interleave requirements before enabling the memory devices.
``targets.X=target`` provides the mapping to CXL host bridges
- which may be identified by the id provied in the -device entry.
+ which may be identified by the id provided in the -device entry.
Multiple entries are needed to specify all the targets when
the fixed memory window represents interleaved memory. X is the
target index from 0.
" split-wx=on|off (enable TCG split w^x mapping)\n"
" tb-size=n (TCG translation block cache size)\n"
" dirty-ring-size=n (KVM dirty ring GFN count, default 0)\n"
+ " notify-vmexit=run|internal-error|disable,notify-window=n (enable notify VM exit and set notify window, x86 only)\n"
" thread=single|multi (enable multi-threaded TCG)\n", QEMU_ARCH_ALL)
SRST
``-accel name[,prop=value[,...]]``
is disabled (dirty-ring-size=0). When enabled, KVM will instead
record dirty pages in a bitmap.
+ ``notify-vmexit=run|internal-error|disable,notify-window=n``
+ Enables or disables notify VM exit support on x86 host and specify
+ the corresponding notify window to trigger the VM exit if enabled.
+ ``run`` option enables the feature. It does nothing and continue
+ if the exit happens. ``internal-error`` option enables the feature.
+ It raises a internal error. ``disable`` option doesn't enable the feature.
+ This feature can mitigate the CPU stuck issue due to event windows don't
+ open up for a specified of time (i.e. notify-window).
+ Default: notify-vmexit=run,notify-window=0.
+
ERST
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
\
``-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]``
\
-``-numa hmat-lb,initiator=node,target=node,hierarchy=hierarchy,data-type=tpye[,latency=lat][,bandwidth=bw]``
+``-numa hmat-lb,initiator=node,target=node,hierarchy=hierarchy,data-type=type[,latency=lat][,bandwidth=bw]``
\
``-numa hmat-cache,node-id=node,size=size,level=level[,associativity=str][,policy=str][,line=size]``
Define a NUMA node and assign RAM and VCPUs to it. Set the NUMA
"-audiodev sdl,id=id[,prop[=value][,...]]\n"
" in|out.buffer-count= number of buffers\n"
#endif
+#ifdef CONFIG_AUDIO_SNDIO
+ "-audiodev sndio,id=id[,prop[=value][,...]]\n"
+#endif
#ifdef CONFIG_SPICE
"-audiodev spice,id=id[,prop[=value][,...]]\n"
#endif
``in|out.buffer-count=count``
Sets the count of the buffers.
+``-audiodev sndio,id=id[,prop[=value][,...]]``
+ Creates a backend using SNDIO. This backend is available on
+ OpenBSD and most other Unix-like systems.
+
+ Sndio specific options are:
+
+ ``in|out.dev=device``
+ Specify the sndio device to use for input and/or output. Default
+ is ``default``.
+
+ ``in|out.latency=usecs``
+ Sets the desired period length in microseconds.
+
``-audiodev spice,id=id[,prop[=value][,...]]``
Creates a backend that sends audio through SPICE. This backend
requires ``-spice`` and automatically selected in that case, so
details on the external interface.
``-device isa-ipmi-kcs,bmc=id[,ioport=val][,irq=val]``
- Add a KCS IPMI interafce on the ISA bus. This also adds a
+ Add a KCS IPMI interface on the ISA bus. This also adds a
corresponding ACPI and SMBIOS entries, if appropriate.
``bmc=id``
is 0xe4 and the default interrupt is 5.
``-device pci-ipmi-kcs,bmc=id``
- Add a KCS IPMI interafce on the PCI bus.
+ Add a KCS IPMI interface on the PCI bus.
``bmc=id``
The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above.
directory on host is made directly accessible by guest as a pass-through
file system by using the 9P network protocol for communication between
host and guests, if desired even accessible, shared by several guests
- simultaniously.
+ simultaneously.
Note that ``-virtfs`` is actually just a convenience shortcut for its
generalized form ``-fsdev -device virtio-9p-pci``.
