Set the initial graphical resolution and depth (PPC, SPARC only).
ETEXI
-DEF("input-linux", 1, QEMU_OPTION_input_linux,
- "-input-linux <evdev>\n"
- " Use input device.\n", QEMU_ARCH_ALL)
-STEXI
-@item -input-linux @var{dev}
-@findex -input-linux
-Use input device.
-ETEXI
-
DEF("vnc", HAS_ARG, QEMU_OPTION_vnc ,
"-vnc display start a VNC server on display\n", QEMU_ARCH_ALL)
STEXI
DEF("netdev", HAS_ARG, QEMU_OPTION_netdev,
#ifdef CONFIG_SLIRP
- "-netdev user,id=str[,net=addr[/mask]][,host=addr][,ip6-net=addr[/int]]\n"
- " [,ip6-host=addr][,restrict=on|off][,hostname=host][,dhcpstart=addr]\n"
- " [,dns=addr][,ip6-dns=addr][,dnssearch=domain][,tftp=dir]\n"
+ "-netdev user,id=str[,ipv4[=on|off]][,net=addr[/mask]][,host=addr]\n"
+ " [,ipv6[=on|off]][,ipv6-net=addr[/int]][,ipv6-host=addr]\n"
+ " [,restrict=on|off][,hostname=host][,dhcpstart=addr]\n"
+ " [,dns=addr][,ipv6-dns=addr][,dnssearch=domain][,tftp=dir]\n"
" [,bootfile=f][,hostfwd=rule][,guestfwd=rule]"
#ifndef _WIN32
"[,smb=dir[,smbserver=addr]]\n"
@itemx name=@var{name}
Assign symbolic name for use in monitor commands.
+@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must
+be enabled. If neither is specified both protocols are enabled.
+
@item net=@var{addr}[/@var{mask}]
Set IP network address the guest will see. Optionally specify the netmask,
either in the form a.b.c.d or as number of valid top-most bits. Default is
Specify the guest-visible address of the host. Default is the 2nd IP in the
guest network, i.e. x.x.x.2.
-@item ip6-net=@var{addr}[/@var{int}]
-Set IPv6 network address the guest will see. Optionally specify the prefix
-size, as number of valid top-most bits. Default is fec0::/64.
+@item ipv6-net=@var{addr}[/@var{int}]
+Set IPv6 network address the guest will see (default is fec0::/64). The
+network prefix is given in the usual hexadecimal IPv6 address
+notation. The prefix size is optional, and is given as the number of
+valid top-most bits (default is 64).
-@item ip6-host=@var{addr}
+@item ipv6-host=@var{addr}
Specify the guest-visible IPv6 address of the host. Default is the 2nd IPv6 in
the guest network, i.e. xxxx::2.
be different from the host address. Default is the 3rd IP in the guest network,
i.e. x.x.x.3.
-@item ip6-dns=@var{addr}
+@item ipv6-dns=@var{addr}
Specify the guest-visible address of the IPv6 virtual nameserver. The address
must be different from the host address. Default is the 3rd IP in the guest
network, i.e. xxxx::3.
DEF("fw_cfg", HAS_ARG, QEMU_OPTION_fwcfg,
"-fw_cfg [name=]<name>,file=<file>\n"
- " add named fw_cfg entry from file\n"
+ " add named fw_cfg entry with contents from file\n"
"-fw_cfg [name=]<name>,string=<str>\n"
- " add named fw_cfg entry from string\n",
+ " add named fw_cfg entry with contents from string\n",
QEMU_ARCH_ALL)
STEXI
+
@item -fw_cfg [name=]@var{name},file=@var{file}
@findex -fw_cfg
-Add named fw_cfg entry from file. @var{name} determines the name of
-the entry in the fw_cfg file directory exposed to the guest.
+Add named fw_cfg entry with contents from file @var{file}.
@item -fw_cfg [name=]@var{name},string=@var{str}
-Add named fw_cfg entry from string.
+Add named fw_cfg entry with contents from string @var{str}.
+
+The terminating NUL character of the contents of @var{str} will not be
+included as part of the fw_cfg item data. To insert contents with
+embedded NUL characters, you have to use the @var{file} parameter.
+
+The fw_cfg entries are passed by QEMU through to the guest.
+
+Example:
+@example
+ -fw_cfg name=opt/com.mycompany/blob,file=./my_blob.bin
+@end example
+creates an fw_cfg entry named opt/com.mycompany/blob with contents
+from ./my_blob.bin.
+
ETEXI
DEF("serial", HAS_ARG, QEMU_OPTION_serial, \
Output log in @var{logfile} instead of to stderr
ETEXI
+DEF("dfilter", HAS_ARG, QEMU_OPTION_DFILTER, \
+ "-dfilter range,.. filter debug output to range of addresses (useful for -d cpu,exec,etc..)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -dfilter @var{range1}[,...]
+@findex -dfilter
+Filter debug output to that relevant to a range of target addresses. The filter
+spec can be either @var{start}+@var{size}, @var{start}-@var{size} or
+@var{start}..@var{end} where @var{start} @var{end} and @var{size} are the
+addresses and sizes required. For example:
+@example
+ -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,0xffffffc000060000-0x1000
+@end example
+Will dump output for any code in the 0x1000 sized block starting at 0x8000 and
+the 0x200 sized block starting at 0xffffffc000080000 and another 0x1000 sized
+block starting at 0xffffffc00005f000.
+ETEXI
+
DEF("L", HAS_ARG, QEMU_OPTION_L, \
"-L path set the directory for the BIOS, VGA BIOS and keymaps\n",
QEMU_ARCH_ALL)
@option{tx}: the filter is attached to the transmit queue of the netdev,
where it will receive packets sent by the netdev.
+@item -object filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid}[,queue=@var{all|rx|tx}]
+
+filter-mirror on netdev @var{netdevid},mirror net packet to chardev
+@var{chardevid}
+
+@item -object filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},
+outdev=@var{chardevid}[,queue=@var{all|rx|tx}]
+
+filter-redirector on netdev @var{netdevid},redirect filter's net packet to chardev
+@var{chardevid},and redirect indev's packet to filter.
+Create a filter-redirector we need to differ outdev id from indev id, id can not
+be the same. we can just use indev or outdev, but at least one of indev or outdev
+need to be specified.
+
@item -object filter-dump,id=@var{id},netdev=@var{dev},file=@var{filename}][,maxlen=@var{len}]
Dump the network traffic on netdev @var{dev} to the file specified by
the AES-256 decryption key. This key should be 32-bytes long and be
base64 encoded. The @var{iv} parameter provides the random initialization
vector used for encryption of this particular secret and should be a
-base64 encrypted string of the 32-byte IV.
+base64 encrypted string of the 16-byte IV.
The simplest (insecure) usage is to provide the secret inline
projects / mirror_qemu.git / blobdiff