" kernel_irqchip=on|off controls accelerated irqchip support\n"
" kernel_irqchip=on|off|split controls accelerated irqchip support (default=off)\n"
" vmport=on|off|auto controls emulation of vmport (default: auto)\n"
- " kvm_shadow_mem=size of KVM shadow MMU\n"
+ " kvm_shadow_mem=size of KVM shadow MMU in bytes\n"
" dump-guest-core=on|off include guest memory in a core dump (default=on)\n"
" mem-merge=on|off controls memory merge support (default: on)\n"
- " iommu=on|off controls emulated Intel IOMMU (VT-d) support (default=off)\n"
" igd-passthru=on|off controls IGD GFX passthrough support (default=off)\n"
" aes-key-wrap=on|off controls support for AES key wrapping (default=on)\n"
" dea-key-wrap=on|off controls support for DEA key wrapping (default=on)\n"
Enables or disables memory merge support. This feature, when supported by
the host, de-duplicates identical memory pages among VMs instances
(enabled by default).
-@item iommu=on|off
-Enables or disables emulated Intel IOMMU (VT-d) support. The default is off.
@item aes-key-wrap=on|off
Enables or disables AES key wrapping support on s390-ccw hosts. This feature
controls whether AES wrapping keys will be created to allow
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap}) requests are ignored or passed to the filesystem. Some machine types may not support discard requests.
@item format=@var{format}
Specify which disk @var{format} will be used rather than detecting
-the format. Can be used to specifiy format=raw to avoid interpreting
+the format. Can be used to specify format=raw to avoid interpreting
an untrusted format header.
@item serial=@var{serial}
This option specifies the serial number to assign to the device.
@item disk:[format=@var{format}]:@var{file}
Mass storage device based on file. The optional @var{format} argument
-will be used rather than detecting the format. Can be used to specifiy
+will be used rather than detecting the format. Can be used to specify
@code{format=raw} to avoid interpreting an untrusted format header.
@item host:@var{bus}.@var{addr}
DEF("display", HAS_ARG, QEMU_OPTION_display,
"-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n"
- " [,window_close=on|off]|curses|none|\n"
- " gtk[,grab_on_hover=on|off]|\n"
- " vnc=<display>[,<optargs>]\n"
- " select display type\n", QEMU_ARCH_ALL)
+ " [,window_close=on|off][,gl=on|off]|curses|none|\n"
+ "-display gtk[,grab_on_hover=on|off][,gl=on|off]|\n"
+ "-display vnc=<display>[,<optargs>]\n"
+ "-display curses\n"
+ "-display none"
+ " select display type\n"
+ "The default display is equivalent to\n"
+#if defined(CONFIG_GTK)
+ "\t\"-display gtk\"\n"
+#elif defined(CONFIG_SDL)
+ "\t\"-display sdl\"\n"
+#elif defined(CONFIG_COCOA)
+ "\t\"-display cocoa\"\n"
+#elif defined(CONFIG_VNC)
+ "\t\"-vnc localhost:0,to=99,id=default\"\n"
+#else
+ "\t\"-display none\"\n"
+#endif
+ , QEMU_ARCH_ALL)
STEXI
@item -display @var{type}
@findex -display
ETEXI
DEF("curses", 0, QEMU_OPTION_curses,
- "-curses use a curses/ncurses interface instead of SDL\n",
+ "-curses shorthand for -display curses\n",
QEMU_ARCH_ALL)
STEXI
@item -curses
ETEXI
DEF("sdl", 0, QEMU_OPTION_sdl,
- "-sdl enable SDL\n", QEMU_ARCH_ALL)
+ "-sdl shorthand for -display sdl\n", QEMU_ARCH_ALL)
STEXI
@item -sdl
@findex -sdl
ETEXI
DEF("vnc", HAS_ARG, QEMU_OPTION_vnc ,
- "-vnc display start a VNC server on display\n", QEMU_ARCH_ALL)
+ "-vnc <display> shorthand for -display vnc=<display>\n", QEMU_ARCH_ALL)
STEXI
@item -vnc @var{display}[,@var{option}[,@var{option}[,...]]]
@findex -vnc
@table @option
+@item to=@var{L}
+
+With this option, QEMU will try next available VNC @var{display}s, until the
+number @var{L}, if the origianlly defined "-vnc @var{display}" is not
+available, e.g. port 5900+@var{display} is already used by another
+application. By default, to=0.
+
@item @var{host}:@var{d}
TCP connections will only be allowed from @var{host} on display @var{d}.
allows everybody connect unconditionally. Doesn't conform to the rfb
spec but is traditional QEMU behavior.
+@item key-delay-ms
+
+Set keyboard delay, for key down and key up events, in milliseconds.