#if defined(CONFIG_GTK)
"-display gtk[,full-screen=on|off][,gl=on|off][,grab-on-hover=on|off]\n"
" [,show-tabs=on|off][,show-cursor=on|off][,window-close=on|off]\n"
+ " [,show-menubar=on|off]\n"
#endif
#if defined(CONFIG_VNC)
"-display vnc=<display>[,<optargs>]\n"
``window-close=on|off`` : Allow to quit qemu with window close button
+ ``show-menubar=on|off`` : Display the main window menubar, defaults to "on"
+
``curses[,charset=<encoding>]``
Display video output via curses. For graphics device models
which support a text mode, QEMU can display this output using a
" [,asset=str][,part=str][,max-speed=%d][,current-speed=%d]\n"
" [,processor-id=%d]\n"
" specify SMBIOS type 4 fields\n"
+ "-smbios type=8[,external_reference=str][,internal_reference=str][,connector_type=%d][,port_type=%d]\n"
+ " specify SMBIOS type 8 fields\n"
"-smbios type=11[,value=str][,path=filename]\n"
" specify SMBIOS type 11 fields\n"
"-smbios type=17[,loc_pfx=str][,bank=str][,manufacturer=str][,serial=str]\n"
"-netdev socket,id=str[,fd=h][,udp=host:port][,localaddr=host:port]\n"
" configure a network backend to connect to another network\n"
" using an UDP tunnel\n"
+ "-netdev stream,id=str[,server=on|off],addr.type=inet,addr.host=host,addr.port=port[,to=maxport][,numeric=on|off][,keep-alive=on|off][,mptcp=on|off][,addr.ipv4=on|off][,addr.ipv6=on|off]\n"
+ "-netdev stream,id=str[,server=on|off],addr.type=unix,addr.path=path[,abstract=on|off][,tight=on|off]\n"
+ "-netdev stream,id=str[,server=on|off],addr.type=fd,addr.str=file-descriptor\n"
+ " configure a network backend to connect to another network\n"
+ " using a socket connection in stream mode.\n"
+ "-netdev dgram,id=str,remote.type=inet,remote.host=maddr,remote.port=port[,local.type=inet,local.host=addr]\n"
+ "-netdev dgram,id=str,remote.type=inet,remote.host=maddr,remote.port=port[,local.type=fd,local.str=file-descriptor]\n"
+ " configure a network backend to connect to a multicast maddr and port\n"
+ " use ``local.host=addr`` to specify the host address to send packets from\n"
+ "-netdev dgram,id=str,local.type=inet,local.host=addr,local.port=port[,remote.type=inet,remote.host=addr,remote.port=port]\n"
+ "-netdev dgram,id=str,local.type=unix,local.path=path[,remote.type=unix,remote.path=path]\n"
+ "-netdev dgram,id=str,local.type=fd,local.str=file-descriptor\n"
+ " configure a network backend to connect to another network\n"
+ " using an UDP tunnel\n"
#ifdef CONFIG_VDE
"-netdev vde,id=str[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n"
" configure a network backend to connect to port 'n' of a vde switch\n"
" configure a vhost-user network, backed by a chardev 'dev'\n"
#endif
#ifdef __linux__
- "-netdev vhost-vdpa,id=str,vhostdev=/path/to/dev\n"
+ "-netdev vhost-vdpa,id=str[,vhostdev=/path/to/dev][,vhostfd=h]\n"
" configure a vhost-vdpa network,Establish a vhost-vdpa netdev\n"
+ " use 'vhostdev=/path/to/dev' to open a vhost vdpa device\n"
+ " use 'vhostfd=h' to connect to an already opened vhost vdpa device\n"
#endif
#ifdef CONFIG_VMNET
"-netdev vmnet-host,id=str[,isolated=on|off][,net-uuid=uuid]\n"
-netdev type=vhost-user,id=net0,chardev=chr0 \
-device virtio-net-pci,netdev=net0
-``-netdev vhost-vdpa,vhostdev=/path/to/dev``
+``-netdev vhost-vdpa[,vhostdev=/path/to/dev][,vhostfd=h]``
Establish a vhost-vdpa netdev.
vDPA device is a device that uses a datapath which complies with
``-action panic=none``
``-action reboot=shutdown,shutdown=pause``
- ``-watchdog i6300esb -action watchdog=pause``
+ ``-device i6300esb -action watchdog=pause``
ERST
specifies the snapshot name used to load the initial VM state.
