH_ALL)
+DEF("usb", 0, QEMU_OPTION_usb,
+ "-usb enable the USB driver (will be the default soon)\n",
+ QEMU_ARCH_ALL)
STEXI
-@item -uuid @var{uuid}
-@findex -uuid
-Set system UUID.
+@item -usb
+@findex -usb
+Enable the USB driver (will be the default soon)
ETEXI
+DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice,
+ "-usbdevice name add the host or guest USB device 'name'\n",
+ QEMU_ARCH_ALL)
STEXI
+
+@item -usbdevice @var{devname}
+@findex -usbdevice
+Add the USB device @var{devname}. @xref{usb_devices}.
+
+@table @option
+
+@item mouse
+Virtual Mouse. This will override the PS/2 mouse emulation when activated.
+
+@item tablet
+Pointer device that uses absolute coordinates (like a touchscreen). This
+means QEMU is able to report the mouse position without having to grab the
+mouse. Also overrides the PS/2 mouse emulation when activated.
+
+@item disk:[format=@var{format}]:@var{file}
+Mass storage device based on file. The optional @var{format} argument
+will be used rather than detecting the format. Can be used to specifiy
+@code{format=raw} to avoid interpreting an untrusted format header.
+
+@item host:@var{bus}.@var{addr}
+Pass through the host device identified by @var{bus}.@var{addr} (Linux only).
+
+@item host:@var{vendor_id}:@var{product_id}
+Pass through the host device identified by @var{vendor_id}:@var{product_id}
+(Linux only).
+
+@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev}
+Serial converter to host character device @var{dev}, see @code{-serial} for the
+available devices.
+
+@item braille
+Braille device. This will use BrlAPI to display the braille output on a real
+or fake device.
+
+@item net:@var{options}
+Network adapter that supports CDC ethernet and RNDIS protocols.
+
@end table
ETEXI
+STEXI
+@end table
+ETEXI
DEFHEADING()
DEFHEADING(Display options:)
-
STEXI
@table @option
ETEXI
DEF("display", HAS_ARG, QEMU_OPTION_display,
"-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n"
" [,window_close=on|off]|curses|none|\n"
+ " gtk[,grab_on_hover=on|off]|\n"
" vnc=<display>[,<optargs>]\n"
" select display type\n", QEMU_ARCH_ALL)
STEXI
user. This option differs from the -nographic option in that it
only affects what is done with video output; -nographic also changes
the destination of the serial and parallel port data.
+@item gtk
+Display video output in a GTK window. This interface provides drop-down
+menus and other UI elements to configure and control the VM during
+runtime.
@item vnc
Start a VNC server on display <arg>
@end table
Normally, QEMU uses SDL to display the VGA output. With this option,
you can totally disable graphical output so that QEMU is a simple
command line application. The emulated serial port is redirected on
-the console. Therefore, you can still use QEMU to debug a Linux kernel
-with a serial console.
+the console and muxed with the monitor (unless redirected elsewhere
+explicitly). Therefore, you can still use QEMU to debug a Linux kernel
+with a serial console. Use @key{C-a h} for help on switching between
+the console and monitor.
ETEXI
DEF("curses", 0, QEMU_OPTION_curses,
" [,jpeg-wan-compression=[auto|never|always]]\n"
" [,zlib-glz-wan-compression=[auto|never|always]]\n"
" [,streaming-video=[off|all|filter]][,disable-copy-paste]\n"
- " [,agent-mouse=[on|off]][,playback-compression=[on|off]]\n"
- " [,seamless-migration=[on|off]]\n"
+ " [,disable-agent-file-xfer][,agent-mouse=[on|off]]\n"
+ " [,playback-compression=[on|off]][,seamless-migration=[on|off]]\n"
" enable spice\n"
" at least one of {port, tls-port} is mandatory\n",
QEMU_ARCH_ALL)
@item disable-copy-paste
Disable copy paste between the client and the guest.
+@item disable-agent-file-xfer
+Disable spice-vdagent based file-xfer between the client and the guest.
+
@item tls-port=<nr>
Set the TCP port spice is listening on for encrypted channels.
"-rotate <deg> rotate graphical output some deg left (only PXA LCD)\n",
QEMU_ARCH_ALL)
STEXI
-@item -rotate
+@item -rotate @var{deg}
@findex -rotate
Rotate graphical output some deg left (only PXA LCD).