+Default is 1. Keyboards are low-bandwidth devices, so this slowdown
+can help the device and guest to keep up and not lose events in case
+events are arriving in bulk. Possible causes for the latter are flaky
+network connections, or scripts for automated testing.
+
@end table
ETEXI
DEF("netdev", HAS_ARG, QEMU_OPTION_netdev,
#ifdef CONFIG_SLIRP
- "-netdev user,id=str[,net=addr[/mask]][,host=addr][,restrict=on|off]\n"
- " [,hostname=host][,dhcpstart=addr][,dns=addr][,dnssearch=domain][,tftp=dir]\n"
+ "-netdev user,id=str[,ipv4[=on|off]][,net=addr[/mask]][,host=addr]\n"
+ " [,ipv6[=on|off]][,ipv6-net=addr[/int]][,ipv6-host=addr]\n"
+ " [,restrict=on|off][,hostname=host][,dhcpstart=addr]\n"
+ " [,dns=addr][,ipv6-dns=addr][,dnssearch=domain][,tftp=dir]\n"
" [,bootfile=f][,hostfwd=rule][,guestfwd=rule]"
#ifndef _WIN32
"[,smb=dir[,smbserver=addr]]\n"
"-netdev tap,id=str[,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile]\n"
" [,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off]\n"
" [,vhostfd=h][,vhostfds=x:y:...:z][,vhostforce=on|off][,queues=n]\n"
+ " [,poll-us=n]\n"
" configure a host TAP network backend with ID 'str'\n"
" use network scripts 'file' (default=" DEFAULT_NETWORK_SCRIPT ")\n"
" to configure it and 'dfile' (default=" DEFAULT_NETWORK_DOWN_SCRIPT ")\n"
" use 'vhostfd=h' to connect to an already opened vhost net device\n"
" use 'vhostfds=x:y:...:z to connect to multiple already opened vhost net devices\n"
" use 'queues=n' to specify the number of queues to be created for multiqueue TAP\n"
+ " use 'poll-us=n' to speciy the maximum number of microseconds that could be\n"
+ " spent on busy polling for vhost net\n"
"-netdev bridge,id=str[,br=bridge][,helper=helper]\n"
" configure a host TAP network backend with ID 'str' that is\n"
" connected to a bridge (default=" DEFAULT_BRIDGE_INTERFACE ")\n"
@itemx name=@var{name}
Assign symbolic name for use in monitor commands.
+@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must
+be enabled. If neither is specified both protocols are enabled.
+
@item net=@var{addr}[/@var{mask}]
Set IP network address the guest will see. Optionally specify the netmask,
either in the form a.b.c.d or as number of valid top-most bits. Default is
Specify the guest-visible address of the host. Default is the 2nd IP in the
guest network, i.e. x.x.x.2.
+@item ipv6-net=@var{addr}[/@var{int}]
+Set IPv6 network address the guest will see (default is fec0::/64). The
+network prefix is given in the usual hexadecimal IPv6 address
+notation. The prefix size is optional, and is given as the number of
+valid top-most bits (default is 64).
+
+@item ipv6-host=@var{addr}
+Specify the guest-visible IPv6 address of the host. Default is the 2nd IPv6 in
+the guest network, i.e. xxxx::2.
+
@item restrict=on|off
If this option is enabled, the guest will be isolated, i.e. it will not be
able to contact the host and no guest IP packets will be routed over the host
be different from the host address. Default is the 3rd IP in the guest network,
i.e. x.x.x.3.
+@item ipv6-dns=@var{addr}
+Specify the guest-visible address of the IPv6 virtual nameserver. The address
+must be different from the host address. Default is the 3rd IP in the guest
+network, i.e. xxxx::3.
+
@item dnssearch=@var{domain}
Provides an entry for the domain-search list sent by the built-in
DHCP server. More than one domain suffix can be transmitted by specifying
DEF("fw_cfg", HAS_ARG, QEMU_OPTION_fwcfg,
"-fw_cfg [name=]<name>,file=<file>\n"
- " add named fw_cfg entry from file\n"
+ " add named fw_cfg entry with contents from file\n"
"-fw_cfg [name=]<name>,string=<str>\n"
- " add named fw_cfg entry from string\n",
+ " add named fw_cfg entry with contents from string\n",
QEMU_ARCH_ALL)
STEXI
+
@item -fw_cfg [name=]@var{name},file=@var{file}
@findex -fw_cfg
-Add named fw_cfg entry from file. @var{name} determines the name of
-the entry in the fw_cfg file directory exposed to the guest.
+Add named fw_cfg entry with contents from file @var{file}.
