@item -machine [type=]@var{name}[,prop=@var{value}[,...]]
@findex -machine
Select the emulated machine by @var{name}. Use @code{-machine help} to list
-available machines. Supported machine properties are:
+available machines.
+
+For architectures which aim to support live migration compatibility
+across releases, each release will introduce a new versioned machine
+type. For example, the 2.8.0 release introduced machine types
+``pc-i440fx-2.8'' and ``pc-q35-2.8'' for the x86_64/i686 architectures.
+
+To allow live migration of guests from QEMU version 2.8.0, to QEMU
+version 2.9.0, the 2.9.0 version must support the ``pc-i440fx-2.8''
+and ``pc-q35-2.8'' machines too. To allow users live migrating VMs
+to skip multiple intermediate releases when upgrading, new releases
+of QEMU will support machine types from many previous versions.
+
+Supported machine properties are:
@table @option
@item accel=@var{accels1}[:@var{accels2}[:...]]
This is used to enable an accelerator. Depending on the target architecture,
@item s390-squash-mcss=on|off
Enables or disables squashing subchannels into the default css.
The default is off.
+@item enforce-config-section=on|off
+If @option{enforce-config-section} is set to @var{on}, force migration
+code to send configuration section even if the machine-type sets the
+@option{migration.send-configuration} property to @var{off}.
+NOTE: this parameter is deprecated. Please use @option{-global}
+@option{migration.send-configuration}=@var{on|off} instead.
@end table
ETEXI
DEF("accel", HAS_ARG, QEMU_OPTION_accel,
"-accel [accel=]accelerator[,thread=single|multi]\n"
" select accelerator (kvm, xen, hax or tcg; use 'help' for a list)\n"
- " thread=single|multi (enable multi-threaded TCG)", QEMU_ARCH_ALL)
+ " thread=single|multi (enable multi-threaded TCG)\n", QEMU_ARCH_ALL)
STEXI
@item -accel @var{name}[,prop=@var{value}[,...]]
@findex -accel
Set default value of @var{driver}'s property @var{prop} to @var{value}, e.g.:
@example
-qemu-system-i386 -global ide-drive.physical_block_size=4096 -drive file=file,if=ide,index=0,media=disk
+qemu-system-i386 -global ide-hd.physical_block_size=4096 disk-image.img
@end example
-In particular, you can use this to set driver properties for devices which are
-created automatically by the machine model. To create a device which is not
+In particular, you can use this to set driver properties for devices which are
+created automatically by the machine model. To create a device which is not
created automatically and set properties on it, use -@option{device}.
-global @var{driver}.@var{prop}=@var{value} is shorthand for -global
" [,read-only=on|off][,detect-zeroes=on|off|unmap]\n"
" [,driver specific parameters...]\n"
" configure a block backend\n", QEMU_ARCH_ALL)
+STEXI
+@item -blockdev @var{option}[,@var{option}[,@var{option}[,...]]]
+@findex -blockdev
+
+Define a new block driver node. Some of the options apply to all block drivers,
+other options are only accepted for a specific block driver. See below for a
+list of generic options and options for the most common block drivers.
+
+Options that expect a reference to another node (e.g. @code{file}) can be
+given in two ways. Either you specify the node name of an already existing node
+(file=@var{node-name}), or you define a new node inline, adding options
+for the referenced node after a dot (file.filename=@var{path},file.aio=native).
+
+A block driver node created with @option{-blockdev} can be used for a guest
+device by specifying its node name for the @code{drive} property in a
+@option{-device} argument that defines a block device.
+
+@table @option
+@item Valid options for any block driver node:
+
+@table @code
+@item driver
+Specifies the block driver to use for the given node.
+@item node-name
+This defines the name of the block driver node by which it will be referenced
+later. The name must be unique, i.e. it must not match the name of a different
+block driver node, or (if you use @option{-drive} as well) the ID of a drive.
+
+If no node name is specified, it is automatically generated. The generated node
+name is not intended to be predictable and changes between QEMU invocations.
+For the top level, an explicit node name must be specified.
+@item read-only
+Open the node read-only. Guest write attempts will fail.
+@item cache.direct
+The host page cache can be avoided with @option{cache.direct=on}. This will
+attempt to do disk IO directly to the guest's memory. QEMU may still perform an
+internal copy of the data.