ETEXI
DEF("vga", HAS_ARG, QEMU_OPTION_vga,
- "-vga [std|cirrus|vmware|qxl|xenfb|none]\n"
+ "-vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|none]\n"
" select video card type\n", QEMU_ARCH_ALL)
STEXI
@item -vga @var{type}
QXL paravirtual graphic card. It is VGA compatible (including VESA
2.0 VBE support). Works best with qxl guest drivers installed though.
Recommended choice when using the spice protocol.
+@item tcx
+(sun4m only) Sun TCX framebuffer. This is the default framebuffer for
+sun4m machines and offers both 8-bit and 24-bit colour depths at a
+fixed resolution of 1024x768.
+@item cg3
+(sun4m only) Sun cgthree framebuffer. This is a simple 8-bit framebuffer
+for sun4m machines available in both 1024x768 (OpenBIOS) and 1152x900 (OBP)
+resolutions aimed at people wishing to run older Solaris versions.
@item none
Disable VGA card.
@end table
@item websocket
Opens an additional TCP listening port dedicated to VNC Websocket connections.
-By defintion the Websocket port is 5700+@var{display}. If @var{host} is
+By definition the Websocket port is 5700+@var{display}. If @var{host} is
specified connections will only be allowed from this host.
As an alternative the Websocket port could be specified by using
@code{websocket}=@var{port}.
+TLS encryption for the Websocket connection is supported if the required
+certificates are specified with the VNC option @option{x509}.
@item password
An adaptive encoding will try to detect frequently updated screen regions,
and send updates in these regions using a lossy encoding (like JPEG).
This can be really helpful to save bandwidth when playing videos. Disabling
-adaptive encodings allows to restore the original static behavior of encodings
+adaptive encodings restores the original static behavior of encodings
like Tight.
@item share=[allow-exclusive|force-shared|ignore]
STEXI
@end table
ETEXI
-
ARCHHEADING(, QEMU_ARCH_I386)
ARCHHEADING(i386 target only:, QEMU_ARCH_I386)
STEXI
@item -no-fd-bootchk
@findex -no-fd-bootchk
-Disable boot signature checking for floppy disks in Bochs BIOS. It may
+Disable boot signature checking for floppy disks in BIOS. May
be needed to boot from old floppy disks.
-TODO: check reference to Bochs BIOS.
ETEXI
DEF("no-acpi", 0, QEMU_OPTION_no_acpi,
DEF("smbios", HAS_ARG, QEMU_OPTION_smbios,
"-smbios file=binary\n"
" load SMBIOS entry from binary file\n"
- "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]\n"
+ "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d][,uefi=on|off]\n"
" specify SMBIOS type 0 fields\n"
"-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]\n"
" [,uuid=uuid][,sku=str][,family=str]\n"
@findex -smbios
Load SMBIOS entry from binary file.
-@item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}]
+@item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}][,uefi=on|off]
Specify SMBIOS type 0 fields
@item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}] [,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}] [,family=@var{str}]
Specify SMBIOS type 1 fields
ETEXI
-DEFHEADING()
STEXI
@end table
ETEXI
+DEFHEADING()
DEFHEADING(Network options:)
STEXI
"-net tap[,vlan=n][,name=str],ifname=name\n"
" connect the host TAP network interface to VLAN 'n'\n"
#else
- "-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]\n"
+ "-net tap[,vlan=n][,name=str][,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostfds=x:y:...:z][,vhostforce=on|off][,queues=n]\n"
" connect the host TAP network interface to VLAN 'n'\n"
" use network scripts 'file' (default=" DEFAULT_NETWORK_SCRIPT ")\n"
" to configure it and 'dfile' (default=" DEFAULT_NETWORK_DOWN_SCRIPT ")\n"
" use network helper 'helper' (default=" DEFAULT_BRIDGE_HELPER ") to\n"
" configure it\n"
" use 'fd=h' to connect to an already opened TAP interface\n"
+ " use 'fds=x:y:...:z' to connect to already opened multiqueue capable TAP interfaces\n"
" use 'sndbuf=nbytes' to limit the size of the send buffer (the\n"
" default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')\n"
" use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag\n"
" (only has effect for virtio guests which use MSIX)\n"
" use vhostforce=on to force vhost on for non-MSIX virtio guests\n"
" use 'vhostfd=h' to connect to an already opened vhost net device\n"
