"-machine [type=]name[,prop[=value][,...]]\n"
" selects emulated machine ('-machine help' for list)\n"
" property accel=accel1[:accel2[:...]] selects accelerator\n"
- " supported accelerators are kvm, xen, hax or tcg (default: tcg)\n"
+ " supported accelerators are kvm, xen, hax, hvf or tcg (default: tcg)\n"
" kernel_irqchip=on|off|split controls accelerated irqchip support (default=off)\n"
" vmport=on|off|auto controls emulation of vmport (default: auto)\n"
" kvm_shadow_mem=size of KVM shadow MMU in bytes\n"
@table @option
@item accel=@var{accels1}[:@var{accels2}[:...]]
This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax or tcg can be available. By default, tcg is used. If there is
+kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there is
more than one accelerator specified, the next one is used if the previous one
fails to initialize.
@item kernel_irqchip=on|off
DEF("accel", HAS_ARG, QEMU_OPTION_accel,
"-accel [accel=]accelerator[,thread=single|multi]\n"
- " select accelerator (kvm, xen, hax or tcg; use 'help' for a list)\n"
- " thread=single|multi (enable multi-threaded TCG)\n", QEMU_ARCH_ALL)
+ " select accelerator (kvm, xen, hax, hvf or tcg; use 'help' for a list)\n"
+ " thread=single|multi (enable multi-threaded TCG)", QEMU_ARCH_ALL)
STEXI
@item -accel @var{name}[,prop=@var{value}[,...]]
@findex -accel
This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax or tcg can be available. By default, tcg is used. If there is
+kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there is
more than one accelerator specified, the next one is used if the previous one
fails to initialize.
@table @option
DEF("numa", HAS_ARG, QEMU_OPTION_numa,
"-numa node[,mem=size][,cpus=firstcpu[-lastcpu]][,nodeid=node]\n"
"-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node]\n"
- "-numa dist,src=source,dst=destination,val=distance\n", QEMU_ARCH_ALL)
+ "-numa dist,src=source,dst=destination,val=distance\n"
+ "-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]\n",
+ QEMU_ARCH_ALL)
STEXI
@item -numa node[,mem=@var{size}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}]
@itemx -numa node[,memdev=@var{id}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}]
@item media=@var{media}
This option defines the type of the media: disk or cdrom.
@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
-These options have the same definition as they have in @option{-hdachs}.
-These parameters are deprecated, use the corresponding parameters
+Force disk physical geometry and the optional BIOS translation (trans=none or
+lba). These parameters are deprecated, use the corresponding parameters
of @code{-device} instead.
@item snapshot=@var{snapshot}
@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
the write back by pressing @key{C-a s} (@pxref{disk_images}).
ETEXI
-DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \
- "-hdachs c,h,s[,t]\n" \
- " force hard disk 0 physical geometry and the optional BIOS\n" \
- " translation (t=none or lba) (usually QEMU can guess them)\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -hdachs @var{c},@var{h},@var{s},[,@var{t}]
-@findex -hdachs
-Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
-@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
-translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
-all those parameters. This option is deprecated, please use
-@code{-device ide-hd,cyls=c,heads=h,secs=s,...} instead.
-ETEXI
-
DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
"-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n"
" [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd][,fmode=fmode][,dmode=dmode]\n"
"-netdev hubport,id=str,hubid=n\n"
" configure a hub port on QEMU VLAN 'n'\n", QEMU_ARCH_ALL)
DEF("net", HAS_ARG, QEMU_OPTION_net,
- "-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n"
- " old way to create a new NIC and connect it to VLAN 'n'\n"
- " (use the '-device devtype,netdev=str' option if possible instead)\n"
+ "-net nic[,vlan=n][,netdev=nd][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n"
+ " configure or create an on-board (or machine default) NIC and\n"
+ " connect it either to VLAN 'n' or the netdev 'nd' (for pluggable\n"
+ " NICs please use '-device devtype,netdev=nd' instead)\n"
"-net dump[,vlan=n][,file=f][,len=n]\n"
" dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n"
"-net none use it alone to have zero network devices. If no -net option\n"
" old way to initialize a host network interface\n"
" (use the -netdev option if possible instead)\n", QEMU_ARCH_ALL)
STEXI
-@item -net nic[,vlan=@var{n}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}]
+@item -net nic[,vlan=@var{n}][,netdev=@var{nd}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}]
@findex -net
-Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n}
-= 0 is the default). The NIC is an e1000 by default on the PC
+Configure or create an on-board (or machine default) Network Interface Card
+(NIC) and connect it either to VLAN @var{n} (@var{n} = 0 is the default), or
+to the netdev @var{nd}. The NIC is an e1000 by default on the PC
target. Optionally, the MAC address can be changed to @var{mac}, the
device address set to @var{addr} (PCI cards only),
and a @var{name} can be assigned for use in monitor commands.