+@item cache.no-flush
+In case you don't care about data integrity over host failures, you can use
+@option{cache.no-flush=on}. This option tells QEMU that it never needs to write
+any data to the disk but can instead keep things in cache. If anything goes
+wrong, like your host losing power, the disk storage getting disconnected
+accidentally, etc. your image will most probably be rendered unusable.
+@item discard=@var{discard}
+@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and controls
+whether @code{discard} (also known as @code{trim} or @code{unmap}) requests are
+ignored or passed to the filesystem. Some machine types may not support
+discard requests.
+@item detect-zeroes=@var{detect-zeroes}
+@var{detect-zeroes} is "off", "on" or "unmap" and enables the automatic
+conversion of plain zero writes by the OS to driver specific optimized
+zero write commands. You may even choose "unmap" if @var{discard} is set
+to "unmap" to allow a zero write to be converted to an @code{unmap} operation.
+@end table
+
+@item Driver-specific options for @code{file}
+
+This is the protocol-level block driver for accessing regular files.
+
+@table @code
+@item filename
+The path to the image file in the local filesystem
+@item aio
+Specifies the AIO backend (threads/native, default: threads)
+@item locking
+Specifies whether the image file is protected with Linux OFD / POSIX locks. The
+default is to use the Linux Open File Descriptor API if available, otherwise no
+lock is applied. (auto/on/off, default: auto)
+@end table
+Example:
+@example
+-blockdev driver=file,node-name=disk,filename=disk.img
+@end example
+
+@item Driver-specific options for @code{raw}
+
+This is the image format block driver for raw images. It is usually
+stacked on top of a protocol level block driver such as @code{file}.
+
+@table @code
+@item file
+Reference to or definition of the data source block driver node
+(e.g. a @code{file} driver node)
+@end table
+Example 1:
+@example
+-blockdev driver=file,node-name=disk_file,filename=disk.img
+-blockdev driver=raw,node-name=disk,file=disk_file
+@end example
+Example 2:
+@example
+-blockdev driver=raw,node-name=disk,file.driver=file,file.filename=disk.img
+@end example
+
+@item Driver-specific options for @code{qcow2}
+
+This is the image format block driver for qcow2 images. It is usually
+stacked on top of a protocol level block driver such as @code{file}.
+
+@table @code
+@item file
+Reference to or definition of the data source block driver node
+(e.g. a @code{file} driver node)
+
+@item backing
+Reference to or definition of the backing file block device (default is taken
+from the image file). It is allowed to pass an empty string here in order to
+disable the default backing file.
+
+@item lazy-refcounts
+Whether to enable the lazy refcounts feature (on/off; default is taken from the
+image file)
+
+@item cache-size
+The maximum total size of the L2 table and refcount block caches in bytes
+(default: 1048576 bytes or 8 clusters, whichever is larger)
+
+@item l2-cache-size
+The maximum size of the L2 table cache in bytes
+(default: 4/5 of the total cache size)
+
+@item refcount-cache-size
+The maximum size of the refcount block cache in bytes
+(default: 1/5 of the total cache size)
+
+@item cache-clean-interval
+Clean unused entries in the L2 and refcount caches. The interval is in seconds.
+The default value is 0 and it disables this feature.
+
+@item pass-discard-request
+Whether discard requests to the qcow2 device should be forwarded to the data
+source (on/off; default: on if discard=unmap is specified, off otherwise)
+
+@item pass-discard-snapshot
+Whether discard requests for the data source should be issued when a snapshot
+operation (e.g. deleting a snapshot) frees clusters in the qcow2 file (on/off;
+default: on)
+
+@item pass-discard-other
+Whether discard requests for the data source should be issued on other
+occasions where a cluster gets freed (on/off; default: off)
+
+@item overlap-check
+Which overlap checks to perform for writes to the image
+(none/constant/cached/all; default: cached). For details or finer
+granularity control refer to the QAPI documentation of @code{blockdev-add}.