+ " use 'vhostfds=x:y:...:z to connect to multiple already opened vhost net devices\n"
+ " use 'queues=n' to specify the number of queues to be created for multiqueue TAP\n"
"-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]\n"
" connects a host TAP network interface to a host bridge device 'br'\n"
" (default=" DEFAULT_BRIDGE_INTERFACE ") using the program 'helper'\n"
" on host and listening for incoming connections on 'socketpath'.\n"
" Use group 'groupname' and mode 'octalmode' to change default\n"
" ownership and permissions for communication port.\n"
+#endif
+#ifdef CONFIG_NETMAP
+ "-net netmap,ifname=name[,devname=nmname]\n"
+ " attach to the existing netmap-enabled network interface 'name', or to a\n"
+ " VALE port (created on the fly) called 'name' ('nmname' is name of the \n"
+ " netmap device, defaults to '/dev/netmap')\n"
#endif
"-net dump[,vlan=n][,file=f][,len=n]\n"
" dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n"
#ifdef CONFIG_VDE
"vde|"
#endif
- "socket],id=str[,option][,option][,...]\n", QEMU_ARCH_ALL)
+#ifdef CONFIG_NETMAP
+ "netmap|"
+#endif
+ "socket|"
+ "hubport],id=str[,option][,option][,...]\n", QEMU_ARCH_ALL)
STEXI
@item -net nic[,vlan=@var{n}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}]
@findex -net
If running QEMU as an unprivileged user, use the network helper
@var{helper} to configure the TAP interface. The default network
-helper executable is @file{/usr/local/libexec/qemu-bridge-helper}.
+helper executable is @file{/path/to/qemu-bridge-helper}.
@option{fd}=@var{h} can be used to specify the handle of an already
opened host TAP interface.
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
qemu-system-i386 linux.img \
- -net nic -net tap,"helper=/usr/local/libexec/qemu-bridge-helper"
+ -net nic -net tap,"helper=/path/to/qemu-bridge-helper"
@end example
@item -netdev bridge,id=@var{id}[,br=@var{bridge}][,helper=@var{helper}]
Use the network helper @var{helper} to configure the TAP interface and
attach it to the bridge. The default network helper executable is
-@file{/usr/local/libexec/qemu-bridge-helper} and the default bridge
+@file{/path/to/qemu-bridge-helper} and the default bridge
device is @file{br0}.
Examples:
qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch
@end example
+@item -netdev hubport,id=@var{id},hubid=@var{hubid}
+
+Create a hub port on QEMU "vlan" @var{hubid}.
+
+The hubport netdev lets you connect a NIC to a QEMU "vlan" instead of a single
+netdev. @code{-net} and @code{-device} with parameter @option{vlan} create the
+required hub automatically.
+
@item -net dump[,vlan=@var{n}][,file=@var{file}][,len=@var{len}]
Dump network traffic on VLAN @var{n} to file @var{file} (@file{qemu-vlan0.pcap} by default).
At most @var{len} bytes (64k by default) per packet are stored. The file format is
Indicate that no network devices should be configured. It is used to
override the default configuration (@option{-net nic -net user}) which
is activated if no @option{-net} options are provided.
+ETEXI
+STEXI
@end table
ETEXI
-
DEFHEADING()
DEFHEADING(Character device options:)
+STEXI
+
+The general form of a character device option is:
+@table @option
+ETEXI
DEF("chardev", HAS_ARG, QEMU_OPTION_chardev,
"-chardev null,id=id[,mux=on|off]\n"
)
STEXI
-
-The general form of a character device option is:
-@table @option
-
@item -chardev @var{backend} ,id=@var{id} [,mux=on|off] [,@var{options}]
@findex -chardev
Backend is one of:
Connect to a spice port, allowing a Spice client to handle the traffic
identified by a name (preferably a fqdn).
+ETEXI
+STEXI
@end table
ETEXI
-
DEFHEADING()
-STEXI
DEFHEADING(Device URL Syntax:)
+STEXI
In addition to using normal file images for the emulated storage devices,
QEMU can also use networked resources such as iSCSI devices. These are
DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi,
"-iscsi [user=user][,password=password]\n"
" [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n"
- " [,initiator-name=iqn]\n"
+ " [,initiator-name=initiator-iqn][,id=target-iqn]\n"
" iSCSI session parameters\n", QEMU_ARCH_ALL)
STEXI
qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket
@end example
+@item SSH
+QEMU supports SSH (Secure Shell) access to remote disks.