ERST
-DEF("watchdog", HAS_ARG, QEMU_OPTION_watchdog, \
- "-watchdog model\n" \
- " enable virtual hardware watchdog [default=none]\n",
- QEMU_ARCH_ALL)
-SRST
-``-watchdog model``
- Create a virtual hardware watchdog device. Once enabled (by a guest
- action), the watchdog must be periodically polled by an agent inside
- the guest or else the guest will be restarted. Choose a model for
- which your guest has drivers.
-
- The model is the model of hardware watchdog to emulate. Use
- ``-watchdog help`` to list available hardware models. Only one
- watchdog can be enabled for a guest.
-
- The following models may be available:
-
- ``ib700``
- iBASE 700 is a very simple ISA watchdog with a single timer.
-
- ``i6300esb``
- Intel 6300ESB I/O controller hub is a much more featureful
- PCI-based dual-timer watchdog.
-
- ``diag288``
- A virtual watchdog for s390x backed by the diagnose 288
- hypercall (currently KVM only).
-ERST
-
DEF("watchdog-action", HAS_ARG, QEMU_OPTION_watchdog_action, \
"-watchdog-action reset|shutdown|poweroff|inject-nmi|pause|debug|none\n" \
" action when watchdog fires [default=reset]\n",
Examples:
- ``-watchdog i6300esb -watchdog-action pause``; \ ``-watchdog ib700``
+ ``-device i6300esb -watchdog-action pause``
ERST
DEF("qtest", HAS_ARG, QEMU_OPTION_qtest, "", QEMU_ARCH_ALL)
DEF("qtest-log", HAS_ARG, QEMU_OPTION_qtest_log, "", QEMU_ARCH_ALL)
+#ifdef __linux__
+DEF("async-teardown", 0, QEMU_OPTION_asyncteardown,
+ "-async-teardown enable asynchronous teardown\n",
+ QEMU_ARCH_ALL)
+#endif
+SRST
+``-async-teardown``
+ Enable asynchronous teardown. A new process called "cleanup/<QEMU_PID>"
+ will be created at startup sharing the address space with the main qemu
+ process, using clone. It will wait for the main qemu process to
+ terminate completely, and then exit.
+ This allows qemu to terminate very quickly even if the guest was
+ huge, leaving the teardown of the address space to the cleanup
+ process. Since the cleanup process shares the same cgroups as the
+ main qemu process, accounting is performed correctly. This only
+ works if the cleanup process is not forcefully killed with SIGKILL
+ before the main qemu process has terminated completely.
+ERST
+
DEF("msg", HAS_ARG, QEMU_OPTION_msg,
"-msg [timestamp[=on|off]][,guest-name=[on|off]]\n"
" control error message format\n"
read the colo-compare git log.
``-object cryptodev-backend-builtin,id=id[,queues=queues]``
- Creates a cryptodev backend which executes crypto opreation from
- the QEMU cipher APIS. The id parameter is a unique ID that will
+ Creates a cryptodev backend which executes crypto operations from
+ the QEMU cipher APIs. The id parameter is a unique ID that will
be used to reference this cryptodev backend from the
``virtio-crypto`` device. The queues parameter is optional,
which specify the queue number of cryptodev backend, the default
file=/etc/qemu/vnc.allow
Finally the ``/etc/qemu/vnc.allow`` file would contain the list
- of x509 distingished names that are permitted access
+ of x509 distinguished names that are permitted access
::
projects / mirror_qemu.git / blobdiff