+@end table
+
+Example 1:
+@example
+-blockdev driver=file,node-name=my_file,filename=/tmp/disk.qcow2
+-blockdev driver=qcow2,node-name=hda,file=my_file,overlap-check=none,cache-size=16777216
+@end example
+Example 2:
+@example
+-blockdev driver=qcow2,node-name=disk,file.driver=http,file.filename=http://example.com/image.qcow2
+@end example
+
+@item Driver-specific options for other drivers
+Please refer to the QAPI documentation of the @code{blockdev-add} QMP command.
+
+@end table
+
+ETEXI
DEF("drive", HAS_ARG, QEMU_OPTION_drive,
"-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
@findex -drive
-Define a new drive. Valid options are:
+Define a new drive. This includes creating a block driver node (the backend) as
+well as a guest device, and is mostly a shortcut for defining the corresponding
+@option{-blockdev} and @option{-device} options.
+
+@option{-drive} accepts all options that are accepted by @option{-blockdev}. In
+addition, it knows the following options:
@table @option
@item file=@var{file}
This option defines the type of the media: disk or cdrom.
@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
These options have the same definition as they have in @option{-hdachs}.
+These parameters are deprecated, use the corresponding parameters
+of @code{-device} instead.
@item snapshot=@var{snapshot}
@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
(see @option{-snapshot}).
@item cache=@var{cache}
-@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
+@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough"
+and controls how the host cache is used to access block data. This is a
+shortcut that sets the @option{cache.direct} and @option{cache.no-flush}
+options (as in @option{-blockdev}), and additionally @option{cache.writeback},
+which provides a default for the @option{write-cache} option of block guest
+devices (as in @option{-device}). The modes correspond to the following
+settings:
+
+@c Our texi2pod.pl script doesn't support @multitable, so fall back to using
+@c plain ASCII art (well, UTF-8 art really). This looks okay both in the manpage
+@c and the HTML output.
+@example
+@ │ cache.writeback cache.direct cache.no-flush
+─────────────┼─────────────────────────────────────────────────
+writeback │ on off off
+none │ on on off
+writethrough │ off off off
+directsync │ off on off
+unsafe │ on off on
+@end example
+
+The default mode is @option{cache=writeback}.
+
@item aio=@var{aio}
@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO.
-@item discard=@var{discard}
-@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap}) requests are ignored or passed to the filesystem. Some machine types may not support discard requests.
@item format=@var{format}
Specify which disk @var{format} will be used rather than detecting
the format. Can be used to specify format=raw to avoid interpreting
an untrusted format header.
@item serial=@var{serial}
-This option specifies the serial number to assign to the device.
+This option specifies the serial number to assign to the device. This
+parameter is deprecated, use the corresponding parameter of @code{-device}
+instead.
@item addr=@var{addr}
-Specify the controller's PCI address (if=virtio only).
+Specify the controller's PCI address (if=virtio only). This parameter is
+deprecated, use the corresponding parameter of @code{-device} instead.
@item werror=@var{action},rerror=@var{action}
Specify which @var{action} to take on write and read errors. Valid actions are:
"ignore" (ignore the error and try to continue), "stop" (pause QEMU),
"report" (report the error to the guest), "enospc" (pause QEMU only if the
host disk is full; report the error to the guest otherwise).
The default setting is @option{werror=enospc} and @option{rerror=report}.
-@item readonly
-Open drive @option{file} as read-only. Guest write attempts will fail.
@item copy-on-read=@var{copy-on-read}
@var{copy-on-read} is "on" or "off" and enables whether to copy read backing
file sectors into the image file.
-@item detect-zeroes=@var{detect-zeroes}
-@var{detect-zeroes} is "off", "on" or "unmap" and enables the automatic
-conversion of plain zero writes by the OS to driver specific optimized
-zero write commands. You may even choose "unmap" if @var{discard} is set
-to "unmap" to allow a zero write to be converted to an UNMAP operation.
@item bps=@var{b},bps_rd=@var{r},bps_wr=@var{w}
Specify bandwidth throttling limits in bytes per second, either for all request
types or for reads or writes only. Small values can lead to timeouts or hangs
instead of a single larger disk.
@end table
-By default, the @option{cache=writeback} mode is used. It will report data
+By default, the @option{cache.writeback=on} mode is used. It will report data
writes as completed as soon as the data is present in the host page cache.