+
+Examples:
+@example
+qemu-system-i386 -drive file=ssh://user@@host/path/to/disk.img
+qemu-system-i386 -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img
+@end example
+
+Currently authentication must be done using ssh-agent. Other
+authentication methods may be supported in future.
+
@item Sheepdog
Sheepdog is a distributed storage system for QEMU.
QEMU supports using either local sheepdog devices or remote networked
devices.
Syntax for specifying a sheepdog device
-@table @list
-``sheepdog:<vdiname>''
-
-``sheepdog:<vdiname>:<snapid>''
-
-``sheepdog:<vdiname>:<tag>''
-
-``sheepdog:<host>:<port>:<vdiname>''
-
-``sheepdog:<host>:<port>:<vdiname>:<snapid>''
-
-``sheepdog:<host>:<port>:<vdiname>:<tag>''
-@end table
+@example
+sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag]
+@end example
Example
@example
-qemu-system-i386 --drive file=sheepdog:192.0.2.1:30000:MyVirtualMachine
+qemu-system-i386 --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine
@end example
See also @url{http://http://www.osrg.net/sheepdog/}.
Example
@example
-qemu-system-x86_84 --drive file=gluster://192.0.2.1/testvol/a.img
+qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img
@end example
See also @url{http://www.gluster.org}.
+
+@item HTTP/HTTPS/FTP/FTPS/TFTP
+QEMU supports read-only access to files accessed over http(s), ftp(s) and tftp.
+
+Syntax using a single filename:
+@example
+<protocol>://[<username>[:<password>]@@]<host>/<path>
+@end example
+
+where:
+@table @option
+@item protocol
+'http', 'https', 'ftp', 'ftps', or 'tftp'.
+
+@item username
+Optional username for authentication to the remote server.
+
+@item password
+Optional password for authentication to the remote server.
+
+@item host
+Address of the remote server.
+
+@item path
+Path on the remote server, including any query string.
+@end table
+
+The following options are also supported:
+@table @option
+@item url
+The full URL when passing options to the driver explicitly.
+
+@item readahead
+The amount of data to read ahead with each range request to the remote server.
+This value may optionally have the suffix 'T', 'G', 'M', 'K', 'k' or 'b'. If it
+does not have a suffix, it will be assumed to be in bytes. The value must be a
+multiple of 512 bytes. It defaults to 256k.
+
+@item sslverify
+Whether to verify the remote server's certificate when connecting over SSL. It
+can have the value 'on' or 'off'. It defaults to 'on'.
+@end table
+
+Note that when passing options to qemu explicitly, @option{driver} is the value
+of <protocol>.
+
+Example: boot from a remote Fedora 20 live ISO image
+@example
+qemu-system-x86_64 --drive media=cdrom,file=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+
+qemu-system-x86_64 --drive media=cdrom,file.driver=http,file.url=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+@end example
+
+Example: boot from a remote Fedora 20 cloud image using a local overlay for
+writes, copy-on-read, and a readahead of 64k
+@example
+qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"https://dl.fedoraproject.org/pub/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2
+
+qemu-system-x86_64 -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on
+@end example
+
+Example: boot from an image stored on a VMware vSphere server with a self-signed
+certificate using a local overlay for writes and a readahead of 64k
+@example
+qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"https",, "file.url":"https://user:password@@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k"@}' /tmp/test.qcow2
+
+qemu-system-x86_64 -drive file=/tmp/test.qcow2
+@end example
+ETEXI
+
+STEXI
@end table
ETEXI
DEFHEADING(Bluetooth(R) options:)
+STEXI
+@table @option
+ETEXI
DEF("bt", HAS_ARG, QEMU_OPTION_bt, \
"-bt hci,null dumb bluetooth HCI - doesn't respond to commands\n" \
" emulate a bluetooth device 'dev' in scatternet 'n'\n",
QEMU_ARCH_ALL)
STEXI
-@table @option
-
@item -bt hci[...]