@item -fw_cfg [name=]@var{name},string=@var{str}
-Add named fw_cfg entry from string.
+Add named fw_cfg entry with contents from string @var{str}.
+
+The terminating NUL character of the contents of @var{str} will not be
+included as part of the fw_cfg item data. To insert contents with
+embedded NUL characters, you have to use the @var{file} parameter.
+
+The fw_cfg entries are passed by QEMU through to the guest.
+
+Example:
+@example
+ -fw_cfg name=opt/com.mycompany/blob,file=./my_blob.bin
+@end example
+creates an fw_cfg entry named opt/com.mycompany/blob with contents
+from ./my_blob.bin.
+
ETEXI
DEF("serial", HAS_ARG, QEMU_OPTION_serial, \
Output log in @var{logfile} instead of to stderr
ETEXI
+DEF("dfilter", HAS_ARG, QEMU_OPTION_DFILTER, \
+ "-dfilter range,.. filter debug output to range of addresses (useful for -d cpu,exec,etc..)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -dfilter @var{range1}[,...]
+@findex -dfilter
+Filter debug output to that relevant to a range of target addresses. The filter
+spec can be either @var{start}+@var{size}, @var{start}-@var{size} or
+@var{start}..@var{end} where @var{start} @var{end} and @var{size} are the
+addresses and sizes required. For example:
+@example
+ -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,0xffffffc000060000-0x1000
+@end example
+Will dump output for any code in the 0x1000 sized block starting at 0x8000 and
+the 0x200 sized block starting at 0xffffffc000080000 and another 0x1000 sized
+block starting at 0xffffffc00005f000.
+ETEXI
+
DEF("L", HAS_ARG, QEMU_OPTION_L, \
"-L path set the directory for the BIOS, VGA BIOS and keymaps\n",
QEMU_ARCH_ALL)
@item -L @var{path}
@findex -L
Set the directory for the BIOS, VGA BIOS and keymaps.
+
+To list all the data directories, use @code{-L help}.
ETEXI
DEF("bios", HAS_ARG, QEMU_OPTION_bios, \
STEXI
HXCOMM This line is not accurate, as some sub-options are backend-specific but
HXCOMM HX does not support conditional compilation of text.
-@item -trace [events=@var{file}][,file=@var{file}]
+@item -trace [[enable=]@var{pattern}][,events=@var{file}][,file=@var{file}]
@findex -trace
-
-Specify tracing options.
-
-@table @option
-@item [enable=]@var{pattern}
-Immediately enable events matching @var{pattern}.
-The file must contain one event name (as listed in the @file{trace-events} file)
-per line; globbing patterns are accepted too. This option is only
-available if QEMU has been compiled with the @var{simple}, @var{stderr}
-or @var{ftrace} tracing backend. To specify multiple events or patterns,
-specify the @option{-trace} option multiple times.
-
-Use @code{-trace help} to print a list of names of trace points.
-
-@item events=@var{file}
-Immediately enable events listed in @var{file}.
-The file must contain one event name (as listed in the @file{trace-events} file)
-per line; globbing patterns are accepted too. This option is only
-available if QEMU has been compiled with the @var{simple}, @var{stderr} or
-@var{ftrace} tracing backend.
-
-@item file=@var{file}
-Log output traces to @var{file}.
-This option is only available if QEMU has been compiled with
-the @var{simple} tracing backend.
-@end table
+@include qemu-option-trace.texi
ETEXI
HXCOMM Internal use
@option{tx}: the filter is attached to the transmit queue of the netdev,
where it will receive packets sent by the netdev.
+@item -object filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid}[,queue=@var{all|rx|tx}]
+
+filter-mirror on netdev @var{netdevid},mirror net packet to chardev
+@var{chardevid}
+
+@item -object filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},
+outdev=@var{chardevid}[,queue=@var{all|rx|tx}]
+
+filter-redirector on netdev @var{netdevid},redirect filter's net packet to chardev
+@var{chardevid},and redirect indev's packet to filter.
+Create a filter-redirector we need to differ outdev id from indev id, id can not
+be the same. we can just use indev or outdev, but at least one of indev or outdev
+need to be specified.
+
@item -object filter-dump,id=@var{id},netdev=@var{dev},file=@var{filename}][,maxlen=@var{len}]
Dump the network traffic on netdev @var{dev} to the file specified by
the AES-256 decryption key. This key should be 32-bytes long and be
base64 encoded. The @var{iv} parameter provides the random initialization
vector used for encryption of this particular secret and should be a
-base64 encrypted string of the 32-byte IV.
+base64 encrypted string of the 16-byte IV.
The simplest (insecure) usage is to provide the secret inline
projects / mirror_qemu.git / blobdiff