This is safe as long as your guest OS makes sure to correctly flush disk caches
where needed. If your guest OS does not handle volatile disk write caches
correctly and your host crashes or loses power, then the guest may experience
data corruption.
-For such guests, you should consider using @option{cache=writethrough}. This
+For such guests, you should consider using @option{cache.writeback=off}. This
means that the host page cache will be used to read and write data, but write
notification will be sent to the guest only after QEMU has made sure to flush
each write to the disk. Be aware that this has a major impact on performance.
-The host page cache can be avoided entirely with @option{cache=none}. This will
-attempt to do disk IO directly to the guest's memory. QEMU may still perform
-an internal copy of the data. Note that this is considered a writeback mode and
-the guest OS must handle the disk write cache correctly in order to avoid data
-corruption on host crashes.
-
-The host page cache can be avoided while only sending write notifications to
-the guest when the data has been flushed to the disk using
-@option{cache=directsync}.
-
-In case you don't care about data integrity over host failures, use
-@option{cache=unsafe}. This option tells QEMU that it never needs to write any
-data to the disk but can instead keep things in cache. If anything goes wrong,
-like your host losing power, the disk storage getting disconnected accidentally,
-etc. your image will most probably be rendered unusable. When using
-the @option{-snapshot} option, unsafe caching is always used.
+When using the @option{-snapshot} option, unsafe caching is always used.
Copy-on-read avoids accessing the same backing file sectors repeatedly and is
useful when the backing file is over a slow network. By default copy-on-read
DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
"-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n"
- " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n"
+ " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd][,fmode=fmode][,dmode=dmode]\n"
" [[,throttling.bps-total=b]|[[,throttling.bps-read=r][,throttling.bps-write=w]]]\n"
" [[,throttling.iops-total=i]|[[,throttling.iops-read=r][,throttling.iops-write=w]]]\n"
" [[,throttling.bps-total-max=bm]|[[,throttling.bps-read-max=rm][,throttling.bps-write-max=wm]]]\n"
STEXI
-@item -fsdev @var{fsdriver},id=@var{id},path=@var{path},[security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}]
+@item -fsdev @var{fsdriver},id=@var{id},path=@var{path},[security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}][,fmode=@var{fmode}][,dmode=@var{dmode}]
@findex -fsdev
Define a new file system device. Valid options are:
@table @option
Enables proxy filesystem driver to use passed socket descriptor for
communicating with virtfs-proxy-helper. Usually a helper like libvirt
will create socketpair and pass one of the fds as sock_fd
+@item fmode=@var{fmode}
+Specifies the default mode for newly created files on the host. Works only
+with security models "mapped-xattr" and "mapped-file".
+@item dmode=@var{dmode}
+Specifies the default mode for newly created directories on the host. Works
+only with security models "mapped-xattr" and "mapped-file".
@end table
-fsdev option is used along with -device driver "virtio-9p-pci".
DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs,
"-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n"
- " [,id=id][,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n",
+ " [,id=id][,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd][,fmode=fmode][,dmode=dmode]\n",
QEMU_ARCH_ALL)
STEXI
-@item -virtfs @var{fsdriver}[,path=@var{path}],mount_tag=@var{mount_tag}[,security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}]
+@item -virtfs @var{fsdriver}[,path=@var{path}],mount_tag=@var{mount_tag}[,security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}][,fmode=@var{fmode}][,dmode=@var{dmode}]
@findex -virtfs
The general form of a Virtual File system pass-through options are:
@item sock_fd
Enables proxy filesystem driver to use passed 'sock_fd' as the socket
descriptor for interfacing with virtfs-proxy-helper
+@item fmode=@var{fmode}
+Specifies the default mode for newly created files on the host. Works only
+with security models "mapped-xattr" and "mapped-file".
+@item dmode=@var{dmode}
+Specifies the default mode for newly created directories on the host. Works
+only with security models "mapped-xattr" and "mapped-file".
@end table
ETEXI
@item key-delay-ms
Set keyboard delay, for key down and key up events, in milliseconds.
-Default is 1. Keyboards are low-bandwidth devices, so this slowdown
+Default is 10. Keyboards are low-bandwidth devices, so this slowdown
can help the device and guest to keep up and not lose events in case
events are arriving in bulk. Possible causes for the latter are flaky
network connections, or scripts for automated testing.
