" property accel=accel1[:accel2[:...]] selects accelerator\n"
" supported accelerators are kvm, xen, tcg (default: tcg)\n"
" kernel_irqchip=on|off controls accelerated irqchip support\n"
+ " vmport=on|off|auto controls emulation of vmport (default: auto)\n"
" kvm_shadow_mem=size of KVM shadow MMU\n"
" dump-guest-core=on|off include guest memory in a core dump (default=on)\n"
" mem-merge=on|off controls memory merge support (default: on)\n"
to initialize.
@item kernel_irqchip=on|off
Enables in-kernel irqchip support for the chosen accelerator when available.
+@item vmport=on|off|auto
+Enables emulation of VMWare IO port, for vmmouse etc. auto says to select the
+value based on accel. For accel=xen the default is off otherwise the default
+is on.
@item kvm_shadow_mem=size
Defines the size of the KVM shadow MMU.
@item dump-guest-core=on|off
"-spice [port=port][,tls-port=secured-port][,x509-dir=<dir>]\n"
" [,x509-key-file=<file>][,x509-key-password=<file>]\n"
" [,x509-cert-file=<file>][,x509-cacert-file=<file>]\n"
- " [,x509-dh-key-file=<file>][,addr=addr][,ipv4|ipv6]\n"
+ " [,x509-dh-key-file=<file>][,addr=addr][,ipv4|ipv6|unix]\n"
" [,tls-ciphers=<list>]\n"
" [,tls-channel=[main|display|cursor|inputs|record|playback]]\n"
" [,plaintext-channel=[main|display|cursor|inputs|record|playback]]\n"
@item ipv4
@item ipv6
+@item unix
Force using the specified IP version.
@item password=<secret>
DEF("chardev", HAS_ARG, QEMU_OPTION_chardev,
"-chardev null,id=id[,mux=on|off]\n"
- "-chardev socket,id=id[,host=host],port=port[,to=to][,ipv4][,ipv6][,nodelay]\n"
- " [,server][,nowait][,telnet][,mux=on|off] (tcp)\n"
- "-chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)\n"
+ "-chardev socket,id=id[,host=host],port=port[,to=to][,ipv4][,ipv6][,nodelay][,reconnect=seconds]\n"
+ " [,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off] (tcp)\n"
+ "-chardev socket,id=id,path=path[,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off] (unix)\n"
"-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n"
" [,localport=localport][,ipv4][,ipv6][,mux=on|off]\n"
"-chardev msmouse,id=id[,mux=on|off]\n"
A void device. This device will not emit any data, and will drop any data it
receives. The null backend does not take any options.
-@item -chardev socket ,id=@var{id} [@var{TCP options} or @var{unix options}] [,server] [,nowait] [,telnet]
+@item -chardev socket ,id=@var{id} [@var{TCP options} or @var{unix options}] [,server] [,nowait] [,telnet] [,reconnect=@var{seconds}]
Create a two-way stream socket, which can be either a TCP or a unix socket. A
unix socket will be created if @option{path} is specified. Behaviour is
@option{telnet} specifies that traffic on the socket should interpret telnet
escape sequences.
+@option{reconnect} sets the timeout for reconnecting on non-server sockets when
+the remote end goes away. qemu will delay this many seconds and then attempt
+to reconnect. Zero disables reconnecting, and is the default.
+
TCP and unix socket options are given below:
@table @option
localhost 5555
@end table
-@item tcp:[@var{host}]:@var{port}[,@var{server}][,nowait][,nodelay]
+@item tcp:[@var{host}]:@var{port}[,@var{server}][,nowait][,nodelay][,reconnect=@var{seconds}]
The TCP Net Console has two modes of operation. It can send the serial
I/O to a location or wait for a connection from a location. By default
the TCP Net Console is sent to @var{host} at the @var{port}. If you use
the @var{server} option QEMU will wait for a client socket application
to connect to the port before continuing, unless the @code{nowait}
option was specified. The @code{nodelay} option disables the Nagle buffering
-algorithm. If @var{host} is omitted, 0.0.0.0 is assumed. Only
+algorithm. The @code{reconnect} option only applies if @var{noserver} is
+set, if the connection goes down it will attempt to reconnect at the
+given interval. If @var{host} is omitted, 0.0.0.0 is assumed. Only
one TCP connection at a time is accepted. You can use @code{telnet} to
connect to the corresponding character device.
@table @code
sequence. Typically in unix telnet you do it with Control-] and then
type "send break" followed by pressing the enter key.
-@item unix:@var{path}[,server][,nowait]
+@item unix:@var{path}[,server][,nowait][,reconnect=@var{seconds}]
A unix domain socket is used instead of a tcp socket. The option works the
same as if you had specified @code{-serial tcp} except the unix domain socket
@var{path} is used for connections.
@findex -qmp
Like -monitor but opens in 'control' mode.
ETEXI
+DEF("qmp-pretty", HAS_ARG, QEMU_OPTION_qmp_pretty, \
+ "-qmp-pretty dev like -qmp but uses pretty JSON formatting\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -qmp-pretty @var{dev}
+@findex -qmp-pretty
+Like -qmp but uses pretty JSON formatting.
+ETEXI
DEF("mon", HAS_ARG, QEMU_OPTION_mon, \
"-mon [chardev=]name[,mode=readline|control][,default]\n", QEMU_ARCH_ALL)
This option is useful to load things like EtherBoot.
ETEXI
-DEF("clock", HAS_ARG, QEMU_OPTION_clock, \
- "-clock force the use of the given methods for timer alarm.\n" \
- " To see what timers are available use '-clock help'\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -clock @var{method}
-@findex -clock
-Force the use of the given methods for timer alarm. To see what timers
-are available use @code{-clock help}.
-ETEXI
+HXCOMM Silently ignored for compatibility
+DEF("clock", HAS_ARG, QEMU_OPTION_clock, "", QEMU_ARCH_ALL)
HXCOMM Options deprecated by -rtc
DEF("localtime", 0, QEMU_OPTION_localtime, "", QEMU_ARCH_ALL)
STEXI
@item -semihosting
@findex -semihosting
-Semihosting mode (ARM, M68K, Xtensa only).
+Enable semihosting mode (ARM, M68K, Xtensa only).
+ETEXI
+DEF("semihosting-config", HAS_ARG, QEMU_OPTION_semihosting_config,
+ "-semihosting-config [enable=on|off,]target=native|gdb|auto semihosting configuration\n",
+QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32)
+STEXI
+@item -semihosting-config [enable=on|off,]target=native|gdb|auto
+@findex -semihosting-config
+Enable semihosting and define where the semihosting calls will be addressed,
+to QEMU (@code{native}) or to GDB (@code{gdb}). The default is @code{auto}, which means
+@code{gdb} during debug sessions and @code{native} otherwise (ARM, M68K, Xtensa only).
ETEXI
DEF("old-param", 0, QEMU_OPTION_old_param,
"-old-param old param mode\n", QEMU_ARCH_ARM)
projects / mirror_qemu.git / blobdiff