@table @option
-@item -object memory-backend-file,id=@var{id},size=@var{size},mem-path=@var{dir},share=@var{on|off},discard-data=@var{on|off}
+@item -object memory-backend-file,id=@var{id},size=@var{size},mem-path=@var{dir},share=@var{on|off},discard-data=@var{on|off},merge=@var{on|off},dump=@var{on|off},prealloc=@var{on|off},host-nodes=@var{host-nodes},policy=@var{default|preferred|bind|interleave},align=@var{align}
Creates a memory file backend object, which can be used to back
-the guest RAM with huge pages. The @option{id} parameter is a
-unique ID that will be used to reference this memory region
-when configuring the @option{-numa} argument. The @option{size}
-option provides the size of the memory region, and accepts
-common suffixes, eg @option{500M}. The @option{mem-path} provides
-the path to either a shared memory or huge page filesystem mount.
+the guest RAM with huge pages.
+
+The @option{id} parameter is a unique ID that will be used to reference this
+memory region when configuring the @option{-numa} argument.
+
+The @option{size} option provides the size of the memory region, and accepts
+common suffixes, eg @option{500M}.
+
+The @option{mem-path} provides the path to either a shared memory or huge page
+filesystem mount.
+
The @option{share} boolean option determines whether the memory
region is marked as private to QEMU, or shared. The latter allows
a co-operating external process to access the QEMU memory region.
+
Setting the @option{discard-data} boolean option to @var{on}
indicates that file contents can be destroyed when QEMU exits,
to avoid unnecessarily flushing data to the backing file. Note
might not discard file contents if it aborts unexpectedly or is
terminated using SIGKILL.
+The @option{merge} boolean option enables memory merge, also known as
+MADV_MERGEABLE, so that Kernel Samepage Merging will consider the pages for
+memory deduplication.
+
+Setting the @option{dump} boolean option to @var{off} excludes the memory from
+core dumps. This feature is also known as MADV_DONTDUMP.
+
+The @option{prealloc} boolean option enables memory preallocation.
+
+The @option{host-nodes} option binds the memory range to a list of NUMA host
+nodes.
+
+The @option{policy} option sets the NUMA policy to one of the following values:
+
+@table @option
+@item @var{default}
+default host policy
+
+@item @var{preferred}
+prefer the given host node list for allocation
+
+@item @var{bind}
+restrict memory allocation to the given host node list
+
+@item @var{interleave}
+interleave memory allocations across the given host node list
+@end table
+
+The @option{align} option specifies the base address alignment when
+QEMU mmap(2) @option{mem-path}, and accepts common suffixes, eg
+@option{2M}. Some backend store specified by @option{mem-path}
+requires an alignment different than the default one used by QEMU, eg
+the device DAX /dev/dax0.0 requires 2M alignment rather than 4K. In
+such cases, users can specify the required alignment via this option.
+
+@item -object memory-backend-ram,id=@var{id},merge=@var{on|off},dump=@var{on|off},prealloc=@var{on|off},size=@var{size},host-nodes=@var{host-nodes},policy=@var{default|preferred|bind|interleave}
+
+Creates a memory backend object, which can be used to back the guest RAM.
+Memory backend objects offer more control than the @option{-m} option that is
+traditionally used to define guest RAM. Please refer to
+@option{memory-backend-file} for a description of the options.
+
@item -object rng-random,id=@var{id},filename=@var{/dev/random}
Creates a random number generator backend which obtains entropy from
projects / mirror_qemu.git / blobdiff