"-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
" use path to provide path to a character device; default is /dev/tpm0\n"
" use cancel-path to provide path to TPM's cancel sysfs entry; if\n"
- " not provided it will be searched for in /sys/class/misc/tpm?/device\n",
+ " not provided it will be searched for in /sys/class/misc/tpm?/device\n"
+ "-tpmdev emulator,id=id,chardev=dev\n"
+ " configure the TPM device using chardev backend\n",
QEMU_ARCH_ALL)
STEXI
@item -tpmdev @var{backend} ,id=@var{id} [,@var{options}]
@findex -tpmdev
-Backend type must be:
-@option{passthrough}.
+Backend type must be either one of the following:
+@option{passthrough}, @option{emulator}.
The specific backend type will determine the applicable options.
The @code{-tpmdev} option creates the TPM backend and requires a
Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
@code{tpmdev=tpm0} in the device option.
+@item -tpmdev emulator, id=@var{id}, chardev=@var{dev}
+
+(Linux-host only) Enable access to a TPM emulator using Unix domain socket based
+chardev backend.
+
+@option{chardev} specifies the unique ID of a character device backend that provides connection to the software TPM server.
+
+To create a TPM emulator backend device with chardev socket backend:
+@example
+
+-chardev socket,id=chrtpm,path=/tmp/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
+
+@end example
+
@end table
ETEXI
ETEXI
DEF("sandbox", HAS_ARG, QEMU_OPTION_sandbox, \
- "-sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').\n",
+ "-sandbox on[,obsolete=allow|deny][,elevateprivileges=allow|deny|children]\n" \
+ " [,spawn=allow|deny][,resourcecontrol=allow|deny]\n" \
+ " Enable seccomp mode 2 system call filter (default 'off').\n" \
+ " use 'obsolete' to allow obsolete system calls that are provided\n" \
+ " by the kernel, but typically no longer used by modern\n" \
+ " C library implementations.\n" \
+ " use 'elevateprivileges' to allow or deny QEMU process to elevate\n" \
+ " its privileges by blacklisting all set*uid|gid system calls.\n" \
+ " The value 'children' will deny set*uid|gid system calls for\n" \
+ " main QEMU process but will allow forks and execves to run unprivileged\n" \
+ " use 'spawn' to avoid QEMU to spawn new threads or processes by\n" \
+ " blacklisting *fork and execve\n" \
+ " use 'resourcecontrol' to disable process affinity and schedular priority\n",
QEMU_ARCH_ALL)
STEXI
-@item -sandbox @var{arg}
+@item -sandbox @var{arg}[,obsolete=@var{string}][,elevateprivileges=@var{string}][,spawn=@var{string}][,resourcecontrol=@var{string}]
@findex -sandbox
Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off' will
disable it. The default is 'off'.
+@table @option
+@item obsolete=@var{string}
+Enable Obsolete system calls
+@item elevateprivileges=@var{string}
+Disable set*uid|gid system calls
+@item spawn=@var{string}
+Disable *fork and execve
+@item resourcecontrol=@var{string}
+Disable process affinity and schedular priority
+@end table
ETEXI
DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig,
command line and device configuration into file or dash @code{-}) character to print the
output to stdout. This can be later used as input file for @code{-readconfig} option.
ETEXI
-DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig,
- "-nodefconfig\n"
- " do not load default config files at startup\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -nodefconfig
-@findex -nodefconfig
-Normally QEMU loads configuration files from @var{sysconfdir} and @var{datadir} at startup.
-The @code{-nodefconfig} option will prevent QEMU from loading any of those config files.
-ETEXI
+HXCOMM Deprecated, same as -no-user-config
+DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig, "", QEMU_ARCH_ALL)
DEF("no-user-config", 0, QEMU_OPTION_nouserconfig,
"-no-user-config\n"
- " do not load user-provided config files at startup\n",
+ " do not load default user-provided config files at startup\n",
QEMU_ARCH_ALL)
STEXI
@item -no-user-config
@findex -no-user-config
The @code{-no-user-config} option makes QEMU not load any of the user-provided
-config files on @var{sysconfdir}, but won't make it skip the QEMU-provided config
-files from @var{datadir}.