@findex -bt
Defines the function of the corresponding Bluetooth HCI. -bt options
@item keyboard
Virtual wireless keyboard implementing the HIDP bluetooth profile.
@end table
+ETEXI
+
+STEXI
+@end table
+ETEXI
+DEFHEADING()
+
+#ifdef CONFIG_TPM
+DEFHEADING(TPM device options:)
+
+DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \
+ "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
+ " use path to provide path to a character device; default is /dev/tpm0\n"
+ " use cancel-path to provide path to TPM's cancel sysfs entry; if\n"
+ " not provided it will be searched for in /sys/class/misc/tpm?/device\n",
+ QEMU_ARCH_ALL)
+STEXI
+
+The general form of a TPM device option is:
+@table @option
+
+@item -tpmdev @var{backend} ,id=@var{id} [,@var{options}]
+@findex -tpmdev
+Backend type must be:
+@option{passthrough}.
+
+The specific backend type will determine the applicable options.
+The @code{-tpmdev} option creates the TPM backend and requires a
+@code{-device} option that specifies the TPM frontend interface model.
+
+Options to each backend are described below.
+
+Use 'help' to print all available TPM backend types.
+@example
+qemu -tpmdev help
+@end example
+
+@item -tpmdev passthrough, id=@var{id}, path=@var{path}, cancel-path=@var{cancel-path}
+
+(Linux-host only) Enable access to the host's TPM using the passthrough
+driver.
+
+@option{path} specifies the path to the host's TPM device, i.e., on
+a Linux host this would be @code{/dev/tpm0}.
+@option{path} is optional and by default @code{/dev/tpm0} is used.
+
+@option{cancel-path} specifies the path to the host TPM device's sysfs
+entry allowing for cancellation of an ongoing TPM command.
+@option{cancel-path} is optional and by default QEMU will search for the
+sysfs entry to use.
+
+Some notes about using the host's TPM with the passthrough driver:
+
+The TPM device accessed by the passthrough driver must not be
+used by any other application on the host.
+
+Since the host's firmware (BIOS/UEFI) has already initialized the TPM,
+the VM's firmware (BIOS/UEFI) will not be able to initialize the
+TPM again and may therefore not show a TPM-specific menu that would
+otherwise allow the user to configure the TPM, e.g., allow the user to
+enable/disable or activate/deactivate the TPM.
+Further, if TPM ownership is released from within a VM then the host's TPM
+will get disabled and deactivated. To enable and activate the
+TPM again afterwards, the host has to be rebooted and the user is
+required to enter the firmware's menu to enable and activate the TPM.
+If the TPM is left disabled and/or deactivated most TPM commands will fail.
+
+To create a passthrough TPM use the following two options:
+@example
+-tpmdev passthrough,id=tpm0 -device tpm-tis,tpmdev=tpm0
+@end example
+Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
+@code{tpmdev=tpm0} in the device option.
+
@end table
+
ETEXI
DEFHEADING()
+#endif
+
DEFHEADING(Linux/Multiboot boot specific:)
STEXI
STEXI
@end table
ETEXI
-
DEFHEADING()
DEFHEADING(Debug/Expert options:)
-
STEXI
@table @option
ETEXI
No device is allocated.
@item null
void device
+@item chardev:@var{id}
+Use a named character device defined with the @code{-chardev} option.
@item /dev/XXX
[Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port
parameters are set according to the emulated ones.
@item mon:@var{dev_string}
This is a special option to allow the monitor to be multiplexed onto
another serial port. The monitor is accessed with key sequence of
-@key{Control-a} and then pressing @key{c}. See monitor access
-@ref{pcsys_keys} in the -nographic section for more keys.
+@key{Control-a} and then pressing @key{c}.
@var{dev_string} should be any one of the serial devices specified
above. An example to multiplex the monitor onto a telnet server
listening on port 4444 would be:
@table @code
@item -serial mon:telnet::4444,server,nowait
@end table
+When the monitor is multiplexed to stdio in this way, Ctrl+C will not terminate
+QEMU any more but will be passed to the guest instead.
@item braille
Braille device. This will use BrlAPI to display the braille output on a real
serial port).
The default device is @code{vc} in graphical mode and @code{stdio} in
non graphical mode.
+Use @code{-monitor none} to disable the default monitor.