+config files on @var{sysconfdir}.
ETEXI
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
"-trace [[enable=]<pattern>][,events=<file>][,file=<file>]\n"
@table @option
-@item -object memory-backend-file,id=@var{id},size=@var{size},mem-path=@var{dir},share=@var{on|off}
+@item -object memory-backend-file,id=@var{id},size=@var{size},mem-path=@var{dir},share=@var{on|off},discard-data=@var{on|off}
Creates a memory file backend object, which can be used to back
the guest RAM with huge pages. The @option{id} parameter is a
The @option{share} boolean option determines whether the memory
region is marked as private to QEMU, or shared. The latter allows
a co-operating external process to access the QEMU memory region.
+Setting the @option{discard-data} boolean option to @var{on}
+indicates that file contents can be destroyed when QEMU exits,
+to avoid unnecessarily flushing data to the backing file. Note
+that @option{discard-data} is only an optimization, and QEMU
+might not discard file contents if it aborts unexpectedly or is
+terminated using SIGKILL.
@item -object rng-random,id=@var{id},filename=@var{/dev/random}
@option{tx}: the filter is attached to the transmit queue of the netdev,
where it will receive packets sent by the netdev.
-@item -object filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid}[,queue=@var{all|rx|tx}]
+@item -object filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support]
-filter-mirror on netdev @var{netdevid},mirror net packet to chardev
-@var{chardevid}
+filter-mirror on netdev @var{netdevid},mirror net packet to chardev@var{chardevid}, if it has the vnet_hdr_support flag, filter-mirror will mirror packet with vnet_hdr_len.
-@item -object filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},
-outdev=@var{chardevid}[,queue=@var{all|rx|tx}]
+@item -object filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support]
filter-redirector on netdev @var{netdevid},redirect filter's net packet to chardev
-@var{chardevid},and redirect indev's packet to filter.
+@var{chardevid},and redirect indev's packet to filter.if it has the vnet_hdr_support flag,
+filter-redirector will redirect packet with vnet_hdr_len.
Create a filter-redirector we need to differ outdev id from indev id, id can not
be the same. we can just use indev or outdev, but at least one of indev or outdev
need to be specified.
-@item -object filter-rewriter,id=@var{id},netdev=@var{netdevid}[,queue=@var{all|rx|tx}]
+@item -object filter-rewriter,id=@var{id},netdev=@var{netdevid},queue=@var{all|rx|tx},[vnet_hdr_support]
Filter-rewriter is a part of COLO project.It will rewrite tcp packet to
secondary from primary to keep secondary tcp connection,and rewrite
tcp packet to primary from secondary make tcp packet can be handled by
-client.
+client.if it has the vnet_hdr_support flag, we can parse packet with vnet header.
usage:
colo secondary:
The file format is libpcap, so it can be analyzed with tools such as tcpdump
or Wireshark.
-@item -object colo-compare,id=@var{id},primary_in=@var{chardevid},secondary_in=@var{chardevid},
-outdev=@var{chardevid}
+@item -object colo-compare,id=@var{id},primary_in=@var{chardevid},secondary_in=@var{chardevid},outdev=@var{chardevid}[,vnet_hdr_support]
Colo-compare gets packet from primary_in@var{chardevid} and secondary_in@var{chardevid}, than compare primary packet with
secondary packet. If the packets are same, we will output primary
packet to outdev@var{chardevid}, else we will notify colo-frame
do checkpoint and send primary packet to outdev@var{chardevid}.
+if it has the vnet_hdr_support flag, colo compare will send/recv packet with vnet_hdr_len.
we must use it with the help of filter-mirror and filter-redirector.
The simplest secure usage is to provide the secret via a file
- # echo -n "letmein" > mypasswd.txt
+ # printf "letmein" > mypasswd.txt
# $QEMU -object secret,id=sec0,file=mypasswd.txt,format=raw
For greater security, AES-256-CBC should be used. To illustrate usage,
as raw bytes if desired.
@example
- # SECRET=$(echo -n "letmein" |
+ # SECRET=$(printf "letmein" |
openssl enc -aes-256-cbc -a -K $KEY -iv $IV)
@end example
projects / mirror_qemu.git / blobdiff