ETEXI
DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \
"-qmp dev like -monitor but opens in 'control' mode\n",
ETEXI
DEF("mon", HAS_ARG, QEMU_OPTION_mon, \
- "-mon chardev=[name][,mode=readline|control][,default]\n", QEMU_ARCH_ALL)
+ "-mon [chardev=]name[,mode=readline|control][,default]\n", QEMU_ARCH_ALL)
STEXI
-@item -mon chardev=[name][,mode=readline|control][,default]
+@item -mon [chardev=]name[,mode=readline|control][,default]
@findex -mon
Setup monitor on chardev @var{name}.
ETEXI
Do not start CPU at startup (you must type 'c' in the monitor).
ETEXI
+DEF("realtime", HAS_ARG, QEMU_OPTION_realtime,
+ "-realtime [mlock=on|off]\n"
+ " run qemu with realtime features\n"
+ " mlock=on|off controls mlock support (default: on)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -realtime mlock=on|off
+@findex -realtime
+Run qemu with realtime features.
+mlocking qemu and guest memory can be enabled via @option{mlock=on}
+(enabled by default).
+ETEXI
+
DEF("gdb", HAS_ARG, QEMU_OPTION_gdb, \
"-gdb dev wait for gdb connection on 'dev'\n", QEMU_ARCH_ALL)
STEXI
ETEXI
DEF("d", HAS_ARG, QEMU_OPTION_d, \
- "-d item1,... output log to /tmp/qemu.log (use '-d help' for a list of log items)\n",
+ "-d item1,... enable logging of specified items (use '-d help' for a list of log items)\n",
QEMU_ARCH_ALL)
STEXI
-@item -d
+@item -d @var{item1}[,...]
@findex -d
-Output log in /tmp/qemu.log
+Enable logging of specified items. Use '-d help' for a list of log items.
ETEXI
DEF("D", HAS_ARG, QEMU_OPTION_D, \
- "-D logfile output log to logfile (instead of the default /tmp/qemu.log)\n",
+ "-D logfile output log to logfile (default stderr)\n",
QEMU_ARCH_ALL)
STEXI
@item -D @var{logfile}
@findex -D
-Output log in @var{logfile} instead of /tmp/qemu.log
-ETEXI
-
-DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \
- "-hdachs c,h,s[,t]\n" \
- " force hard disk 0 physical geometry and the optional BIOS\n" \
- " translation (t=none or lba) (usually QEMU can guess them)\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -hdachs @var{c},@var{h},@var{s},[,@var{t}]
-@findex -hdachs
-Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
-@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
-translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
-all those parameters. This option is useful for old MS-DOS disk
-images.
+Output log in @var{logfile} instead of to stderr
ETEXI
DEF("L", HAS_ARG, QEMU_OPTION_L, \
MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the
format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC.
-By default the RTC is driven by the host system time. This allows to use the
+By default the RTC is driven by the host system time. This allows using of the
RTC as accurate reference clock inside the guest, specifically if the host
time is smoothly following an accurate external reference clock, e.g. via NTP.
If you want to isolate the guest time from the host, you can set @option{clock}
Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only).
ETEXI
DEF("semihosting", 0, QEMU_OPTION_semihosting,
- "-semihosting semihosting mode\n", QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA)
+ "-semihosting semihosting mode\n",
+ QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32)
STEXI
@item -semihosting
@findex -semihosting
"-sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').\n",
QEMU_ARCH_ALL)
STEXI
-@item -sandbox
+@item -sandbox @var{arg}
@findex -sandbox
Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off' will
disable it. The default is 'off'.
" property must be set. These objects are placed in the\n"
" '/objects' path.\n",
QEMU_ARCH_ALL)
+STEXI
+@item -object @var{typename}[,@var{prop1}=@var{value1},...]
+@findex -object
+Create an new object of type @var{typename} setting properties
+in the order they are specified. Note that the 'id'
+property must be set. These objects are placed in the
+'/objects' path.
+ETEXI
+
+DEF("msg", HAS_ARG, QEMU_OPTION_msg,
+ "-msg timestamp[=on|off]\n"
+ " change the format of messages\n"
+ " on|off controls leading timestamps (default:on)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -msg timestamp[=on|off]
+@findex -msg
+prepend a timestamp to each log message.(default:on)
+ETEXI
HXCOMM This is the last statement. Insert new options before this line!
STEXI
projects / mirror_qemu.git / blobdiff